virtualx-engine/doc/classes/Generic6DOFJoint.xml

<?xml version="1.0" encoding="UTF-8" ?>
<class name="Generic6DOFJoint" inherits="Joint" category="Core" version="3.0.2">
	<brief_description>
		The generic 6 degrees of freedom joint can implement a variety of joint-types by locking certain axes' rotation or translation.
	</brief_description>
	<description>
		The first 3 dof axes are linear axes, which represent translation of Bodies, and the latter 3 dof axes represent the angular motion. Each axis can be either locked, or limited.
	</description>
	<tutorials>
	</tutorials>
	<demos>
	</demos>
	<methods>
	</methods>
	<members>
		<member name="angular_limit_x/damping" type="float" setter="set_param_x" getter="get_param_x">
			The amount of rotational damping across the x-axis.
			The lower, the longer an impulse from one side takes to travel to the other side.
		</member>
		<member name="angular_limit_x/enabled" type="bool" setter="set_flag_x" getter="get_flag_x">
			If [code]true[/code] rotation across the x-axis is enabled.
		</member>
		<member name="angular_limit_x/erp" type="float" setter="set_param_x" getter="get_param_x">
			When rotating across x-axis, this error tolerance factor defines how much the correction gets slowed down. The lower, the slower.
		</member>
		<member name="angular_limit_x/force_limit" type="float" setter="set_param_x" getter="get_param_x">
			The maximum amount of force that can occur, when rotating around x-axis.
		</member>
		<member name="angular_limit_x/lower_angle" type="float" setter="_set_angular_lo_limit_x" getter="_get_angular_lo_limit_x">
			The minimum rotation in negative direction to break loose and rotate around the x-axis.
		</member>
		<member name="angular_limit_x/restitution" type="float" setter="set_param_x" getter="get_param_x">
			The amount of rotational restitution across the x-axis. The lower, the more restitution occurs.
		</member>
		<member name="angular_limit_x/softness" type="float" setter="set_param_x" getter="get_param_x">
			The speed of all rotations across the x-axis.
		</member>
		<member name="angular_limit_x/upper_angle" type="float" setter="_set_angular_hi_limit_x" getter="_get_angular_hi_limit_x">
			The minimum rotation in positive direction to break loose and rotate around the x-axis.
		</member>
		<member name="angular_limit_y/damping" type="float" setter="set_param_y" getter="get_param_y">
			The amount of rotational damping across the y-axis. The lower, the more dampening occurs.
		</member>
		<member name="angular_limit_y/enabled" type="bool" setter="set_flag_y" getter="get_flag_y">
			If [code]true[/code] rotation across the y-axis is enabled.
		</member>
		<member name="angular_limit_y/erp" type="float" setter="set_param_y" getter="get_param_y">
			When rotating across y-axis, this error tolerance factor defines how much the correction gets slowed down. The lower, the slower.
		</member>
		<member name="angular_limit_y/force_limit" type="float" setter="set_param_y" getter="get_param_y">
			The maximum amount of force that can occur, when rotating around y-axis.
		</member>
		<member name="angular_limit_y/lower_angle" type="float" setter="_set_angular_lo_limit_y" getter="_get_angular_lo_limit_y">
			The minimum rotation in negative direction to break loose and rotate around the y-axis.
		</member>
		<member name="angular_limit_y/restitution" type="float" setter="set_param_y" getter="get_param_y">
			The amount of rotational restitution across the y-axis. The lower, the more restitution occurs.
		</member>
		<member name="angular_limit_y/softness" type="float" setter="set_param_y" getter="get_param_y">
			The speed of all rotations across the y-axis.
		</member>
		<member name="angular_limit_y/upper_angle" type="float" setter="_set_angular_hi_limit_y" getter="_get_angular_hi_limit_y">
			The minimum rotation in positive direction to break loose and rotate around the y-axis.
		</member>
		<member name="angular_limit_z/damping" type="float" setter="set_param_z" getter="get_param_z">
			The amount of rotational damping across the z-axis. The lower, the more dampening occurs.
		</member>
		<member name="angular_limit_z/enabled" type="bool" setter="set_flag_z" getter="get_flag_z">
			If [code]true[/code] rotation across the z-axis is enabled.
		</member>
		<member name="angular_limit_z/erp" type="float" setter="set_param_z" getter="get_param_z">
			When rotating across z-axis, this error tolerance factor defines how much the correction gets slowed down. The lower, the slower.
