Shape metadata was only used to get tile information when colliding with
tilemaps. It's not needed anymore since there's an API in tilemap using
body ids instead.
Allows 2D character controller to work without applying gravity when
touching the ground (also more safely in 3D), and collision detection
is more flexible with different safe margin values.
Character body motion changes in 2D and 3D:
-Recovery only for depth > min contact depth to help with collision
detection consistency (rest info could be lost if recovery was too much)
-Adaptive min contact depth (based on margin) instead of space parameter
Extra CharacterBody changes:
-2D: apply changes made in 3D for stop on slope and floor snap that help
fixing some jittering cases
-3D: fix minor inconsistencies in stop on slope and floor snap logic
RigidDynamicBody modes are replaced with several properties to make their
usage clearer:
-lock_rotation: disable body's rotation (instead of MODE_LOCKED)
-freeze: no gravity or forces (instead of MODE_STATIC and MODE_KINEMATIC)
-freeze_mode: Static (can be only teleported) or Kinematic (can be animated)
Also renamed MODE_DYNAMIC_LOCKED to MODE_DYNAMIC_LINEAR in the physics
servers.
Changes:
-Added support for custom inertia and center of mass in 3D
-Added support for custom center of mass in 2D
-Calculated center of mass from shapes in 2D (same as in 3D)
-Fixed mass properties calculation with disabled shapes in 2D/3D
-Removed first_integration which is not used in 2D and doesn't seem to
make a lot of sense (prevents omit_force_integration to work during the
first frame)
-Support for custom inertia on different axes for RigidBody3D
Instead of having a physics node named Static that can be either Static
or Kinematic, AnimatableBody is added again as a separate node:
-Inherited from StaticBody to make its usage clearer
-Still separated from CharacterBody to make its usage more focused
Properly implemented constant velocity for kinematic bodies in godot
physics servers (induced velocity without actually moving).
Also updated description for the different physics nodes to make their
usage clearer.
The default mask for queries was 0, 0x7FFFFFFF or 0xFFFFFFFF depending
on the cases.
Now always using 0xFFFFFFFF (in the form of UINT32_MAX to make it clear)
in order to use all layers by default.
Use a C++ callback instead of Callable for synchronizing physics nodes' state with physics servers.
Remove usage of PhysicsDirectBodyState in physics nodes when not
necessary.
Store PhysicsDirectBodyState for bodies individually instead of a
singleton to avoid issues when accessing direct body state for multiple
bodies.
PhysicsDirectBodyState is initialized only when needed, so it doesn't
have to be created when using the physics server directly.
Move PhysicsDirectBodyState2D and PhysicsDirectBodyState3D to separate
cpp files.
Make separation ray shapes work properly in move_and_slide, wihtout the
specific code in CharacterBody like before.
Now most of the logic is handled inside the physics server. The only
thing that's needed is to use ray shapes only for recovery and ignore
them when performing the motion itself (unless we're snapping or slips
on slope is on).
One-way collision is disabled for both rigid bodies and character
bodies.
Kinematic margin is now applied to ray shapes to help getting consistent
results in slopes and flat surfaces.
Convex shapes don't return inverted normals when a segment test starts
inside (raycasting will be made consistent in a separate patch).
Ray shapes also discard contacts when fully contained inside a shape
and when the contact direction is inverted, so the behavior is
consistent with all shape types. Now they always separate only when
intersecting the top of a shape (for downward rays).
Removing the + 1 in point gravity formula when using distance scale to
make it more accurate for standard gravitation.
Fixes precession in orbits for games using gravitation.
Also moved gravity calculation to area to use it for both rigid bodies
and soft bodies in 3D (same change in 2D for consistency).
Co-authored-by: Ryan Peach <ryan.peach@keysight.com>
Changes:
- Rename few methods/property and group them in the editor when it's possible
- Make MotionResult API consistency with KinematicCollision
- Return a boolean in move_and_slide if there was a collision
- New methods:
- get_floor_angle on CharacterBody to get the floor angle.
