nanosleep returns 0 or -1 not the error code.
The error code "EINTR" (if encountered) is placed in errno, in which case nanosleep can be safely recalled with the remaining time.
This is required, so that nanosleep continues if the calling thread is interrupted by a signal.
See manpage nanosleep(2) for additional details.
Add __NetBSD__ to `platform_config.h` so that it can find `alloca`
and use the proper `pthread_setname_np` format.
Rename RANDOM_MAX to avoid conflict with NetBSD stdlib.
Fixes#42145.
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
Using `clang-tidy`'s `modernize-use-default-member-init` check and
manual review of the changes, and some extra manual changes that
`clang-tidy` failed to do.
Also went manually through all of `core` to find occurrences that
`clang-tidy` couldn't handle, especially all initializations done
in a constructor without using initializer lists.
Part of #33027, also discussed in #29848.
Enforcing the use of brackets even on single line statements would be
preferred, but `clang-format` doesn't have this functionality yet.
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
EngineDebugger is the new interface to access the debugger.
It tries to be as agnostic as possible on the data that various
subsystems can expose.
It allows 2 types of interactions:
- Profilers:
A subsystem can register a profiler, assigning it a unique name.
That name can be used to activate the profiler or add data to it.
The registered profiler can be composed of up to 3 functions:
- Toggle: called when the profiler is activated/deactivated.
- Add: called whenever data is added to the debugger
(via `EngineDebugger::profiler_add_frame_data`)
- Tick: called every frame (during idle), receives frame times.
- Captures: (Only relevant in remote debugger for now)
A subsystem can register a capture, assigning it a unique name.
When receiving a message, the remote debugger will check if it starts
with `[prefix]:` and call the associated capture with name `prefix`.
Port MultiplayerAPI, Servers, Scripts, Visual, Performance to the new
profiler system.
Port SceneDebugger and RemoteDebugger to the new capture system.
The LocalDebugger also uses the new profiler system for scripts
profiling.
- Removed platform-specific implementations.
- Now all semaphores are in-object, unless they need to be conditionally created.
- Similarly to `Mutex`, provided a dummy implementation for when `NO_THREADS` is defined.
- Similarly to `Mutex`, methods are made `const` for easy use in such contexts.
- Language bindings updated: `wait()` and `post()` are now `void`.
- Language bindings updated: `try_wait()` added.
Bonus:
- Rewritten the `#ifdef` in `mutex.h` to meet the code style.
Namely, move the drive dropdown to just the left of the path text box and don't include the former
in the latter.
This improves the UX on Windows.
In the UNIX case, since its concept of drives is (ab)used to provide shortcuts to useful paths, its
dropdown is kept at the original location.
Main:
- It's now implemented thanks to `<mutex>`. No more platform-specific implementations.
- `BinaryMutex` (non-recursive) is added, as an alternative for special cases.
- Doesn't need allocation/deallocation anymore. It can live in the stack and be part of other classes.
- Because of that, it's methods are now `const` and the inner mutex is `mutable` so it can be easily used in `const` contexts.
- A no-op implementation is provided if `NO_THREADS` is defined. No more need to add `#ifdef NO_THREADS` just for this.
- `MutexLock` now takes a reference. At this point the cases of null `Mutex`es are rare. If you ever need that, just don't use `MutexLock`.
- Thread-safe utilities are therefore simpler now.
Misc.:
- `ScopedMutexLock` is dropped and replaced by `MutexLock`, because they were pretty much the same.
- Every case of lock, do-something, unlock is replaced by `MutexLock` (complex cases where it's not straightfoward are kept as as explicit lock and unlock).
- `ShaderRD` contained an `std::mutex`, which has been replaced by `Mutex`.
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
The misterious windows networking stack...
Using connect instead of WSAConnect causes socket error 10022 under
certain conditions.
See: https://github.com/godotengine/webrtc-native/ (issue 6)
Having to guess, code path for connect is different then WSAConnect with
NULL extra parameters.
The only reference about weird error with this code mentions something
called "Windows Filtering Platform" but windows internals are, as
always, obscure.
This might be something to try and report to Microsoft if anyone has the
time to spare with the likely outcome of being ignored.
On Unix systems, file descriptors are usually shared among child
processes.
This means, that if we spawn a subprocess (or we fork) like we do in
the editor any open file descriptor will leak to the new process.
This PR sets the close-on-exec flag when opening a file, which causes
the file descriptor to not be shared with the child process.
On Unix systems, sockets are like file descriptors, and file descriptors
are usually shared among child processes.
This means, that if we spawn a subprocess (or we fork) like we do in the
editor, open file descriptors will leak to the new process.
This causes issue with sockets as they might remain open and bound
(listening) when the original process closes.
