Nodes are Godot's building blocks. They can be assigned as the child of another node, resulting in a tree arrangement. A given node can contain any number of nodes as children with the requirement that all siblings (direct children of a node) should have unique names.
A tree of nodes is called a [i]scene[/i]. Scenes can be saved to the disk and then instantiated into other scenes. This allows for very high flexibility in the architecture and data model of Godot projects.
[b]Scene tree:[/b] The [SceneTree] contains the active tree of nodes. When a node is added to the scene tree, it receives the [constant NOTIFICATION_ENTER_TREE] notification and its [method _enter_tree] callback is triggered. Child nodes are always added [i]after[/i] their parent node, i.e. the [method _enter_tree] callback of a parent node will be triggered before its child's.
Once all nodes have been added in the scene tree, they receive the [constant NOTIFICATION_READY] notification and their respective [method _ready] callbacks are triggered. For groups of nodes, the [method _ready] callback is called in reverse order, starting with the children and moving up to the parent nodes.
This means that when adding a node to the scene tree, the following order will be used for the callbacks: [method _enter_tree] of the parent, [method _enter_tree] of the children, [method _ready] of the children and finally [method _ready] of the parent (recursively for the entire scene tree).
[b]Processing:[/b] Nodes can override the "process" state, so that they receive a callback on each frame requesting them to process (do something). Normal processing (callback [method _process], toggled with [method set_process]) happens as fast as possible and is dependent on the frame rate, so the processing time [i]delta[/i] (in seconds) is passed as an argument. Physics processing (callback [method _physics_process], toggled with [method set_physics_process]) happens a fixed number of times per second (60 by default) and is useful for code related to the physics engine.
Nodes can also process input events. When present, the [method _input] function will be called for each input that the program receives. In many cases, this can be overkill (unless used for simple projects), and the [method _unhandled_input] function might be preferred; it is called when the input event was not handled by anyone else (typically, GUI [Control] nodes), ensuring that the node only receives the events that were meant for it.
To keep track of the scene hierarchy (especially when instancing scenes into other scenes), an "owner" can be set for the node with the [member owner] property. This keeps track of who instantiated what. This is mostly useful when writing editors and tools, though.
[b]Groups:[/b] Nodes can be added to as many groups as you want to be easy to manage, you could create groups like "enemies" or "collectables" for example, depending on your game. See [method add_to_group], [method is_in_group] and [method remove_from_group]. You can then retrieve all nodes in these groups, iterate them and even call methods on groups via the methods on [SceneTree].
[b]Networking with nodes:[/b] After connecting to a server (or making one, see [ENetMultiplayerPeer]), it is possible to use the built-in RPC (remote procedure call) system to communicate over the network. By calling [method rpc] with a method name, it will be called locally and in all connected peers (peers = clients and the server that accepts connections). To identify which node receives the RPC call, Godot will use its [NodePath] (make sure node names are the same on all peers). Also, take a look at the high-level networking tutorial and corresponding demos.
[b]Note:[/b] The [code]script[/code] property is part of the [Object] class, not [Node]. It isn't exposed like most properties but does have a setter and getter ([code]set_script()[/code] and [code]get_script()[/code]).
Called when the node enters the [SceneTree] (e.g. upon instancing, scene changing, or after calling [method add_child] in a script). If the node has children, its [method _enter_tree] callback will be called first, and then that of the children.
Called when the node is about to leave the [SceneTree] (e.g. upon freeing, scene changing, or after calling [method remove_child] in a script). If the node has children, its [method _exit_tree] callback will be called last, after all its children have left the tree.
Corresponds to the [constant NOTIFICATION_EXIT_TREE] notification in [method Object._notification] and signal [signal tree_exiting]. To get notified when the node has already left the active tree, connect to the [signal tree_exited].
The elements in the array returned from this method are displayed as warnings in the Scene Dock if the script that overrides it is a [code]tool[/code] script.
Returning an empty array produces no warnings.
Call [method update_configuration_warnings] when the warnings need to be updated for this node.