- get_angle on KinematicCollision to get the collision angle.
- get_last_slide_collision to quickly get the latest collision of move_and_slide.
Infinite inertia:
Not needed anymore, since it's now possible to set one-directional
collision layers in order for characters to ignore rigid bodies, while
rigid bodies still collide with characters.
Ray shapes:
They were introduced as a work around to allow constant speed on slopes,
which is now possible with the new property in CharacterBody instead.
When synchronizing CharacterBody motion with moving the platform using
direct body state, only the linear velocity was taken into account.
This change exposes velocity at local point in direct body state and
uses it in move_and_slide to get the proper velocity that includes
rotations.
Check for each body individually if it collides with the other one or
ignores it.
When a body is being ignored, the other body's mass is considered
infinite when applying impulses to avoid extra overlapping.
Fixing by applying the movement in two steps, first the platform
movement, and then the body movement. Plus, add the platform movement
when we are on_wall.
More accurate unsafe motion calculation
* Safe and unsafe motion are calculated by dichotomy with a limited
number of steps. It's good for performance, but on long motions that
either collide near the beginning or near the end, the result can be
very imprecise.
* Now a factor 0.25 or 0.75 is used to converge faster when this case
happens, which allows longer motions to get more accurate collision
detection.
* Makes snap collision more precise, and helps with cases where diagonal collision on the border of a platform can lead to the character being stuck.
Additional improvements to move_and_slide:
* Handle slide canceling in move_and_collide with 0 velocity instead of
not applying it.
* Better handling of snap with custom logic to cancel sliding.
* Remove small jittering when using stop on slope, by canceling the
motion completely when the resulting motion is less than margin instead
of always projecting to the up direction (in both body motion and snap).
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
Make sure the direction of the motion is preserved, unless the depth is
higher than the margin, which means the body needs depenetration in any
direction.
Also changed move_and_slide to avoid sliding on the first motion, in
order to avoid issues with unstable position on ground when jumping.
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
In 3D, disabled shapes are now not added to the broadphase anymore.
Since they are removed right away when disabled, no need to check for
disabled shapes for any query that comes from the broadphase.
Also Fixes raycast queries returning disabled shapes.
In 2D, disabled shapes where already not added to the broadphase.
Remove the same unnecessary checks as in 3D.
Overall harmonized API for disabled shapes in the physics servers and
removed duplicate method.
* RingBuffer had no reason to be in this context
* A single buffer is used that can grow as much as the game needs.
This should make thread loading entirely reliable.
Safe margin property on CharacterBody only, used as argument in
move_and_collide.
Removed kinematic_safe_margin in 3D physics server, not really useful
and now harmonized with 2D.
MODE_DYNAMIC instead of MODE_RIGID
MODE_DYNAMIC_LOCKED instead of MODE_CHARACTER
No more special case for sleeping behavior for MODE_DYNAMIC_LOCKED
(MODE_CHARACTER was forcing the body not to sleep, which is redundant
with can_sleep and wasn't done in Bullet).
Port lawnjelly's dynamic BVH implementation from 3.x to be used in
both 2D and 3D broadphases.
Removed alternative broadphase implementations which are not meant to be
used anymore since they are much slower.
Includes changes in Rect2, Vector2, Vector3 that help with the template
implementation of the dynamic BVH by uniformizing the interface between
2D and 3D math.
Co-authored-by: lawnjelly <lawnjelly@gmail.com>
Use ThreadWorkPool to process physics step tasks in multiple threads. Collisions are all processed in parallel and solving impulses is
processed in parallel for rigid body islands.
