Commit graph

288691 commits

Author SHA1 Message Date
Andiry Xu
085deb1684 xHCI: check enqueue pointer advance into dequeue seg
When a urb is submitted to xHCI driver, check if queueing the urb will make
the enqueue pointer advance into dequeue seg and expand the ring if it
occurs. This is to guarantee the safety of ring expansion.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13 09:30:44 -07:00
Andiry Xu
2fdcd47b69 xHCI: Allocate 2 segments for transfer ring
Allocate 2 segments for transfer ring by default, so we can expand the ring
when the enqueue pointer and dequeue pointer are in different segments.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13 09:30:34 -07:00
Andiry Xu
8dfec6140f xHCI: dynamic ring expansion
If room_on_ring() check fails, try to expand the ring and check again.

When expand a ring, use a cached ring or allocate new segments, link
the original ring and the new ring or segments, update the original ring's
segment numbers and the last segment pointer.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13 09:30:24 -07:00
Andiry Xu
186a7ef13a xHCI: set cycle state when allocate rings
In the past all the rings were allocated with cycle state equal to 1.
Now the driver may expand an existing ring, and the new segments shall be
allocated with the same cycle state as the old one.

This affects ring allocation and cached ring re-initialization.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13 09:30:15 -07:00
Andiry Xu
70d4360177 xHCI: factor out segments allocation and free function
Factor out the segments allocation and free part from ring allocation
and free routines since driver may call them directly when try to expand
a ring.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13 09:30:05 -07:00
Andiry Xu
b008df60c6 xHCI: count free TRBs on transfer ring
In the past, the room_on_ring() check was implemented by walking all over
the ring, which is wasteful and complicated.

Count the number of free TRBs instead. The free TRBs number should be
updated when enqueue/dequeue pointer is updated, or upon the completion
of a set dequeue pointer command.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13 09:29:55 -07:00
Andiry Xu
3fe4fe083d xHCI: store ring's last segment and segment numbers
Store the ring's last segment pointer and number of segments for ring
expansion usage.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13 09:29:46 -07:00
Andiry Xu
3b72fca09d xHCI: store ring's type
When allocate a ring, store its type - four transfer types for endpoint,
TYPE_STREAM for stream transfer, and TYPE_COMMAND/TYPE_EVENT for xHCI host.

This helps to get rid of three bool function parameters: link_trbs, isoc
and consumer.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-12 16:50:24 -07:00
Felipe Balbi
8d3709f3dd usb: host: xhci: use __ffs() instead of hardcoding shift
__ffs() can tell us which is the SEGMENT_SHIFT value
to be used. This will prevent problems when users are
too fast and don't pay attention to the need of fixing
the Shift after changing TRBS_PER_SEGMENT.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-03-12 09:31:24 -07:00
Andiry Xu
f99298bfa7 xHCI: BESL calculation based on USB2.0 LPM errata
The latest released errata for USB2.0 ECN LPM adds new fields to USB2.0
extension descriptor, defines two BESL values for device: baseline BESL
and deep BESL. Baseline BESL value communicates a nominal power savings
design point and the deep BESL value communicates a significant power
savings design point.

If device indicates BESL value, driver will use a value count in both
host BESL and device BESL. Use baseline BESL value as default.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Tested-by: Jason Fan <jcfan@qca.qualcomm.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-03-12 09:31:24 -07:00
Greg Kroah-Hartman
f7a0d426f3 Merge 3.3-rc7 into usb-next
This resolves the conflict with drivers/usb/host/ehci-fsl.h that
happened with changes in Linus's and this branch at the same time.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12 09:13:31 -07:00
Linus Torvalds
fde7d9049e Linux 3.3-rc7 2012-03-10 13:49:52 -08:00
Al Viro
c7b2855505 aio: fix the "too late munmap()" race
Current code has put_ioctx() called asynchronously from aio_fput_routine();
that's done *after* we have killed the request that used to pin ioctx,
so there's nothing to stop io_destroy() waiting in wait_for_all_aios()
from progressing.  As the result, we can end up with async call of
put_ioctx() being the last one and possibly happening during exit_mmap()
or elf_core_dump(), neither of which expects stray munmap() being done
to them...

We do need to prevent _freeing_ ioctx until aio_fput_routine() is done
with that, but that's all we care about - neither io_destroy() nor
exit_aio() will progress past wait_for_all_aios() until aio_fput_routine()
does really_put_req(), so the ioctx teardown won't be done until then
and we don't care about the contents of ioctx past that point.