It is only called if input processing is enabled, which is done automatically if this method is overridden, and can be toggled with [method set_process_input].
For gameplay input, [method _unhandled_input] and [method _unhandled_key_input] are usually a better fit as they allow the GUI to intercept the events first.
Called during the physics processing step of the main loop. Physics processing means that the frame rate is synced to the physics, i.e. the [param delta] variable should be constant. [param delta] is in seconds.
It is only called if physics processing is enabled, which is done automatically if this method is overridden, and can be toggled with [method set_physics_process].
Called during the processing step of the main loop. Processing happens at every frame and as fast as possible, so the [param delta] time since the previous frame is not constant. [param delta] is in seconds.
Called when the node is "ready", i.e. when both the node and its children have entered the scene tree. If the node has children, their [method _ready] callbacks get triggered first, and the parent node will receive the ready notification afterwards.
Corresponds to the [constant NOTIFICATION_READY] notification in [method Object._notification]. See also the [code]@onready[/code] annotation for variables.
[b]Note:[/b] [method _ready] may be called only once for each node. After removing a node from the scene tree and adding it again, [code]_ready[/code] will not be called a second time. This can be bypassed by requesting another call with [method request_ready], which may be called anywhere before adding the node again.
Called when an [InputEventKey] or [InputEventShortcut] hasn't been consumed by [method _input] or any GUI [Control] item. The input event propagates up through the node tree until a node consumes it.
It is only called if shortcut processing is enabled, which is done automatically if this method is overridden, and can be toggled with [method set_process_shortcut_input].
To consume the input event and stop it propagating further to other nodes, [method Viewport.set_input_as_handled] can be called.
This method can be used to handle shortcuts.
[b]Note:[/b] This method is only called if the node is present in the scene tree (i.e. if it's not orphan).
Called when an [InputEvent] hasn't been consumed by [method _input] or any GUI [Control] item. The input event propagates up through the node tree until a node consumes it.
It is only called if unhandled input processing is enabled, which is done automatically if this method is overridden, and can be toggled with [method set_process_unhandled_input].
For gameplay input, this and [method _unhandled_key_input] are usually a better fit than [method _input] as they allow the GUI to intercept the events first.
Called when an [InputEventKey] or [InputEventShortcut] hasn't been consumed by [method _input] or any GUI [Control] item. The input event propagates up through the node tree until a node consumes it.
It is only called if unhandled key input processing is enabled, which is done automatically if this method is overridden, and can be toggled with [method set_process_unhandled_key_input].
This method can be used to handle Unicode character input with [kbd]Alt[/kbd], [kbd]Alt + Ctrl[/kbd], and [kbd]Alt + Shift[/kbd] modifiers, after shortcuts were handled.
For gameplay input, this and [method _unhandled_input] are usually a better fit than [method _input] as they allow the GUI to intercept the events first.
Adds a child node. Nodes can have any number of children, but every child must have a unique name. Child nodes are automatically deleted when the parent node is deleted, so an entire scene can be removed by deleting its topmost node.
If [param legible_unique_name] is [code]true[/code], the child node will have a human-readable name based on the name of the node being instantiated instead of its type.
If [param internal] is different than [constant INTERNAL_MODE_DISABLED], the child will be added as internal node. Such nodes are ignored by methods like [method get_children], unless their parameter [code]include_internal[/code] is [code]true[/code].The intended usage is to hide the internal nodes from the user, so the user won't accidentally delete or modify them. Used by some GUI nodes, e.g. [ColorPicker]. See [enum InternalMode] for available modes.
[b]Note:[/b] If the child node already has a parent, the function will fail. Use [method remove_child] first to remove the node from its current parent. For example:
[b]Note:[/b] If you want a child to be persisted to a [PackedScene], you must set [member owner] in addition to calling [method add_child]. This is typically relevant for [url=$DOCS_URL/tutorials/misc/running_code_in_the_editor.html]tool scripts[/url] and [url=$DOCS_URL/tutorials/plugins/editor/index.html]editor plugins[/url]. If [method add_child] is called without setting [member owner], the newly added [Node] will not be visible in the scene tree, though it will be visible in the 2D/3D view.