Additional changes:
- Proper islands for soft bodies linked to active bodies
- All moving areas are on separate islands (can be parallelized)
- Fix inconsistencies with body islands (Kinematic bodies could link
bodies together or not depending on the processing order)
- Completely prevent static bodies to be active (it could cause islands
to be wrongly created and cause dangerous multi-threading operations as
well as inconsistencies in created islands)
- Apply impulses only on dynamic bodies to avoid unsafe multi-threaded
operations (static bodies can be on multiple islands)
- Removed inverted iterations when populating body islands, it's now
faster in regular order (maybe after fixing inconsistencies)
Several optimizations in the way solver islands are processed in both
2D and 3D physics:
- Use LocalVector instead of linked list to avoid cache misses (with
persistent storage based on worst case scenario)
- Remove pairs when setup fails (no valid contact) to avoid unnecessary
solving of non-colliding rigid bodies just to return immediately
In 3D, collision is disabled between kinematic/static bodies when
contacts are generated only to report them.
In 2D, this case was already fixed but the code is cleaned to make it
easier to follow.
- Based on C++11's `atomic`
- Reworked `SafeRefCount` (based on the rewrite by @hpvb)
- Replaced free atomic functions by the new `SafeNumeric<T>`
- Replaced wrong cases of `volatile bool` by the new `SafeFlag`
- Platform-specific implementations no longer needed
Co-authored-by: Hein-Pieter van Braam-Stewart <hp@tmm.cx>
This change makes test_body_motion more reliable when the kinematic body
recovers from being stuck.
- When recovery occurs, the rest information is generated, in order to
make sure collision results from test_move, move_and_collide and
move_and_slide are consistent and return a collision in case of overlap.
- The new calculation for recovery vector makes sure the recovery is
never more than the overlap depth between shapes.
This can help with cases where the kinematic body overlaps with several
shapes.
Recovery is made iteratively, without forcing a full overlap at each
step. This helps with getting proper rest information when recovery
occurs.
- One Way Collision:
When attempting motion, contact direction is checked against motion
before skipping in order to solve cases where kinematic bodies can sink
into one-way collision shapes.
Rest info now sets max contact depth in order to properly handle one-way
collision.
- Low speed motion is now handled in the rest info, by never setting
min_allowed_depth lower than motion length.
Separation is always applied with full margin, otherwise contact is lost
when low speed motion occurs right after higher speed motion.
- Similar changes are applied to 3D in order to make 2D and 3D
consistent.
-Rendering server now uses a split RID allocate/initialize internally, this allows generating RIDs immediately but initialization to happen later on the proper thread (as rendering APIs generally requiere to call on the right thread).
-RenderingServerWrapMT is no more, multithreading is done in RenderingServerDefault.
-Some functions like texture or mesh creation, when renderer supports it, can register and return immediately (so no waiting for server API to flush, and saving staging and command buffer memory).
-3D physics server changed to be made multithread friendly.
-Added PhysicsServer3DWrapMT to use 3D physics server from multiple threads.
-Disablet Bullet (too much effort to make multithread friendly, this needs to be fixed eventually).
This change allows collide_shape, intersect_shape, cast_motion and
rest_info in both 2D and 3D to ignore disabled shapes and make them
consistent with the physics simulation.
In some other cases, _cull_aabb_for_body is used and filters shapes out
internally, but whenever a physics query uses the broadphase directly
without calling _cull_aabb_for_body, disabled shapes can be returned
and need to be filtered out.
- Based on C++11's `thread` and `thread_local`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed (except for the few cases of non-portable functions)
- Simpler for `NO_THREADS`
- Thread ids are now the same across platforms (main is 1; others follow)
For RigidBodies, uses the collision normal determined by relative motion
to determine whether or not a one-way collision has occurred.
For KinematicBodies, performs additional checks to ensure a one-way
collision has occurred, and averages the recovery step over all collision
shapes.
Co-authored-by: Sergej Gureev <sergej.gureev@relex.fi>
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
- Fixes Godot physics failing when the cast Shape is inside of, or
already colliding with another Shape.
- Fixes Bullet physics failing when there is no motion.
- Ensures Godot and Bullet physics behave the same.
- Updates the documentation to exclude the caveats for the failures and
differences.
