Allows 2D character controller to work without applying gravity when
touching the ground (also more safely in 3D), and collision detection
is more flexible with different safe margin values.
Character body motion changes in 2D and 3D:
-Recovery only for depth > min contact depth to help with collision
detection consistency (rest info could be lost if recovery was too much)
-Adaptive min contact depth (based on margin) instead of space parameter
Extra CharacterBody changes:
-2D: apply changes made in 3D for stop on slope and floor snap that help
fixing some jittering cases
-3D: fix minor inconsistencies in stop on slope and floor snap logic
In case the reference is stored in script, create a new instance to
avoid overriding the previous values.
Otherwise, re-use the reference as before to avoid extra allocations.
RigidDynamicBody modes are replaced with several properties to make their
usage clearer:
-lock_rotation: disable body's rotation (instead of MODE_LOCKED)
-freeze: no gravity or forces (instead of MODE_STATIC and MODE_KINEMATIC)
-freeze_mode: Static (can be only teleported) or Kinematic (can be animated)
Also renamed MODE_DYNAMIC_LOCKED to MODE_DYNAMIC_LINEAR in the physics
servers.
Changes:
-Added support for custom inertia and center of mass in 3D
-Added support for custom center of mass in 2D
-Calculated center of mass from shapes in 2D (same as in 3D)
-Fixed mass properties calculation with disabled shapes in 2D/3D
-Removed first_integration which is not used in 2D and doesn't seem to
make a lot of sense (prevents omit_force_integration to work during the
first frame)
-Support for custom inertia on different axes for RigidBody3D
Instead of having a physics node named Static that can be either Static
or Kinematic, AnimatableBody is added again as a separate node:
-Inherited from StaticBody to make its usage clearer
-Still separated from CharacterBody to make its usage more focused
Properly implemented constant velocity for kinematic bodies in godot
physics servers (induced velocity without actually moving).
Also updated description for the different physics nodes to make their
usage clearer.
Use a C++ callback instead of Callable for synchronizing physics nodes' state with physics servers.
Remove usage of PhysicsDirectBodyState in physics nodes when not
necessary.
Store PhysicsDirectBodyState for bodies individually instead of a
singleton to avoid issues when accessing direct body state for multiple
bodies.
PhysicsDirectBodyState is initialized only when needed, so it doesn't
have to be created when using the physics server directly.
Move PhysicsDirectBodyState2D and PhysicsDirectBodyState3D to separate
cpp files.
Make separation ray shapes work properly in move_and_slide, wihtout the
specific code in CharacterBody like before.
Now most of the logic is handled inside the physics server. The only
thing that's needed is to use ray shapes only for recovery and ignore
them when performing the motion itself (unless we're snapping or slips
on slope is on).
Improves stop on slopes, sliding on walls and gravity handling by
porting existing changes from CharacterBody2D to CharacterBody3D.
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
* New syntax is type safe.
* New syntax allows for type safe virtuals in native extensions.
* New syntax permits extremely fast calling.
Note: Everything was replaced where possible except for `_gui_input` `_input` and `_unhandled_input`.
These will require API rework on a separate PR as they work different than the rest of the functions.
Added a new method flag METHOD_FLAG_OBJECT_CORE, used internally. Allows to not dump the core virtuals like `_notification` to the json API, since each language will implement those as it is best fits.
Changes:
- Rename few methods/property and group them in the editor when it's possible
- Make MotionResult API consistency with KinematicCollision
- Return a boolean in move_and_slide if there was a collision
- New methods:
- get_floor_angle on CharacterBody to get the floor angle.
- get_angle on KinematicCollision to get the collision angle.
- get_last_slide_collision to quickly get the latest collision of move_and_slide.
This PR and commit adds a new IK system for 3D with the Skeleton3D node
that adds several new IK solvers, as well as additional changes and functionality
for making bone manipulation in Godot easier.
