Ondrej Jirman
f7c90f1f74
firmware: Fix compilation issue by moving timer code a bit higher
2021-08-02 10:22:18 +02:00
Samuel Holland
78b438a747
firmware: Rebuild if any source file changes
...
This catches changes to the stock IVT assembly. Instead of adding that
to the list, use $(wildcard) to be more future-proof.
2021-08-02 10:17:37 +02:00
Samuel Holland
1fd0bac031
firmware: Use REG_SYS macro where appropriate
...
This shortens a very long line.
2021-08-02 10:17:09 +02:00
Samuel Holland
ce6638eb92
firmware: Remove unused variable
2021-08-02 10:14:24 +02:00
Samuel Holland
bd32b43065
usb-flasher: Update stock firmware's USB product ID
...
The third batch of review samples was flashed with a different stock
firmware, and advertised a different product ID.
2021-08-02 10:13:13 +02:00
Samuel Holland
bd69a00f7a
common: Improve crc8 generation
...
Start with 0xff instead of 0x00, so the CRC will be nonzero (and length
dependent) for data that is all zeroes.
Remove unnecessary masking, since `crc` is already an 8-bit integer.
2021-08-02 10:13:06 +02:00
Samuel Holland
206b96c1e2
i2c-flasher: Add missing argument to printf
2021-08-02 10:13:01 +02:00
Ondrej Jirman
28ba6fbcfc
Update TODO
2021-08-02 10:12:48 +02:00
Ondrej Jirman
3b723583e7
firmware: Make interrupt signal shorter (10us)
...
This is long enough, comparable to 100kHz I2C speeds.
2021-08-02 10:12:48 +02:00
Ondrej Jirman
2fbc2e057e
firmware: Implement scanning block
...
This allows to disable the keyboard. The firmware will never scan
for keys pressed in this mode, and it will powerdown the MCU most of the
time.
2021-08-02 10:12:48 +02:00
Ondrej Jirman
41418cdc14
firmware: Jump to stock firmware sooner after powerup
...
Signed-off-by: Ondrej Jirman <megous@megous.com>
2021-08-02 10:12:48 +02:00
Ondrej Jirman
176a2da7e2
firmware: Implement USB enabled/disable control via I2C
2021-08-02 10:05:43 +02:00
Ondrej Jirman
134b4b6a8b
firmware: Move more of the USB shutdown control to usb_enable/usb_disable
...
- make sure USB resources are re-enabled before jumping to bootloader
- make sure all USB resources are disabled prior to jumping to user fw
2021-08-02 10:03:48 +02:00
Ondrej Jirman
cea046008f
Increase the default flashing area size to 0x2000
...
This does two things:
- more reasonable default because stock firmware size is larger than
the previous default
- it will overwrite 0x3fff with 0xff, so that after flashing stock
firmware the user firmware is automatically disabled
2021-06-28 15:36:58 +02:00
Ondrej Jirman
6a5fe581b9
Implement flashing over I2C and user/stock firmware support
...
I2C register layout changed a bit to make various operations easier
to implement in FW and for the user.
Flashing/debugging tools now share more code. Firmware is now more
configurable (it's now possible to compile-out various features).
Self-testing for column-shorts is implemented.
Firmware is optimized for low power consumption.
2021-06-28 15:09:47 +02:00
Ondrej Jirman
201b84d70e
Update link to kernel driver
2021-06-20 13:16:55 +02:00
Ondrej Jirman
2a2ce1429c
Update the i2c interface spec
2021-06-20 01:48:34 +02:00
Ondrej Jirman
f0b5f8cb68
And another update of the I2C spec
2021-06-19 21:42:52 +02:00
Ondrej Jirman
2185fdaae5
Update I2C spec
2021-06-19 21:23:03 +02:00
Ondrej Jirman
541c1ae17a
Add I2C interface specification
2021-06-19 21:15:38 +02:00
Ondrej Jirman
04ca071b09
Fixup/document I2C
2021-06-19 02:51:23 +02:00
Ondrej Jirman
fbfa245ad4
Allow to use debug printing from interrupt handlers
2021-06-19 02:50:34 +02:00
Ondrej Jirman
2725248532
Add USB stack for easier printf() based debugging of the firmware
2021-06-18 19:43:11 +02:00
Ondrej Jirman
f7857f94ab
Add the latest binary build of the firmware
2021-06-18 18:31:28 +02:00
Ondrej Jirman
c8d8eef090
Fix key release change detection in polling mode
2021-06-18 18:28:56 +02:00
Ondrej Jirman
93687e1b04
Add flashing help file
2021-06-18 18:26:58 +02:00
Ondrej Jirman
cea3dfb502
Add link to Samuel's kernel driver
2021-06-18 18:20:19 +02:00
Ondrej Jirman
212dea4914
Tidy up the flashing tool
2021-06-18 18:20:16 +02:00
Ondrej Jirman
c1d2adfc96
Update TODO
2021-06-17 11:40:08 +02:00
Ondrej Jirman
a739b4b856
Add reaped URB error checking
2021-06-17 11:16:58 +02:00
Ondrej Jirman
c8736296c3
Update TODO
2021-06-16 18:19:34 +02:00
Ondrej Jirman
a6f823612a
Build kmap.h as part of a build process
2021-06-16 17:19:38 +02:00
Ondrej Jirman
dba6fb37c1
Add sticky fn/pine mode (press fn+esc or pine+esc to enter, esc to exit it)
...
In sticky mode, fn or pine key acts as stuck.
2021-06-16 17:02:02 +02:00
Ondrej Jirman
ff7e733636
Disable workaround for my broken prototype by default
2021-06-16 16:49:51 +02:00
Ondrej Jirman
a2ff7e6e98
Add uinput daemon that creates an input device for the keyboard
2021-06-16 16:47:59 +02:00
Ondrej Jirman
b9b02a5e73
Update some comments
2021-06-16 14:44:18 +02:00
Ondrej Jirman
2e29c24145
Add HACKING file
2021-06-16 14:32:28 +02:00
Ondrej Jirman
bca8c47f46
Implement polled mode and key bitmap change signalling via external interrupt
...
- this firmware consumes about 4-5 mA (can be probably made lower)
2021-06-16 14:09:25 +02:00
Ondrej Jirman
a9bb6a3691
Add a tool to convert keymap description to a header file
2021-06-15 09:23:10 +02:00
Ondrej Jirman
736018ce82
Fix factory keymap
2021-06-15 09:22:47 +02:00
Ondrej Jirman
a8c9398567
Allow to exit from bootloader mode without flasing
...
Useful for when you hit PINE+FN+F and don't want to flash a firmware.
./kbprog-usb reset
2021-06-15 09:22:31 +02:00
Ondrej Jirman
e59f647d83
Allow to switch to bootloader mode via FN+PINE+F
2021-06-15 09:21:31 +02:00
Ondrej Jirman
8a6af7acf7
Add tool for communicating with the charger
2021-06-15 09:20:43 +02:00
Ondrej Jirman
717cfd6526
Add keymaps
2021-06-14 13:31:54 +02:00
Ondrej Jirman
8250f31e2b
Add links to video/blog/donations
2021-06-14 00:16:19 +02:00
Ondrej Jirman
d3c45f58a4
Initial commit
2021-06-14 00:10:49 +02:00