Since actual freeing of these suckers is RCU-delayed, we don't need to
bump ioctx refcount when request goes into list for async removal.
All we need is rcu_read_lock held just over the ->ctx_lock-protected
area in aio_fput_routine().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Benjamin LaHaise <bcrl@kvack.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-09 18:59:59 -08:00
Al Viro
86b62a2cb4 aio: fix io_setup/io_destroy race
Have ioctx_alloc() return an extra reference, so that caller would drop it
on success and not bother with re-grabbing it on failure exit.  The current
code is obviously broken - io_destroy() from another thread that managed
to guess the address io_setup() would've returned would free ioctx right
under us; gets especially interesting if aio_context_t * we pass to
io_setup() points to PROT_READ mapping, so put_user() fails and we end
up doing io_destroy() on kioctx another thread has just got freed...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Benjamin LaHaise <bcrl@kvack.org>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-09 18:59:59 -08:00
Linus Torvalds
86e0600833 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs updates from Chris Mason:
 "I have two additional and btrfs fixes in my for-linus branch.  One is
  a casting error that leads to memory corruption on i386 during scrub,
  and the other fixes a corner case in the backref walking code (also
  triggered by scrub)."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix casting error in scrub reada code
  btrfs: fix locking issues in find_parent_nodes()
2012-03-09 18:09:18 -08:00
Greg Kroah-Hartman
b790f5d126 USB: serial: use module_driver() macro
Now that module_driver() can handle varargs, use it instead of rolling
our own version.

Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 16:38:14 -08:00
Lars-Peter Clausen
cd4946188a driver-core: Allow additional parameters for module_driver
Allow module_driver take additional parameters which will be passed to the
register and unregister function calls. This allows it to be used in cases
where additional parameters are required (e.g. usb_serial_register_drivers).

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 16:37:56 -08:00
Hugh Dickins
be22aece68 memcg: revert fix to mapcount check for this release
Respectfully revert commit e6ca7b89dc "memcg: fix mapcount check
in move charge code for anonymous page" for the 3.3 release, so that
it behaves exactly like releases 2.6.35 through 3.2 in this respect.

Horiguchi-san's commit is correct in itself, 1 makes much more sense
than 2 in that check; but it does not go far enough - swapcount
should be considered too - if we really want such a check at all.

We appear to have reached agreement now, and expect that 3.4 will
remove the mapcount check, but had better not make 3.3 different.

Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-09 15:32:20 -08:00
Bjørn Mork
b086cf04fc net: qmi_wwan: add Gobi and Pantech UML290 device IDs
Adding the Pantech UML290 and all non-QDL Gobi device IDs from the
qcserial driver now that we have support for shared net/QMI USB
interfaces.  Most of these are not yet tested with this driver, but
should be mostly identical to tested devices, except for device IDs.

Gobi devices provide several different interfaces (serial/net/other)
using the exact same class, subclass and protocol values.  This driver
will only support the net/QMI function while there are other drivers
supporting other device functions. The net/QMI interface number may
also differ from device to device.  It has been noted that all the
other interfaces have additional functional descriptors, so we use that
to detect the interface supported by this driver.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 13:11:01 -08:00
Bjørn Mork
c3ecb08abe net: qmi_wwan: support devices having a shared QMI/wwan interface
Use the new cdc-wdm subdriver interface to create a device management
device even for USB devices having a single combined QMI/wwan USB
interface with three endpoints (int, bulk in, bulk out) instead of
separate data and control interfaces.

Some Huawei devices can be switched to a single interface mode for
use with other operating systems than Linux.  This adds support
for these devices when they run in such non-Linux modes.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 13:11:01 -08:00
Bjørn Mork
423ce8caab net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices
Some WWAN LTE/3G devices based on chipsets from Qualcomm provide
near standard CDC ECM interfaces in addition to the usual serial
interfaces.   The Huawei E392/E398 are examples of such devices.

These typically cannot be fully configured using AT commands
over a serial interface.  It is necessary to speak the proprietary
Qualcomm MSM Interface (QMI) protocol to the device to enable the
ethernet proxy functionality.

The devices embed the QMI protocol in CDC on the control interface,
using standard CDC commands and notifications. The do not otherwise
use CDC commands for the ethernet function.  This driver does
therefore not need access to any other aspects of the control
interface than the descriptors attached to it.

Another driver, cdc-wdm, will provide userspace access to the
QMI protocol independently of this driver.  To facilitate this,
this driver avoids binding to the control interface, and uses
only the associated data interface after parsing the common CDC
functional descriptors on the control interface.

You will want both the cdc-wdm and option drivers as companions to
this driver, to have full access to all interfaces and protocols
exported by the device.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 13:09:17 -08:00
Thomas Gleixner
a7f4255f90 x86: Derandom delay_tsc for 64 bit
Commit f0fbf0abc0 ("x86: integrate delay functions") converted
delay_tsc() into a random delay generator for 64 bit.  The reason is
that it merged the mostly identical versions of delay_32.c and
delay_64.c.  Though the subtle difference of the result was:

 static void delay_tsc(unsigned long loops)
 {
-	unsigned bclock, now;
+	unsigned long bclock, now;

Now the function uses rdtscl() which returns the lower 32bit of the
TSC. On 32bit that's not problematic as unsigned long is 32bit. On 64
bit this fails when the lower 32bit are close to wrap around when
bclock is read, because the following check

       if ((now - bclock) >= loops)
       	  	break;

evaluated to true on 64bit for e.g. bclock = 0xffffffff and now = 0
because the unsigned long (now - bclock) of these values results in
0xffffffff00000001 which is definitely larger than the loops
value. That explains Tvortkos observation:

"Because I am seeing udelay(500) (_occasionally_) being short, and
 that by delaying for some duration between 0us (yep) and 491us."

Make those variables explicitely u32 again, so this works for both 32
and 64 bit.

