Contains global variables accessible from everywhere. Use [method get_setting], [method set_setting] or [method has_setting] to access them. Variables stored in [code]project.godot[/code] are also loaded into ProjectSettings, making this object very useful for reading custom game configuration options.
When naming a Project Settings property, use the full path to the setting including the category. For example, [code]"application/config/name"[/code] for the project name. Category and property names can be viewed in the Project Settings dialog.
[b]Overriding:[/b] Any project setting can be overridden by creating a file named [code]override.cfg[/code] in the project's root directory. This can also be used in exported projects by placing this file in the same directory as the project binary.
Loads the contents of the .pck or .zip file specified by [code]pack[/code] into the resource filesystem ([code]res://[/code]). Returns [code]true[/code] on success.
[b]Note:[/b] If a file from [code]pack[/code] shares the same path as a file already in the resource filesystem, any attempts to load that file will use the file from [code]pack[/code] unless [code]replace_files[/code] is set to [code]false[/code].
[b]Note:[/b] The optional [code]offset[/code] parameter can be used to specify the offset in bytes to the start of the resource pack. This is only supported for .pck files.
Saves the configuration to a custom file. The file extension must be [code].godot[/code] (to save in text-based [ConfigFile] format) or [code].binary[/code] (to save in binary format).
Comma-separated list of custom Android modules (which must have been built in the Android export templates) using their Java package path, e.g. [code]"org/godotengine/godot/MyCustomSingleton,com/example/foo/FrenchFriesFactory"[/code].
[b]Note:[/b] Since Godot 3.2.2, the [code]org/godotengine/godot/GodotPaymentV3[/code] module was deprecated and replaced by the [code]GodotPayment[/code] plugin which should be enabled in the Android export preset under [code]Plugins[/code] section. The singleton to access in code was also renamed to [code]GodotPayment[/code].
If [code]true[/code], scale the boot splash image to the full window length when engine starts. If [code]false[/code], the engine will leave it at the default pixel size.
If [code]true[/code], applies linear filtering when scaling the image (recommended for high resolution artwork). If [code]false[/code], uses nearest-neighbor interpolation (recommended for pixel art).
This user directory is used for storing persistent data ([code]user://[/code] filesystem). If left empty, [code]user://[/code] resolves to a project-specific folder in Godot's own configuration folder (see [method OS.get_user_data_dir]). If a custom directory name is defined, this name will be used instead and appended to the system-specific user data directory (same parent folder as the Godot configuration folder documented in [method OS.get_user_data_dir]).
Icon set in [code].icns[/code] format used on macOS to set the game's icon. This is done automatically on start by calling [method OS.set_native_icon].
The project's name. It is used both by the Project Manager and by exporters. The project name can be translated by translating its value in localization files. The window title will be set to match the project name automatically on startup.
[b]Note:[/b] Changing this value will also change the user data folder's path if [member application/config/use_custom_user_dir] is [code]false[/code]. After renaming the project, you will no longer be able to access existing data in [code]user://[/code] unless you rename the old folder to match the new project name. See [url=https://docs.godotengine.org/en/3.2/tutorials/io/data_paths.html]Data paths[/url] in the documentation for more information.
[b]Note:[/b] Regardless of this setting's value, [code]res://override.cfg[/code] will still be read to override the project settings (see this class' description at the top).
If [code]true[/code], the project will save user data to its own user directory (see [member application/config/custom_user_dir_name]). This setting is only effective on desktop platforms. A name must be set in the [member application/config/custom_user_dir_name] setting for this to take effect. If [code]false[/code], the project will save user data to [code](OS user data directory)/Godot/app_userdata/(project name)[/code].
Icon set in [code].ico[/code] format used on Windows to set the game's icon. This is done automatically on start by calling [method OS.set_native_icon].
If [code]true[/code], enables low-processor usage mode. This setting only works on desktop platforms. The screen is not redrawn if nothing changes visually. This is meant for writing applications and editors, but is pretty useless (and can hurt performance) in most games.
Audio buses will disable automatically when sound goes below a given dB threshold for a given time. This saves CPU as effects assigned to that bus will no longer do any processing.
