Now the process uses a Map to lookup node pointers instead of iterating
over all modified node paths in a list and comparing them for each
property to check.
The process also avoids checking properties with empty node paths and
does an early exit on deleted nodes to avoid checking the node and its
descendants.
Also made a minor change in NodePath::rel_path_to() to avoid resizing a
Vector many times for long paths (with copy-on-write each time). Now
it's down to 2 resize calls in any case.
This PR implements range iterators in the base containers (Vector, Map, List, Pair Set).
Given several of these data structures will be replaced by more efficient versions, having a common iterator API will make this simpler.
Iterating can be done as follows (examples):
```C++
//Vector<String>
for(const String& I: vector) {
}
//List<String>
for(const String& I: list) {
}
//Map<String,int>
for(const KeyValue<String,int>&I : map) {
print_line("key: "+I.key+" value: "+itos(I.value));
}
//if intending to write the elements, reference can be used
//Map<String,int>
for(KeyValue<String,int>& I: map) {
I.value = 25;
//this will fail because key is always const
//I.key = "hello"
}
```
The containers are (for now) not STL compatible, since this would mean changing how they work internally (STL uses a special head/tail allocation for end(), while Godot Map/Set/List do not).
The idea is to change the Godot versions to be more compatible with STL, but this will happen after conversion to new iterators have taken place.
* The harcoded 8 slots are no more and impose limits in the new extension system.
* New system is limitless, although it will impose small performance hit with a mutex.
* Use a token to request the instance binding.
**Warning**: Mono will most likely break as a result of this, will need to be modified to use the new system.
* Lua table syntax uses named indexing: `{ mykey = myvalue }`
* Python style syntax uses string indexing: `{ "mykey" : myvalue }`
* Both are incompatible since a StringName key wont fetch a String key, hence confusing.
* This PR proposes always using String for indexing at a very minimal performance cost. Always indexing with StringNames will be faster, but they are considerably more expensive to create.
Vector handles this silently by returning -1, and we should do the same here.
Otherwise we get errors when calling `find()` on e.g. a LocalVector of size 0,
while `find()` is expected to always work (if the parameters are invalid then
it doesn't find anything, so -1).
Fixup to #49925.
* Functions to convert to/from degrees are all gone. Conversion is done by the editor.
* Use PROPERTY_HINT_ANGLE instead of PROPERTY_HINT_RANGE to edit radian angles in degrees.
* Added possibility to add suffixes to range properties, use "min,max[,step][,suffix:<something>]" example "0,100,1,suffix:m"
* In general, can add suffixes for EditorSpinSlider
Not covered by this PR, will have to be addressed by future ones:
* Ability to switch radians/degrees in the inspector for angle properties (if actually wanted).
* Animations previously made will most likely break, need to add a way to make old ones compatible.
* Only added a "px" suffix to 2D position and a "m" one to 3D position, someone needs to go through the rest of the engine and add all remaining suffixes.
* Likely also need to track down usage of EditorSpinSlider outside properties to add suffixes to it too.
error: comparison is always false due to limited range of data type [-Werror=type-limits]
ERR_FAIL_COND_V_MSG(p_port < 0 || p_port > 65535, ERR_INVALID_PARAMETER, "The local port number must be between 0 and 65535 (inclusive).");
* Ability to allocate empty objects in RID_Owner, so RID_PtrOwner is not needed in most cases.
* Improves cache usage, as objects are now allocated together
* Should improve performance in 2D rendering
* Deprecates GDNative in favor of a simpler, lower level interface.
* New extension system allows registering core engine classes.
* Simple header interface in gdnative_interace.h
This can be used by editor plugins and non-game applications to
store data in the correct directories according to the
XDG Base Directory specification.
Added new "encode_real" methods for handling real_t, and used them for vector types. Types are encoded based on compilation setting.
But for decoding, always check how it was encoded. This way, serialized data is cross-compatible with Godot compiled with singles and Godot compiled with doubles. At least, in theory.
Updates rich_text_label so that the built-in documentation can be searched
Previously, it would only find the first result and would not select other results
Renames "_entered" functions to "_submitted"
This commit adds the following properties to GeometryInstance3D: `visibility_range_begin`,
`visibility_range_begin_margin`, `visibility_range_end`, `visibility_range_end_margin`.
Together they define a range in which the GeometryInstance3D will be visible from the camera,
taking hysteresis into account for state changes. A begin or end value of 0 will be ignored,
so the visibility range can be open-ended in both directions.