Reported-by: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org # >= 2.6.27
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-09 12:43:27 -08:00
Michał Wróbel
47594d5528 USB: ftdi_sio: new PID: Distortec JTAG-lock-pick
Signed-off-by: Michał Wróbel <michal.wrobel@flytronic.pl>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 12:39:52 -08:00
Linus Torvalds
c447064de4 sound fixes for 3.3-rc7
Nothing exciting here: just a few regression fixes for HD-audio and ASoC,
 also the support of missing 32bit compat ioctl for HDSPM.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIcBAABAgAGBQJPWkMOAAoJEGwxgFQ9KSmk28sP/jGD+gCptQOFsA37fmkPKRNZ
 1ILs2iAPeEXL71R6gHUED/sarI4/wcUMQUMZkg4EZ81jiug7wWeT87VrjD6JiuEl
 PcYZU7PxWJgQ8xoPUEU9+HmjOnxrl1dRqrRYSEzApkCKq47inT9xPRQJek9LH9dD
 w8FCOf5n3i1Xbtb3TZsaUY2gKBF62x/xHA6ko8YXt531KLCbFskEMQ5uz442Aqa0
 HuhWMVgNJOxkGUkViE5hFz5dha8xi6RsdWW5wBCaRfMJoIE1LqP3p4L6YHfAYUN9
 aTgELyNMUgjZN77JgTyEn9VDc3fCJi9E4/bmTwJrPKpvkmZcUKkleUn8h7muS/9s
 8WI2rXFt+HJoOz+1xdfQ2o1J3uMcFePsIqWHiQlgjRLWn6I9E5hvWm36ExtgdaSr
 ySTCiLhGO6E1v27b9DYhU6gSxdjZgISNcRrEkGZKUcYf5iSOPkBJbhg3P4fz/Sas
 aCKGDgWVerWrGVVxsphJJ4uWxx9WZVLpKhGie8Zl9Umo4I6p33U+SX1kkRMJtKFl
 WMBph5qVOcVKDP8t2EPsK8/eZz7rMfNdAVT0YYUwB/iW/BPwb8M3KJt05Le8bhtc
 ma19c2MjEIHeeSsd6mVLW3NVrnSLNSrdiZLTzWnlg6zVbBcY9TAdkiUX1wZWERCN
 2NdPx0nP3Z1xbsVLorb9
 =aCRY
 -----END PGP SIGNATURE-----

Merge tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Nothing exciting here: just a few regression fixes for HD-audio and
  ASoC, also the support of missing 32bit compat ioctl for HDSPM."

* tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hdspm - Provide ioctl_compat
  ALSA: hda/realtek - Apply the coef-setup only to ALC269VB
  ALSA: hda - add quirk to detect CD input on Gigabyte EP45-DS3
  ASoC: neo1973: fix neo1973 wm8753 initialization
2012-03-09 12:14:23 -08:00
David Brown
8cd5c8661d MAINTAINERS: new git entry for arm/mach-msm
The msm git tree moved to

  git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git

Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-09 12:13:36 -08:00
Linus Torvalds
0ab5d757db Fix for C6X KSTK_EIP and KSTK_ESP macros.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJPV41FAAoJEOiN4VijXeFPsuEQAJDPafvpu9KEqSV/TOGKyelu
 rQk94tvHSVuGeAZiFpjjzQ/u0ofGNOxBqwbVnQjHwt6ameWX9VOxjbR4ZzdF5h9i
 1KbeapNIOKjebHUAf2Sh5mO8MkY8TcTFUzFBk5rOhP8BpNKfpFgfVFxh6JZVFo/b
 7a0kokAFoH24XQXAx4GK11uNE697fQqfcqyxqZ3lRhZ6jtEiIjMkUeRFgLy/G6gE
 Xo3H03ETawbJWzl4PXOiYNFH1Xf3DhT1VM7hLJVuPIrB3KT2oBweGQGn2DKextXe
 /4WE3XwGr9euHbJcJ7c5P0Gu2P76QDhLjgjz/hQfJdMfkD4ZsH0/VrLdTDs5AWOT
 WgzJg40WUDWgL7GuJgL+pCjt6pGszQq5EXGwakHesJU6zT4xZu9NyxChoTzyZdjW
 HIx3NJe5JaeCv0hKpmHlSaaJMXiYKWwKs1d3GOiAKP84AvQlqdsV3UyPCFRNCKNv
 cO2lkkC6pdHnGlJezmNxXqYZaaHwFsbTIcmOLiNlb8B2Q1uttsm3cbS0AReosdC8
 5PLGlvEbXfe/MURrquorpGMKEq5DjnbNdwHx5RcUh/882hZEieDbGVO6R6vApTy2
 dDR5vVhaOfcc86ST0WFLRrjUfqzPUGxBrMvGDn7pwKHlKC5h9IWOptTB/nSgJGuf
 7kCcp9qpXff8fvP2l4/A
 =2BoN
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming

Pull C6X fix from Mark Salter:
 "Fix for C6X KSTK_EIP and KSTK_ESP macros."

* tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
  C6X: fix KSTK_EIP and KSTK_ESP macros
2012-03-09 07:27:38 -08:00
Linus Torvalds
0cacaf51a0 IOMMU fixes for Linux v3.3-rc6
Two fixes are queued up. The first is an additional fix for the OMAP
 initialization order issue and the second patch fixes a possible section
 mismatch which can lead to a kernel crash in the AMD IOMMU driver when
 suspend/resume is used and the compiler has not inlined the
 iommu_set_device_table function.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPWgA/AAoJECvwRC2XARrj7voQAN6evWicqjRDiXQgEC3muQFU
 OrA/Jz/i7+pHEYXcsTt0xHLb8juZNJAdkJjToB+oz7i/7D+TYRmJe+QRNkVmw7Ld
 d3DbUSUi9B3agvGblosKV3DYM8By1vTn9Gy2GNatW1yPuo5o4FHK2ePC5sn8Z/8z
 qwTZZnmvqluz7frNiw6Y3bNOqLd46z+9thUOoKmRn/fo3vKCOOVvb85yu1m/uqy6
 Dmpn6ep0w53jK29ZTKWcL8PW0YrLTEfszhMcVshFT+Y7GVSGnSxwgSh1fnZm/WL6
 z11L57dI0+7RS/z+cw+ko7ymIloV2v4ABRArMPIoLgbIQT0lidDNSqOQnPvWaBek
 MwdLL8W64lt2h4T7bLhDNRSDggWCX+EJYlk87O4hJYt4n57c3yT55z2+BGdoFivZ
 tzPshNWN4KVDMZCU6sTvzvz6eErwvro5wlVM2WxDVfXTxn6UTblP5uIQDGb2zVA9
 G95kK/OlK/s+giwOSOKxtR62livKEAuJ2Croa5LsdJnLdCo6ipvIz9cuAG6eij2W
 tulJQUN3FZr288iUAOPQ9xj6hWYM9RXqoYBxAHAvgYgGuirj9E6hjk/fL0y6XGQk
 jcg0bCdJjh2RzsLZR0eeslybtlrvUsBWYCPYCAAmRjUYHwZ6s822aO7qh0VnrFuQ
 csH09+3B0twvJ+ZRJibN
 =PZDd
 -----END PGP SIGNATURE-----

Merge tag 'iommu-fixes-v3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull two IOMMU fixes from Joerg Roedel:
 "The first is an additional fix for the OMAP initialization order issue
  and the second patch fixes a possible section mismatch which can lead
  to a kernel crash in the AMD IOMMU driver when suspend/resume is used
  and the compiler has not inlined the iommu_set_device_table function."

* tag 'iommu-fixes-v3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  x86/amd: iommu_set_device_table() must not be __init
  ARM: OMAP: fix iommu, not mailbox
2012-03-09 07:26:25 -08:00
Linus Torvalds
45b8da90f2 Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull radeon drm stuff from Dave Airlie:
 "Just some radeon fixes, one is for an oops where we run out of ioremap
  space on some big hardware systems in 32-bit mode, stuff doesn't work
  properly but at least the machine will boot.

  One regression fix, and two bugs, one hw, one blit code."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon/kms: fix hdmi duallink checks
  drm/radeon/kms: set SX_MISC in the r6xx blit code (v2)
  drm/radeon: deal with errors from framebuffer init path.
  drm/radeon: fix a semaphore deadlock on pre cayman asics
2012-03-09 07:23:17 -08:00
Linus Torvalds
e304dfdb03 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking from David Miller:

1) IPV4 routing metrics can become stale when routes are changed by the
   administrator, fix from Steffen Klassert.

2) atl1c does "val |= XXX;" where XXX is a bit number not a bit mask,
   fix by using set_bit.  From Dan Carpenter.

3) Memory accounting bug in carl9170 driver results in wedged TX queue.
   Fix from Nicolas Cavallari.

4) iwlwifi accidently uses "sizeof(ptr)" instead of "sizeof(*ptr)", fix
   from Johannes Berg.

5) Openvswitch doesn't honor dp_ifindex when doing vport lookups, fix
   from Ben Pfaff.

6) ehea conversion to 64-bit stats lost multicast and rx_errors
   accounting, fix from Eric Dumazet.

7) Bridge state transition logging in br_stp_disable_port() is busted,
   it's emitted at the wrong time and the message is in the wrong tense,
   fix from Paulius Zaleckas.

8) mlx4 device erroneously invokes the queue resize firmware operation
   twice, fix from Jack Morgenstein.

9) Fix deadlock in usbnet, need to drop lock when invoking usb_unlink_urb()
   otherwise we recurse into taking it again.  Fix from Sebastian Siewior.