Audio buses will disable automatically when sound goes below a given dB threshold for a given time. This saves CPU as effects assigned to that bus will no longer do any processing.
Specifies the audio driver to use. This setting is platform-dependent as each platform supports different audio drivers. If left empty, the default audio driver will be used.
Output latency in milliseconds for audio. Lower values will result in lower audio latency at the cost of increased CPU usage. Low values may result in audible cracking on slower hardware.
The default compression level for gzip. Affects compressed scenes and resources. Higher levels result in smaller files at the cost of compression speed. Decompression speed is mostly unaffected by the compression level. [code]-1[/code] uses the default gzip compression level, which is identical to [code]6[/code] but could change in the future due to underlying zlib updates.
The default compression level for Zlib. Affects compressed scenes and resources. Higher levels result in smaller files at the cost of compression speed. Decompression speed is mostly unaffected by the compression level. [code]-1[/code] uses the default gzip compression level, which is identical to [code]6[/code] but could change in the future due to underlying zlib updates.
The default compression level for Zstandard. Affects compressed scenes and resources. Higher levels result in smaller files at the cost of compression speed. Decompression speed is mostly unaffected by the compression level.
Largest size limit (in power of 2) allowed when compressing using long-distance matching with Zstandard. Higher values can result in better compression, but will require more memory when compressing and decompressing.
If [code]true[/code], displays getters and setters in autocompletion results in the script editor. This setting is meant to be used when porting old projects (Godot 2), as using member variables is the preferred style from Godot 3 onwards.
If [code]true[/code], enables specific GDScript warnings (see [code]debug/gdscript/warnings/*[/code] settings). If [code]false[/code], disables all GDScript warnings.
If [code]true[/code], enables warnings when a function is declared with the same name as a variable. This will turn into an error in a future version when first-class functions become supported in GDScript.
If [code]true[/code], enables warnings when passing a floating-point value to a function that expects an integer (it will be converted and lose precision).
If [code]true[/code], enables warnings when calling a function without using its return value (by assigning it to a variable or using it as a function argument). Such return values are sometimes used to denote possible errors using the [enum Error] enum.
If [code]true[/code], enables warnings when defining a local or subclass member variable that would shadow a variable at an upper level (such as a member variable).
If [code]true[/code], enables warnings when calling an expression that has no effect on the surrounding code, such as writing [code]2 + 2[/code] as a statement.
If [code]true[/code], enables warnings when calling a ternary expression that has no effect on the surrounding code, such as writing [code]42 if active else 0[/code] as a statement.
If [code]true[/code], enables warnings when assigning a variable using an assignment operator like [code]+=[/code] if the variable wasn't previously assigned.
If [code]true[/code], enables warnings when a variable is declared with the same name as a function. This will turn into an error in a future version when first-class functions become supported in GDScript.
<membername="debug/settings/crash_handler/message"type="String"setter=""getter=""default=""Please include this when reporting the bug on https://github.com/godotengine/godot/issues"">
Maximum number of frames per second allowed. The actual number of frames per second may still be below this value if the game is lagging.
If [member display/window/vsync/use_vsync] is enabled, it takes precedence and the forced FPS number cannot exceed the monitor's refresh rate.
This setting is therefore mostly relevant for lowering the maximum FPS below VSync, e.g. to perform non real-time rendering of static frames, or test the project under lag conditions.
Print more information to standard output when running. It displays information such as memory leaks, which scenes and resources are being loaded, etc.
If [code]true[/code], allows HiDPI display on Windows and macOS. This setting has no effect on desktop Linux, as DPI-awareness fallbacks are not supported there.
If [code]true[/code], allows per-pixel transparency in a desktop window. This affects performance, so leave it on [code]false[/code] unless you need it.
Sets the main window to full screen when the project starts. Note that this is not [i]exclusive[/i] fullscreen. On Windows and Linux, a borderless window is used to emulate fullscreen. On macOS, a new desktop is used to display the running project.
Regardless of the platform, enabling fullscreen will change the window size to match the monitor's size. Therefore, make sure your project supports [url=https://docs.godotengine.org/en/latest/tutorials/rendering/multiple_resolutions.html]multiple resolutions[/url] when enabling fullscreen mode.
