Dmic find_modes function was used with same sampling rate for both fifo
a and b parameter calculations. This bug was found in testing two
simultaneous dmic dais in topology. Fix this by introducing a sampling
rate argument for find_modes.
Fixes: https://github.com/alsa-project/alsa-utils/pull/148
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add Intel nhlt acpi table encoder plugin into topology2.0 processing.
Nhlt internal structure is defined in:
https://01.org/sites/default/files/595976_intel_sst_nhlt.pdf
Nhlt acpi table contain vendor specific binary data blobs that are used
in some Intel dsp platforms for configuring the dmic and ssp hardware.
The function of this code is mainly to generate the vendor specific
binary blobs, but as there is existing nhlt parser code and header in
kernel there's no point of re-inventing the container: just use the
existing nhlt acpi table format. Basically this code is creating similar
nhlt acpi table that you would get from: cat
/sys/firmware/acpi/tables/NHLT
This code will have implementation for dmic and ssp endpoints. Thus the
code will translate the topology dai tokens into vendor specific binary
blobs and pack them into nhlt acpi table. Ssp and dmic code is lifted
from Sound Open Firmware (sof) code base, thus it will have BSD-3
license.
This plugin can be enabled from command line with:
alsatplg -DPREPROCESS_PLUGINS="nhlt" -c foo.conf -p -o bar.tplg
You can also dump the nhlt binary into a file with additional define:
-DNHLT_BIN="nhlt.bin"
Link: https://github.com/alsa-project/alsa-utils/pull/129
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add a simple plugin interface for processing the topology tree. There
can be cases where parts of the topology need to be translated from the
original format into something else. For example one could calculate
some kind of filter coefficients from filter parameters or some other
binary interface parameters from plain text topology tokens.
Mechanism is similar as in alsa-plugins and in the plugin there should
be only 1 function exported of the form:
int _snd_topology_##pluginname##_process (snd_config_t *input, snd_config_t *output)
Input and output parameters are snd_config tree before and after topology2
pre-processing. So the plugin can modify both if needed. There are cases
where the plugin may need to get information from input tree, but make
modifications to the output.
The plugins to be used can be defined in command line with:
alsatplg -DPREPROCESS_PLUGINS="foobar" -c topology.conf -p -o topology.tplg
Multiple plugins should be separated by ":".
Plugins to be used can also be defined with "Define" clause inside the
topology file (but command line takes precedence):
Define {
PREPROCESS_PLUGINS "foobar"
}
Link: https://github.com/alsa-project/alsa-utils/pull/129
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
In case there are not command line definitions, there is nothing to
merge or delete.
Fixes: https://github.com/alsa-project/alsa-utils/pull/141
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The bellow commit assumed that the merge of the included file
is to the main configuration tree, but it's for the subtree.
The Define compound from the included file must be handled
separately.
Link: https://github.com/alsa-project/alsa-utils/pull/140
Fixes: e1a0711 ("topology: fix the command line define merge for new includes")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
With the introduction of variables in the topology files, validation of
attributes values must be done after they are expanded to their defined
values. Also, since valid values for attributes in the class definition
can also be variables, they need to be expanded as well. So, first expand
the attribute values and then check them against expanded valid values.
Fixes: https://github.com/alsa-project/alsa-utils/pull/138
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Parse the configuration tree only one time and then reuse
it for the merge.
Also, do not pass inc_path to all functions - add it
to the pre-processor structure.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The defines from the command line must overwrite the defines
from the included configuration files forcefully.
Link: https://github.com/alsa-project/alsa-utils/pull/129
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Remove the call to snd_config_expand_custom() to expand the top-level
input config. And replace it with calls to snd_config_evaluate_string()
for each non-compound config while processing individual objects. This
will allow retreving variable definitions from object attribute values
and global definitions.
Add a new field "current_obj_cfg" to hold the current object config
being pre-processed.
This will facilitate adding simple math expressions for computing
attribute values for objects based on other attributes. For ex: we can
set the expression for buffer size as follows:
buffer_size "$[($in_channels * 48) * 4]"
The buffer_size attribute value will be computed with the attribute
value "in_channels" based on the expression above. So if $in_channels =
2, buffer_size will be evaluated to 384.
Additionally this change also permits computing attribute values based
on previously computed values. For example:
buffer_size "$[($in_channels * 48) * 4]"
dma_buffer_size "$[$buffer_size * 2]"
dma_buffer_size will be computed as 768. Note that the order of
definitions for buffer_size and dma_buffer_size matters because the
evaluation for dma_buffer_size depends on the evaluation of buffer_size.