10) hyperv network driver uses the wrong driver name string, fix from
    Haiyang Zhang.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net/hyperv: Use the built-in macro KBUILD_MODNAME for this driver
  net/usbnet: avoid recursive locking in usbnet_stop()
  route: Remove redirect_genid
  inetpeer: Invalidate the inetpeer tree along with the routing cache
  mlx4_core: fix bug in modify_cq wrapper for resize flow.
  atl1c: set ATL1C_WORK_EVENT_RESET bit correctly
  bridge: fix state reporting when port is disabled
  bridge: br_log_state() s/entering/entered/
  ehea: restore multicast and rx_errors fields
  openvswitch: Fix checksum update for actions on UDP packets.
  openvswitch: Honor dp_ifindex, when specified, for vport lookup by name.
  iwlwifi: fix wowlan suspend
  mwifiex: reset encryption mode flag before association
  carl9170: fix frame delivery if sta is in powersave mode
  carl9170: Fix memory accounting when sta is in power-save mode.
2012-03-09 07:14:44 -08:00
Linus Torvalds
9f8050c4f9 Last minute fixes for 3.3
One samsung build fix due to a mis-applied patch, and a small set of OMAP fixes.
 This should be the last from arm-soc for 3.3, hopefully.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPWQktAAoJEIwa5zzehBx3OK4P/i3+nTB2WW8i8ll8pTHybSAj
 YuQGOtsvJDCkZQ6tIgMahNH/Pr2Q2gFe6cjP/akbWWCfUvOl36ZAl9NYY8eexoco
 ZGkMEXfhgtAsVepzEF1/64lwOgrh+AikzlL0q0tA2FmClcAejwFE7ht6zPcwFgJj
 9lmR201/6OLc+qkmvrKRbmpO+eYZUVuQ4cOEMOxebXZN/tn5S/R2QWC3+PkUMbWz
 7bngLHjO97legI0SGzfaKOx/02y/4hIDSybIPDOKDuXi1jUJlkrmnP09sQQLYdKN
 uxu56mn+vUPCIGNwmE1/ufSneM8pZEAHaRkUjFOrxtsdGKVsxFz1vyJ3OAQHd8FU
 WU+fKOew/Jf+jRpApydKWJ0yOdyTZIVqncvWpFs1RlmAVKPE96M8IL9oUZaV8rgJ
 c9XUCvDFF0OuZQyMoacSzbVfcAy9SE/f7fNXLUpI9rEriYfY5waCXcQrYGwjRtmD
 j2iY0pyaU72i7mtTbcsInPZ/bZ7gO+D1MmFl9WzduLWDJoGHJVcUyC1+YrJjoGF3
 ggplns12qTtdgfiqTKV2I5qf2nHHbk8kmhII1fkYPZwdG2enKhV+r5Oth3zKPVXF
 oOD8YnjACuad05YdkpzQL2DSaiGtPVAXHP4xMN9ktNPSJHwx19HNDiTKex6oxcZf
 Dki+FinbRiFYUP/O91Xe
 =PLTM
 -----END PGP SIGNATURE-----

Merge tag 'fixes-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull last minute fixes from Olof Johansson:
 "One samsung build fix due to a mis-applied patch, and a small set of
  OMAP fixes.  This should be the last from arm-soc for 3.3, hopefully."

* tag 'fixes-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: S3C2440: Fixed build error for s3c244x
  ARM: OMAP2+: Fix module build errors with CONFIG_OMAP4_ERRATA_I688
  ARM: OMAP: id: Add missing break statement in omap3xxx_check_revision
  ARM: OMAP2+: Remove apply_uV constraints for fixed regulator
  ARM: OMAP: irqs: Fix NR_IRQS value to handle PRCM interrupts
2012-03-08 17:32:42 -08:00
Linus Torvalds
9a0cee7114 Another small, clear fix in a specific driver.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPV7ccAAoJEBus8iNuMP3dnNAP/RCk/veO6dXiimamtD6CsaDi
 V8tkSE6S4kJ1Iq6xiIAlx15zelsVNLXz3tOW/z4tAhd7TQRvriVeRWB7HjFOrOuX
 HVYdxs4rZ60PUb2CzOhnk0NONsdvYo1OihMqJ3nxVD0GYz3s4V44Nzh56aUfHFXA
 ybAxPDvMosObyx25XsXvXJmwHq2Bmsy1aZp1k6wEPKPqaoJDgfr05pYJEy+5YkuH
 yUQkP4J2zxeuehQemp12uxrekUyQ9Xj9YoAzENx8WTRvsbp6rTJzcid4bjN9wJXB
 pyebTlWjc9lqvzaw6sBDoOGnoC2F2Nzrq+SvzQB77WRRz9fiDfGfp7w9dg2D1ZmW
 IosNJjXbFFj7VVfpjsDmKQWPQMWfM7PV5lgttTC850yW44wHKf/PsRqZc43KeLrv
 Za+xFaL1qS1dBc5tP+23+i5njFxGraC5NOR5YIYOnvfUJDiFMaJ7qc9kX6qXdBxr
 R1aEg8jkxK3B+9z/EX26eHzeKOXmPqno5t9TrZFjNjgX1JYt4cc9Sbz7ZipVH3V/
 QEUsKAgvLQ7bW1eXlRxYNWPPKIMaQmMlAr3xBANF+rCflBY18KDeJKK81Hv+DRAK
 rfkfstNVAKM2jRzgEUsYjPmSnO2KJJ3PZjEemWAw6nSvZaNdz9NcmimmGXB9DuKi
 vIXvW5NUL1d547vLE0ct
 =X10j
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "Another small, clear fix in a specific driver."