This commit also adds the `visibility_parent` property to 'Node3D'.
Which defines the visibility parents of the node and its subtree (until
another parent is defined).
Visual instances with a visibility parent will only be visible when the parent, and all of its
ancestors recursively, are hidden because they are closer to the camera than their respective
`visibility_range_begin` thresholds.
Combining visibility ranges and visibility parents users can set-up a quick HLOD system
that shows high detail meshes when close (i.e buildings, trees) and merged low detail meshes
for far away groups (i.e. cities, woods).
The order of numbers is not changed except for Transform2D. All logic is done inside of their structures (and not in Variant).
For the number of decimals printed, they now use String::num_real which works best with real_t, except for Color which is fixed at 4 decimals (this is a reliable number of float digits when converting from 16-bpc so it seems like a good choice)
String.get_slice_count is always at least 1 or 2 for bases with a port number.
Before this change the following URL would return ERR_INVALID_PARAMETER ```ws://127.0.0.1:8000/test```
* RingBuffer had no reason to be in this context
* A single buffer is used that can grow as much as the game needs.
This should make thread loading entirely reliable.
The error check was added for `FileAccessUnix` but it's not an error when both
`p_src` and `p_length` are zero.
Added correct error checks to all implementations to prevent the actual
erroneous case: `p_src` is nullptr but `p_length > 0` (risk of null pointer
indexing).
Fixes#33564.
This PR and commit adds a new IK system for 2D with the Skeleton2D node
that adds several new IK solvers, a way to control bones in a Skeleton2D
node similar to that in Skeleton3D. It also adds additional changes
and functionality.
This work was sponsored by GSoC 2020 and TwistedTwigleg.
Full list of changes:
* Adds a SkeletonModifier2D resource
* This resource is the base where all IK code is written and executed
* Has a function for clamping angles, since it is so commonly used
* Modifiers are unique when duplicated so it works with instancing
* Adds a SkeletonModifierStack2D resource
* This resource manages a series of SkeletonModification2Ds
* This is what the Skeleton2D directly interfaces with to make IK possible
* Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK
* Each modification is in its own file
* There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together
* Adds a PhysicalBone2D node
* Works similar to the PhysicalBone3D node, but uses a RigidBody2D node
* Changes to Skeleton2D listed below:
* Skeleton2D now holds a single SkeletonModificationStack2D for IK
* Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D
* Changes to Bone2D listed below:
* The default_length property has been changed to length. Length is the length of the bone to its child bone node
* New bone_angle property, which is the angle the bone has to its first child bone node
* Bone2D caches its transform when not modified by IK for IK interpolation purposes
* Bone2D draws its own editor gizmo, though this is stated to change in the future
* Changes to CanvasItemEditor listed below:
* Bone2D gizmo drawing code removed
* The 2D IK code is removed. Now Bone2D is the only bone system for 2D
* Transform2D now has a looking_at function for rotating to face a position
* Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE
* These notifications only are called in the editor right before and after saving a scene
* Needed for not saving the IK position when executing IK in the editor
* Documentation for all the changes listed above.
This fixes#49261, which was happening because of a deadlock in the resolver mutex. There was leftover old mutex code and it's all be converted to new MutexLock class now.
In this PR:
- Removed rset
- rpc_config can now optionally configure transfer mode
(reliable/unreliable/ordered) and channel (channels are not actually
implemented yet.)
- Refactor how the RPC id is computed to minimize the logic in Node and
scripts that now only needs a single `get_rpc_methods` function.
Add two new functions to the IP class that returns all addresses/aliases associated with a given address.
This is a cherry-pick merge from 010a3433df which was merged in 2.1, and has been updated to build with the latest code.
This merge adds two new methods IP.resolve_hostname_addresses and IP.get_resolve_item_addresses that returns a List of all addresses returned from the DNS request.
* Shader compilation is now cached. Subsequent loads take less than a millisecond.
* Improved game, editor and project manager startup time.
* Editor uses .godot/shader_cache to store shaders.
* Game uses user://shader_cache
* Project manager uses $config_dir/shader_cache
* Options to tweak shader caching in project settings.
* Editor path configuration moved from EditorSettings to new class, EditorPaths, so it can be available early on (before shaders are compiled).
* Reworked ShaderCompilerRD to ensure deterministic shader code creation (else shader may change and cache will be invalidated).