Adds a [param sibling] node to current's node parent, at the same level as that node, right below it.
If [param legible_unique_name] is [code]true[/code], the child node will have a human-readable name based on the name of the node being instantiated instead of its type.
Adds the node to a group. Groups are helpers to name and organize a subset of nodes, for example "enemies" or "collectables". A node can be in any number of groups. Nodes can be assigned a group at any time, but will not be added until they are inside the scene tree (see [method is_inside_tree]). See notes in the description, and the group methods in [SceneTree].
[b]Note:[/b] For performance reasons, the order of node groups is [i]not[/i] guaranteed. The order of node groups should not be relied upon as it can vary across project runs.
Returns [code]true[/code] if the node can process while the scene tree is paused (see [member process_mode]). Always returns [code]true[/code] if the scene tree is not paused, and [code]false[/code] if the node is not in the tree.
[b]Note:[/b] It will not work properly if the node contains a script with constructor arguments (i.e. needs to supply arguments to [method Object._init] method). In that case, the node will be duplicated without a script.
Finds the first descendant of this node whose name matches [param pattern] as in [method String.match].
[param pattern] does not match against the full path, just against individual node names. It is case-sensitive, with [code]"*"[/code] matching zero or more characters and [code]"?"[/code] matching any single character except [code]"."[/code]).
If [param recursive] is [code]true[/code], all child nodes are included, even if deeply nested. Nodes are checked in tree order, so this node's first direct child is checked first, then its own direct children, etc., before moving to the second direct child, and so on. If [param recursive] is [code]false[/code], only this node's direct children are matched.
If [param owned] is [code]true[/code], this method only finds nodes who have an assigned [member Node.owner]. This is especially important for scenes instantiated through a script, because those scenes don't have an owner.
Returns [code]null[/code] if no matching [Node] is found.
[b]Note:[/b] As this method walks through all the descendants of the node, it is the slowest way to get a reference to another node. Whenever possible, consider using [method get_node] with unique names instead (see [member unique_name_in_owner]), or caching the node references into variable.
[b]Note:[/b] To find all descendant nodes matching a pattern or a class type, see [method find_children].
Finds descendants of this node whose name matches [param pattern] as in [method String.match], and/or type matches [param type] as in [method Object.is_class].
[param pattern] does not match against the full path, just against individual node names. It is case-sensitive, with [code]"*"[/code] matching zero or more characters and [code]"?"[/code] matching any single character except [code]"."[/code]).
[param type] will check equality or inheritance, and is case-sensitive. [code]"Object"[/code] will match a node whose type is [code]"Node"[/code] but not the other way around.
If [param recursive] is [code]true[/code], all child nodes are included, even if deeply nested. Nodes are checked in tree order, so this node's first direct child is checked first, then its own direct children, etc., before moving to the second direct child, and so on. If [param recursive] is [code]false[/code], only this node's direct children are matched.
If [param owned] is [code]true[/code], this method only finds nodes who have an assigned [member Node.owner]. This is especially important for scenes instantiated through a script, because those scenes don't have an owner.
Returns an empty array if no matching nodes are found.
[b]Note:[/b] As this method walks through all the descendants of the node, it is the slowest way to get references to other nodes. Whenever possible, consider caching the node references into variables.
[b]Note:[/b] If you only want to find the first descendant node that matches a pattern, see [method find_child].
Finds the first parent of the current node whose name matches [param pattern] as in [method String.match].
[param pattern] does not match against the full path, just against individual node names. It is case-sensitive, with [code]"*"[/code] matching zero or more characters and [code]"?"[/code] matching any single character except [code]"."[/code]).
[b]Note:[/b] As this method walks upwards in the scene tree, it can be slow in large, deeply nested scene trees. Whenever possible, consider using [method get_node] with unique names instead (see [member unique_name_in_owner]), or caching the node references into variable.