In order to conform to this, the tplg_object_copy_and_add_param() is
modified to add attribute configs from class config to an object using
snd_config_before() instead of snd_config_add().
With this change, we no longer need to set the auto_attr_updater for
buffer type widget objects. So remove it.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The owner r/w file permissions are too restrictive.
Let umask do it's work and set the r/w permissions to any.
Fixes: https://github.com/alsa-project/alsa-utils/issues/126
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The include path passed with -I option will override the relative
include path based on the source file.
Fixes: https://github.com/alsa-project/alsa-utils/pull/125
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add a new keyword "IncludeByKey" that will be used to conditional
include configuration files based on the argument value supplied during
build time. For example:
IncludeByKey.DMIC_CH_COUNT {
"[1-4]" "include/platform/intel/dmic-generic.conf"
}
The above config will include the dmic-generic.conf file if the argument
value for DMIC_CH_COUNT is between 1 and 4.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add a -D switch to be able to pass pre-processor definitions that will
be used to expand arguments in the input config file. This will be
useful to generate multiple topology binaries from the same input config
file with different argument values.
For example: if we had a pipeline config as follows:
Object.Pipeline {
volume-playback.1 {
dynamic_pipeline $DYNAMIC_PIPELINE
}
}
We can define the variable for DYNAMIC_PIPELINE as:
Define {
DYNAMIC_PIPELINE 0
}
And when pre-processing the conf file pass "-D DYNAMIC_PIPELINE=1" to
override the default value for dynamic_pipeline attribute in the input
conf file.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
An object can be declared within a class definition as follows:
Class.Pipeline.volume-playback {
Object.Widget.pga.0 {
ramp_step_ms 250
}
}
While instantiating the volume-pipeline class, the pga object
could be modified as follows:
Object.Pipeline.volume-playback.0 {
Object.Widget.pga.0 {
format "s24le"
}
}
When building the pga.0 object in the class definition, merge
the attributes declared in the volume-playback.0 object to create
a new config as follows to make sure that all attributes are
set for the pga object.
Object.Widget.pga.0 {
ramp_step_ms 250
format "s24le"
}
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Do not create TLV config if it exists already. Just
set the string value with the name name.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Allow support for adding data section for kcontrols.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Fix typo in config variable name. Should be n2 instead of n.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Skip creating section when it exists already.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Nothing to do for top-level objects with no parent.
Also, add access to the bytes control template.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Switch source and sink widgets in the DAPM route.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Some objects just need tobe processed to add their attributes
to the private data section of their parent objects.
An example of this would be the pdm_config objects for
DMIC DAI's. Each pdm_config object's attributes need
to be added as separate arrays in the DAI object's
private data.
Modify the signature of tplg_add_object_data() to pass
the array_name parameter when multiple objects of the
same type in the same parent are processed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add the function to compute the value for the
"size" automatic attribute in the buffer objects.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Classes definitions in Topology2.0 can have attributes
qualified with the "automatic" constraint. Values for
these attributes will be calculated by the compiler.
This patch provides a generic method for defining automatic
attributes computation logic for different classes.
To update automatic attributes for a class, add an item
in object_build_map with auto_attr_updater defined, and then
add updating logic in the custom auto_attr_updater function.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This patch adds check to the return pointer from strchr,
because it may be null and cause segment fault, if component
is not properly constructed.
Fixes: https://github.com/alsa-project/alsa-utils/pull/91
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add support for processing object instances embedded
within objects and classes. For example:
Object.Control.mixer."0" {
#Channel register and shift for Front Left/Right
Object.Base.channel."fl" {
shift 0
}
Object.Base.channel."fr" {
}
Object.Base.tlv."vtlv_m64s2" {
Object.Base.scale."m64s2" {
mute 1
}
}
Object.Base.ops."ctl" {
info "volsw"
#256 binds the mixer control to volume get/put handlers
get 256
put 256
}
}
and pga class embeds the mixer objects as follows:
Class.Widget."pga" {
...
Object.Control {
mixer."0" {...}
mixer."1" {...}
}
The pre-processor starts with the top-pevel PGA widget object
and processes the mixer objects in the class definition.
This will recursively pre-processes its child objects to add the channels,
tlv and ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add support for fe_dai objects:
For ex:
Object.PCM.pcm."0" {
name "Port0"
direction "duplex"
Object.Base.fe_dai."Port 0" {}
}
will be converted to update the SectionPCM as follows:
SectionPCM {
Port0 {
id 0
dai {
'Port 0' {
id 0
}
}
}
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
