Commit graph

286600 commits

Author SHA1 Message Date
Tomoya MORINAGA
637b78eb31 usb: gadget: pch_udc: Detecting VBUS through GPIO with interrupt
Problem:
 pch_udc continues operation even if VBUS becomes Low.
 pch_udc performs D+ pulling up before VBUS becomes High.
 USB device should be controlled according to VBUS state.

Root cause:
 The current pch_udc is not always monitoring VBUS.

Solution:
 The change of VBUS is detected using an interrupt of GPIO.
 If VBUS became Low, pch_udc handles 'disconnect'.
 After VBUS became High, a pull improves D+, and pch_udc
 handles 'connect'.

[ balbi@ti.com : make it actually compile ]

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-09 09:58:48 +02:00
Tomoya MORINAGA
dd63180b75 usb: gadget: pch_udc: Detecting VBUS through GPIO
Problem:
 In USB Suspend, pch_udc handles 'disconnect'.

Root cause:
 The current pch_udc is not monitoring VBUS.
 When USB cable is disconnected, USB Device Controller generates
 an interrupt of USB Suspend.
 pch_udc cannot distinguish it is USB Suspend or disconnect.
 Therefore, pch_udc handles 'disconnect' after an interrupt of
 USB Suspend happend.

Solution:
 VBUS is detected through GPIO.
 After an interrupt produced USB Suspend, if VBUS is Low,
 pch_udc handles 'disconnect'.
 If VBUS is High, pch_udc handles 'suspend'.

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-09 09:56:53 +02:00
Sebastian Andrzej Siewior
20edfbb6a1 usb: gadget: dummy_hcd: fix null-deref free req
_ep to ep is a pointer substraction so ep won't be zero unless _ep was
8. This was not intendent by the author, it was probably a typo while
checking for NULL of the argument.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-09 09:54:00 +02:00
Sebastian Andrzej Siewior
3cf0ad02e4 usb: gadget: dummy_hcd: don't assign ->desc on error case
If the stream check fails then we leave ep->desc assigend but we return
with an error code. The caller assumes the endpoint is not enabled
(which is the case) but it can not enable it again due to this
assigment.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-09 09:53:53 +02:00
Praveena Nadahally
d11519adc2 usb: gadget: Add Interface Association Descriptor to ECM
Add IAD to bind the two interfaces of ECM so that it works properly
in composite gadget mode.

Signed-off-by: Thirupathi <thirupathi.chippakurthy@stericsson.com>
Signed-off-by: Praveena Nadahally <praveen.nadahally@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-30 11:17:26 +02:00
Sebastian Andrzej Siewior
fcc0bb5ace usb: gadget: f_mass_storage: remove one FSG_NO_INTR_EP
Remove one define of FSG_NO_INTR_EP and we still have that we can use.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24 11:45:19 +02:00
Michal Nazarewicz
54b8360ffd usb: gadget: update Michal Nazarewicz's email address
The m.nazarewicz@samsung.com email address is no longer valid,
so this commit replaces it with mina86@mina86.com which is
employer-agnostic and thus should be valid for foreseeable
feature.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24 11:45:11 +02:00
Sebastian Andrzej Siewior
18f2cbaa2b usb: gadget: dummy_hcd: clean up checkpatch
This patch converts checkpatch output of
|./scripts/checkpatch.pl drivers/usb/gadget/dummy_hcd.c -file

from
|total: 22 errors, 174 warnings, 2642 lines checked

to
|total: 0 errors, 0 warnings, 2632 lines checked

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24 11:42:42 +02:00
Sebastian Andrzej Siewior
59f08e6d20 usb: dummy_hcd: use usb_endpoint_type()
This patch makes use of usb_endpoint_type() instead of the open coding.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24 11:40:46 +02:00
Sebastian Andrzej Siewior
a54c979fed usb: gadget: dummy_hcd: complete stream support
dummy_hcd provides (alloc|free)_stream() callbacks but there are not
doing anything. The transfer side also lacks matching of streams. This
patch changes this and implements stream allocation / de-allocation
support and proper urb <=> req matching.
The UDC side exposes a limit of 16 streams. DWC3, the only USB3 UDC has
no limitations in this regard except that it _needs_ to know that
streams will be used at the ep_enable time. At the host side, there is
no real limit either: XHCI can allocate any number of streams as long as
it does not run out of memory. The UAS gadget currently requests 16
streams and the UAS host side fallbacks from the requested 256 down to
16 which is fine.
From the UASP point of view (the only specified user), the number of
used streams does not really matter. The only limitation is that the
host may not use a higher stream than the gadget requested and can deal
with.

