android_kernel_samsung_hero.../arch/arm/boot/dts/qcom/msm8952-qrd-skum.dtsi
2016-08-17 16:41:52 +08:00

279 lines
6.7 KiB
Text

/*
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "msm8952-qrd.dtsi"
&spmi_bus {
qcom,pmi8950@2 {
qcom,leds@a100 {
status = "okay";
qcom,led_mpp_2 {
label = "mpp";
linux,name = "green";
linux,default-trigger = "none";
qcom,default-state = "off";
qcom,max-current = <40>;
qcom,current-setting = <5>;
qcom,id = <6>;
qcom,mode = "manual";
qcom,source-sel = <1>;
qcom,mode-ctrl = <0x60>;
};
};
};
};
&i2c_3 { /* BLSP1 QUP3 */
synaptics@20 {
compatible = "synaptics,rmi4";
reg = <0x20>;
interrupt-parent = <&msm_gpio>;
interrupts = <65 0x2008>;
vdd-supply = <&pm8950_l17>;
vcc_i2c-supply = <&pm8950_l6>;
/* pins used by touchscreen */
pinctrl-names = "pmx_ts_active","pmx_ts_suspend","pmx_ts_release";
pinctrl-0 = <&ts_int_active &ts_reset_active>;
pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
pinctrl-2 = <&ts_release>;
synaptics,display-coords = <0 0 1079 1919>;
synaptics,panel-coords = <0 0 1079 2084>;
synaptics,irq-gpio = <&msm_gpio 65 0x2008>;
synaptics,reset-gpio = <&msm_gpio 64 0x0>;
synaptics,i2c-pull-up;
synaptics,power-down;
synaptics,disable-gpios;
synaptics,bypass-packrat-id-check;
synaptics,button-map = <139 172 158>;
};
};
&soc {
gpio_keys {
compatible = "gpio-keys";
input-name = "gpio-keys";
pinctrl-names = "tlmm_gpio_key_active","tlmm_gpio_key_suspend";
pinctrl-0 = <&gpio_key_active>;
pinctrl-1 = <&gpio_key_suspend>;
vol_up {
label = "volume_up";
gpios = <&msm_gpio 85 0x1>;
linux,input-type = <1>;
linux,code = <115>;
gpio-key,wakeup;
debounce-interval = <15>;
};
home {
label = "home";
gpios = <&msm_gpio 93 0x1>;
linux,input-type = <1>;
linux,code = <102>;
gpio-key,wakeup;
debounce-interval = <15>;
};
};
sound {
compatible = "qcom,msm8952-audio-codec";
qcom,model = "msm8952-skum-snd-card";
reg = <0xc051000 0x4>,
<0xc051004 0x4>,
<0xc055000 0x4>;
reg-names = "csr_gp_io_mux_mic_ctl",
"csr_gp_io_mux_spkr_ctl",
"csr_gp_io_lpaif_pri_pcm_pri_mode_muxsel";
qcom,msm-ext-pa = "primary";
qcom,msm-mclk-freq = <9600000>;
qcom,msm-mbhc-hphl-swh = <1>;
qcom,msm-mbhc-gnd-swh = <0>;
qcom,msm-hs-micbias-type = "internal";
qcom,msm-micbias1-ext-cap;
qcom,msm-micbias2-ext-cap;
qcom,audio-routing =
"RX_BIAS", "MCLK",
"SPK_RX_BIAS", "MCLK",
"INT_LDO_H", "MCLK",
"MIC BIAS External", "Handset Mic",
"MIC BIAS Internal2", "Headset Mic",
"MIC BIAS External", "Secondary Mic",
"AMIC1", "MIC BIAS External",
"AMIC2", "MIC BIAS Internal2",
"AMIC3", "MIC BIAS External",
"SpkrMono WSA_IN", "WSA_SPK OUT";
qcom,msm-gpios =
"pri_i2s";
qcom,pinctrl-names =
"all_off",
"pri_i2s_act";
pinctrl-names =
"all_off",
"pri_i2s_act";
pinctrl-0 = <&cdc_pdm_lines_sus &cdc_pdm_lines_2_sus>;
pinctrl-1 = <&cdc_pdm_lines_act &cdc_pdm_lines_2_act>;
asoc-platform = <&pcm0>, <&pcm1>, <&pcm2>, <&voip>, <&voice>,
<&loopback>, <&compress>, <&hostless>,
<&afe>, <&lsm>, <&routing>, <&lpa>,
<&voice_svc>;
asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-dsp.1", "msm-pcm-dsp.2",
"msm-voip-dsp", "msm-pcm-voice", "msm-pcm-loopback",
"msm-compress-dsp", "msm-pcm-hostless", "msm-pcm-afe",
"msm-lsm-client", "msm-pcm-routing", "msm-pcm-lpa",
"msm-voice-svc";
asoc-cpu = <&dai_pri_auxpcm>, <&dai_hdmi>,
<&dai_mi2s0>, <&dai_mi2s1>, <&dai_mi2s2>, <&dai_mi2s3>,
<&sb_0_rx>, <&sb_0_tx>, <&sb_1_rx>, <&sb_1_tx>,
<&sb_3_rx>, <&sb_3_tx>, <&sb_4_rx>, <&sb_4_tx>,
<&bt_sco_rx>, <&bt_sco_tx>, <&int_fm_rx>, <&int_fm_tx>,
<&afe_pcm_rx>, <&afe_pcm_tx>, <&afe_proxy_rx>, <&afe_proxy_tx>,
<&incall_record_rx>, <&incall_record_tx>, <&incall_music_rx>,
<&incall_music_2_rx>;
asoc-cpu-names = "msm-dai-q6-auxpcm.1", "msm-dai-q6-hdmi.8",
"msm-dai-q6-mi2s.0", "msm-dai-q6-mi2s.1",
"msm-dai-q6-mi2s.2", "msm-dai-q6-mi2s.3",
"msm-dai-q6-dev.16384", "msm-dai-q6-dev.16385",
"msm-dai-q6-dev.16386", "msm-dai-q6-dev.16387",
"msm-dai-q6-dev.16390", "msm-dai-q6-dev.16391",
"msm-dai-q6-dev.16392", "msm-dai-q6-dev.16393",
"msm-dai-q6-dev.12288", "msm-dai-q6-dev.12289",
"msm-dai-q6-dev.12292", "msm-dai-q6-dev.12293",
"msm-dai-q6-dev.224", "msm-dai-q6-dev.225",
"msm-dai-q6-dev.241", "msm-dai-q6-dev.240",
"msm-dai-q6-dev.32771", "msm-dai-q6-dev.32772",
"msm-dai-q6-dev.32773", "msm-dai-q6-dev.32770";
asoc-codec = <&stub_codec>, <&pm8950_cajon_dig>;
asoc-codec-names = "msm-stub-codec.1", "cajon_codec";
};
};
&msm_gpio {
tlmm_gpio_key {
gpio_key_active: gpio_key_active {
mux {
pins = "gpio85", "gpio93";
function = "gpio";
};
config {
pins = "gpio85", "gpios93";
};
};
gpio_key_suspend: gpio_key_suspend {
mux {
pins = "gpio85", "gpio93";
function = "gpio";
};
config {
pins = "gpio85", "gpios93";
};
};
};
};
&pmi8950_haptic {
qcom,vmax-mv = <3300>;
};
&labibb {
status = "ok";
qpnp,qpnp-labibb-mode = "lcd";
};
&pmi8950_charger {
qcom,float-voltage-mv = <4400>;
qcom,chg-led-sw-controls;
qcom,chg-led-support;
status = "okay";
};
/ {
qrd_batterydata: qcom,battery-data {
qcom,batt-id-range-pct = <15>;
#include "batterydata-qrd-skum-4v4-2920mah.dtsi"
};
};
&pmi8950_fg {
qcom,battery-data = <&qrd_batterydata>;
};
&mdss_mdp {
qcom,mdss-pref-prim-intf = "dsi";
};
&msm_gpio {
pmx_mdss {
mdss_dsi_active: mdss_dsi_active {
mux {
pins = "gpio0";
};
config {
pins = "gpio0";
};
};
mdss_dsi_suspend: mdss_dsi_suspend {
mux {
pins = "gpio0";
};
config {
pins = "gpio0";
};
};
};
pmx_mdss_te {
mdss_te_active: mdss_te_active {
mux {
qcom,pins = "gpio24";
};
config {
qcom,pins = "gpio24";
};
};
mdss_te_suspend: mdss_te_suspend {
mux {
qcom,pins = "gpio24";
};
config {
qcom,pins = "gpio24";
};
};
};
};
&mdss_dsi0 {
pinctrl-names = "mdss_default", "mdss_sleep";
pinctrl-0 = <&mdss_dsi_active &mdss_te_active>;
pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>;
qcom,dsi-pref-prim-pan = <&dsi_otm1906c_1080p_cmd>;
qcom,dsi-panel-bias-vreg;
qcom,platform-reset-gpio = <&msm_gpio 0 0>;
};
&sdc2_cd_on {
/delete-property/ bias-pull-up;
bias-disable;
};
&dsi_otm1906c_1080p_cmd {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
};