enh: Add FLAG_NONE to SaverFlags in ResourceSaver to fix api inconsistency
fix: flags parameter of ResourceSaver::save is now uint32_t to allow flag composition in scripts
Previously, only one line per 100 files was printed.
This also refactors the print statement to use Godot methods and
make it more informative overall.
Using codespell 2.2-dev from current git.
Added `misc/scripts/codespell.sh` to make it easier to run it once in a
while and update the skip and ignore lists.
This was changed in #56943 to allow adding new importers from plugins that
take precedence over built-in ones, but this should be opt-in, not the default
behavior.
Fixes#57730.
Now correctly erases old instances.
The code will likely need overhaul anyway to be usable.
It doesn't apply to editor runs, there's a bunch of inconsistencies on
how to clients are handled, and I don't really understand why multiple
instances are created for a single client/server.
First, we should not insert into cache if the hostname resolution has
failed (as it might be a temporary internet issue), second, the async
resolver should also properly insert into cache.
Took the chance to remove some duplicate code with critical section in
it at the cost of little performance when calling the blocking
resolve_hostname function.
This commit adds a condition to VariantCaster that casts Variants of type OBJECT to any type T, if T is derived from Object.
This change enables a fair bit of code cleanup. First, the Variant implicit cast operators for Node and Control can be removed, which allows for some invalid includes to be removed. Second, helper methods in Tree whose sole purpose was to cast arguments to TreeItem * are no longer necessary.
A few small changes also had to be made to other files, due to the changes cascading down all the includes.
On the only platform where PVRTC is supported (iOS),
ETC2 generally supersedes PVRTC in every possible way. The increased
memory usage is not really a problem thanks to modern iOS' devices
processing power being higher than its Android counterparts.
Each file in Godot has had multiple contributors who co-authored it over the
years, and the information of who was the original person to create that file
is not very relevant, especially when used so inconsistently.
`git blame` is a much better way to know who initially authored or later
modified a given chunk of code, and most IDEs now have good integration to
show this information.
When a request was issued to a server that returned "content-length" header
whose value was greater than that of an "int" we ran into overflow
problems. The fix for this was rather simple by increasing the data
type to `int64_t`
All arrays are now prefixed with `PACKED_` to distinguish them from
GDScript's generic typed arrays.
`RAW_ARRAY` is now `PACKED_BYTE_ARRAY` (RawArray was the name of
PackedByteArray back in Godot 2.x).
-Allows displaying custom options for specific file format variants
-Added support for scene format import to retrieve custom options
This PR is necessary for #54886 to be implemented properly.
Move multiplayer classes to "core/multiplayer" subdir.
Move the RPCConfig and enums (TransferMode, RPCMode) to a separate
file (multiplayer.h), and bind them to the global namespace.
Move the RPC handling code to its own class (RPCManager).
Renames "get_rpc_sender_id" to "get_remote_sender_id".
This commit completely removes the RPC_MODE_MASTER ("master" keyword),
and renames the RPC_MODE_PUPPET to RPC_MODE_AUTHORITY ("auth" keyword).
This commit also renames the "Node.[get|set]_network_master" methods to
"Node.[get|set]_network_authority".
This commit also renames the RPC_MODE_REMOTE constant to RPC_MODE_ANY.
RPC_MODE_MASTER in Godot 3.x meant that a given RPC would be callable by
any puppet peer on the master, while RPC_MODE_PUPPET meant that it would
be callable by the master on any puppet.
Beside proving to be very confusing to the user (referring to where it
could be called instead of who can call it) the RPC_MODE_MASTER is quite
useless. It is almost the same as RPC_MODE_REMOTE (anyone can call) with
the exception that the network master cannot. While this could be useful
to check in some case, in such a function you would anyway need to check
in code who is the caller via get_rpc_sender_id(), so adding the check
there for those rare cases does not warrants a dedicated mode.
Adds ability to add error return documetation to the binder and class reference.
Usage example:
```C++
void MyClass::_bind_method() {
[..]
BIND_METHOD_ERR_RETURN_DOC("load", ERR_FILE_CANT_OPEN, ERR_FILE_UNRECOGNIZED);
}
```
One function of ConfigFile was changed as example.
* New syntax is type safe.
* New syntax allows for type safe virtuals in native extensions.
* New syntax permits extremely fast calling.
Note: Everything was replaced where possible except for `_gui_input` `_input` and `_unhandled_input`.
These will require API rework on a separate PR as they work different than the rest of the functions.
Added a new method flag METHOD_FLAG_OBJECT_CORE, used internally. Allows to not dump the core virtuals like `_notification` to the json API, since each language will implement those as it is best fits.
Like the spawn/despawn feature, it can be completely overridden with 2
custom callables.
The callables will be called with the list of tracked objects.
In SERVER mode, objects are automatically tracked, while in CUSTOM mode
you can manually track them via `track`/`untrack` (but that's optional).
The default sync only happens from server to client, with batch updates,
over unreliable channel (but with custom ordering).
The default sync will warn you, if your state representation gets too
big.
Move the former "spawnables" functions to a dedicated
MultiplayerReplicator class.
Support custom overrides in replicator.
Spawn/despawn messages can now contain a state.
The state can be automatically encoded/decoded by passing the desired
object properties to `spawnable_config`.
You can use script properties to optimize the state representation.
2 Callables can be also specified to completely override the default
implementation for sending and receiving the spawn/despawn event.