If [param include_internal] is [code]false[/code], the returned array won't include internal children (see [code]internal[/code] parameter in [method add_child]).
[b]Note:[/b] For performance reasons, the order of node groups is [i]not[/i] guaranteed. The order of node groups should not be relied upon as it can vary across project runs.
[b]Note:[/b] The engine uses some group names internally (all starting with an underscore). To avoid conflicts with internal groups, do not add custom groups whose name starts with an underscore. To exclude internal groups while looping over [method get_groups], use the following snippet:
[codeblock]
# Stores the node's non-internal groups only (as an array of Strings).
If [param include_internal] is [code]false[/code], the index won't take internal children into account, i.e. first non-internal child will have index of 0 (see [code]internal[/code] parameter in [method add_child]).
Fetches a node. The [NodePath] can be either a relative path (from the current node) or an absolute path (in the scene tree) to a node. If the path does not exist, [code]null[/code] is returned and an error is logged. Attempts to access methods on the return value will result in an "Attempt to call <method> on a null instance." error.
Fetches a node and one of its resources as specified by the [NodePath]'s subname (e.g. [code]Area2D/CollisionShape2D:shape[/code]). If several nested resources are specified in the [NodePath], the last one will be fetched.
The return value is an array of size 3: the first index points to the [Node] (or [code]null[/code] if not found), the second index points to the [Resource] (or [code]null[/code] if not found), and the third index is the remaining [NodePath], if any.
For example, assuming that [code]Area2D/CollisionShape2D[/code] is a valid node and that its [code]shape[/code] property has been assigned a [RectangleShape2D] resource, one could have this kind of output:
Returns the time elapsed (in seconds) since the last physics-bound frame (see [method _physics_process]). This is always a constant value in physics processing unless the frames per second is changed via [member Engine.physics_ticks_per_second].
Returns [code]true[/code] if the [NodePath] points to a valid node and its subname points to a valid resource, e.g. [code]Area2D/CollisionShape2D:shape[/code]. Properties with a non-[Resource] type (e.g. nodes or primitive math types) are not considered resources.
Returns [code]true[/code] if [param node] has editable children enabled relative to this node. This method is only intended for use with editor tooling.
Moves a child node to a different position (order) among the other children. Since calls, signals, etc are performed by tree order, changing the order of children nodes may be useful.
Prints all orphan nodes (nodes outside the [SceneTree]). Used for debugging.
[b]Note:[/b] [method print_orphan_nodes] only works in debug builds. When called in a project exported in release mode, [method print_orphan_nodes] will not print anything.
Prints the tree to stdout. Used mainly for debugging purposes. This version displays the path relative to the current node, and is good for copy/pasting into the [method get_node] function.
Similar to [method print_tree], this prints the tree to stdout. This version displays a more graphical representation similar to what is displayed in the scene inspector. It is useful for inspecting larger trees.
Calls the given method (if present) with the arguments given in [param args] on this node and recursively on all its children. If the [param parent_first] argument is [code]true[/code], the method will be called on the current node first, then on all its children. If [param parent_first] is [code]false[/code], the children will be called first.
Queues a node for deletion at the end of the current frame. When deleted, all of its child nodes will be deleted as well. This method ensures it's safe to delete the node, contrary to [method Object.free]. Use [method Object.is_queued_for_deletion] to check whether a node will be deleted at the end of the frame.
Moves this node to the bottom of parent node's children hierarchy. This is often useful in GUIs ([Control] nodes), because their order of drawing depends on their order in the tree. The top Node is drawn first, then any siblings below the top Node in the hierarchy are successively drawn on top of it. After using [code]raise[/code], a Control will be drawn on top of its siblings.
Removes a node and sets all its children as children of the parent node (if it exists). All event subscriptions that pass by the removed node will be unsubscribed.
[b]Note:[/b] This function may set the [member owner] of the removed Node (or its descendants) to be [code]null[/code], if that [member owner] is no longer a parent or ancestor.
[b]Note:[/b] The given node will become the new parent of any child nodes that the replaced node had.