The dummy stream support has been modelled after current UAS + XHCI +
DWC3 + UASP usage which helps me testing:
- the device announces that each ep supports 16 streams (even it could
  more than that).
- the device side looks into Companion descriptor at ep_enable time and
  enables them according to it.
- the host side tries to enable the requested number of streams but the
  upper limit is the Comanion descriptor. None (zero streams) is an
  error condition, less is okay.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24 11:39:49 +02:00
Tomoya MORINAGA
9645f7d3da usb: gadget: pch_udc: Add debug message
ISSUE:
Adding debugging messages.

CAUSE:
The debugging messages are added to make sure of that major interrupt events
are occurring.

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24 11:35:38 +02:00
Tomoya MORINAGA
833310402c usb: gadget: pch_udc: Reduce redundant interrupt
ISSUE:
USB Suspend interrupts occur frequently.

CAUSE:
When it is called pch_udc_reconnect() in USB Suspend, it repeats reset and
Suspend.

SOLUTION:
pch_udc_reconnect() does not enable all interrupts.  When an enumeration event
occurred the driver enables all interrupts.

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24 11:35:25 +02:00
Tomoya MORINAGA
1c575d2d2e usb: gadget: pch_udc: Fix usb/gadget/pch_udc: Fix ether gadget connect/disconnect issue
ISSUE:
After a USB cable is connect/disconnected, the system rarely freezes.

CAUSE:
Since the USB device controller cannot know to disconnect the USB cable, when
it is used without detecting VBUS by GPIO, the UDC driver does not notify to
USB Gadget.

Since USB Gadget cannot know to disconnect, a false setting occurred when the
USB cable is connected/disconnect repeatedly.

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24 11:35:13 +02:00
Tomoya MORINAGA
84566abba0 usb: gadget: pch_udc: Fix USB suspend issue
ISSUE:
After USB Suspend, a system rarely freezes.

CAUSE:
When USB Suspend occurred, the driver is not notifying
a gadget of the event.

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24 11:34:44 +02:00
Tomoya MORINAGA
c802672cd3 usb: gadget: pch_udc: Fix wrong return value
ISSUE:
If the return value of pch_udc_pcd_init() is False, the return value of
this function is unsettled.
Since pch_udc_pcd_init() always returns 0, there is not actually the issue.

CAUSE:
If pch_udc_pcd_init() is True, the variable, retval, is not set for an
appropriate value.

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24 11:34:24 +02:00
Tomoya MORINAGA
c50a3bff0e usb: gadget: pch_udc: Fix disconnect issue
ISSUE:
When the driver notifies a gadget of a disconnect event, a system
rarely freezes.

CAUSE:
When the driver calls dev->driver->disconnect(), it is not calling
spin_unlock().