This work was sponsored by GSoC 2020 and TwistedTwigleg
Full list of changes:
* Adds a SkeletonModification3D resource
* This resource is the base where all IK code is written and executed
* Adds a SkeletonModificationStack3D resource
* This node oversees the execution of the modifications and acts as a bridge of sorts for the modifications to the Skeleton3D node
* Adds SkeletonModification3D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK
* Each modification is in it's own file
* Several changes to Skeletons, listed below:
* Added local_pose_override, which acts just like global_pose_override but keeps bone-child relationships intract
* So if you move a bone using local_pose_override, all of the bones that are children will also be moved. This is different than global_pose_override, which only affects the individual bone
* Internally bones keep track of their children. This removes the need of a processing list, makes it possible to update just a few select bones at a time, and makes it easier to traverse down the bone chain
* Additional functions added for converting from world transform to global poses, global poses to local poses, and all the same changes but backwards (local to global, global to world). This makes it much easier to work with bone transforms without needing to think too much about how to convert them.
* New signal added, bone_pose_changed, that can be used to tell if a specific bone changed its transform. Needed for BoneAttachment3D
* Added functions for getting the forward position of a bone
* BoneAttachment3D node refactored heavily
* BoneAttachment3D node is now completely standalone in its functionality.
* This makes the code easier and less interconnected, as well as allowing them to function properly without being direct children of Skeleton3D nodes
* BoneAttachment3D now can be set either using the index or the bone name.
* BoneAttachment3D nodes can now set the bone transform instead of just following it. This is disabled by default for compatibility
* BoneAttachment3D now shows a warning when not configured correctly
* Added rotate_to_align function in Basis
* Added class reference documentation for all changes
Infinite inertia:
Not needed anymore, since it's now possible to set one-directional
collision layers in order for characters to ignore rigid bodies, while
rigid bodies still collide with characters.
Ray shapes:
They were introduced as a work around to allow constant speed on slopes,
which is now possible with the new property in CharacterBody instead.
Same thing that was already done in 2D, applies moving platform motion
by using a call to move_and_collide that excludes the platform itself,
instead of making it part of the body motion.
Helps with handling walls and slopes correctly when the character walks
on the moving platform.
Also made some minor adjustments to the 2D version and documentation.
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
When synchronizing CharacterBody motion with moving the platform using
direct body state, only the linear velocity was taken into account.
This change exposes velocity at local point in direct body state and
uses it in move_and_slide to get the proper velocity that includes
rotations.
* Clean-up of node_3d_editor_plugin.{h,cpp}: removed unused code, fixed some bugs.
* Moved node_3d_editor_gizmos.{h,cpp} to editor/plugins.
* Added support for multiple gizmos per node. This means custom gizmos will no longer override the built-in ones and that multiple gizmos can be used in more complex nodes.
* Added support for handle IDs. When adding handles to a gizmo, an ID can be specified for each one, making it easier to work with gizmos that have a variable number of handles.
* Added support for subgizmos, selectable elements that can be transformed without needing a node of their own. By overriding _subgizmo_intersect_frustum() and/or _subgizmo_intersect_ray() gizmos can define which subgizmos should be selected on a region or click selection. Subgizmo transformations are applied using get/set/commit virtual methods, similar to how handles work.
More accurate unsafe motion calculation
* Safe and unsafe motion are calculated by dichotomy with a limited
number of steps. It's good for performance, but on long motions that
either collide near the beginning or near the end, the result can be
very imprecise.
* Now a factor 0.25 or 0.75 is used to converge faster when this case
happens, which allows longer motions to get more accurate collision
detection.
* Makes snap collision more precise, and helps with cases where diagonal collision on the border of a platform can lead to the character being stuck.
Additional improvements to move_and_slide:
* Handle slide canceling in move_and_collide with 0 velocity instead of
not applying it.
* Better handling of snap with custom logic to cancel sliding.
* Remove small jittering when using stop on slope, by canceling the
motion completely when the resulting motion is less than margin instead
of always projecting to the up direction (in both body motion and snap).
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
New property disable_mode to set different behaviors:
Remove: remove from physics simulation
MakeStatic: change body mode to static (doesn't affect area and soft body)
KeepActive: do nothing
Extra change:
Handle disable/enable node state with specific notifications, in order
to differentiate global pause from disabled nodes.