[b]Note:[/b] The replaced node is not automatically freed, so you either need to keep it in a variable for later use or free it using [method Object.free].
Requests that [code]_ready[/code] be called again. Note that the method won't be called immediately, but is scheduled for when the node is added to the scene tree again (see [method _ready]). [code]_ready[/code] is called only for the node which requested it, which means that you need to request ready for each child if you want them to call [code]_ready[/code] too (in which case, [code]_ready[/code] will be called in the same order as it would normally).
Sends a remote procedure call request for the given [param method] to peers on the network (and locally), optionally sending all additional arguments as arguments to the method called by the RPC. The call request will only be received by nodes with the same [NodePath], including the exact same node name. Behaviour depends on the RPC configuration for the given method, see [method rpc_config]. Methods are not exposed to RPCs by default. Returns [code]null[/code].
[b]Note:[/b] You can only safely use RPCs on clients after you received the [code]connected_to_server[/code] signal from the [MultiplayerAPI]. You also need to keep track of the connection state, either by the [MultiplayerAPI] signals like [code]server_disconnected[/code] or by checking [code]get_multiplayer().peer.get_connection_status() == CONNECTION_CONNECTED[/code].
Changes the RPC mode for the given [param method] with the given [param config] which should be [code]null[/code] (to disable) or a [Dictionary] in the form:
See [enum MultiplayerAPI.RPCMode] and [enum MultiplayerPeer.TransferMode]. An alternative is annotating methods and properties with the corresponding annotation ([code]@rpc(any)[/code], [code]@rpc(authority)[/code]). By default, methods are not exposed to networking (and RPCs).
Sets the node's multiplayer authority to the peer with the given peer ID. The multiplayer authority is the peer that has authority over the node on the network. Useful in conjunction with [method rpc_config] and the [MultiplayerAPI]. Inherited from the parent node by default, which ultimately defaults to peer ID 1 (the server). If [param recursive], the given peer is recursively set as the authority for all children of this node.
Enables or disables physics (i.e. fixed framerate) processing. When a node is being processed, it will receive a [constant NOTIFICATION_PHYSICS_PROCESS] at a fixed (usually 60 FPS, see [member Engine.physics_ticks_per_second] to change) interval (and the [method _physics_process] callback will be called if exists). Enabled automatically if [method _physics_process] is overridden. Any calls to this before [method _ready] will be ignored.
Enables or disables internal physics for this node. Internal physics processing happens in isolation from the normal [method _physics_process] calls and is used by some nodes internally to guarantee proper functioning even if the node is paused or physics processing is disabled for scripting ([method set_physics_process]). Only useful for advanced uses to manipulate built-in nodes' behavior.
[b]Warning:[/b] Built-in Nodes rely on the internal processing for their own logic, so changing this value from your code may lead to unexpected behavior. Script access to this internal logic is provided for specific advanced uses, but is unsafe and not supported.
Enables or disables processing. When a node is being processed, it will receive a [constant NOTIFICATION_PROCESS] on every drawn frame (and the [method _process] callback will be called if exists). Enabled automatically if [method _process] is overridden. Any calls to this before [method _ready] will be ignored.
Enables or disables input processing. This is not required for GUI controls! Enabled automatically if [method _input] is overridden. Any calls to this before [method _ready] will be ignored.
Enables or disabled internal processing for this node. Internal processing happens in isolation from the normal [method _process] calls and is used by some nodes internally to guarantee proper functioning even if the node is paused or processing is disabled for scripting ([method set_process]). Only useful for advanced uses to manipulate built-in nodes' behavior.
[b]Warning:[/b] Built-in Nodes rely on the internal processing for their own logic, so changing this value from your code may lead to unexpected behavior. Script access to this internal logic is provided for specific advanced uses, but is unsafe and not supported.
Enables shortcut processing. Enabled automatically if [method _shortcut_input] is overridden. Any calls to this before [method _ready] will be ignored.