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: tps65910: Configure correct value for VDDCTRL vout reg
2012-03-08 17:25:17 -08:00
Linus Torvalds
ee0849c911 Minor bug fixes and documentation updates for v3.3-rc5
Fixes up a duplicate #include, adds an empty implementation of
 of_find_compatible_node() and make git ignore .dtb files.  And fix
 up bus name on OF described PHYs.  Nothing exciting here.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPWPvsAAoJEEFnBt12D9kB8QsP/2e6jv7CQ/wUhihzw126Y8yi
 4HLG3ByJ382/c3LXg3juC+WfMvlpqEa0yqhikFKgIsm7cNbv7PkPS583pujdSXo0
 IRykiT3Q9+XbO7L+9C88miYIQT8+IT/AjIjfuRwlP4gLPNUJhknpYhYOc09YzwOp
 zhheeGVyeyTay+beQXip8gOEq2dYEl4IKsItagCBZfkDvj3Y8yDwTlP7f2j0FYZi
 uODa3NFKE4uc0U2chtro0Vt87TRfbnIQ93SbvEWyQBWMEbPqT3l1Q94AeFGubCLj
 RX910WvurCE4evzo2ZJzXPt9gPEyGIgtMGbjh+cENfT5/wNB2HWk1ftKnss5yEjp
 WmcbwWKwXPwRPc5EpRdgabBCRgouCZghtcnJpkoXKSwbEt/nj3no8GOZXQnv+rSL
 Ga0BSk1jJYC9DRpaIrLvdxXZF7vy1nug8fgU9ALi2R0gTmN+k6tHlLh60EWMSCBF
 YCXv3fUd9IVJfOYsu4qMk0Pu40pW9rDc698Nxiep7C0iNhlddq8fiHTwB3DdoinC
 iYmz+wEdDDp/68qY/mguXXtr5GAFSz1PUOwSJkh2zW6LnBDEv1djfhoA+5gwZX2v
 I1IwfNHMn/XAEuhOFWMo9CejB0rDoBhigwucH8EilbIdBYVCCEtYaubO/Gq6HmId
 h7hx9sWjrwF9HY0N9EHX
 =/fxH
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6

Pull minor devicetree bug fixes and documentation updates from Grant Likely:
 "Fixes up a duplicate #include, adds an empty implementation of
  of_find_compatible_node() and make git ignore .dtb files.  And fix up
  bus name on OF described PHYs.  Nothing exciting here."

* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  doc: dt: Fix broken reference in gpio-leds documentation
  of/mdio: fix fixed link bus name
  of/fdt.c: asm/setup.h included twice
  of: add picochip vendor prefix
  dt: add empty of_find_compatible_node function
  ARM: devicetree: Add .dtb files to arch/arm/boot/.gitignore
2012-03-08 17:24:27 -08:00
Linus Torvalds
7d77696e92 SPI section mismatch bug fix for v3.3-rc3
Russell King (1):
       Fix section mismatch in spi-pl022.c
 
 Minor fix for pl022_dma_probe() function which was put in the wrong section.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPWPqWAAoJEEFnBt12D9kBI/QQAJ+4yq7ZB9GAh4iEvfpbZuvZ
 28pO17EBdNo/gcWk7JLRLpgd5pCmcxFUgwcVmALm8n0yW/sgg6xpKBh3Mi3NKkGl
 EcFCEBJr6G1eS/xZwxjtgPyZMrNyMh0EuyxSn6yBZrCZ/qrQp/yRO78Cxlx4ppV5
 rve4PeQ2DMtdfpwMfNxs5vDulzK404Bq5EwPyV4jMr33eCkvEfsBSSDCJoo57jLv
 YBguqzT5VmGvyZ47Gk5ufkSwx29oFv0wtQcvnTtAISH7wgIwc83dvRHhgguaFNjt
 BKVk/Pt75TTKJ/sfMbnXFQwqCeGbwa+2ft+6Q1rSv+Uj2tzwkrf+iEG51UGTMfJF
 eESU9VcFNlzxanQNsOUOiyDe72mYeD7KGh6Z12vliGLshgnBiZOn0sUYQiTj2KB/
 0MDTcPZHAikg4GVdQfsPhXAYt6bYEHL2loqtY9GJB8MSdUZHxP5+/QWl9P4zpXp0
 yfuzwtCjuqS+dq7DE0VCCOISzcxRFJHmoOEXFP1qMnn3DQGairk1yVbkHJlJOCRq
 GlfeK1V94EpG2J7oYIP77EufrkY2ASDSLD2jk90SCkeBh7EyOchHHSKm8ehS+P6C
 2UsTJ1PdevP1lsR/cmQDhEmENrwHMSD8Uc06DzO8OYrRFiL8cU0uF1pvFTEzsR64
 ou8ljS0OkspLQKf24SIi
 =nTfV
 -----END PGP SIGNATURE-----

Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6

Pull SPI section mismatch bug fix for v3.3-rc3 from Grant Likely:
 "Minor fix for pl022_dma_probe() function which was put in the wrong
  section."

* tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  Fix section mismatch in spi-pl022.c
2012-03-08 17:23:45 -08:00
Linus Torvalds
42a6c7ef3b Four patches since v3.3-rc6:
1bd612a hwmon: (jc42) Add support for AT30TS00, TS3000GB2, TSE2002GB2, and MCP9804
 7ad6307 hwmon: (zl6100) Maintain delay parameter in driver instance data
 7cb3c44 hwmon: (pmbus_core) Fix maximum number of POUT alarm attributes
 4de8612 hwmon: (jc42) Add support for ST Microelectronics STTS2002 and STTS3000
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJPV7njAAoJEMsfJm/On5mBJQAQAJeqsVDIdsYAok5DUcF3NLYV
 CRhrNWSrGvrz0w9+dovn3R0kIP/mP5XeAsVswokDbVlXL6JYa1jJuhQo7WvrA1sI
 OEOGe9E9ypH7Bol+BtH293TJRkGbTRfmi2c8vjnkNYAXNoYvXKd91ZUhN+lhoLxW
 BqGgHF3wgZZlw3jrCJC78Glmnu4fmy18g2oUqJbPgdtBRh2coDw0i1cvAPM8ud/b
 Aqpb+DF2Im2qMFgiflaWkB0fU/VJSxQMDYtgguOVeGTIuxCGVihwM2zGjJtieHRD
 w4stWfUWqhotBlsDlfrTnhgZZ4dFYvxo98as5HhWnzMdwwOoiwx2Nhv4M1ZpCi1d
 KIJrGKpsgVTGL2b6PNJhAusCO8slRBJ44sb49hTk1baFd9YuerqHReUw5/Y0+Jk/
 8juOKOVoX27DW3rZkq7KX6AEdDB9l3dnd3D8sSLyPmMeRVVuxUsQjK7PCbDtjQ6u
 BASNRGAp4T7+pGhq2yQmDAoawDPYesa5hg/6XD2x5iHCdI/TMxAHgP0qVkfiOcYX
 IxYS/rgeBoH42+Aak5XXwafbTfdiWaRxpMnRnwgaTUxaOWu3GauIQb5TzWZMQTKm
 xwZkxoS/XVDADXCzZxoCop4nbYnFwqKq2p+icwleSuVyN/+hI2lsz8wdsYFFWKnZ
 ApulwsYjhhtrtDFRysiB
 =mjD6
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull four hwmon patches from Guenter Roeck

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (jc42) Add support for AT30TS00, TS3000GB2, TSE2002GB2, and MCP9804
  hwmon: (zl6100) Maintain delay parameter in driver instance data
  hwmon: (pmbus_core) Fix maximum number of POUT alarm attributes
  hwmon: (jc42) Add support for ST Microelectronics STTS2002 and STTS3000
2012-03-08 17:22:54 -08:00
Linus Torvalds
5d0edf2915 Device-mapper fixes for 3.3.
Eight small device-mapper bug fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPV8+yAAoJEK2W1qbAHj1nZVAQAI8TNKwnBpKSW3Y9XFHqWjEx
 71wbjDkKkdEUWy52CAkSoRnQdX+ABxxGr5R60n/vJvHi4yDse56LddPzKAo4zD3c
 DVh6RB8CTIY+2IXGzjkDtelmKogKyAMlhmRoj0oLb5/29n6lnn6A0vkq4OimuFJO
 IIdgJxpRLqmV8NcSVC7qCEoErxzTNz9w7HaBBs73VhF8AcN/6Qi/z55zDOzT/Iz8
 iMHGmOHJBb8OxMN8BWWFdDh2YUz3isbM1xbBerYxy3P3WCHpxGBt7yRiHm3Yd5il
 USnJN3Kz0w6Orhgu1eeAuJz1A9cdSP62AQDdM91+v3nHz3mtTdAljmJZgzgzqs5u
 SRO24J6FD201DNh/RitDC1UzNOBqeapfqprT/gH+qM4Pl6X+vuXiSe5cxx+lTOhJ
 GErI1XYpTfzymdpQfqj6VnDMevRf0Hz+mSjEiUh8qjUv9bXHkmTrzjxCvAIEM+4h
 fJSQ0Fp77eV7Du9HkkFbEXVTYOe8VO+6E9AaplBAjZxHS6w+5tMFkHTM28JPxS98
 rYAks9QKbaZaEYZiNv7htux8n2OS9IeGHdLQpsooLh6lD4GxvBJ7NC8wUkfUzn27
 zEr2vqAYuA3PiccSHnT7tlN0PN1JlOjDCf+cdQkKfJj5w0E/qS2Fiv2UFIRLRPEa
 blSbf7wU0mpvorQJn/bd
 =lLJB
 -----END PGP SIGNATURE-----

Merge tag 'dm-3.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm

Pull device-mapper fixes for 3.3 from Alasdair Kergon

Eight small device-mapper bug fixes.

* tag 'dm-3.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
  dm raid: fix flush support
  dm raid: set MD_CHANGE_DEVS when rebuilding
  dm thin metadata: decrement counter after removing mapped block
  dm thin metadata: unlock superblock in init_pmd error path
  dm thin metadata: remove incorrect close_device on creation error paths
  dm flakey: fix crash on read when corrupt_bio_byte not set
  dm io: fix discard support
  dm ioctl: do not leak argv if target message only contains whitespace
2012-03-08 17:21:51 -08:00
Greg Kroah-Hartman
5db51b50c1 USB: serial: metro-usb: move to use dev_dbg() instead of dbg()
This properly ties the driver into the dynamic debug system and provides
the needed device identification when the messages are printed out.

