The program would fail if the parameter is passed as null in set_primary_interface because
in the print_verbose, the get_namea) method is called on the parameter and this causes a
failure if the parameter that was passed is null.
The moment of inertia calculation for BoxShape is:
```
Vector3(
(p_mass / 3.0) * (ly * ly + lz * lz),
(p_mass / 3.0) * (lx * lx + lz * lz),
(p_mass / 3.0) * (lx * lx + ly * ly));
```
where the final line includes both the x and y extents.
However, for CapsuleShape3D, CylinderShape3D, ConvexPolygonShape3D, ConcavePolygonShape3D, and HeightMapShape3D, the final line read `(p_mass / 3.0) * (extents.y * extents.y + extents.y * extents.y)`. I believe this is a mistake, considering the comment in each case mentions using an AABB approximation, which should follow the same approach as BoxShape.
This change corrects the final line to include both the x and y components of the shape's extent.
The angular velocity estimate for kinematic bodies was calculated
incorrectly. Also, fixes its use in some kinematic/rigid collision
calculations.
3.3 version of #47130
Test specific axes before falling back to GJK-EPA algorithm to get more
accurate separation axes for common cases, the same way it's done for
cylinder-cylinder collision.
In the case of falling back to GJK-EPA algorithm to generate cylinder
contact points, margins were never taken into account.
This fixes the depenetration phase for kinematic bodies and allows
consistent floor detection for cylinder shapes.
- Fix objects with no material being considered as fully transparent by the lightmapper.
- Added "environment_min_light" property: gives artistic control over the shadow color.
- Fixed "Custom Color" environment mode, it was ignored before.
- Added "interior" property to BakedLightmapData: controls whether dynamic capture objects receive environment light or not.
- Automatically update dynamic capture objects when the capture data changes (also works for "energy" which used to require object movement to trigger the update).
- Added "use_in_baked_light" property to GridMap: controls whether the GridMap will be included in BakedLightmap bakes.
- Set "flush zero" and "denormal zero" mode for SSE2 instructions in the Embree raycaster. According to Embree docs it should give a performance improvement.
Changes default ninepatch mode to preserve compatibility, and renames default mode to 'fixed'.
Also adds an editor restart to changing ninepatch mode and software skinning, which will be more user friendly.
More work is needed to make sure that those options actually solve users' issues, so we prefer to remove the options for 3.2.4 and revisit for a future release.
Automatically set the `baked_light` bool when applying a lightmap to an
instance. This ensures the disabling of dynamic lights when the
bake mode is set to ALL.
The rendering/quality/2d section of project settings is becoming considerably expanded in 3.2.4, and arguably was not the correct place for settings that were not really to do with quality.
3.2.4 is the last sensible opportunity we will have to move these settings, as the only existing one likely to break compatibility in a small way is `pixel_snap`, and given that the whole snapping area is being overhauled we can draw attention to the fact it has changed in the release notes.
Class reference is also updated and slightly improved.
`pixel_snap` is renamed to `gpu_pixel_snap` in the project settings and code to help differentiate from CPU side transform snapping.
Two common problems have emerged as a result of transform snapping:
1) Camera jitter with a camera following a snapped object
2) Pixel gaps between e.g. a platform and a player, where a platform rounds down and a player rounds up
Using round seems to greatly reduce problems due to camera jitter. It also may prove better for pixel gaps because pixel art is often designed on a grid, so whole numbers are too expected, which are unstable with floor().
These are benign but worth fixing as it clears the log to find more important errors.
A common problem with the sanitizer is that enums are often used to represent bits (e.g. 1, 2, 4, 8 etc) but without specifying the enum type, the compiler is free to use unsigned or signed int. In this case it uses int, and when it performs bitwise operations on the int type, the sanitizer complains.
This is probably because a bitshift with negative signed value can give undefined behaviour - the sanitizer can't know ahead of time that you are using the enum for sensible bitflags.
- Based on C++11's `atomic`
- Reworked `SafeRefCount` (based on the rewrite by @hpvb)
- Replaced free atomic functions by the new `SafeNumeric<T>`
- Replaced wrong cases of `volatile` by the new `SafeFlag`
- Platform-specific implementations no longer needed
Co-authored-by: Hein-Pieter van Braam-Stewart <hp@tmm.cx>
- Based on C++11's `thread` and `thread_local`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed (except for the few cases of non-portable functions)
- Simpler for `NO_THREADS`
- Thread ids are now the same across platforms (main is 1; others follow)
- Based on C++11's `mutex` and `condition_variable`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed
- Simpler for `NO_THREADS`
- Based on C++11's `mutex`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed
- Simpler for `NO_THREADS`
- `BinaryMutex` added for special cases as the non-recursive version
- `MutexLock` now takes a reference. At this point the cases of null `Mutex`es are rare. If you ever need that, just don't use `MutexLock`.
- `ScopedMutexLock` is dropped and replaced by `MutexLock`, because they were pretty much the same.
This change makes test_body_motion more reliable when the kinematic body
recovers from being stuck.
- When recovery occurs, the rest information is generated, in order to
make sure collision results from test_move, move_and_collide and
move_and_slide are consistent and return a collision in case of overlap.
- The new calculation for recovery vector makes sure the recovery is
never more than the overlap depth between shapes.
This can help with cases where the kinematic body overlaps with several
shapes.
Recovery is made iteratively, without forcing a full overlap at each
step. This helps with getting proper rest information when recovery
occurs.
- One Way Collision:
When attempting motion, contact direction is checked against motion
before skipping in order to solve cases where kinematic bodies can sink
into one-way collision shapes.
Rest info now sets max contact depth in order to properly handle one-way
collision.
- Low speed motion is now handled in the rest info, by never setting
min_allowed_depth lower than motion length.
Separation is always applied with full margin, otherwise contact is lost
when low speed motion occurs right after higher speed motion.
- Similar changes are applied to 3D in order to make 2D and 3D
consistent.
When making items visible from the visual server, the collision check is deferred to prevent two identical collision checks when set_pairable is called shortly after.
It turns out that for some items (especially meshes), set_pairable is never called. This PR detects this occurrence and forces a collision check at the end of the routine.
Channels that are inactive -or when playback has not started yet- will report -200 dB as their peak value (which is also the lowest value possible during playback).
(cherry picked from commit a2b3a73e2d)
Move definition of rendering/quality/filters/anisotropic_filter_level to
servers/visual_server.cpp, since both GLES2 and GLES3 now use it
rasterizer_storage_gles3.cpp: Remove a spurious variable write (the
value gets overwritten soon after)
A major feature lacking in the octree was proper support for setting visibility / activation. This meant that invisible objects were still causing lots of processing in the tree unnecessarily.
This PR adds proper support for activation, items are temporarily removed from the tree and collision detection when inactive.