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24 11:34:02 +02:00
Heiko Stübner
294f78ec49 usb: s3c-hsudc: add basic runtime_pm calls
This will enable the system to check for activity of the usb gadget
and also in a later patch to control the usbphy power-domain.
When handling the power domain there, it will be possible to remove
another reference to architecture code.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24 11:33:21 +02:00
Heiko Stübner
2d4172c938 usb: s3c-hsudc: Use helper functions instead of generic container_of
The helper functions were definied but never used until now.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24 11:33:13 +02:00
Shimoda, Yoshihiro
5ea4399457 usb: renesas_usbhs: add support for SUDMAC
The SUDMAC uses 8-bit width only. So, when the driver uses SUDMAC,
we have to clear the MBW_32.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24 11:33:04 +02:00
Shimoda, Yoshihiro
53069af3fa usb: renesas_usbhs: add IRQ resource decoding for IRQF_SHARED
In case of the SH7757, the irq number of USB module and SUDMAC
are the same. So, we have to set the IRQF_SHARED in such a case.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24 11:32:56 +02:00
Dan Carpenter
10800f2ca1 usb: gadget: mv_udc: remove unneeded NULL check
We've dereferenced req already, and we checked for bogus parameters at
the start of the function.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24 11:31:56 +02:00
Sebastian Andrzej Siewior
d81f3e4f57 usb: gadget: dummy_hcd: make alloc/free streams static
There is no reason why dummy_alloc_streams() and dummy_free_streams()
are global. Make them static instead.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24 11:25:32 +02:00
Sebastian Andrzej Siewior
d262127c33 usb: gadget: dummy_hcd: rename dummy_udc_udpate_ep0() to dummy_udc_update_ep0()
This renames a function so "update" is spelled properly.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24 11:25:31 +02:00
Sebastian Andrzej Siewior
14fce33a96 usb: gadget: dummy_hcd: add sg support
This patch adds sg support to dummy_hcd. It seems that uas is not able
to work with a hcd which does not support sg only based transfers.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24 11:23:31 +02:00
Sebastian Andrzej Siewior
a04ce20d9f usb: gadget: dummy_hcd: move the transfer part into its own function
This patch moves the part of the code which does the bare transfer into
its function. It is a preparion for the implementation of sg support.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24 11:20:36 +02:00
Sebastian Andrzej Siewior
c688419141 usb: gadget: dummy_hcd: initialize max_streams early
While playing with uasp I noticed that it does not work with dummy_hcd.
The problem is that uasp requires a stream capable endpoint which it is
requesting at bind time like every other gadget. dummy_hcd however
initializes the max_stream value after connect once it knows if it runs
at SS or not.
I don't think that it is might be wrong to initialize the stream
capability even at HS speed. The gadget may not use this descriptor at
HS speed so it should not cause any damage.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24 11:19:56 +02:00
Linus Torvalds
dcd6c92267 Linux 3.3-rc1 2012-01-19 15:04:48 -08:00
Linus Torvalds
567e47935a Merge branches 'sched-urgent-for-linus', 'perf-urgent-for-linus' and 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/accounting, proc: Fix /proc/stat interrupts sum

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tracepoints/module: Fix disabling tracepoints with taint CRAP or OOT
  x86/kprobes: Add arch/x86/tools/insn_sanity to .gitignore
  x86/kprobes: Fix typo transferred from Intel manual

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits
  x86, tsc: Fix SMI induced variation in quick_pit_calibrate()
  x86, opcode: ANDN and Group 17 in x86-opcode-map.txt
  x86/kconfig: Move the ZONE_DMA entry under a menu
  x86/UV2: Add accounting for BAU strong nacks
  x86/UV2: Ack BAU interrupt earlier
  x86/UV2: Remove stale no-resources test for UV2 BAU
  x86/UV2: Work around BAU bug
  x86/UV2: Fix BAU destination timeout initialization
  x86/UV2: Fix new UV2 hardware by using native UV2 broadcast mode
  x86: Get rid of dubious one-bit signed bitfield
2012-01-19 14:53:06 -08:00
Linus Torvalds
99d1edc5c5 gpio bug fixes for v3.3
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPGI6hAAoJEEFnBt12D9kB7/4QAJp0uF1tVcLsmNq3B1OfH8BV
 +1a0H0yxg1vrTzKFx/Bh5YUNtzRjzf8Y6U5w+HMc2UOuZQD2Y/VuNsk66P2qr2bW
 rMgnNDUUgcWfSyAlvt72xpil/zqHRx0OMLF2d4LrvycW7k1BVh4/fsQYCQRCw0Yw
 2g3YwVdHm5E1N2X0lyXonc3nbutDQmspCRbwpZFOru0OGTeQlzweOiYx2bTkkFcI
 PhEWIjfw5MwLtXwhBw7mIpM4Fed43oAm2SgxOiI8QKINzJ/Cj/0gn6HwiDuFaWsr
 20o3ths8OLu80AmSeIO7VQDpqeePL4gmf40A4+4JCK7yeP3YoxzWrA1pCe+7/NO8
 FS4kcqo8l29966oXw2lYFca3Yt3q78SSXus6+xaHXzYPQrH7dpJKq5YDdEYZnAVM
 f6tW6fkba3GS5/ZkmMVY0/RwUImxJf9LDQq+hJea4i35nBhbGclgbOQrhqQTQJeR
 hhKMl5FvPwLTxtp8DQAE2yuVBi3Q0/lxDmvJZ1PDt34B3/5j98G+rcI9CuDQEVSg
 MPmXiJByetnVs3+itcdy5cN3iUEWJ2wr+fSR3kM2hfGk/Ip5/PRCzp7LWTG2ZVfm
 Ltn7p9DQb6vzKwAfKR4r0g2fO/QWpfnh0xebOtrlMWEjYMX2roXWN8Juy1SRDQEB
 X0Plo+Yg9/mXm5fNwOd+
 =JWAa
 -----END PGP SIGNATURE-----

Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6

gpio bug fixes for v3.3

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  gpio: tps65910: Use correct offset for gpio initialization
  gpio/it8761e: Restrict it8761e gpio driver to x86.
  gpio-ml-ioh: cleanup __iomem annotation usage
  gpio-ml-ioh: cleanup NULL pointer checking
  gpio-pch: cleanup __iomem annotation usage
  gpio-pch: cleanup NULL pointer checking
2012-01-19 14:52:03 -08:00
Linus Torvalds
e19c29e8d8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  qnx4: don't leak ->BitMap on late failure exits
  qnx4: reduce the insane nesting in qnx4_checkroot()
  qnx4: di_fname is an array, for crying out loud...
  vfs: remove printk from set_nlink()
  wake up s_wait_unfrozen when ->freeze_fs fails
2012-01-19 14:49:16 -08:00
H. Peter Anvin
4f2f81a562 x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits
In checkin

  303395ac3b x86: Generate system call tables and unistd_*.h from tables

the feature macros in <asm/unistd.h> were unified between 32 and 64
bits.  Unfortunately 32 bits requires __ARCH_WANT_SYS_IPC and this was
inadvertently dropped.

Reported-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/CALLzPKbeXN5gdngo8uYYU8mAow=XhrwBFBhKfG811f37BubQOg@mail.gmail.com
2012-01-19 12:57:09 -08:00
H. Peter Anvin
282f445a77 Merge remote-tracking branch 'linus/master' into x86/urgent 2012-01-19 12:56:50 -08:00
Linus Torvalds
afd290945c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  KEYS: Permit key_serial() to be called with a const key pointer
  keys: fix user_defined key sparse messages
  ima: fix cred sparse warning
  MPILIB: Add a missing ENOMEM check
2012-01-19 11:46:08 -08:00
Al Viro
8bc5191b26 qnx4: don't leak ->BitMap on late failure exits
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-19 13:54:36 -05:00
Al Viro
4134bf81ff qnx4: reduce the insane nesting in qnx4_checkroot()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-19 13:40:57 -05:00
Al Viro
1aab323ea5 qnx4: di_fname is an array, for crying out loud...
(struct qnx4_inode_entry *)(bh->b_data + some_offset)->di_fname
is not going to be NULL, TYVM...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-19 13:19:42 -05:00
David Howells
456a8167e9 KEYS: Permit key_serial() to be called with a const key pointer
Permit key_serial() to be called with a const key pointer.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2012-01-19 16:17:35 +11:00
Mimi Zohar
f6b24579d0 keys: fix user_defined key sparse messages
Replace the rcu_assign_pointer() calls with rcu_assign_keypointer().

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2012-01-19 16:16:29 +11:00
Mimi Zohar
3db59dd933 ima: fix cred sparse warning
Fix ima_policy.c sparse "warning: dereference of noderef expression"
message, by accessing cred->uid using current_cred().

Changelog v1:
- Change __cred to just cred (based on David Howell's comment)

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2012-01-19 15:59:11 +11:00
Linus Torvalds
90a4c0f51e uml: fix compile for x86-64
Randy Dunlap reports that we get

  arch/x86/um/shared/sysdep/ptrace.h:7:20: error: redefinition of 'regs_return_value'
  arch/x86/um/shared/sysdep/ptrace.h:7:20: note: previous definition of 'regs_return_value' was here

when compiling UML for x86-64.