[b]Note:[/b] This setting is ignored on iOS, Android, and HTML5.
Sets the game's main viewport height. On desktop platforms, this is the default window size. Stretch mode settings also use this as a reference when enabled.
Sets the game's main viewport width. On desktop platforms, this is the default window size. Stretch mode settings also use this as a reference when enabled.
If [code]true[/code], enables vertical synchronization. This eliminates tearing that may appear in moving scenes, at the cost of higher input latency and stuttering at lower framerates. If [code]false[/code], vertical synchronization will be disabled, however, many platforms will enforce it regardless (such as mobile platforms and HTML5).
If [code]Use Vsync[/code] is enabled and this setting is [code]true[/code], enables vertical synchronization via the operating system's window compositor when in windowed mode and the compositor is enabled. This will prevent stutter in certain situations. (Windows only.)
[b]Note:[/b] This option is experimental and meant to alleviate stutter experienced by some users. However, some users have experienced a Vsync framerate halving (e.g. from 60 FPS to 30 FPS) when using it.
Search path for project-specific script templates. Godot will search for script templates both in the editor-specific path and in this project-specific path.
Text-based file extensions to include in the script editor's "Find in Files" feature. You can add e.g. [code]tscn[/code] if you wish to also parse your scene files, especially if you use built-in scripts which are serialized in the scene files.
Default [InputEventAction] to confirm a focused button, menu or list item, or validate input.
[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified.
Default [InputEventAction] to discard a modal or pending input.
[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified.
Default [InputEventAction] to move down in the UI.
[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified.
Default [InputEventAction] to go to the end position of a [Control] (e.g. last item in an [ItemList] or a [Tree]), matching the behavior of [constant KEY_END] on typical desktop UI systems.
[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified.
Default [InputEventAction] to focus the next [Control] in the scene. The focus behavior can be configured via [member Control.focus_next].
[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified.
Default [InputEventAction] to focus the previous [Control] in the scene. The focus behavior can be configured via [member Control.focus_previous].
[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified.
Default [InputEventAction] to go to the start position of a [Control] (e.g. first item in an [ItemList] or a [Tree]), matching the behavior of [constant KEY_HOME] on typical desktop UI systems.
[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified.
Default [InputEventAction] to move left in the UI.
[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified.
Default [InputEventAction] to go down a page in a [Control] (e.g. in an [ItemList] or a [Tree]), matching the behavior of [constant KEY_PAGEDOWN] on typical desktop UI systems.
[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified.
Default [InputEventAction] to go up a page in a [Control] (e.g. in an [ItemList] or a [Tree]), matching the behavior of [constant KEY_PAGEUP] on typical desktop UI systems.
[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified.
Default [InputEventAction] to move right in the UI.
[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified.
Default [InputEventAction] to select an item in a [Control] (e.g. in an [ItemList] or a [Tree]).
[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified.
[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified.
This is used by servers when used in multi-threading mode (servers and visual). RIDs are preallocated to avoid stalling the server requesting them on threads. If servers get stalled too often when loading resources in a thread, increase this number.
Maximum amount of characters allowed to send as output from the debugger. Over this value, content is dropped. This helps not to stall the debugger connection.
Maximum number of errors allowed to be sent as output from the debugger. Over this value, content is dropped. This helps not to stall the debugger connection.
Maximum amount of messages allowed to send as output from the debugger. Over this value, content is dropped. This helps not to stall the debugger connection.
Maximum number of warnings allowed to be sent as output from the debugger. Over this value, content is dropped. This helps not to stall the debugger connection.
The CA certificates bundle to use for SSL connections. If this is set to a non-empty value, this will [i]override[/i] Godot's default [url=https://github.com/godotengine/godot/blob/master/thirdparty/certs/ca-certificates.crt]Mozilla certificate bundle[/url]. If left empty, the default certificate bundle will be used.
[b]Note:[/b] Good values are in the range [code]0[/code] to [code]1[/code]. At value [code]0[/code] objects will keep moving with the same velocity. Values greater than [code]1[/code] will aim to reduce the velocity to [code]0[/code] in less than a second e.g. a value of [code]2[/code] will aim to reduce the velocity to [code]0[/code] in half a second. A value equal to or greater than the physics frame rate ([member ProjectSettings.physics/common/physics_fps], [code]60[/code] by default) will bring the object to a stop in one iteration.
