* Added option for importers to show an Advanced settings dialog
* Created advanced settings dialog for Scene Importer
* Cleaned up importers (remove many old/unused options)
* Added the ability to customize every node, material, mesh and animation individually
* Saving to animations and meshes to files is now a manual process, making it more predictable
* Added the ability for materials to be replaced by external files (or to be made external, up to you).
* When doubleclicking an impoted scene in the filesystem dock, it automatically shows the import settings instead of asking to open it.
WARNING: Lightmap UV unwrap is not working, it needs to be re-made.
Keyframe times shift slowly in imported animations, starting with a zero shift
at the beginning and increasing and becoming erratic slowly farther into an
animation, reaching significant levels at times after about 3 minutes into an
animation. This commit fixes the issue by increasing the precision of the
floating point numbers used for keyframe time calculations. Only the most
significant cases that cause fast accumulation of errors over a short animation
duration are fixed. Other cases that would have a marginal benefit from
switching to double precision numbers are left for another PR/further analysis.
Note that this change has no impact on the runtime performance of games/apps
created using Godot. It only affects the GLTF importer.
Fixes#47127.
Helps a lot with soft bodies and generally useful to avoid shapes to go
through the ground in certain cases.
Added an option in ConcavePolygonShape to re-enable backface collision
on specific bodies if needed.
- Fixed SoftBody surface update with new rendering system
- Added GodotPhysics implementation for SoftBody
- Added support to get SoftBody rid to interact with the physics server
- Added support to get SoftBody bounds from the physics server
- Removed support for unused get_vertex_position and get_point_offset
from the physics server
- Removed SoftBody properties that are unused in both Bullet and
GodotPhysics (angular and volume stiffness, pose matching)
- Added RenderingServerHandler interface to PhysicsServer3D so the physics servers don't need to reference the class from SoftBody node directly
- Added new_copy to all types, since trivial copy won't work for all
types.
- Added functions to convert from String to char array types, which is
not provided by the methods bound in Variant.
- Added operator index to String.
- Added missing cstring version of some Variant functions. They existed
in the header but didn't have the implementation and were missing from
the gdnative_api.json file.
- Added support for static calls on Variant types.
This is a tricky one, it used to work, but it was wrong, because in such
a scenario instead of passing NULL as required by the API, it would pass
a buffer containing the `\0` terminator.
This stopped working on a specific miniupnpc version, when they fixed
some network endianess issue on Windows, to which we made a workaround,
which in turn would probably result in failures when the interface is
specified.
This commit address the issue properly, by checking the specified
interface string size, and correctly passing NULL instead of the empty
string when necessary.
Also reverts the commit that introduced the bogus workaround:
e85330231c
One of those PR when the explaination is much longer then code changes
:).
The following two bugs were fixed:
- For classes without namespace we were still generating `namespace {`
without a namespace identifier, causing a syntax error.
- For classes with nested namespaces we were generating only the innermost
part of the namespace was being generated, e.g.: for `Foo.Bar` we were
generating `namespace Bar {` instead of `namespace Foo.Bar {`.
This wasn't causing any build error, but because of the wrong namespace
Godot wasn't able to find the class associated with the script.
- `Texture::~Texture` expects `props` to be dynamically allocated.
- `GetPropertyTable` returned a pointer to an existing `PropertyTable`
but is expected to return a newly, dynamically allocated one.
- `PropertyTable::PropertyTable()` suggests that an empty `element`
property is valid.
fix#46876fix#45573
This source generator adds a newly introduced attribute,
`ScriptPath` to all classes that:
- Are top-level classes (not inner/nested).
- Have the `partial` modifier.
- Inherit `Godot.Object`.
- The class name matches the file name.
A build error is thrown if the generator finds a class that meets these
conditions but is not declared `partial`, unless the class is annotated
with the `DisableGodotGenerators` attribute.
We also generate an `AssemblyHasScripts` assembly attribute which Godot
uses to get all the script classes in the assembly, eliminating the need
for Godot to search them. We can also avoid searching in assemblies that
don't have this attribute. This will be good for performance in the
future once we support multiple assemblies with Godot script classes.
This is an example of what the generated code looks like:
```
using Godot;
namespace Foo {
[ScriptPathAttribute("res://Player.cs")]
// Multiple partial declarations are allowed
[ScriptPathAttribute("res://Foo/Player.cs")]
partial class Player {}
}
[assembly:AssemblyHasScripts(new System.Type[] { typeof(Foo.Player) })]
```
The new attributes replace script metadata which we were generating by
determining the namespace of script classes with a very simple parser.
This fixes several issues with the old approach related to parser
errors and conditional compilation.
It also makes the task part of the MSBuild project build, rather than
a separate step executed by the Godot editor.
When this code was changed for 4.0, a "break" statement inside a for loop in 3.x was changed to "return".
This means that the two special cases (autoloads and input actions) are never checked.
Removing the return lets these work properly in the editor.
(Also reorder conditionals to short-circuit and avoid expensive methods.)