* Added shader compression with SMOLV: https://github.com/aras-p/smol-v
Changes passing of current_tree from a member variable to a function argument, making bugs due to stale state less likely.
Fix a bug in deactivate where current_tree variable was stale. This may have resulted in visual anomalies.
Fixes#34541
Renamed MAX_DIGITS to MAX_DECIMALS, since it only changes the
amount of digits after the decimal point.
Increased MAX_DECIMALS to 32, and made String::num use
MAX_DECIMALS consistently. If -1 is passed as
decimal precision to String::num, it now gets changed to
the correct precision based on the number's magnitude,
instead of using printf default(which is 6)
String::num_real also calculates the correct precision now.
Also made the types used in floating-point math more
consistent in a few places.
- Tweak the setting property hint to be more informative.
- Make the setting a "basic" setting so it appears when Advanced Settings
is disabled.
- Remove redundant orientation setting in the iOS export preset.
The project setting is now used (like on Android).
Projects upgrading from a previous version will have to set the
screen orientation again in the Project Settings if it wasn't set
to the default value ("landscape").
Default missing keys to Unix time 0 (1970-01-01 at 00:00:00 UTC).
Abort if year <= 0, this is not supported by the current algorithm.
Prevents an infinite loop further down.
Fixes#49022.
This also acts as a general-purpose "deselect" shortcut since pressing
it a second time will deselect text.
This is available both in the script editor and in TextEdit fields
in use, both in the editor and projects.
The Duplicate Line script editor shortcut was moved to Ctrl + Shift + D
since it conflicts with the new shortcut (Ctrl + D). The rationale for
doing so is that Duplicate Line is a less commonly used action, and
its behavior can be replicated by copying and pasting the current line
anyway. (With no selection active, the whole line will be copied.)
The code is based on the current version of thirdparty/vhacd and modified to use Godot's types and code style.
Additional changes:
- extended PagedAllocator to allow leaked objects
- applied patch from https://github.com/bulletphysics/bullet3/pull/3037
This changes the types of a big number of variables.
General rules:
- Using `uint64_t` in general. We also considered `int64_t` but eventually
settled on keeping it unsigned, which is also closer to what one would expect
with `size_t`/`off_t`.
- We only keep `int64_t` for `seek_end` (takes a negative offset from the end)
and for the `Variant` bindings, since `Variant::INT` is `int64_t`. This means
we only need to guard against passing negative values in `core_bind.cpp`.
- Using `uint32_t` integers for concepts not needing such a huge range, like
pages, blocks, etc.
In addition:
- Improve usage of integer types in some related places; namely, `DirAccess`,
core binds.
Note:
- On Windows, `_ftelli64` reports invalid values when using 32-bit MinGW with
version < 8.0. This was an upstream bug fixed in 8.0. It breaks support for
big files on 32-bit Windows builds made with that toolchain. We might add a
workaround.
Fixes#44363.
Fixesgodotengine/godot-proposals#400.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
- Removes the undesired spaces before the colon
- Adds missing commas between parameters
- Adds quotes or brackets to strings
- Removes brackets around single values
Port lawnjelly's dynamic BVH implementation from 3.x to be used in
both 2D and 3D broadphases.
Removed alternative broadphase implementations which are not meant to be
used anymore since they are much slower.
Includes changes in Rect2, Vector2, Vector3 that help with the template
implementation of the dynamic BVH by uniformizing the interface between
2D and 3D math.
Co-authored-by: lawnjelly <lawnjelly@gmail.com>
- Move most properties from TileMap to TileSet,
- Make TileSet more flexible, supporting more feature (several
collision layers, etc...),
- Fusion both the TileMap and TileSet editor,
- Implement TileSetSources, and thus a new way to index tiles in the TileSet,
- Rework the TileSet and TileMap editors completely,
- Implement an editor zoom widget (and use it in several places)
This can be used to tell Godot to run an executable that will run Godot
rather than running Godot directly. This is useful to make Godot start
on the dedicated GPU when using a NVIDIA Optimus setup on Linux:
`prime-run %command%`
The `editor/run/main_run_args` setting declaration was moved to make it
visible in the ProjectSettings documentation.
Fixes#48420, fixes#48421.
The binding was missed when moving GDScript built-in to Global Scope it seems.
Co-authored-by: kleonc <9283098+kleonc@users.noreply.github.com>