Commit graph

412455 commits

Author SHA1 Message Date
Felix Fietkau
70dabeb74e mac80211: let the driver reserve extra tailroom in beacons
Can be used to add extra IEs (such as P2P NoA) without having to
reallocate the buffer.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16 12:14:07 +01:00
Johannes Berg
7907c7d33c mac80211: free all AP/VLAN keys at once
When the AP interface is stopped, free all AP and VLAN keys at
once to only require synchronize_net() once. Since that does
synchronize_net(), also move two such calls into the function
(using the new force_synchronize parameter) to avoid doing it
twice.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16 11:29:48 +01:00
Johannes Berg
e716251d77 mac80211: optimise mixed AP/VLAN station removal
Teach sta_info_flush() to optionally also remove stations
from all VLANs associated with an AP interface to optimise
the station removal (in particular, synchronize_net().)

To not have to add the vlans argument throughout, do some
refactoring.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16 11:29:47 +01:00
Johannes Berg
d778207b06 mac80211: optimise synchronize_net() for sta_info_flush
There's no reason to have one synchronize_net() for each
removed station, refactor the code slightly to have just
a single synchronize_net() for all stations.

Note that this is currently useless as hostapd removes
stations one by one and this coalescing never happens.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16 11:29:47 +01:00
Johannes Berg
c878207844 mac80211: move synchronize_net() before sta key removal
There's no reason to do this inside the sta key removal
since the keys can only be reached through the sta (and
not by the driver at all) so once the sta can no longer
be reached, the keys are safe.

This will allow further optimisation opportunities with
multiple stations.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16 11:29:46 +01:00
Johannes Berg
d34ba2168a mac80211: don't delay station destruction
If we can assume that stations are never referenced by the
driver after sta_state returns (and this is true since the
previous iwlmvm patch and for all other drivers) then we
don't need to delay station destruction, and don't need to
play tricks with rcu_barrier() etc.

This should speed up some scenarios like hostapd shutdown.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16 11:29:45 +01:00
Johannes Berg
a710c8160d mac80211: move 4-addr sta pointer clearing before synchronize_rcu()
The pointer should be cleared before synchronize_rcu() so that the
consequently dead station won't be found by any lookups in the TX
or RX paths.

Also check that the station is actually the one being removed, the
check is not needed because each 4-addr VLAN can only have a single
station and non-4-addr VLANs always have a NULL pointer there, but
the code is clearer this way (and we avoid the memory write.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16 11:29:45 +01:00
Johannes Berg
1ddbbb0c83 iwlwifi: mvm: use pre-RCU-sync sta removal operation
iwlmvm relies on the current mac80211 behaviour of allowing
station pointers to be valid for an RCU grace period after
returning from the sta_state() callback. To optimise these
cases, this behaviour is going away, so make the driver use
the new sta_pre_rcu_remove() method to clear the pointer in
the fw_id_to_mac_id[] array.

Since this may happen while the station is still present in
the firmware, don't set the pointer to NULL but to -ENOENT
to mark this particular case. In client mode, the station
is kept even longer (until marking the MAC as unassociated)
so the drain flow must take this new behavior into account.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16 11:29:44 +01:00
Johannes Berg
6a9d1b91f3 mac80211: add pre-RCU-sync sta removal driver operation
Currently, mac80211 allows drivers to keep RCU-protected station
references that are cleared when the station is removed from the
driver and consequently needs to synchronize twice, once before
removing the station from the driver (so it can guarantee that
the station is no longer used in TX towards the driver) and once
after the station is removed from the driver.

Add a new pre-RCU-synchronisation station removal operation to
the API to allow drivers to clear/invalidate their RCU-protected
station pointers before the RCU synchronisation.

This will allow removing the second synchronisation by changing
the driver API so that the driver may no longer assume a valid
RCU-protected pointer after sta_remove/sta_state returns.

The alternative to this would be to synchronize_rcu() in all the
drivers that currently rely on this behaviour (only iwlmvm) but
that would defeat the purpose.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16 11:29:44 +01:00
Johannes Berg
c4de673b77 Merge remote-tracking branch 'wireless-next/master' into mac80211-next 2013-12-16 11:23:45 +01:00
Lorenzo Bianconi
55957fb7a0 ath9k: initialize retry chain flags in tx99 code
Initialize first chain flags in ath9k_build_tx99_skb() according to
configured channel mode and channel width

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-11 10:56:22 -05:00
Luciano Coelho
22d072f608 MAINTAINERS: remove myself as maintainer of TI WiLink drivers
I don't have the time to maintain the TI WiLink WLAN drivers anymore.
Remove my name and mark them as Orphan.

Signed-off-by: Luciano Coelho <luca@coelho.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-11 10:56:22 -05:00
Nick Kossifidis
cb161cda63 ath5k: Reset Tx interrupt bits also on PISR
Some cards don't update the PISR properly when all SISR bits
for Tx interrupts are being cleared and as a result we get
interrupt storm. Since we handle all tx queues all together
(so we don't really use the SISR bits to do per-queue interrupt
handling), we can manualy update PISR by doing a write-to-clear
on its Tx interrupt bits.

Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-11 10:56:22 -05:00
Jeff Kirsher
98b32decc8 nfc: Fix FSF address in file headers
Several files refer to an old address for the Free Software Foundation
in the file header comment.  Resolve by replacing the address with
the URL <http://www.gnu.org/licenses/> so that we do not have to keep
updating the header comments anytime the address changes.

CC: linux-wireless@vger.kernel.org
CC: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
CC: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
CC: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-11 10:56:21 -05:00
Jeff Kirsher
8232f1f3d0 rfkill: Fix FSF address in file headers
Several files refer to an old address for the Free Software Foundation
in the file header comment.  Resolve by replacing the address with
the URL <http://www.gnu.org/licenses/> so that we do not have to keep
updating the header comments anytime the address changes.

CC: linux-wireless@vger.kernel.org
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-11 10:56:21 -05:00
Jeff Kirsher
36769159a9 drivers/net/wireless: Fix FSF address in file headers
Several files refer to an old address for the Free Software Foundation
in the file header comment.  Resolve by replacing the address with
the URL <http://www.gnu.org/licenses/> so that we do not have to keep
updating the header comments anytime the address changes.

CC: linux-wireless@vger.kernel.org
CC: Simon Kelley <simon@thekelleys.org.uk>
CC: Christian Lamparter <chunkeey@googlemail.com>
CC: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-11 10:56:20 -05:00
Jeff Kirsher
4280db9d00 prism54: Fix FSF address in file headers
Several files refer to an old address for the Free Software Foundation
in the file header comment.  Resolve by replacing the address with
the URL <http://www.gnu.org/licenses/> so that we do not have to keep
updating the header comments anytime the address changes.

CC: linux-wireless@vger.kernel.org
CC: "Luis R. Rodriguez" <mcgrof@gmail.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-11 10:56:20 -05:00
Jeff Kirsher
a05b8c580c rt2x00: Fix FSF address in file headers
Several files refer to an old address for the Free Software Foundation
in the file header comment.  Resolve by replacing the address with
the URL <http://www.gnu.org/licenses/> so that we do not have to keep
updating the header comments anytime the address changes.

CC: linux-wireless@vger.kernel.org
CC: Ivo van Doorn <IvDoorn@gmail.com>
CC: Gertjan van Wingerde <gwingerde@gmail.com>
CC: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-11 10:56:19 -05:00
Jeff Kirsher
f47cdae42a zd1211rw: Fix FSF address in file headers
Several files refer to an old address for the Free Software Foundation
in the file header comment.  Resolve by replacing the address with
the URL <http://www.gnu.org/licenses/> so that we do not have to keep
updating the header comments anytime the address changes.

CC: linux-wireless@vger.kernel.org
CC: Daniel Drake <dsd@gentoo.org>
CC: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-11 10:56:19 -05:00
John W. Linville
7888b61c15 Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next 2013-12-11 10:54:41 -05:00
John W. Linville
d9a577c35a Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next 2013-12-11 10:49:24 -05:00
Johan Hedberg
71fb419724 Bluetooth: Fix handling of L2CAP Command Reject over LE
If we receive an L2CAP command reject message over LE we should take
appropriate action on the corresponding channel. This is particularly
important when trying to interact with a remote pre-4.1 system using LE
CoC signaling messages. If we don't react to the command reject the
corresponding socket would not be notified until a connection timeout
occurs.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-10 01:15:44 -08:00
Sujith Manoharan
d6b5075d73 ath9k: Apply tuning caps for AR9330 and AR9485
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:38:02 -05:00
Sujith Manoharan
e6d53bdcc3 ath9k: Fix internal regulator for AR955x
The internal regulator needs to be programmed
correctly for AR955x.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:38:01 -05:00
Sujith Manoharan
bb46662894 ath9k: Enable manual peak calibration for AR9331 v1.1
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:38:01 -05:00
Sujith Manoharan
6b416d0511 ath9k: Remove AR9330 v1.0 macro as it's not supported
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:38:01 -05:00
Sujith Manoharan
0c7c2bb4da ath9k: Fix regulatory compliance
Adjusting the CCA registers for maximum permissible
noise floor in ETSI/Japan domains has to be done for
all AR9003 family chips.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:38:00 -05:00
Sujith Manoharan
ca488b921e ath9k: Identify duplicate AR9565 v1.0 initvals
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:38:00 -05:00
Sujith Manoharan
ceb1512ffc ath9k: Identify duplicate AR9462 v2.0 initvals
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:37:59 -05:00
Sujith Manoharan
4b0ec82818 ath9k: Identify duplicate AR9485 initvals
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:37:59 -05:00
Sujith Manoharan
98d7401dbb ath9k: Update high power gain table for AR9300
Now that the Buffalo-specific initvals have been
moved to a separate array, update the default high
power TX gain table for all AR9300 v2.2 devices.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:37:59 -05:00
Sujith Manoharan
0f978bfaf2 ath9k: Use a separate TX gain table for WZR-HP-G450H
The Buffalo device WZR-HP-G450H uses the index 3 for TX gain,
which is set to the high_power table currently. Later variants
of the router use the same index, but instead refer to the
low_ob_db gain table. This is not handled in the driver since
there is no way to distinguish board revisions and the high_power
table is used (incorrectly) for the newer variants.

