Input buffering is implicitly used by event accumulation, but this commit makes it more generic so it can be enabled for other uses.
For desktop OSs it's currently not feasible given main and UI threads are the same).
- API has been simplified: all events now go through `parse_input_event()`. Whether they are accumulated or not depends on the `use_accumulated_input` flag.
- Event accumulation is now thread-safe (it was not needed so far, but it prepares the ground for the following changes).
- Touch drag events now support accumulation.
The Transform::xform and xform_inv are made safe for Planes when using non-uniform scaling.
Basic unit tests for Transform.
Optimization of calling sites to prevent loss of performance from the changes to xform(Plane).
When the `sync_after_draw` feature was on it was possible for the profiler's frame_time measurement to be incorrect. This fixes this problem by storing the raw measured time for use by the profiler.
Added additional param to action related methods to test for exactness.
If "p_exact_match" is true, then the action will only be "matched" if the provided input event *exactly* matches with the action event.
Before:
* Action Event = KEY_S
* Input Event = KEY_CONTROL + KEY_S
* Is Action Pressed = True
Now:
You can still do the above, however you can optionally check that the input is exactly what the action event is:
* Action Event = KEY_S
* Input Event = KEY_CONTROL + KEY_S
* p_exact_match = True
* Is Action Pressed = False
* If the Input Event was only KEY_S, then the result would be true.
Usage:
```gdscript
Input.is_action_pressed(action_name: String, exact_match: bool)
Input.is_action_pressed("my_action", true)
InputMap.event_is_action(p_event, "my_action", true)
func _input(event: InputEvent):
event.is_action_pressed("my_action", false, true) # false = "allow_echo", true = "exact_match"
event.is_action("my_action", true)
```
Co-authored-by: Eric M <itsjusteza@gmail.com>
Investigations have showed that a lot of the random variation in frame deltas causing glitches may be due to sampling the time at the wrong place in the game loop.
Although sampling at the start of Main::Iteration makes logical sense, the most consistent deltas may be better measured after the location likely to block at vsync - either the OpenGL draw commands or the SwapBuffers.
Here we add an experimental setting to allow syncing after the OpenGL draw section of Main::Iteration.
Frame deltas are currently measured by querying the OS timer each frame. This is subject to random error. Frame delta smoothing instead filters the delta read from the OS by replacing it with the refresh rate delta wherever possible.
This PR also contains code to estimate the refresh rate based on the input deltas, without reading the refresh rate from the host OS.
Physics FPS above 1000 cause the whole project to slow down
and are not very practical in the first place (since no CPU currently
available can keep up).
(cherry picked from commit 8f4ac7bc4a)
* Add support for decimal numeric entities to String::xml_unescape
* Add more error checks to String::xml_unescape
* Refactor XMLParser to use String::xml_unescape instead of an internal
implementation
The code is based on the current version of thirdparty/vhacd and modified to use Godot's types and code style.
Additional changes:
- backported and extended PagedAllocator to allow leaked objects
- applied patch from https://github.com/bulletphysics/bullet3/pull/3037
This changes the types of a big number of variables.
General rules:
- Using `uint64_t` in general. We also considered `int64_t` but eventually
settled on keeping it unsigned, which is also closer to what one would expect
with `size_t`/`off_t`.
- We only keep `int64_t` for `seek_end` (takes a negative offset from the end)
and for the `Variant` bindings, since `Variant::INT` is `int64_t`. This means
we only need to guard against passing negative values in `core_bind.cpp`.
- Using `uint32_t` integers for concepts not needing such a huge range, like
pages, blocks, etc.
In addition:
- Improve usage of integer types in some related places; namely, `DirAccess`,
core binds.
Note:
- On Windows, `_ftelli64` reports invalid values when using 32-bit MinGW with
version < 8.0. This was an upstream bug fixed in 8.0. It breaks support for
big files on 32-bit Windows builds made with that toolchain. We might add a
workaround.
Fixes#44363.
Fixesgodotengine/godot-proposals#400.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
- Display the frame time in addition to FPS.
- Frame time is a more objective measurement in comparison to FPS,
but FPS is more familiar to people less acquainted with profiling.
- Rename "Game" to "Project" for the project FPS printing line.
(cherry picked from commit 157d8e4d36)
Having to rename project settings is rare, but when it does occur it can cause user confusion. In order to make compatibility more seamless this PR introduces two new GLOBAL_DEF functions,
GLOBAL_DEF_ALIAS(new_name, old_name, default)
GLOBAL_DEF_ALIAS_RST(new_name, old_name, default)
These are the same as the existing GLOBAL_DEF functions except that if the new setting is not found, it attempts to load from the old setting name. If the old setting is found, it stores it into the new setting, and then calls the regular GLOBAL_DEF functions.