[b]Note:[/b] Good values are in the range [code]0[/code] to [code]1[/code]. At value [code]0[/code] objects will keep moving with the same velocity. Values greater than [code]1[/code] will aim to reduce the velocity to [code]0[/code] in less than a second e.g. a value of [code]2[/code] will aim to reduce the velocity to [code]0[/code] in half a second. A value equal to or greater than the physics frame rate ([member ProjectSettings.physics/common/physics_fps], [code]60[/code] by default) will bring the object to a stop in one iteration.
Threshold angular velocity under which a 2D physics body will be considered inactive. See [constant Physics2DServer.SPACE_PARAM_BODY_ANGULAR_VELOCITY_SLEEP_THRESHOLD].
Threshold linear velocity under which a 2D physics body will be considered inactive. See [constant Physics2DServer.SPACE_PARAM_BODY_LINEAR_VELOCITY_SLEEP_THRESHOLD].
Sets whether physics is run on the main thread or a separate one. Running the server on a thread increases performance, but restricts API access to only physics process.
[b]Warning:[/b] As of Godot 3.2, there are mixed reports about the use of a Multi-Threaded thread model for physics. Be sure to assess whether it does give you extra performance and no regressions when using it.
[b]Note:[/b] Good values are in the range [code]0[/code] to [code]1[/code]. At value [code]0[/code] objects will keep moving with the same velocity. Values greater than [code]1[/code] will aim to reduce the velocity to [code]0[/code] in less than a second e.g. a value of [code]2[/code] will aim to reduce the velocity to [code]0[/code] in half a second. A value equal to or greater than the physics frame rate ([member ProjectSettings.physics/common/physics_fps], [code]60[/code] by default) will bring the object to a stop in one iteration.
[b]Note:[/b] Good values are in the range [code]0[/code] to [code]1[/code]. At value [code]0[/code] objects will keep moving with the same velocity. Values greater than [code]1[/code] will aim to reduce the velocity to [code]0[/code] in less than a second e.g. a value of [code]2[/code] will aim to reduce the velocity to [code]0[/code] in half a second. A value equal to or greater than the physics frame rate ([member ProjectSettings.physics/common/physics_fps], [code]60[/code] by default) will bring the object to a stop in one iteration.
The number of fixed iterations per second. This controls how often physics simulation and [method Node._physics_process] methods are run.
[b]Note:[/b] This property is only read when the project starts. To change the physics FPS at runtime, set [member Engine.iterations_per_second] instead.
[b]Experimental[/b] For regression testing against the old renderer. If this is switched on, and [code]use_batching[/code] is set, the renderer will swap alternately between using the old renderer, and the batched renderer, on each frame. This makes it easy to identify visual differences. Performance will be degraded.
Lights have the potential to prevent joining items, and break many of the performance benefits of batching. This setting enables some complex logic to allow joining items if their lighting is similar, and overlap tests pass. This can significantly improve performance in some games. Set to 0 to switch off. With large values the cost of overlap tests may lead to diminishing returns.
Sets the proportion of the total screen area (in pixels) that must be saved by a scissor operation in order to activate light scissoring. This can prevent parts of items being rendered outside the light area. Lower values scissor more aggressively. A value of 1 scissors none of the items, a value of 0 scissors every item. The power of 4 of the value is used, in order to emphasize the lower range, and multiplied by the total screen area in pixels to give the threshold. This can reduce fill rate requirements in scenes with a lot of lighting.
Enabling this setting uses the legacy method to draw batches containing only one rect. The legacy method is faster (approx twice as fast), but can cause flicker on some systems. In order to directly compare performance with the non-batching renderer you can set this to true, but it is recommended to turn this off unless you can guarantee your target hardware will work with this method.
Size of buffer reserved for batched vertices. Larger size enables larger batches, but there are diminishing returns for the memory used. This should only have a minor effect on performance.
Including color in the vertex format has a cost, however, not including color prevents batching across color changes. This threshold determines the ratio of [code]number of vertex color changes / total number of vertices[/code] above which vertices will be translated to colored format. A value of 0 will always use colored vertices, 1 will never use colored vertices.