Fixes this error:
```
drivers\unix\ip_unix.cpp(155): error C2593: 'operator =' is ambiguous
.\core/ustring.h(177): note: could be 'void String::operator =(const CharType *)'
.\core/ustring.h(176): note: or 'void String::operator =(const char *)'
drivers\unix\ip_unix.cpp(155): note: while trying to match the argument list '(String, int)'
```
Condensed some if and ERR statements. Added dots to end of error messages
Couldn't figure out EXPLAINC. These files gave me trouble: core/error_macros.h, core/io/file_access_buffered_fa.h (where is it?),
core/os/memory.cpp,
drivers/png/png_driver_common.cpp,
drivers/xaudio2/audio_driver_xaudio2.cpp (where is it?)
On some file systems, like ext4 on Linux, readdir() gives enough
information to determine the entry type in order to avoid doing
a stat() system call.
Use this information and call stat() only if necessary: for file
systems that do not support this feature and for links.
On some file systems, like ext4 on Linux, readdir() gives enough
information to determine the entry type in order to avoid doing
a stat() system call.
Use this information and call stat() only if necessary.
Allow getting interfaces names and assigned names.
On UWP this is not supported, and the function will return one interface
for each local address (with interface name the local address itself).
Warnings raised by Emscripten 1.38.0 and MinGW64 5.0.4 / GCC 8.3.0.
JS can now build with `werror=yes warnings=extra`.
MinGW64 still has a few warnings to resolve with `warnings=extra`,
and only one with `warnings=all`.
Part of #29033 and #29801.
- The `cpu-features.{c,h}` code was only used by chance by the webm
(libvpx) code, so I moved it there. It was actually introduced before
that and wasn't in use, and libvpx just happened to be able to
compile thanks to it being bundled.
It could potentially be compiled on the fly from the Android NDK, but
since we plan to replace the webm module by a GDNative plugin in the
near future, I went the bundling route.
- `ifaddrs_android.h` is already provided in the Android NDK as
`ifaddrs.h`, same as on other Unixes. Yet we cannot use it until we
up the min API level to 24, where `getifaddrs` is first defined.
I moved the files to `thirdparty/misc` and synced them with upstream
WebRTC (only indentation changes and removal of `static` qualifiers).
Also removes dropped thirdparty files from COPYRIGHT.txt after changes
in #24105 and #24145.
Fixes the following GCC 5 warnings and actual bugs:
```
drivers/unix/net_socket_posix.cpp:562:28: warning: comparison between 'enum IP::Type' and 'enum NetSocket::Type' [-Wenum-compare]
modules/gdscript/gdscript_function.cpp:792:26: warning: comparison of constant '17' with boolean expression is always true [-Wbool-compare]
modules/gdscript/gdscript_function.cpp:792:26: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
modules/gdscript/gdscript_parser.cpp:5082:58: warning: comparison of constant '6' with boolean expression is always false [-Wbool-compare]
modules/gdscript/gdscript_parser.cpp:5082:58: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
modules/mbedtls/stream_peer_mbed_tls.cpp:286:45: warning: comparison between 'enum StreamPeerTCP::Status' and 'enum StreamPeerSSL::Status' [-Wenum-compare]
modules/mbedtls/stream_peer_mbed_tls.cpp:313:45: warning: comparison between 'enum StreamPeerTCP::Status' and 'enum StreamPeerSSL::Status' [-Wenum-compare]
```
Since Windows 2000:
Calling recv/recvfrom when an ICMP reply was received from a previous
send/sendto, may result in a WSAECONNRESET error.
Since Windows Vista(?)/Windows Server 2008:
Calling recv/recvfrom when an ICMP reply was received from a previous
send/sendto, may also result in a WSAENETRESET error.
Both those features are disabled by this commit using disabling
SIO_UDP_CONNRESET and SIO_UDP_NETRESET on newly created UDP sockets.
WSAPoll is broken by design.
It was announced as the new way to introduce compatibility to posix
sockets, their implementation was broken, and they decided not to fix it.
You can read the full story here:
https://daniel.haxx.se/blog/2012/10/10/wsapoll-is-broken/
Unified BSD and Winsock sockets into a single implementation of a
generic NetSocket interface.
This is some ground work for few network improvements:
- Reuse as much code as possible between Posix and Windows.
- Provide a single point of implementation for exotic sdks (consoles).
- Provide platform agnostic StreamPeerTCP and PacketPeerUDP in core.
- Implement connect for UDP allowing for DTLS implementation.
This allows more consistency in the manner we include core headers,
where previously there would be a mix of absolute, relative and
include path-dependent includes.
Use a Microsoft recommended way of process termination for the project
process run from the editor. This allows loaded DLLs to receive and handle
DLL_PROCESS_DETACH notification and cleanup any global state before the
process actually exits.
Implements the same heuristic as Curl (and web browsers): if no `Content-Length`, no `Connection: keep-alive` and no chunked transfer encoding, assume th rest of the data until EOF is the body, gracefully setting the HTTP client back to the disconnected state.