The thread model option for physics (2D) and rendering (single-unsafe,
single-safe, multithread), was causing crashes/locks when set as
multithreaded and exported for a platform that does not support threads
(namely HTML5).
This commit ensures that when threads support is not available, that
option is ignored, and the equivalent of "single-unsafe" is always used
instead.
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
Part of #33027, also discussed in #29848.
Enforcing the use of brackets even on single line statements would be
preferred, but `clang-format` doesn't have this functionality yet.
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
EngineDebugger is the new interface to access the debugger.
It tries to be as agnostic as possible on the data that various
subsystems can expose.
It allows 2 types of interactions:
- Profilers:
A subsystem can register a profiler, assigning it a unique name.
That name can be used to activate the profiler or add data to it.
The registered profiler can be composed of up to 3 functions:
- Toggle: called when the profiler is activated/deactivated.
- Add: called whenever data is added to the debugger
(via `EngineDebugger::profiler_add_frame_data`)
- Tick: called every frame (during idle), receives frame times.
- Captures: (Only relevant in remote debugger for now)
A subsystem can register a capture, assigning it a unique name.
When receiving a message, the remote debugger will check if it starts
with `[prefix]:` and call the associated capture with name `prefix`.
Port MultiplayerAPI, Servers, Scripts, Visual, Performance to the new
profiler system.
Port SceneDebugger and RemoteDebugger to the new capture system.
The LocalDebugger also uses the new profiler system for scripts
profiling.
- Removed platform-specific implementations.
- Now all semaphores are in-object, unless they need to be conditionally created.
- Similarly to `Mutex`, provided a dummy implementation for when `NO_THREADS` is defined.
- Similarly to `Mutex`, methods are made `const` for easy use in such contexts.
- Language bindings updated: `wait()` and `post()` are now `void`.
- Language bindings updated: `try_wait()` added.
Bonus:
- Rewritten the `#ifdef` in `mutex.h` to meet the code style.
Main:
- It's now implemented thanks to `<mutex>`. No more platform-specific implementations.
- `BinaryMutex` (non-recursive) is added, as an alternative for special cases.
- Doesn't need allocation/deallocation anymore. It can live in the stack and be part of other classes.
- Because of that, it's methods are now `const` and the inner mutex is `mutable` so it can be easily used in `const` contexts.
- A no-op implementation is provided if `NO_THREADS` is defined. No more need to add `#ifdef NO_THREADS` just for this.
- `MutexLock` now takes a reference. At this point the cases of null `Mutex`es are rare. If you ever need that, just don't use `MutexLock`.
- Thread-safe utilities are therefore simpler now.
Misc.:
- `ScopedMutexLock` is dropped and replaced by `MutexLock`, because they were pretty much the same.
- Every case of lock, do-something, unlock is replaced by `MutexLock` (complex cases where it's not straightfoward are kept as as explicit lock and unlock).
- `ShaderRD` contained an `std::mutex`, which has been replaced by `Mutex`.
- Renames PackedIntArray to PackedInt32Array.
- Renames PackedFloatArray to PackedFloat32Array.
- Adds PackedInt64Array and PackedFloat64Array.
- Renames Variant::REAL to Variant::FLOAT for consistency.
Packed arrays are for storing large amount of data and creating stuff like
meshes, buffers. textures, etc. Forcing them to be 64 is a huge waste of
memory. That said, many users requested the ability to have 64 bits packed
arrays for their games, so this is just an optional added type.
For Variant, the float datatype is always 64 bits, and exposed as `float`.
We still have `real_t` which is the datatype that can change from 32 to 64
bits depending on a compile flag (not entirely working right now, but that's
the idea). It affects math related datatypes and code only.
Neither Variant nor PackedArray make use of real_t, which is only intended
for math precision, so the term is removed from there to keep only float.
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
For clarity, assign-to-release idiom for PoolVector::Read/Write
replaced with a function call.
Existing uses replaced (or removed if already handled by scope)
