For clarity, assign-to-release idiom for PoolVector::Read/Write
replaced with a function call.
Existing uses replaced (or removed if already handled by scope)
Reasoning: ID is not an acronym, it is simply short for identification, so it logically should not be capitalized. But even if it was an acronym, other acronyms in Godot are not capitalized, like p_rid, p_ip, and p_json.
Adds the ability to directly add disabled shapes to a collision object. Before this commit a shape has always been assumed to be enabled and had to be disabled in an extra step.
It seems to stay compatible with formatting done by clang-format 6.0 and 7.0,
so contributors can keep using those versions for now (they will not undo those
changes).
With this change finally one can use compound collisions (like those created
by Gridmaps) without serious performance issues. The previous KinematicBody
code for Bullet was practically doing a whole bunch of unnecessary
calculations. Gridmaps with fairly large octant sizes (in my case 32) can get
up to 10000x speedup with this change (literally!). I expect the FPS demo to
get a fair speedup as well.
List of fixes and improvements:
- Fixed a general bug in move_and_slide that affects both GodotPhysics and
Bullet, where ray shapes would be ignored unless the stop_on_slope parameter
is disabled. Not sure where that came from, but looking at the 2D physics
code it was obvious there's a difference.
- Enabled the dynamic AABB tree that Bullet uses to allow broadphase collision
tests against individual shapes of compound shapes. This is crucial to get
good performance with Gridmaps and in general improves the performance
whenever a KinematicBody collides with compound collision shapes.
- Added code to the broadphase collision detection code used by the Bullet
module for KinematicBodies to also do broadphase on the sub-shapes of
compound collision shapes. This is possible thanks to the dynamic AABB
tree that was previously disabled and it's the change that provides the
biggest performance boost.
- Now broadphase test is only done once per KinematicBody in Bullet instead of
once per each of its shapes which was completely unnecessary.
- Fixed the way how the ray separation results are populated in Bullet which
was completely broken previously, overwriting previous results and similar
non-sense.
- Fixed ray shapes for good now. Previously the margin set in the editor was
not respected at all, and the KinematicBody code for ray separation was
complete bogus, thus all previous attempts to fix it were mislead.
- Fixed an obvious bug also in GodotPhysics where an out-of-bounds index was
used in the ray result array.
There are a whole set of other problems with the KinematicBody code of Bullet
which cost performance and may cause unexpected behavior, but those are not
addressed in this change (need to keep it "simple").
Not sure whether this fixes any outstanding Github issues but I wouldn't be
surprised.
Fixes the following GCC 7 warnings:
```
core/cowdata.h:269:47: warning: 'alloc_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/error_macros.h:163:26: warning: 'nearest_point' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/image.cpp:1579:5: warning: 'colormap_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/image.cpp:1582:12: warning: 'size_height' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/image.cpp:1590:23: warning: 'size_width' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/image.cpp:1599:29: warning: 'pixel_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/math/face3.cpp:207:15: warning: 'tri_max' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/math/face3.cpp:209:15: warning: 'tri_min' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gles3/rasterizer_scene_gles3.cpp:665:22: warning: 'best_used_frame' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gles3/rasterizer_storage_gles3.cpp:865:27: warning: 'blit_target' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gles3/rasterizer_storage_gles3.cpp:980:29: warning: 'blit_target' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gles3/shader_gles3.h:122:9: warning: '<anonymous>.ShaderGLES3::Version::frag_id' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gles3/shader_gles3.h:122:9: warning: '<anonymous>.ShaderGLES3::Version::id' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gles3/shader_gles3.h:122:9: warning: '<anonymous>.ShaderGLES3::Version::vert_id' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/plugins/script_editor_plugin.cpp:1980:31: warning: 'se' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/scene_tree_dock.cpp:840:30: warning: 'new_node' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4259:9: warning: 'a1' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4259:9: warning: 'lll' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4259:9: warning: 'lul' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4260:9: warning: 'a2' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4261:9: warning: 'a3' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4265:3: warning: 'enable_lin' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4294:3: warning: 'enable_ang' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4311:34: warning: 'll' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4311:34: warning: 'ul' may be used uninitialized in this function [-Wmaybe-uninitialized]
scene/3d/voxel_light_baker.cpp:1655:47: warning: 'cone_dirs' may be used uninitialized in this function [-Wmaybe-uninitialized]
scene/3d/voxel_light_baker.cpp:1656:73: warning: 'cone_weights' may be used uninitialized in this function [-Wmaybe-uninitialized]
scene/gui/texture_progress.cpp:181:6: warning: 'cp' may be used uninitialized in this function [-Wmaybe-uninitialized]
scene/gui/texture_progress.cpp:181:6: warning: 'cq' may be used uninitialized in this function [-Wmaybe-uninitialized]
servers/physics/shape_sw.cpp:1056:19: warning: 'support_max' may be used uninitialized in this function [-Wmaybe-uninitialized]
```
Namely:
[-Wunneeded-internal-declaration]
[-Wunused-comparison]
[-Wunused-const-variable]
[-Wunused-function]
[-Wunused-private-fields]
Fixes the following Clang 7 warnings:
```
editor/plugins/script_editor_plugin.cpp:1417:20: warning: function '_find_node_with_script' is not needed and will not be emitted [-Wunneeded-internal-declaration]
editor/scene_tree_dock.cpp:1859:14: warning: function '_find_last_visible' is not needed and will not be emitted [-Wunneeded-internal-declaration]
modules/gdscript/gdscript_parser.cpp:7838:19: warning: equality comparison result unused [-Wunused-comparison]
scene/resources/mesh.cpp:549:35: warning: unused variable '_array_types' [-Wunused-const-variable]
scene/resources/mesh.cpp:563:18: warning: unused variable '_format_translate' [-Wunused-const-variable]
drivers/gles3/rasterizer_scene_gles3.cpp:54:28: warning: unused function 'store_transform2d' [-Wunused-function]
core/io/file_access_network.h:50:6: warning: private field 'ml' is not used [-Wunused-private-field]
core/io/file_access_zip.h:93:14: warning: private field 'archive' is not used [-Wunused-private-field]
core/io/resource_format_binary.h:122:6: warning: private field 'bin_meta_idx' is not used [-Wunused-private-field]
core/message_queue.h:47:9: warning: private field 'mutex' is not used [-Wunused-private-field]
main/tests/test_gui.cpp:63:11: warning: private field 'control' is not used [-Wunused-private-field]
modules/gdscript/gdscript_parser.h:558:7: warning: private field 'completion_static' is not used [-Wunused-private-field]
platform/x11/os_x11.h:148:11: warning: private field 'ip_unix' is not used [-Wunused-private-field]
platform/x11/os_x11.h:180:7: warning: private field 'net_wm_icon' is not used [-Wunused-private-field]
platform/x11/os_x11.h:189:6: warning: private field 'audio_driver_index' is not used [-Wunused-private-field]
platform/x11/os_x11.h:190:15: warning: private field 'capture_idle' is not used [-Wunused-private-field]
servers/physics/body_pair_sw.h:79:6: warning: private field 'cc' is not used [-Wunused-private-field]
servers/visual/visual_server_raster.h:62:7: warning: private field 'draw_extra_frame' is not used [-Wunused-private-field]