In certain circumstances, the batcher can reorder items in order to better join them. This may result in better performance. An overlap test is needed however for each item lookahead, so there is a trade off, with diminishing returns. If you are getting no benefit, setting this to 0 will switch it off.
Sets the number of commands to lookahead to determine whether to batch render items. A value of 1 can join items consisting of single commands, 0 turns off joining. Higher values are in theory more likely to join, however this has diminishing returns and has a runtime cost so a small value is recommended.
On some platforms (especially mobile), precision issues in shaders can lead to reading 1 texel outside of bounds, particularly where rects are scaled. This can particularly lead to border artifacts around tiles in tilemaps.
This adjustment corrects for this by making a small contraction to the UV coordinates used. Note that this can result in a slight squashing of border texels.
The amount of UV contraction. This figure is divided by 1000000, and is a proportion of the total texture dimensions, where the width and height are both ranged from 0.0 to 1.0.
Use the default unless correcting for a problem on particular hardware.
Default background clear color. Overridable per [Viewport] using its [Environment]. See [member Environment.background_mode] and [member Environment.background_color] in particular. To change this default color programmatically, use [method VisualServer.set_default_clear_color].
[Environment] that will be used as a fallback environment in case a scene does not specify its own environment. The default environment is loaded in at scene load time regardless of whether you have set an environment or not. If you do not rely on the fallback environment, it is best to delete [code]default_env.tres[/code], or to specify a different default environment here.
The use of half-float vertex compression may be producing rendering errors on some platforms (especially iOS). These have been seen particularly in particles. Disabling half-float may resolve these problems.
Max amount of elements renderable in a frame. If more than this are visible per frame, they will be dropped. Keep in mind elements refer to mesh surfaces and not meshes themselves.
Max number of lights renderable in a frame. If more than this number are used, they will be ignored. On some systems (particularly web) setting this number as low as possible can increase the speed of shader compilation.
Max number of reflection probes renderable in a frame. If more than this number are used, they will be ignored. On some systems (particularly web) setting this number as low as possible can increase the speed of shader compilation.
Shaders have a time variable that constantly increases. At some point, it needs to be rolled back to zero to avoid precision errors on shader animations. This setting specifies when (in seconds).
Some NVIDIA GPU drivers have a bug which produces flickering issues for the [code]draw_rect[/code] method, especially as used in [TileMap]. Refer to [url=https://github.com/godotengine/godot/issues/9913]GitHub issue 9913[/url] for details.
If [code]true[/code], this option enables a "safe" code path for such NVIDIA GPUs at the cost of performance. This option affects GLES2 and GLES3 rendering, but only on desktop platforms.
If [code]true[/code], performs 2d skinning on the CPU rather than the GPU. This provides greater compatibility with a wide range of hardware, and also may be faster in some circumstances.
Currently only available when [member rendering/batching/options/use_batching] is active.
If [code]true[/code], performs a previous depth pass before rendering materials. This increases performance in scenes with high overdraw, when complex materials and lighting are used.
The directional shadow's size in pixels. Higher values will result in sharper shadows, at the cost of performance. The value will be rounded up to the nearest power of 2.
[b]Note:[/b] The backend in use can be overridden at runtime via the [code]--video-driver[/code] command line argument, or by the [member rendering/quality/driver/fallback_to_gles2] option if the target system does not support GLES3 and falls back to GLES2. In such cases, this property is not updated, so use [method OS.get_current_video_driver] to query it at run-time.
[b]Note:[/b] The two video drivers are not drop-in replacements for each other, so a game designed for GLES3 might not work properly when falling back to GLES2. In particular, some features of the GLES3 backend are not available in GLES2. Enabling this setting also means that both ETC and ETC2 VRAM-compressed textures will be exported on Android and iOS, increasing the data pack's size.
Maximum anisotropic filter level used for textures with anisotropy enabled. Higher values will result in sharper textures when viewed from oblique angles, at the cost of performance. Only power-of-two values are valid (2, 4, 8, 16).
Sets the number of MSAA samples to use. MSAA is used to reduce aliasing around the edges of polygons. A higher MSAA value results in smoother edges but can be significantly slower on some hardware.