		</member>
		<member name="angular_limit_z/force_limit" type="float" setter="set_param_z" getter="get_param_z">
			The maximum amount of force that can occur, when rotating around z-axis.
		</member>
		<member name="angular_limit_z/lower_angle" type="float" setter="_set_angular_lo_limit_z" getter="_get_angular_lo_limit_z">
			The minimum rotation in negative direction to break loose and rotate around the z-axis.
		</member>
		<member name="angular_limit_z/restitution" type="float" setter="set_param_z" getter="get_param_z">
			The amount of rotational restitution across the z-axis. The lower, the more restitution occurs.
		</member>
		<member name="angular_limit_z/softness" type="float" setter="set_param_z" getter="get_param_z">
			The speed of all rotations across the z-axis.
		</member>
		<member name="angular_limit_z/upper_angle" type="float" setter="_set_angular_hi_limit_z" getter="_get_angular_hi_limit_z">
			The minimum rotation in positive direction to break loose and rotate around the z-axis.
		</member>
		<member name="angular_motor_x/enabled" type="bool" setter="set_flag_x" getter="get_flag_x">
			If [code]true[/code] a rotating motor at the x-axis is enabled.
		</member>
		<member name="angular_motor_x/force_limit" type="float" setter="set_param_x" getter="get_param_x">
			Maximum acceleration for the motor at the x-axis.
		</member>
		<member name="angular_motor_x/target_velocity" type="float" setter="set_param_x" getter="get_param_x">
			Target speed for the motor at the x-axis.
		</member>
		<member name="angular_motor_y/enabled" type="bool" setter="set_flag_y" getter="get_flag_y">
			If [code]true[/code] a rotating motor at the y-axis is enabled.
		</member>
		<member name="angular_motor_y/force_limit" type="float" setter="set_param_y" getter="get_param_y">
			Maximum acceleration for the motor at the y-axis.
		</member>
		<member name="angular_motor_y/target_velocity" type="float" setter="set_param_y" getter="get_param_y">
			Target speed for the motor at the y-axis.
		</member>
		<member name="angular_motor_z/enabled" type="bool" setter="set_flag_z" getter="get_flag_z">
			If [code]true[/code] a rotating motor at the z-axis is enabled.
		</member>
		<member name="angular_motor_z/force_limit" type="float" setter="set_param_z" getter="get_param_z">
			Maximum acceleration for the motor at the z-axis.
		</member>
		<member name="angular_motor_z/target_velocity" type="float" setter="set_param_z" getter="get_param_z">
			Target speed for the motor at the z-axis.
		</member>
		<member name="linear_limit_x/damping" type="float" setter="set_param_x" getter="get_param_x">
			The amount of damping that happens at the x-motion.
		</member>
		<member name="linear_limit_x/enabled" type="bool" setter="set_flag_x" getter="get_flag_x">
			If [code]true[/code] the linear motion across the x-axis is enabled.
		</member>
		<member name="linear_limit_x/lower_distance" type="float" setter="set_param_x" getter="get_param_x">
			The minimum difference between the pivot points' x-axis.
		</member>
		<member name="linear_limit_x/restitution" type="float" setter="set_param_x" getter="get_param_x">
			The amount of restitution on the x-axis movement The lower, the more momentum gets lost.
		</member>
		<member name="linear_limit_x/softness" type="float" setter="set_param_x" getter="get_param_x">
			A factor applied to the movement across the x-axis The lower, the slower the movement.
		</member>
		<member name="linear_limit_x/upper_distance" type="float" setter="set_param_x" getter="get_param_x">
			The maximum difference between the pivot points' x-axis.
		</member>
		<member name="linear_limit_y/damping" type="float" setter="set_param_y" getter="get_param_y">
			The amount of damping that happens at the y-motion.
		</member>
		<member name="linear_limit_y/enabled" type="bool" setter="set_flag_y" getter="get_flag_y">
			If [code]true[/code] the linear motion across the y-axis is enabled.
		</member>
		<member name="linear_limit_y/lower_distance" type="float" setter="set_param_y" getter="get_param_y">
			The minimum difference between the pivot points' y-axis.
		</member>
		<member name="linear_limit_y/restitution" type="float" setter="set_param_y" getter="get_param_y">
			The amount of restitution on the y-axis movement The lower, the more momentum gets lost.
		</member>
		<member name="linear_limit_y/softness" type="float" setter="set_param_y" getter="get_param_y">
			A factor applied to the movement across the y-axis The lower, the slower the movement.