More work is needed to make sure that those options actually solve users' issues, so we prefer to remove the options for 3.2.4 and revisit for a future release.
The rendering/quality/2d section of project settings is becoming considerably expanded in 3.2.4, and arguably was not the correct place for settings that were not really to do with quality.
3.2.4 is the last sensible opportunity we will have to move these settings, as the only existing one likely to break compatibility in a small way is `pixel_snap`, and given that the whole snapping area is being overhauled we can draw attention to the fact it has changed in the release notes.
Class reference is also updated and slightly improved.
`pixel_snap` is renamed to `gpu_pixel_snap` in the project settings and code to help differentiate from CPU side transform snapping.
Thow errors if requesting an unexisting InputMap action.
Makes `Input.is_action_*` methods consistents with `Event.is_action_*` which already throw errors.
fixes#33303
(cherry picked from commit 2aee71d52d)
In addition, add support for scaling and applying filter to the splash screen on Android.
One limitation of the api being used is that the splash screen aspect ratio is not maintained when it's scaled up.
- Based on C++11's `thread` and `thread_local`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed (except for the few cases of non-portable functions)
- Simpler for `NO_THREADS`
- Thread ids are now the same across platforms (main is 1; others follow)
- Based on C++14's `shared_time_mutex`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed
- Simpler for `NO_THREADS`
This can be used in server builds for journalctl compatibility.
(cherry picked from commit 341b9cf15a)
Fixes crash when exiting with --verbose with leaked resources
(cherry picked from commit 25c4dacb88)
This adds a new project setting (`physics/common/enable_pause_aware_picking`). It's disabled by default.
When enabled, it changes the way 2D & 3D physics picking behaves in relation to pause:
- When pause is set, every collision object that is hovered or captured (3D only) is released from that condition, getting the relevant mouse-exit callback., unless its pause mode makes it immune from pause.
- During the pause. picking only considers collision objects immune from pause, sending input events and enter/exit callbacks to them as expected.
- When pause is left, nothing happens. This is a big difference with the classic behavior, which at this point would process all the input events that have been queued against the current state of the 2D/3D world (in other words, checking them against the current position of the objects instead of those at the time of the events).
This ensures that settings like `gui/theme/custom_font` handle resource
remappings properly, as they load resources in `register_scene_types()`.
Path remaps used to be done before loading scene types in early Godot
versions (as hinted by the "Load Remaps" comment just before "Load Scene
Types") but this was broken when developing new localization features.
Fixes#17640.
(cherry picked from commit bb5dcb6892)
No longer use emscripten functions for gamepads, implement them as
library functions in library_godot_display.js instead.
This allows us to do a better job at "guessing" vendorId, productId, OS,
etc. thus allowing us to better find the remapping for the controller.
In the core input handling code we have checks to make sure that if axis
rapidly change sign we inject mid-points to release any pending inputmap
action.
The function though, did not correctly insert the mid-point causing
dpads mapped to an axis that behaves like tri-state buttons (-1,0,1) to
not be released correctly.
This commit fixes that by including in the check the case where the axis
swtiches from abs(1) to 0.
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
(cherry picked from commit b5334d14f7)
When a project setting is not found, a warning message is printed.
This moves the default value declaration so it can be found when
the `--help` or `--version` command line arguments are used.
(cherry picked from commit 5cd37de125)
Partially revert change allowing sprite get_rect snapping to be controlled by `pixel_snap` again rather than `transform_snap` (to prevent breaking compatibility). Adds a final `use_camera_snap` project setting to allow snapping viewports as in reduz original PR.
This partially reverts #44041.
Also fix the bogus label about lack of GLES3 support being always shown...
It was meant to be behind a check but I had left it out while testing, and
forgot to put it back.
This only applies to the project manager instance, what driver is used is otherwise
still defined by the project settings for a running game/editor.
Should help users who have issues with buggy GLES3 drivers to still use the project
manager to create and edit GLES2 projects.
Export presets contains the export_path option, to specify the default
export location, but the CLI export option disregarded that, and always
required and export path to be specified.
After this commit, if the export path is not specified in the command,
the one in the preset will be used, erroring only if it's not present or
invalid.
(cherry picked from commit 032a1c5dc3)
Since exporters will save their own icon, the target platforms
don't have to support SVG to display the icon correctly.
This closes#23068.
(cherry picked from commit 0f9432f060)
New corporate sponsors:
Spiffcode (Platinum)
ASIFA-Hollywood (Silver)
Zenva Academy (Silver)
Thanks to all contributors and donors for making Godot possible!
(cherry picked from commit 4960894880)
The thread model option for physics (2D) and rendering (single-unsafe,
single-safe, multithread), was causing crashes/locks when set as
multithreaded and exported for a platform that does not support threads
(namely HTML5).