* Functions to convert to/from degrees are all gone. Conversion is done by the editor.
* Use PROPERTY_HINT_ANGLE instead of PROPERTY_HINT_RANGE to edit radian angles in degrees.
* Added possibility to add suffixes to range properties, use "min,max[,step][,suffix:<something>]" example "0,100,1,suffix:m"
* In general, can add suffixes for EditorSpinSlider
Not covered by this PR, will have to be addressed by future ones:
* Ability to switch radians/degrees in the inspector for angle properties (if actually wanted).
* Animations previously made will most likely break, need to add a way to make old ones compatible.
* Only added a "px" suffix to 2D position and a "m" one to 3D position, someone needs to go through the rest of the engine and add all remaining suffixes.
* Likely also need to track down usage of EditorSpinSlider outside properties to add suffixes to it too.
Make sure the direction of the motion is preserved, unless the depth is
higher than the margin, which means the body needs depenetration in any
direction.
Also changed move_and_slide to avoid sliding on the first motion, in
order to avoid issues with unstable position on ground when jumping.
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
CharacterBody has a linear_velocity property to replace the argument in
move_and_slide.
StaticBody handles reporting linear/angular velocity correctly when
kinematic motion is used (in 3D, used in vehicle and navigation).
Safe margin property on CharacterBody only, used as argument in
move_and_collide.
Removed kinematic_safe_margin in 3D physics server, not really useful
and now harmonized with 2D.
Does the same thing as simulate motion from RigidBody in Kinematic mode,
and CharacterBody (previously KinematicBody).
Added support for constant linear/angular velocity with kinematic_motion
in StaticBody, which moves the body in physics.
Updated documentation for StaticBody and CharacterBody to describe their
functionalities more accurately.
MODE_DYNAMIC instead of MODE_RIGID
MODE_DYNAMIC_LOCKED instead of MODE_CHARACTER
No more special case for sleeping behavior for MODE_DYNAMIC_LOCKED
(MODE_CHARACTER was forcing the body not to sleep, which is redundant
with can_sleep and wasn't done in Bullet).
- snap property to replace move_and_slide_with_snap()
- floor_max_angle, stop_on_slope, infinite_inertia, max_slides,
up_direction properties to replace arguments from move_and_slide()
- up direction now defaults to Vector3.UP and Vector2.UP
PhysicsBody now has methods move_and_collide/test_move and needed
properties for these methods: safe margin, locked axes (3D only).
Moved collision_exceptions from StaticBody to PhysicsBody for 3D
(same as 2D, and conforms to documentation).
RigidBody doesn't have test_motion method anymore, it's now redundant
with PhysicsBody.test_move.
-For inspector refresh, the inspector now detects if a property change by polling a few times per second and then does update the control if so. This process is very cheap.
-For property list refresh, a new signal (property_list_changed) was added to Object. _change_notify() is replaced by notify_property_list_changed()
-Changed all objects using the old method to the signal, or just deleted the calls to _change_notify(<property>) since they are unnecesary now.
-Rendering server now uses a split RID allocate/initialize internally, this allows generating RIDs immediately but initialization to happen later on the proper thread (as rendering APIs generally requiere to call on the right thread).
-RenderingServerWrapMT is no more, multithreading is done in RenderingServerDefault.
-Some functions like texture or mesh creation, when renderer supports it, can register and return immediately (so no waiting for server API to flush, and saving staging and command buffer memory).
-3D physics server changed to be made multithread friendly.
-Added PhysicsServer3DWrapMT to use 3D physics server from multiple threads.
-Disablet Bullet (too much effort to make multithread friendly, this needs to be fixed eventually).
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
Using `clang-tidy`'s `modernize-use-default-member-init` check and
manual review of the changes, and some extra manual changes that
`clang-tidy` failed to do.
Also went manually through all of `core` to find occurrences that
`clang-tidy` couldn't handle, especially all initializations done
in a constructor without using initializer lists.
Part of #33027, also discussed in #29848.
Enforcing the use of brackets even on single line statements would be
preferred, but `clang-format` doesn't have this functionality yet.