[b]Note:[/b] MSAA is not available on HTML5 export using the GLES2 backend.
If [code]true[/code], uses a fast post-processing filter to make banding significantly less visible. In some cases, debanding may introduce a slightly noticeable dithering pattern. It's recommended to enable debanding only when actually needed since the dithering pattern will make lossless-compressed screenshots larger.
[b]Note:[/b] Only available on the GLES3 backend. [member rendering/quality/depth/hdr] must also be [code]true[/code] for debanding to be effective.
Enables FXAA in the root Viewport. FXAA is a popular screen-space antialiasing method, which is fast but will make the image look blurry, especially at lower resolutions. It can still work relatively well at large resolutions such as 1440p and 4K.
If [code]true[/code], uses nearest-neighbor mipmap filtering when using mipmaps (also called "bilinear filtering"), which will result in visible seams appearing between mipmap stages. This may increase performance in mobile as less memory bandwidth is used. If [code]false[/code], linear mipmap filtering (also called "trilinear filtering") is used.
Strategy used for framebuffer allocation. The simpler it is, the less resources it uses (but the less features it supports). If set to "2D Without Sampling" or "3D Without Effects", sample buffers will not be allocated. This means [code]SCREEN_TEXTURE[/code] and [code]DEPTH_TEXTURE[/code] will not be available in shaders and post-processing effects will not be available in the [Environment].
Lower-end override for [member rendering/quality/intended_usage/framebuffer_allocation] on mobile devices, due to performance concerns or driver support.
Size of the atlas used by reflection probes. A larger size can result in higher visual quality, while a smaller size will be faster and take up less memory.
If [code]true[/code], uses a high amount of samples to create blurred variants of reflection probes and panorama backgrounds (sky). Those blurred variants are used by rough materials.
Limits the size of the irradiance map which is normally determined by [member Sky.radiance_size]. A higher size results in a higher quality irradiance map similarly to [member rendering/quality/reflections/high_quality_ggx]. Use a higher value when using high-frequency HDRI maps, otherwise keep this as low as possible.
[b]Note:[/b] Low and mid range hardware do not support complex irradiance maps well and may crash if this is set too high.
If [code]true[/code], uses texture arrays instead of mipmaps for reflection probes and panorama backgrounds (sky). This reduces jitter noise on reflections, but costs more performance and memory.
Lower-end override for [member rendering/quality/reflections/texture_array_reflections] on mobile devices, due to performance concerns or driver support.
If [code]true[/code], forces vertex shading for all rendering. This can increase performance a lot, but also reduces quality immensely. Can be used to optimize performance on low-end mobile devices.
Shadow filter mode. Higher-quality settings result in smoother shadows that flicker less when moving. "Disabled" is the fastest option, but also has the lowest quality. "PCF5" is smoother but is also slower. "PCF13" is the smoothest option, but is also the slowest.
Allows [MeshInstance] to perform skinning on the CPU when the hardware doesn't support the default GPU skinning process with GLES2.
If [code]false[/code], an alternative skinning process on the GPU is used in this case (slower in most cases).
See also [member rendering/quality/skinning/force_software_skinning].
[b]Note:[/b] When the software skinning fallback is triggered, custom vertex shaders will behave in a different way, because the bone transform will be already applied to the modelview matrix.
If [code]true[/code], the texture importer will import VRAM-compressed textures using the BPTC algorithm. This texture compression algorithm is only supported on desktop platforms, and only when using the GLES3 renderer.
If [code]true[/code], the texture importer will import VRAM-compressed textures using the Ericsson Texture Compression algorithm. This algorithm doesn't support alpha channels in textures.
If [code]true[/code], the texture importer will import VRAM-compressed textures using the Ericsson Texture Compression 2 algorithm. This texture compression algorithm is only supported when using the GLES3 renderer.
If [code]true[/code], the texture importer will import VRAM-compressed textures using the PowerVR Texture Compression algorithm. This texture compression algorithm is only supported on iOS.
If [code]true[/code], the texture importer will import VRAM-compressed textures using the S3 Texture Compression algorithm. This algorithm is only supported on desktop platforms and consoles.