Stephen Rothwell root-caused it and says:

 "Caused by commit d7e7528bcd ("Audit: push audit success and retcode
  into arch ptrace.h") (another patch that was never in linux-next :-().

  This file now needs protection against double inclusion."

so let's do as the man says.

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Analyzed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-18 19:26:11 -08:00
David Howells
4bf1924c00 MPILIB: Add a missing ENOMEM check
Add a missing ENOMEM check.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2012-01-19 13:45:51 +11:00
Linus Torvalds
f59e842fc0 Merge branch 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
* 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  ib_srpt: Initial SRP Target merge for v3.3-rc1
2012-01-18 16:29:42 -08:00
Linus Torvalds
4ba3069fea Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (26 commits)
  target: Set additional sense length field in sense data
  target: Remove legacy device status check from transport_execute_tasks
  target: Remove __transport_execute_tasks() for each processing context
  target: Remove extra se_device->execute_task_lock access in fast path
  target: Drop se_device TCQ queue_depth usage from I/O path
  target: Fix possible NULL pointer with __transport_execute_tasks
  target: Remove TFO->check_release_cmd() fabric API caller
  tcm_fc: Convert ft_send_work to use target_submit_cmd
  target: Add target_submit_cmd() for process context fabric submission
  target: Make target_put_sess_cmd use target_release_cmd_kref
  target: Set response format in INQUIRY response
  target: tcm_mod_builder: small fixups
  Documentation/target: Fix tcm_mod_builder.py build breakage
  target: remove overagressive ____cacheline_aligned annoations
  tcm_loop: bump max_sectors
  target/configs: remove trailing newline from udev_path and alias
  iscsi-target: fix chap identifier simple_strtoul usage
  target: remove useless casts
  target: simplify target_check_cdb_and_preempt
  target: Move core_scsi3_check_cdb_abort_and_preempt
  ...
2012-01-18 15:59:18 -08:00
Linus Torvalds
507a03c1cb Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
This includes initial support for the recently published ACPI 5.0 spec.
In particular, support for the "hardware-reduced" bit that eliminates
the dependency on legacy hardware.

APEI has patches resulting from testing on real hardware.

Plus other random fixes.

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (52 commits)
  acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec
  intel_idle: Split up and provide per CPU initialization func
  ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2
  ACPI processor: Remove unneeded cpuidle_unregister_driver call
  intel idle: Make idle driver more robust
  intel_idle: Fix a cast to pointer from integer of different size warning in intel_idle
  ACPI: kernel-parameters.txt : Add intel_idle.max_cstate
  intel_idle: remove redundant local_irq_disable() call
  ACPI processor: Fix error path, also remove sysdev link
  ACPI: processor: fix acpi_get_cpuid for UP processor
  intel_idle: fix API misuse
  ACPI APEI: Convert atomicio routines
  ACPI: Export interfaces for ioremapping/iounmapping ACPI registers
  ACPI: Fix possible alignment issues with GAS 'address' references
  ACPI, ia64: Use SRAT table rev to use 8bit or 16/32bit PXM fields (ia64)
  ACPI, x86: Use SRAT table rev to use 8bit or 32bit PXM fields (x86/x86-64)
  ACPI: Store SRAT table revision
  ACPI, APEI, Resolve false conflict between ACPI NVS and APEI
  ACPI, Record ACPI NVS regions
  ACPI, APEI, EINJ, Refine the fix of resource conflict
  ...
2012-01-18 15:51:48 -08:00
Stefan Berger
be405411f7 tpm: fix (ACPI S3) suspend regression
This patch fixes an (ACPI S3) suspend regression introduced in commit
68d6e6713f ("tpm: Introduce function to poll for result of self test")
and occurring with an Infineon TPM and tpm_tis and tpm_infineon drivers
active.