By default, devices based on AR9300 using the TX gain index 3 have
to use the high_power table. To make sure that WZR-HP-G450H is not
broken when the high_power table is updated, use a separate array
based on information obtained from the platform data.

The current situation where only the original variant of WZR-HP-G450H
works properly stays unchanged.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:37:58 -05:00
Sujith Manoharan
492f478d89 ath9k: Update AR9331 v1.2 initvals
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:37:58 -05:00
Sujith Manoharan
367ba05f3e ath9k: Update AR9331 v1.1 initvals
* Update radio/baseband/gain tables.
* Mark ar9331_modes_high_power_tx_gain_1p1 as a duplicate
* ar9331_1p1_mac_postamble is not a duplicate.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:37:57 -05:00
Sujith Manoharan
11295126e3 ath9k: Remove AR955x INI duplicates
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:37:57 -05:00
Sujith Manoharan
bc73902a03 ath9k: Update mac_postamble for AR9003 family
Enable the ALWAYS_KEYSEARCH bit in the initvals. Currently
this is done in the driver, but adding this to the initvals
makes it easier to be in sync with the INI files given
by the systems engineering team.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:37:56 -05:00
Sujith Manoharan
4a878b9f89 ath9k: Initialize baseband for DFS channels
Certain baseband registers require different values
to be programmed when operating in a DFS channel to
ensure that radar detection works correctly. This
is required for AR9300, AR9340 and AR9580.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:37:56 -05:00
Sujith Manoharan
98b2e1fdf1 ath9k: Add initval arrays for DFS channels
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:37:56 -05:00
Larry Finger
7f3dbb5636 rtlwifi: rtl8192c-common: Fix sparse warning
Sparse reports the following:

  CHECK   drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c
drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c:570:34: warning: dubious: !x & y

There should be a parens around the expression.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:37:55 -05:00
Chun-Yeow Yeoh
fa643ae2ce wcn36xx: enable the beaconing in mesh mode
Enable the beaconing in wnc36xx by tweaking the tim offset and
force the use of AP-style beaconing. Otherwise, beaconing is not
working. The tim offset is set to 256. Otherwise, this will
overwrite mesh beacon submitted by mac80211.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:37:55 -05:00
Chun-Yeow Yeoh
997b179ba3 ath9k: enable dfs for mesh mode
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:37:54 -05:00
Ujjal Roy
bd2a864a14 mwifiex: do not flood kmsg/dmesg with USB debug messages
When TX data URB reaches high water mark the message
"data: -ENOSR is returned" is printed.
This is not an error case, so change it to debug print.

Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:37:54 -05:00
Amitkumar Karwar
c2868adebd mwifiex: remove redundant goto exit_remove statement
The check for 'priv' pointer is redundant. 'priv' won't
be used later in this routine.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:35:31 -05:00
Ujjal Roy
f7b598532f mwifiex: update statistics for bridged packets on AP interface
The bridged packets are updated to statistics on both TX and RX
paths. Also fix a typo in the comment.

Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:35:30 -05:00
Ujjal Roy
a1ed484960 mwifiex: correct TX byte count statistics
The skb is modified in sending the TX packet. Save the original
packet length to a variable so that we can get the correct
statistics update.

Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:35:30 -05:00
Ujjal Roy
f49c6e8142 mwifiex: correct RX byte count statistics
The skb is modified in processing the RX packet. Save the original
packet length to a variable so that we can get the correct
statistics update.

Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:35:29 -05:00
Ujjal Roy
ca8d6dfc92 mwifiex: fix rx_pending count imbalance
RX packets are handled in different paths. Not all paths have
decrement of rx_pending counter. This patch fixes the counter
imbalance.

Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:35:29 -05:00
Bing Zhao
f8eb5ee5f5 mwifiex: avoid using variable name eth_hdr
eth_hdr is defined in kernel. Use a different variable name in
our functions.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:35:29 -05:00
Amitkumar Karwar
c613d16fa7 mwifiex: fix an issue with Appletalk devices
SNAP/LLC header in the AARP packet is being stripped off while
preparing an EthernetII header.
Annex M, Table M.3 in 802.11 spec says that some header
(ex. AppleTalk AARP(2)) should pass through untouched.
This patch modifies the check to exclude/include EthernetII
header translation for special cases.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:35:28 -05:00
Amitkumar Karwar
1bf947a791 mwifiex: remove rfc1042_eth_hdr variable
Use 'rfc1042_header' available in net/wireless/util.c

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09 15:35:28 -05:00