Theoretically, this is not compliant with HTTP 1.1, by which `keep-alive` is the default, but in practice, an explicit header is sent by servers.
- Adds q/quit option to console debugging
- Adds options (variable_prefix)
- Breaks into debugger with Ctrl-C in local debug mode (Unix/Windows)
- Added option to list all breakpoints
- Fixes add/remove breakpoint bug (invalid path parsing)
- Minor cleanup
when godot could be found in PATH.
The correct fix is to use sysctl to get the path to the current executable
this also fixes the ability to call external commands.
Using `misc/scripts/fix_headers.py` on all Godot files.
Some missing header guards were added, and the header inclusion order
was fixed in the Bullet module.
As spotted by @robfram, closes#15288.
Also reviewed other uses of `if (String.find(.*))` for potential similar mistakes, found a wrong (and useless) one in ScriptEditorDialog.
They are NOT constant methods, as state by the comment message,
they fetch the last packet and then forget about it, actively
changing the state of the object.
This allows to specify any valid folder name (including with subfolders) to use
as user:// on all platforms. The folder is constrained to the platform-specific
OS::get_data_path() (typically what `XDG_DATA_HOME` resolves to).
Fixes#13236.
Spec version 0.7 from https://standards.freedesktop.org/basedir-spec/basedir-spec-0.7.html
(latest as of this commit).
Three virtual methods are added to OS for the various XDG paths we will use:
- OS::get_data_path gives XDG_DATA_HOME, or if missing:
~/.local/share on X11, ~/Library/Application Support/ on macOS and %APPDATA% on Windows
- OS::get_config_path gives XDG_CONFIG_HOME, or if missing:
~/.config on X11, ~/Library/Application Support/ on macOS and %APPDATA% on Windows
- OS::get_cache_path gives XDG_CACHE_HOME, or if missing:
~/.cache on X11, ~/Library/Caches on macOS and %APPDATA% on Windows
So for Windows there are no changes, for Linux we follow the full split spec
and for macOS stuff will move from ~/.godot to ~/Library/Application Support/Godot.
Support for system-wide installation of templates on Unix was removed for now,
as it's a bit hackish and I don't think anyone uses it.
user:// will still be OS::get_data_path() + "/godot/app_userdata/$name" by
default, but when using the application/config/use_shared_user_dir option
it will now use XDG_DATA_HOME/$name, e.g. ~/.local/share/MyGame.
For now everything still goes in EditorSettings::get_settings_dir(), but
this will be changed in a later commit to make use of the new splitting
where relevant.
Part of #3513.
It had been missed in d09160a8b6 and broke compilation
for those platforms.
Took the opportunity to run clang-format on the code base to fix some corner cases
that went through our static tests/were overlooked recently.
Previously logging logic was scattered over OS class implementations
with plenty of duplication. Major changes in this commit:
- Extracted logging logic into a separate Logger hierarchy. It allows
easy configuration of logging mechanism depending on compile-time or
run-time configuration.
- Implemented RotatedFileLogger which is usually used with StdLogger,
providing persistency of logs. It is often important to be able to
obtain logs of the game even in production to be able to understand
what happened prior to some problem. On mobile there previously was
no way to obtain the logs aside from having the device connected to
your machine.
- flush() is not performed in release mode for every logged line. It
is only performed for errors.
Rename user facing methods and variables as well as the corresponding
C++ methods according to the folloming changes:
* pos -> position
* rot -> rotation
* loc -> location
C++ variables are left as is.
As it turns out older versions of the Android NDK have mntent.h but not
a complete implementation. If it did work it would most likely give the
wrong results on Android anyway.
This commit enables the UNIX drive discovery only for X11
We also missed '/run/media' (default for gnome desktops) in the list of
places to look for 'drives' on Linux. Add that to the list also.
This fixes#11270
In #10973 I reset the state of the stream in get_pos() assuming that the
ftell failing would cause proper error checking. This is not how this
class was designed, however. This commit fixes the get_8() method to
not return unitialized data on eof, and removes the wrong error resets
added in #10973.
This fixes#11022
- The Windows, UWP, Android (on Windows) and Linux builds are
tested with Scons 3.0 alpha using Python 3.
- OSX and iOS should hopefully work but are not tested since
I don't have a Mac.
- Builds using SCons 2.5 and Python 2 should not be impacted.
For every UNIX-derived (Android, Linux, macOS, iOS) flavor, a global counter is atomically incremented on thread start. That id is kept as thread-local storage.
Therefore, thread ids are sequential numbers, trivially comparable. This improves the previous state of things, in which `pthread_t` were casted to `Thread::ID` and unportabily compared. Also big, ugly thread ids appeared.
Implemented with `nanosleep()`. `usleep()` is deprecated.
Also loops to ensure that __at least__ the requested time is waited, accounting for spurious interruptions.
May help in situations like reattempting to connect to the debugger.