Enables unhandled input processing. This is not required for GUI controls! It enables the node to receive all input that was not previously handled (usually by a [Control]). Enabled automatically if [method _unhandled_input] is overridden. Any calls to this before [method _ready] will be ignored.
Enables unhandled key input processing. Enabled automatically if [method _unhandled_key_input] is overridden. Any calls to this before [method _ready] will be ignored.
The name of the node. This name is unique among the siblings (other child nodes from the same parent). When set to an existing name, the node will be automatically renamed.
[b]Note:[/b] Auto-generated names might include the [code]@[/code] character, which is reserved for unique names when using [method add_child]. When setting the name manually, any [code]@[/code] will be removed.
The node owner. A node can have any other node as owner (as long as it is a valid parent, grandparent, etc. ascending in the tree). When saving a node (using [PackedScene]), all the nodes it owns will be saved with it. This allows for the creation of complex [SceneTree]s, with instancing and subinstancing.
[b]Note:[/b] If you want a child to be persisted to a [PackedScene], you must set [member owner] in addition to calling [method add_child]. This is typically relevant for [url=$DOCS_URL/tutorials/misc/running_code_in_the_editor.html]tool scripts[/url] and [url=$DOCS_URL/tutorials/plugins/editor/index.html]editor plugins[/url]. If [method add_child] is called without setting [member owner], the newly added [Node] will not be visible in the scene tree, though it will be visible in the 2D/3D view.
Can be used to pause or unpause the node, or make the node paused based on the [SceneTree], or make it inherit the process mode from its parent (default).
The node's priority in the execution order of the enabled processing callbacks (i.e. [constant NOTIFICATION_PROCESS], [constant NOTIFICATION_PHYSICS_PROCESS] and their internal counterparts). Nodes whose process priority value is [i]lower[/i] will have their processing callbacks executed first.
If a scene is instantiated from a file, its topmost node contains the absolute file path from which it was loaded in [member scene_file_path] (e.g. [code]res://levels/1.tscn[/code]). Otherwise, [member scene_file_path] is set to an empty string.
Sets this node's name as a unique name in its [member owner]. This allows the node to be accessed as [code]%Name[/code] instead of the full path, from any node within that scene.
If another node with the same owner already had that name declared as unique, that other node's name will no longer be set as having a unique name.
Emitted when a child node is about to exit the scene tree, either because it is being removed or freed directly, or because this node is exiting the tree.
When this signal is received, the child [param node] is still in the tree and valid. This signal is emitted [i]after[/i] the child node's own [signal tree_exiting] and [constant NOTIFICATION_EXIT_TREE].
Notification received when the node's name or one of its parents' name is changed. This notification is [i]not[/i] received when the node is removed from the scene tree to be added to another parent later on.
Notification received when the node is ready, just before [constant NOTIFICATION_READY] is received. Unlike the latter, it's sent every time the node enters tree, instead of only once.
Notification received right before the scene with the node is saved in the editor. This notification is only sent in the Godot editor and will not occur in exported projects.
Notification received right after the scene with the node is saved in the editor. This notification is only sent in the Godot editor and will not occur in exported projects.
Notification received from the OS when the node's parent [Window] is focused. This may be a change of focus between two windows of the same engine instance, or from the OS desktop or a third-party application to a window of the game (in which case [constant NOTIFICATION_APPLICATION_FOCUS_IN] is also emitted).
Notification received from the OS when the node's parent [Window] is defocused. This may be a change of focus between two windows of the same engine instance, or from a window of the game to the OS desktop or a third-party application (in which case [constant NOTIFICATION_APPLICATION_FOCUS_OUT] is also emitted).
Notification received when translations may have changed. Can be triggered by the user changing the locale. Can be used to respond to language changes, for example to change the UI strings on the fly. Useful when working with the built-in translation support, like [method Object.tr].
Notification received from the OS when the application is focused, i.e. when changing the focus from the OS desktop or a thirdparty application to any open window of the Godot instance.
Notification received from the OS when the application is defocused, i.e. when changing the focus from any open window of the Godot instance to the OS desktop or a thirdparty application.