```
Fixes the following GCC 5 warnings:
```
core/object.h:193:11: warning: 'MethodInfo::flags' will be initialized after [-Wreorder]
core/object.h:192:15: warning: 'PropertyInfo MethodInfo::return_val' [-Wreorder]
core/object.cpp:278:1: warning: when initialized here [-Wreorder]
core/script_debugger_remote.h:97:6: warning: 'ScriptDebuggerRemote::max_cps' will be initialized after [-Wreorder]
core/script_debugger_remote.h:91:6: warning: 'int ScriptDebuggerRemote::max_messages_per_frame' [-Wreorder]
core/script_debugger_remote.cpp:1086:1: warning: when initialized here [-Wreorder]
core/script_debugger_remote.h:98:6: warning: 'ScriptDebuggerRemote::char_count' will be initialized after [-Wreorder]
core/script_debugger_remote.h:92:6: warning: 'int ScriptDebuggerRemote::n_messages_dropped' [-Wreorder]
core/script_debugger_remote.cpp:1086:1: warning: when initialized here [-Wreorder]
modules/bullet/area_bullet.h:102:7: warning: 'AreaBullet::isScratched' will be initialized after [-Wreorder]
modules/bullet/area_bullet.h:92:39: warning: 'PhysicsServer::AreaSpaceOverrideMode AreaBullet::spOv_mode' [-Wreorder]
modules/bullet/area_bullet.cpp:46:1: warning: when initialized here [-Wreorder]
modules/bullet/collision_object_bullet.h:127:15: warning: 'CollisionObjectBullet::space' will be initialized after [-Wreorder]
modules/bullet/collision_object_bullet.h:117:7: warning: 'CollisionObjectBullet::Type CollisionObjectBullet::type' [-Wreorder]
modules/bullet/collision_object_bullet.cpp:67:1: warning: when initialized here [-Wreorder]
modules/bullet/godot_ray_world_algorithm.h:48:7: warning: 'GodotRayWorldAlgorithm::m_ownManifol1d' will be initialized after [-Wreorder]
modules/bullet/godot_ray_world_algorithm.h:46:33: warning: 'const btDiscreteDynamicsWorld* GodotRayWorldAlgorithm::m_world' [-Wreorder]
modules/bullet/godot_ray_world_algorithm.cpp:50:1: warning: when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:91:18: warning: 'GodotAllConvexResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:89:6: warning: 'int GodotAllConvexResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:93:2: warning: when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:142:18: warning: 'GodotAllContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:140:6: warning: 'int GodotAllContactResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:147:2: warning: when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:168:18: warning: 'GodotContactPairContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:166:6: warning: 'int GodotContactPairContactResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:173:2: warning: when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:195:18: warning: 'GodotRestInfoContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:191:7: warning: 'bool GodotRestInfoContactResultCallback::m_collided' [-Wreorder]
modules/bullet/godot_result_callbacks.h:199:2: warning: when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:200:9: warning: 'RigidBodyBullet::gravity_scale' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:199:9: warning: 'real_t RigidBodyBullet::mass' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning: when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:222:28: warning: 'RigidBodyBullet::force_integration_callback' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:219:7: warning: 'bool RigidBodyBullet::isTransformChanged' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning: when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:220:7: warning: 'RigidBodyBullet::previousActiveState' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:208:6: warning: 'int RigidBodyBullet::maxCollisionsDetection' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning: when initialized here [-Wreorder]
modules/bullet/soft_body_bullet.h:69:9: warning: 'SoftBodyBullet::total_mass' will be initialized after [-Wreorder]
modules/bullet/soft_body_bullet.h:68:6: warning: 'int SoftBodyBullet::simulation_precision' [-Wreorder]