		</member>
		<member name="linear_limit_y/upper_distance" type="float" setter="set_param_y" getter="get_param_y">
			The maximum difference between the pivot points' y-axis.
		</member>
		<member name="linear_limit_z/damping" type="float" setter="set_param_z" getter="get_param_z">
			The amount of damping that happens at the z-motion.
		</member>
		<member name="linear_limit_z/enabled" type="bool" setter="set_flag_z" getter="get_flag_z">
			If [code]true[/code] the linear motion across the z-axis is enabled.
		</member>
		<member name="linear_limit_z/lower_distance" type="float" setter="set_param_z" getter="get_param_z">
			The minimum difference between the pivot points' z-axis.
		</member>
		<member name="linear_limit_z/restitution" type="float" setter="set_param_z" getter="get_param_z">
			The amount of restitution on the z-axis movement The lower, the more momentum gets lost.
		</member>
		<member name="linear_limit_z/softness" type="float" setter="set_param_z" getter="get_param_z">
			A factor applied to the movement across the z-axis The lower, the slower the movement.
		</member>
		<member name="linear_limit_z/upper_distance" type="float" setter="set_param_z" getter="get_param_z">
			The maximum difference between the pivot points' z-axis.
		</member>
	</members>
	<constants>
		<constant name="PARAM_LINEAR_LOWER_LIMIT" value="0" enum="Param">
			The minimum difference between the pivot points' axes.
		</constant>
		<constant name="PARAM_LINEAR_UPPER_LIMIT" value="1" enum="Param">
			The maximum difference between the pivot points' axes.
		</constant>
		<constant name="PARAM_LINEAR_LIMIT_SOFTNESS" value="2" enum="Param">
			A factor applied to the movement across the axes The lower, the slower the movement.
		</constant>
		<constant name="PARAM_LINEAR_RESTITUTION" value="3" enum="Param">
			The amount of restitution on the axes movement The lower, the more momentum gets lost.
		</constant>
		<constant name="PARAM_LINEAR_DAMPING" value="4" enum="Param">
			The amount of damping that happens at the linear motion across the axes.
		</constant>
		<constant name="PARAM_ANGULAR_LOWER_LIMIT" value="5" enum="Param">
			The minimum rotation in negative direction to break loose and rotate around the axes.
		</constant>
		<constant name="PARAM_ANGULAR_UPPER_LIMIT" value="6" enum="Param">
			The minimum rotation in positive direction to break loose and rotate around the axes.
		</constant>
		<constant name="PARAM_ANGULAR_LIMIT_SOFTNESS" value="7" enum="Param">
			The speed of all rotations across the axes.
		</constant>
		<constant name="PARAM_ANGULAR_DAMPING" value="8" enum="Param">
			The amount of rotational damping across the axes. The lower, the more dampening occurs.
		</constant>
		<constant name="PARAM_ANGULAR_RESTITUTION" value="9" enum="Param">
			The amount of rotational restitution across the axes. The lower, the more restitution occurs.
		</constant>
		<constant name="PARAM_ANGULAR_FORCE_LIMIT" value="10" enum="Param">
			The maximum amount of force that can occur, when rotating around the axes.
		</constant>
		<constant name="PARAM_ANGULAR_ERP" value="11" enum="Param">
			When rotating across the axes, this error tolerance factor defines how much the correction gets slowed down. The lower, the slower.
		</constant>
		<constant name="PARAM_ANGULAR_MOTOR_TARGET_VELOCITY" value="12" enum="Param">
			Target speed for the motor at the axes.
		</constant>
		<constant name="PARAM_ANGULAR_MOTOR_FORCE_LIMIT" value="13" enum="Param">
			Maximum acceleration for the motor at the axes.
		</constant>
		<constant name="PARAM_MAX" value="14" enum="Param">
			End flag of PARAM_* constants, used internally.
		</constant>
		<constant name="FLAG_ENABLE_LINEAR_LIMIT" value="0" enum="Flag">
			If [code]set[/code] there is linear motion possible within the given limits.
		</constant>
		<constant name="FLAG_ENABLE_ANGULAR_LIMIT" value="1" enum="Flag">
			If [code]set[/code] there is rotational motion possible.
		</constant>
		<constant name="FLAG_ENABLE_MOTOR" value="2" enum="Flag">
			If [code]set[/code] there is a rotational motor across these axes.
		</constant>
		<constant name="FLAG_MAX" value="3" enum="Flag">
			End flag of FLAG_* constants, used internally.
		</constant>
	</constants>
</class>