To zero-initialize an object, use `{0}` instead.
Signed-off-by: Michael Forney <mforney@mforney.org>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The `L` length modifier only applies to floating-point conversion
specifiers, and `ll` is used for `long long` integers.
Although glibc accepts %Li, musl does not and returns EINVAL.
Signed-off-by: Michael Forney <mforney@mforney.org>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pointer operand to the binary `+` operator must be to a complete
object type.
Signed-off-by: Michael Forney <mforney@mforney.org>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
They are equivalent, but __func__ is in C99. __FUNCTION__ exists only
for backwards compatibility with old gcc versions.
Signed-off-by: Michael Forney <mforney@mforney.org>
Reviewd-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add '-u,--dump' operation.
Add '-g,--group' and '-x,--nocheck' modifiers.
Add '-z,--dapm-nosort' modifier.
Allow to operate with stdin/stdout for the file input/output.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Check the return value of wget to determine if the upload actually
failed. If so, display the message about upload failure, then exit.
Do not ping the web server; the result does not indicate whether a
file upload will succeed or not.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If wget is not present, do not ask about uploading the information.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The spinner did not actually provide information about the status
of the file upload, and caused other problems: it would repeatedly
spawn new pgrep processes (without a delay between them), and it
blocked the script if any wget process was running on the system.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The gauge did not actually show the upload progress; in fact, the
dialog did not even appear until after the upload was completed.
Use an infobox instead, which will be displayed while wget runs.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The '--stdout' option is mutually exclusive with uploading the file.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Read card names directly from individual procfs files, and pass them
to amixer using the '-c' option.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sorting the list of loaded modules makes it much easier to compare
two alsa-info.txt files, even if they are both from the same system
(since the order actually changes after each reboot).
lsmod just formats the contents of /proc/modules. After this script
calls lsmod, it strips everything but module names from the output.
This same result can be obtained just as easily by reading directly
from /proc/modules; then there is no need to remove the header line
printed by lsmod before sorting the output.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Include numeric IDs and subsystem info in the PCI device output,
without placing them in a separate section.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This function loads and parses the topology file and
saves back the structured output in the alsa-lib's format
without comments.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
While the progress bar cannot be negative, GCC concludes that it can be
and assumes tmp can be written past the end. Fixes this GCC warning:
aplay.c:1747:18: warning: '%02d' directive writing between 2 and 11 bytes
into a region of size 4 [-Wformat-overflow=]
1747 | sprintf(tmp, "%02d%%", maxperc[c]);
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It also reduces compiled size slightly.
aplay.c: In function 'capture':
aplay.c:3055:34: error: '-01' directive output may be truncated writing 3
bytes into a region of size between 1 and 4097 [-Werror=format-truncation=
]
3055 | snprintf(namebuf, namelen, "%s-01", buf);
| ^~~
aplay.c:3055:4: note: 'snprintf' output between 4 and 4100 bytes into a
destination of size 4097
3055 | snprintf(namebuf, namelen, "%s-01", buf);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
aplay.c:3053:34: error: '-01.' directive output may be truncated writing 4
bytes into a region of size between 1 and 4097 [-Werror=format-truncation=
]
3053 | snprintf(namebuf, namelen, "%s-01.%s", buf, s);
| ^~~~
aplay.c:3053:4: note: 'snprintf' output 5 or more bytes (assuming 4101)
into a destination of size 4097
3053 | snprintf(namebuf, namelen, "%s-01.%s", buf, s);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
aplay.c:3065:34: error: '%02i' directive output may be truncated writing
between 2 and 10 bytes into a region of size between 0 and 4096 [-Werror=
format-truncation=]
3065 | snprintf(namebuf, namelen, "%s-%02i", buf, filecount);
| ^~~~
aplay.c:3065:30: note: directive argument in the range [1, 2147483647]
3065 | snprintf(namebuf, namelen, "%s-%02i", buf, filecount);
| ^~~~~~~~~
aplay.c:3065:3: note: 'snprintf' output between 4 and 4108 bytes into a
destination of size 4097
3065 | snprintf(namebuf, namelen, "%s-%02i", buf, filecount);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
aplay.c:3063:34: error: '%02i' directive output may be truncated writing
between 2 and 10 bytes into a region of size between 0 and 4096 [-Werror=
format-truncation=]
3063 | snprintf(namebuf, namelen, "%s-%02i.%s", buf, filecount, s);
| ^~~~
aplay.c:3063:30: note: directive argument in the range [1, 2147483647]
3063 | snprintf(namebuf, namelen, "%s-%02i.%s", buf, filecount, s);
| ^~~~~~~~~~~~
aplay.c:3063:3: note: 'snprintf' output 5 or more bytes (assuming 4109)
into a destination of size 4097
3063 | snprintf(namebuf, namelen, "%s-%02i.%s", buf, filecount, s);
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
uint64_t evaluates to unsigned long long on 32-bit, not unsigned long.
Use the proper formats.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When running for IRQ-based scheduling model, transmission backend is
expected to queue PCM event in different context from the main thread.
When queueing no events during time equivalent to one period of PCM
buffer, the backend has problems.
This commit outputs report it for non-blocking operation for IRQ-based
scheduling model. The timeout is equivalent to all frames in buffer,
instead of period for safe.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This commit applies code refactoring for waiting PCM event queued
per period of PCM buffer in copying operation for IRQ-based scheduling
model.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
When running for IRQ-based scheduling model, transmission backend is
expected to queue PCM event in different context from the main thread.
When queueing no events during time equivalent to one period of PCM
buffer, the backend has problems.
This commit outputs report it for mmap operation for IRQ-based
scheduling model. The timeout is equivalent to all frames in buffer,
instead of period for safe.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Although the waiter abstraction handles timeout as success, it should
report for callers to know timeout.
This commit takes the waiter to return -ETIMEDOUT when timeout expires.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
A call of select(2) returns negative code and report errors via errno
local variable, howver current waiter implementation for select(2)
returns the negative code instead of errno.
This commit fixes it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
A call of select(2) returns error code at failure, the number of file
descriptors available I/O at success. Current implementation of
waiter abstraction for select(2) returns 0 at success and callers
can't get the number.
This commit fixes it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
setup_chmap() will return with error number if hw_map calloc fail or
channels doesn't match with hw_params, but memory free was ignored when
error occurs.
Signed-off-by: chunxu.li <chunxuxiao@gmail.com>
Reviewed-by: Takashi Sakamoto o-takashi@sakamocchi.jp
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