(9 bytes overhead, and there's room for improvement here).
When using a custom implementation `spawn` and `despawn` can be called
with any Object, `send_spawn`/`send_despawn` can receive any Variant as
a state, and the path is not required.
Two new functions, `spawn` and `despawn`, convey the implementation
independent method for requesting a spawn/despawn of an Object, while
`send_spawn` and `send_despawn` represent the more low-level send event
for a Variant to be used by the custom implementations.
`PackedScene`s can be configured to be spawnable via a new
`MultiplayerAPI.spawnable_config` method.
They can be configured either to be spawned automatically when coming
from the server or to always require verification.
Another method, `MultiplayerAPI.send_spawn` lets you request a spawn on
the remote peers.
When a peer receive a spawn request:
- If it comes from the server and the scene is configured as
`SPAWN_MODE_SERVER`:
- Spawn the scene (instantiate it, add it to tree).
- Emit signal `network_spawn`.
- Else:
- Emit signal `network_spawn_request`.
In a similar way, `despawn`s are handled automatically in
`SPAWN_MODE_SERVER`.
In `SPAWN_MODE_SERVER`, when a new client connects it will also receive,
from the server all the spawned (and not yet despawned) instances.
These methods were broken by 22419082d9
5 years ago and nobody complained, so maybe they're not so useful...
But at least this should restore them to a working state.
Adds a few more complex edge cases which are supported.
Also adds some documentation, simplifies the code a bit and forbids using
double quotes as a delimiter.
This seems to be a pretty old bug, older then originally reported (at
least under certain circumstances).
The IP singleton uses a resolve queue so developers can queue hostnames
for resolution in a separate while keeping the main thread unlocked
(address-resolution OS functions are blocking, and could block for a long
time in case of network disruption).
In most places though, the address resolution function was called with
the mutex locked, causing other functions (querying status, queueing
another hostname, ecc) to block until that resolution ended.
This commit ensures that all calls to OS address resolution are done
with the mutex unlocked.
Variants like dictionaries and arrays can have cyclic references, which
caused `encode_variant` to run an infinite recursion.
Instead of keeping a stack and looking for cyclic references which would
make serialization slower, this commit adds a `MAX_RECURSION_DEPTH`
constant to Variant, and have `encode_variant` keep track of the current
recursion depth, bailing when it's too high since this likely means a
cyclic reference has been encountered.
Used by ENetMultiplayerPeer and WebSocketServer to generate network IDs,
and exposed to the user for p2p networks (e.g. WebRTCMultiplayerPeer)
and custom MultiplayerPeer implementations.
Found via `codespell -q 3 -S ./thirdparty,*.po,./DONORS.md -L ackward,ang,ans,ba,beng,cas,childs,childrens,dof,doubleclick,fave,findn,hist,inout,leapyear,lod,nd,numer,ois,ony,paket,seeked,sinc,switchs,te,uint`
* Most resource types now have unique identifiers.
* Applies to text, binary and imported resources.
* File formats reference both by text and UID (when available). UID always has priority.
* Resource UIDs are 64 bits for better compatibility with the engine.
* Can be represented and used textually, example `uuid://dapwmgsmnl28u`.
* A special binary cache file is used and exported, containing the mappings.
Example of how it looks:
```GDScript
[gd_scene load_steps=2 format=3 uid="uid://dw86wq31afig2"]
[ext_resource type="PackedScene" uid="uid://bt36ojelx8q6c" path="res://subscene.scn" id="1_t56hs"]
```
GDScript, shaders and other special resource files can't currently provide UIDs, but this should be doable with special keywords on the files.
This will be reserved for future PRs.
* Friendlier with version control.
* Generates pseudo unique IDs, to minimize conflicts when merging, but still
user readable (so, not UUID).
* Eventually will also allow to have more precisely named sub-resources in
imported files.
* This will allow better reloading on changes (including resources already
loaded) as well as better keeping track of changes on the DCC.
* Keeps backward compatibility with the old formats.
* Binary and text format version incremented to mark breakage in forward
compatibility.
- Move the "sync" property for RPCs to RPCConfig.
- Unify GDScript annotations into a single one:
- `@rpc(master)` # default
- `@rpc(puppet)`
- `@rpc(any)` # former `@remote`
- Implement three additional `@rpc` options:
- The second parameter is the "sync" option (which also calls the
function locally when RPCing). One of "sync", "nosync".
- The third parameter is the transfer mode (reliable, unreliable,
ordered).
- The third parameter is the channel (unused for now).
* Added a new macro SNAME() that constructs and caches a local stringname.
* Subsequent usages use the cached version.
* Since these use a global static variable, a second refcounter of static usages need to be kept for cleanup time.
* Replaced all theme usages by this new macro.
* Replace all signal emission usages by this new macro.
* Replace all call_deferred usages by this new macro.
This is part of ongoing work to optimize GUI and the editor.
error: comparison is always false due to limited range of data type [-Werror=type-limits]
ERR_FAIL_COND_V_MSG(p_port < 0 || p_port > 65535, ERR_INVALID_PARAMETER, "The local port number must be between 0 and 65535 (inclusive).");
Added new "encode_real" methods for handling real_t, and used them for vector types. Types are encoded based on compilation setting.
But for decoding, always check how it was encoded. This way, serialized data is cross-compatible with Godot compiled with singles and Godot compiled with doubles. At least, in theory.