It also removes a ton of checkpatch warnings as well, which is always a
nice validation that it's the correct thing to do.

Cc: Aleksey Babahin <tamerlan311@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 14:16:12 -08:00
Greg Kroah-Hartman
8111e4ecf9 USB: serial: metro-usb: remove unneeded cast and function call
We should use kzalloc() instead of kmalloc() and memset(), and remove an
unneeded void * cast as well.

Cc: Aleksey Babahin <tamerlan311@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 14:00:11 -08:00
Greg Kroah-Hartman
dd63b0b4d6 USB: serial: metro-usb: remove function header comments
They aren't needed, make the checkpatch tool unhappy, and in some
places, aren't even correct.  So just remove them, they get in the way
and are messy.

Cc: Aleksey Babahin <tamerlan311@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 13:58:13 -08:00
Greg Kroah-Hartman
9fbd1649d5 USB: serial: metro-usb: remove function prototypes
By rearranging the functions a bit, we can remove all function
prototypes.

Note, this also deleted the _close function, as it wasn't needed, it was
doing the same thing the cleanup function did, so just call that
instead.

Cc: Aleksey Babahin <tamerlan311@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 13:55:41 -08:00
Haiyang Zhang
d31b20fcc8 net/hyperv: Use the built-in macro KBUILD_MODNAME for this driver
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: Olaf Hering <olaf@aepfle.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08 13:55:27 -08:00
Greg Kroah-Hartman
d4cbd6e990 USB: serial: metro-usb: fix up coding style errors
This fixes up all of the coding style errors, and removes the initial,
unneeded comments on how to load the module and the old changelog which
are no longer needed.

There are still a number of coding style warnings left, I'll get to them
later.

Cc: Aleksey Babahin <tamerlan311@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 13:50:54 -08:00
Greg Kroah-Hartman
159d4d8d5e USB: serial: metro-usb: remove the .h file
A driver doesn't need a .h file just for simple things like vendor ids
and a private structure.  So move it into the .c file instead, saving
some overall lines.

Cc: Aleksey Babahin <tamerlan311@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 13:42:41 -08:00
Greg Kroah-Hartman
1935e357bb USB: serial: metro-usb: convert to use module_usb_serial_driver
Now that we aren't doing anything special in the init function, move to
use the easier module_usb_serial_driver() call instead, saving a lot of
lines of unnecessary code.

Cc: Aleksey Babahin <tamerlan311@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 13:39:53 -08:00
Greg Kroah-Hartman
fdac0f647a USB: serial: metro-usb: remove vendor and product module parameters
All new usb serial drivers should be using the dynamic id function, not
having module parameters for this type of thing.  So remove them before
anyone gets used to them being there.

Cc: Aleksey Babahin <tamerlan311@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 13:37:32 -08:00
Greg Kroah-Hartman
62f2a83de0 USB: serial: metro-usb: add to the build
This adds the metro-usb driver to the build system properly.

Cc: Aleksey Babahin <tamerlan311@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 13:34:01 -08:00
Greg Kroah-Hartman
11a4f40064 USB: serial: metro-usb: fix up usb_serial_register calls
The usb serial core has changed how the driver is to be registered and
unregistered recently.  Make these changes to the driver so that it will
properly build and work.

Cc: Aleksey Babahin <tamerlan311@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 13:33:04 -08:00
Aleksey Babahin
43d186fe99 USB: serial: add metro-usb driver to the tree
This driver is for the Metrologic barcode scanner.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 13:24:09 -08:00
Orjan Friberg
33d2832ab0 USB: gadget: Make g_hid device class conform to spec.
HID devices should specify this in their interface descriptors, not in the
device descriptor. This fixes a "missing hardware id" bug under Windows 7 with
a VIA VL800 (3.0) controller.

Signed-off-by: Orjan Friberg <of@flatfrog.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 13:11:34 -08:00
Bjørn Mork
3cc3615749 usb: cdc-wdm: adding usb_cdc_wdm_register subdriver support
This driver can be used as a subdriver of another USB driver, allowing
it to export a Device Managment interface consisting of a single interrupt
endpoint with no dedicated USB interface.

Some devices provide a Device Management function combined with a wwan
function in a single USB interface having three endpoints (bulk in/out
+ interrupt).  If the interrupt endpoint is used exclusively for DM
notifications, then this driver can support that as a subdriver
provided that the wwan driver calls the appropriate entry points on
probe, suspend, resume, pre_reset, post_reset and disconnect.

The main driver must have full control over all interface related
settings, including the needs_remote_wakeup flag. A manage_power
function must be provided by the main driver.

A manage_power stub doing direct flag manipulation is used in normal
driver mode.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 13:06:48 -08:00
Bjørn Mork
b0c1386080 usb: cdc-wdm: adding list lookup indirection
Register all interfaces handled by this driver in a list, getting
rid of the dependency on usb_set_intfdata.  This allows further
generalization and simplification of the probe/create functions.

This is needed to decouple wdm_open from the driver owning the
interface, and it also allows us to share all the code in
wdm_create with drivers unable to do usb_set_intfdata.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 13:06:48 -08:00