- Based on C++11's `atomic`
- Reworked `SafeRefCount` (based on the rewrite by @hpvb)
- Replaced free atomic functions by the new `SafeNumeric<T>`
- Replaced wrong cases of `volatile bool` by the new `SafeFlag`
- Platform-specific implementations no longer needed
Co-authored-by: Hein-Pieter van Braam-Stewart <hp@tmm.cx>
This removes hardcoded actions from things like LineEdit and TextEdit.
Previously, things like copy, paste, etc were all hardcoded to Ctrl+C, Ctrl+V, etc. They could not be changed. This allows the possibility of them being changed, by making them use the action map. This has the added benefit of greatly simplifying the input handling logic in those controls. The logic which was previously in a huge and hard to follow switch statement has been extracted to individual methods.
-Advanced Settings toggle also hides advanced properties when disabled
-Simplified Advanced Bar (errors were just plain redundant)
-Reorganized rendering quality settings.
-Reorganized miscelaneous settings for clean up.
-Added a new method in Resource: reset_state , used for reloading the same resource from disk
-Added a new cache mode "replace" in ResourceLoader, which reuses existing loaded sub-resources but resets their data from disk (or replaces them if they chaged type)
-Because the correct sub-resource paths are always loaded now, this fixes bugs with subresource folding or subresource ordering when saving.
-For inspector refresh, the inspector now detects if a property change by polling a few times per second and then does update the control if so. This process is very cheap.
-For property list refresh, a new signal (property_list_changed) was added to Object. _change_notify() is replaced by notify_property_list_changed()
-Changed all objects using the old method to the signal, or just deleted the calls to _change_notify(<property>) since they are unnecesary now.
-Rendering server now uses a split RID allocate/initialize internally, this allows generating RIDs immediately but initialization to happen later on the proper thread (as rendering APIs generally requiere to call on the right thread).
-RenderingServerWrapMT is no more, multithreading is done in RenderingServerDefault.
-Some functions like texture or mesh creation, when renderer supports it, can register and return immediately (so no waiting for server API to flush, and saving staging and command buffer memory).
-3D physics server changed to be made multithread friendly.
-Added PhysicsServer3DWrapMT to use 3D physics server from multiple threads.
-Disablet Bullet (too much effort to make multithread friendly, this needs to be fixed eventually).
- Add indexed type to the builtin types output, which is useful for
bindings implementing array-like access.
- Use getter type instead of hint for property types, as the hint can be
unreliable and include multiple comma-separated possible types.
- Moved Variant struct definition to its own file so it can be used
without include cycles (like on Dictionary).
- Add `index` operator function so bindings like C++ can implement the
operator[] overload (which needs a reference to the actual value).
- Added missing new/destroy functions to Vector3i array.
- Added print error/warning functions as helpers so bindings can print
messages in the same manner as Godot itself does.
Inverted the spotlight angle attenuation so a higher value results in
a dimmer light, this makes it more consistent with the distance
attenuation.
Also changed the way spotlighs are computed in SDFGI
and GIPorbes and GPU lightmapper, now it matches the falloff used in the scene rendering
code.
Which can be used by language bindings to generate code statically. This
is generated as a different file from the class API because it has
different requirements (the builtin types have constructors and don't
have signals), so bindings can better make use of each JSON file without
extra parsing.
This also cleans up a bit the old API generator, mainly initializing
structs and renaming "instanciable" to the more correct "instantiable".
The argument description in help text was updated to better reflect how
it should be used. The <path> argument is mandatory.
- Based on C++11's `thread` and `thread_local`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed (except for the few cases of non-portable functions)
- Simpler for `NO_THREADS`
- Thread ids are now the same across platforms (main is 1; others follow)
- fixes scale values of 0.0013 (det == 0.00004) not rendering, they should render even at small values, but not at zero like the editor grid plugin supplies zero exactly.
- fixes node_3d_editor_plugin visibility bug when scale is zero
- fix culling with small scaling values - which are still valid to be rendered like 0.00004
note: grid is still not fixed, it has det == 0 issues but this fixes one of them.
Named color constants renamed to UPPERCASE. Unlike #41019, this PR
is complete and implements these changes in the simplest way possible.
Co-authored-by: Shivam Mukherjee <mshivam98@gmail.com>
-Removed sync to draw, now everything syncs to draw by default.
-Fixed many validation layer errors.
-Added support for VkImageViewUsageCreateInfo to fix validation layer warnings.
-Texture, buffer, raster and compute functions now all allow spcifying which barriers will be used.
This API now uses the discovery functions present in Variant instead of
wrapping every built-in function. Users now need to query for function
pointers and use those.
The ClassDB tests will detect when the core API has dependencies on
the editor API, which is not allowed.
This should prevent or warn early about issues like #44856
The previous RGBA format included unused RGB data. Using the LA8 format
removes the need to store the extra data.
The Docs have been updated to reflect the format changes.
limitations:
- always has to use generated normal's.
- some animations won't be compatible (yet)
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