modules/bullet/soft_body_bullet.cpp:38:1: warning: when initialized here [-Wreorder]
modules/bullet/soft_body_bullet.h:76:9: warning: 'SoftBodyBullet::drag_coefficient' will be initialized after [-Wreorder]
modules/bullet/soft_body_bullet.h:61:14: warning: 'btSoftBody* SoftBodyBullet::bt_soft_body' [-Wreorder]
modules/bullet/soft_body_bullet.cpp:38:1: warning: when initialized here [-Wreorder]
modules/bullet/space_bullet.h:97:22: warning: 'SpaceBullet::solver' will be initialized after [-Wreorder]
modules/bullet/space_bullet.h:95:35: warning: 'btDefaultCollisionConfiguration* SpaceBullet::collisionConfiguration' [-Wreorder]
modules/bullet/space_bullet.cpp:333:1: warning: when initialized here [-Wreorder]
modules/bullet/space_bullet.h:101:23: warning: 'SpaceBullet::soft_body_world_info' will be initialized after [-Wreorder]
modules/bullet/space_bullet.h:99:23: warning: 'btGhostPairCallback* SpaceBullet::ghostPairCallback' [-Wreorder]
modules/bullet/space_bullet.cpp:333:1: warning: when initialized here [-Wreorder]
modules/gdnative/nativescript/nativescript.h:79:13: warning: 'NativeScriptDesc::base_native_type' will be initialized after [-Wreorder]
modules/gdnative/nativescript/nativescript.h:73:9: warning: 'String NativeScriptDesc::documentation' [-Wreorder]
modules/gdnative/nativescript/nativescript.h:88:9: warning: when initialized here [-Wreorder]
modules/gdscript/gdscript.h:296:6: warning: 'GDScriptWarning::line' will be initialized after [-Wreorder]
modules/gdscript/gdscript.h:294:4: warning: 'GDScriptWarning::Code GDScriptWarning::code' [-Wreorder]
modules/gdscript/gdscript.h:303:2: warning: when initialized here [-Wreorder]
scene/3d/physics_body.h:544:7: warning: 'PhysicalBone::simulate_physics' will be initialized after [-Wreorder]
scene/3d/physics_body.h:543:7: warning: 'bool PhysicalBone::_internal_static_body' [-Wreorder]
scene/3d/physics_body.cpp:2502:1: warning: when initialized here [-Wreorder]
scene/3d/physics_body.h:546:6: warning: 'PhysicalBone::bone_id' will be initialized after [-Wreorder]
scene/3d/physics_body.h:539:12: warning: 'Skeleton* PhysicalBone::parent_skeleton' [-Wreorder]
scene/3d/physics_body.cpp:2502:1: warning: when initialized here [-Wreorder]
scene/3d/spring_arm.h:44:11: warning: 'SpringArm::mask' will be initialized after [-Wreorder]
scene/3d/spring_arm.h:43:8: warning: 'float SpringArm::current_spring_length' [-Wreorder]
scene/3d/spring_arm.cpp:37:1: warning: when initialized here [-Wreorder]
scene/animation/skeleton_ik.h:159:11: warning: 'SkeletonIK::target_node_override' will be initialized after [-Wreorder]
scene/animation/skeleton_ik.h:152:7: warning: 'bool SkeletonIK::use_magnet' [-Wreorder]
scene/animation/skeleton_ik.cpp:418:1: warning: when initialized here [-Wreorder]
scene/resources/tile_set.h:84:9: warning: 'TileSet::AutotileData::size' will be initialized after [-Wreorder]
scene/resources/tile_set.h:83:7: warning: 'int TileSet::AutotileData::spacing' [-Wreorder]
scene/resources/tile_set.h:92:12: warning: when initialized here [-Wreorder]
scene/resources/tile_set.h:115:12: warning: 'TileSet::TileData::tile_mode' will be initialized after [-Wreorder]
scene/resources/tile_set.h:114:9: warning: 'Color TileSet::TileData::modulate' [-Wreorder]
scene/resources/tile_set.h:120:12: warning: when initialized here [-Wreorder]
servers/physics/body_sw.h:84:19: warning: 'BodySW::direct_state_query_list' will be initialized after [-Wreorder]
servers/physics/body_sw.h:57:11: warning: 'uint16_t BodySW::locked_axis' [-Wreorder]
servers/physics/body_sw.cpp:756:1: warning: when initialized here [-Wreorder]
```
Nothing really relevant for us, but it's not a bad consistency
improvement anyway so worth taking.
Fixes GCC 5 warnings of the form:
core/io/http_client.cpp:288:9: warning: enumeration value 'STATUS_SSL_HANDSHAKE_ERROR' not handled in switch [-Wswitch]
core/io/marshalls.cpp:806:9: warning: enumeration value 'AABB' not handled in switch [-Wswitch]
Those can be trivial cases where adding a default fallback is the solution,
or more complex issues/hidden bugs where missed values are actually meant
to be handled.