This commit ensures that when threads support is not available, that
option is ignored, and the equivalent of "single-unsafe" is always used
instead.
(cherry picked from commit f3c6ac1d71)
This is a revert of 9d78274e06, which was an attempt to fix#21431, but in the end it seems a different problem was the root of the issue.
Renewing focus steal allowance every time is needed on Windows.
Due to `user://` returning the current working directory when no
project is open, this caused logs to be written to `$HOME`
most of the time.
This closes#40305.
(cherry picked from commit b89dc6ae00)
- Use the `.log` file extension (recognized on Windows out of the box)
to better hint that generated files are logs. Some editors provide
dedicated syntax highlighting for those files.
- Use an underscore to separate the basename from the date and
the date from the time in log filenames. This makes the filename
easier to read.
- Keep only 5 log files by default to decrease disk usage in case
messages are spammed.
(cherry picked from commit 20af28ec06)
The Low Processor Usage Mode Sleep Usec setting is now used as a
FPS limiter rather than a constant sleep duration.
This will increase CPU/GPU usage slightly due to the higher
effective FPS, but the increase in overall smoothness is worth it.
If both Force Fps and Low Processor Usage Mode settings are enabled
in the project settings, only the setting that causes the highest
sleep duration will be retained.
This closes#11030.
(cherry picked from commit 1c28b269d8)
- Fixed floating point issue on the old one.
- Fixed the equation on the get_euler_yxz function.
- Added unit tests.
This work has been kindly sponsored by IMVU.
(cherry picked from commit 2331300989)
Since projects started from the editor or exported in debug mode
run slower than those exported in release mode, this should be
clearly presented to the user.
This partially addresses #20219.
(cherry picked from commit a9c60007a9)
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
(cherry picked from commit cd4e46ee65)
This patch adds ability to include external, user-defined C++ modules
to be compiled as part of Godot via `custom_modules` build option
which can be passed to `scons`.
```
scons platform=x11 tools=yes custom_modules="../project/modules"
```
Features:
- detects all available modules under `custom_modules` directory the
same way as it does for built-in modules (not recursive);
- works with both relative and absolute paths on the filesystem;
- multiple search paths can be specified as a comma-separated list.
Module custom documentation and editor icons collection and generation
process is adapted to work with absolute paths needed by such modules.
Also fixed doctool bug mixing absolute and relative paths respectively.
Implementation details:
- `env.module_list` is a dictionary now, which holds both module name as
key and either a relative or absolute path to a module as a value.
- `methods.detect_modules` is run twice: once for built-in modules, and
second for external modules, all combined later.
- `methods.detect_modules` was not doing what it says on the tin. It is
split into `detect_modules` which collects a list of available modules
and `write_modules` which generates `register_types` sources for each.
- whether a module is built-in or external is distinguished by relative
or absolute paths respectively. `custom_modules` scons converter
ensures that the path is absolute even if relative path is supplied,
including expanding user paths and symbolic links.
- treats the parent directory as if it was Godot's base directory, so
that there's no need to change include paths in cases where custom
modules are included as dependencies in other modules.
(cherry picked from commit a96f0e98d7)
Removed by mistake in #38292 like the Windows `__XINPUT_DEVICE__`,
this magic binding is referenced directly in our code.
(cherry picked from commit 1c61b31109)
The 204 and 205 are the older, SDL 2.0.4 and 2.0.5 compatible mappings,
but since all new mappings have only been added to the main
gamecontrollerdb.txt which overrides the older entries, it doesn't make
much sense for us to keep the old databases.
We do not support the SDL2 half axes and inverted axes features from
gamecontrollerdb.txt, but this only impacts the specific controllers
which can use those features, the rest are parsed and used properly.
As for godotcontrollerdb.txt, it doesn't make sense for us to maintain
our own custom mappings instead of submitting them upstream. The only
exception is the Javascript and UWP platforms for which no bindings are
available upstream, so we keep those entries.
(cherry picked from commit 510e83498e)
This adds 2 new values (items and draw calls) to the performance monitor in a '2d' section, rather than reusing the 3d values in the 'raster' section.
This makes it far easier to optimize games to minimize drawcalls.
This is needed as C# may free resources from the finalizer thread during
CSharpLanguage::finish(). Previously this would result in RIDs not being freed.
This option is meant to use together with `--path` or from a project
folder. Otherwise the project manager is opened and the option triggers
a crash.
Fixes#25589.
The previous behavior relying on the provided extension was problematic
on macOS since .zip is the main extension used for the full project
export (binary + data pack).
We add a dedicated `--export-pack` command line option to define when
only the data pack should be exported. Its extension will still be
inferred from the path.
Fixes#23073.