The suspend problem occurred if the TPM was disabled and/or deactivated
and therefore the TPM_PCRRead checking the result of the (asynchronous)
self test returned an error code which then caused the tpm_tis driver to
become inactive and this then seemed to have negatively influenced the
suspend support by the tpm_infineon driver...  Besides that the tpm_tis
drive may stay active even if the TPM is disabled and/or deactivated.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Tested-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-18 15:50:17 -08:00
Linus Torvalds
93c3d65b28 nvme: fix merge error due to change of 'make_request_fn' fn type
The type of 'make_request_fn' changed in 5a7bbad27a ("block: remove
support for bio remapping from ->make_request"), but the merge of the
nvme driver didn't take that into account, and as a result the driver
would compile with a warning:

  drivers/block/nvme.c: In function 'nvme_alloc_ns':
  drivers/block/nvme.c:1336:2: warning: passing argument 2 of 'blk_queue_make_request' from incompatible pointer type [enabled by default]
  include/linux/blkdev.h:830:13: note: expected 'void (*)(struct request_queue *, struct bio *)' but argument is of type 'int (*)(struct request_queue *, struct bio *)'

It's benign, but the warning is annoying.

Reported-by: Stephen Rothwell <sfr@canb.auug.org>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-18 15:41:27 -08:00
Stephen Rothwell
9ef9b20bd0 xen: using EXPORT_SYMBOL requires including export.h
Fix these warnings:

  drivers/xen/biomerge.c:14:1: warning: data definition has no type or storage class [enabled by default]
  drivers/xen/biomerge.c:14:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int]
  drivers/xen/biomerge.c:14:1: warning: parameter names (without types) in function declaration [enabled by default]

And this build error:

  ERROR: "xen_biovec_phys_mergeable" [drivers/block/nvme.ko] undefined!

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-18 15:37:49 -08:00
Linus Torvalds
aa303f2c06 Merge branch 'for-linus/i2c-33' of git://git.fluff.org/bjdooks/linux
* 'for-linus/i2c-33' of git://git.fluff.org/bjdooks/linux:
  i2c-eg20t: Change-company-name-OKI-SEMICONDUCTOR to LAPIS Semiconductor
  i2c-eg20t: Support new device LAPIS Semiconductor ML7831 IOH
  i2c-eg20t: modified the setting of transfer rate.
  i2c-eg20t: use i2c_add_numbered_adapter to get a fixed bus number
  i2c: OMAP: Add DT support for i2c controller
  I2C: OMAP: NACK without STP
  I2C: OMAP: correct SYSC register offset for OMAP4
2012-01-18 13:46:13 -08:00
Linus Torvalds
4a7c1ff236 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (57 commits)
  [media] as3645a: Fix compilation by including slab.h
  [media] s5p-fimc: Remove linux/version.h include from fimc-mdevice.c
  [media] s5p-mfc: Remove linux/version.h include from s5p_mfc.c
  [media] ds3000: using logical && instead of bitwise &
  [media] v4l2-ctrls: make control names consistent
  [media] DVB: dib0700, add support for Nova-TD LEDs
  [media] DVB: dib0700, add corrected Nova-TD frontend_attach
  [media] DVB: dib0700, separate stk7070pd initialization
  [media] DVB: dib0700, move Nova-TD Stick to a separate set
  [media] : add MODULE_FIRMWARE to dib0700
  [media] DVB-CORE: remove superfluous DTV_CMDs
  [media] s5p-jpeg: adapt to recent videobuf2 changes
  [media] s5p-g2d: fixed a bug in controls setting function
  [media] s5p-mfc: Fix volatile controls setup
  [media] drivers/media/video/s5p-mfc/s5p_mfc.c: adjust double test
  [media] drivers/media/video/s5p-fimc/fimc-capture.c: adjust double test
  [media] s5p-fimc: Fix incorrect control ID assignment
  [media] dvb_frontend: Don't call get_frontend() if idle
  [media] DocBook/dvbproperty.xml: Remove DTV_MODULATION from ISDB-T
  [media] DocBook/dvbproperty.xml: Fix ISDB-T delivery system parameters
  ...
2012-01-18 12:53:54 -08:00
Linus Torvalds
9278e634b4 Merge branch 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: Wait for WM8993 FLL to stabilise
  ASoC: core - Free platform DAPM context at platform removal.
  ASoC: dapm - Fix check for codec context in dapm_power_widgets().
  ASoC: sgtl5000: update author email address
  ASoC: Fix DMA channel leak in imx-pcm-dma-mx2 driver.
2012-01-18 12:53:36 -08:00