This allows more consistency in the manner we include core headers,
where previously there would be a mix of absolute, relative and
include path-dependent includes.
The margin value is exposed into the UI for shape ressource.
This value can be modified through set_margin and get from get_margin
or by using the property margin. Each time the margin is modified
the associated collision shape is recreated and the margin value is
used in ShapeBullet::prepare.
This commit makes operator[] on Vector const and adds a write proxy to it. From
now on writes to Vectors need to happen through the .write proxy. So for
instance:
Vector<int> vec;
vec.push_back(10);
std::cout << vec[0] << std::endl;
vec.write[0] = 20;
Failing to use the .write proxy will cause a compilation error.
In addition COWable datatypes can now embed a CowData pointer to their data.
This means that String, CharString, and VMap no longer use or derive from
Vector.
_ALWAYS_INLINE_ and _FORCE_INLINE_ are now equivalent for debug and non-debug
builds. This is a lot faster for Vector in the editor and while running tests.
The reason why this difference used to exist is because force-inlined methods
used to give a bad debugging experience. After extensive testing with modern
compilers this is no longer the case.
Fixes most current reports on Coverity Scan of uninitialized scalar
variable (CWE-457): https://cwe.mitre.org/data/definitions/457.html
These happen most of the time (in our code) when instanciating structs
without a constructor (or with an incomplete one), and later returning
the instance. This is sometimes intended though, as some parameters are
only used in some situations and should not be double-initialized for
performance reasons (e.g. `constant` in ShaderLanguage::Token).
Using `misc/scripts/fix_headers.py` on all Godot files.
Some missing header guards were added, and the header inclusion order
was fixed in the Bullet module.
The point is that `RayCast`s are checked against objects' `collision_layer`(s), but they themselves are considered no to _belong_ to any layer. Therefore, the correct name for their property is `collision_mask`, rather than `collision_layer`.
Only renaming is needed since the behavior was already the right one, only that it wasn't matching what users would expect from the name and description of the property.
Fixes#7589, where it's also discussed.
Rename user facing methods and variables as well as the corresponding
C++ methods according to the folloming changes:
* pos -> position
* rot -> rotation
* loc -> location
C++ variables are left as is.
Since joint resources are created by joint nodes and also they take care of freeing them, the physics server doesn't need to free bodies' joints explicitly.
The logic for clearing the constraints map/set is still relevant as there may be collision pairs and in their case its the server itself the one creating them and therefore releasing them.
Don't abort the loop when one is already released
Remove warning on already-released constraint
Clean up area's contraints as well
Clear the constraint data as well
Do the cleanup as soon as the space changes
-Added new 3D stream player node
-Added ability for Area to capture sound from streams
-Added small features in physics to be able to properly guess distance to areas for sound
-Fixed 3D CollisionObject so shapes are added the same as in 2D, directly from children
-Fixed KinematicBody API to make it the same as 2D.
Added set_scale, set_rotation_euler, set_rotation_axis_angle. Addresses #2565 directly.
Added an euler angle constructor for Basis in GDScript and also exposed is_normalized for vectors and quaternions.
Various other changes mostly cosmetic in nature.
I can show you the code
Pretty, with proper whitespace
Tell me, coder, now when did
You last write readable code?
I can open your eyes
Make you see your bad indent
Force you to respect the style
The core devs agreed upon
A whole new world
A new fantastic code format
A de facto standard
With some sugar
Enforced with clang-format
A whole new world
A dazzling style we all dreamed of
And when we read it through
It's crystal clear
That now we're in a whole new world of code
- Add FIXME tags comments to some unfixed potential bugs
- Remove some checks (always false: unsigned never < 0)
- Fix some if statements based on reviews.
- Bunch of missing `else` statements
This is a continuation of an on-going work for 64-bit floating point builds, started in PR #7528. Covers physics, physics/joints and physics_2d code.
Also removed matrixToEulerXYZ function in favor of Basis::get_euler.
