* Added a new macro SNAME() that constructs and caches a local stringname.
* Subsequent usages use the cached version.
* Since these use a global static variable, a second refcounter of static usages need to be kept for cleanup time.
* Replaced all theme usages by this new macro.
* Replace all signal emission usages by this new macro.
* Replace all call_deferred usages by this new macro.
This is part of ongoing work to optimize GUI and the editor.
Now static body is used for moving platforms through kinematic motion
property, so sync to physics needs to be in StaticBody2D instead of
CharacterBody2D.
Constant kinematic motion is also supported in combination with sync to
physics for smoother movements.
Fixing by applying the movement in two steps, first the platform
movement, and then the body movement. Plus, add the platform movement
when we are on_wall.
* there is now a more clear distinction between camera_2d and camera_3d functions in the engine code
* simplified camera2d's exported interface - now everything happens directly with the 'current' variable and make_current and clear_current are no longer exposed- there were some situations where calling one instead of set_current would result in incomplete results
* rebased to current godot master
More accurate unsafe motion calculation
* Safe and unsafe motion are calculated by dichotomy with a limited
number of steps. It's good for performance, but on long motions that
either collide near the beginning or near the end, the result can be
very imprecise.
* Now a factor 0.25 or 0.75 is used to converge faster when this case
happens, which allows longer motions to get more accurate collision
detection.
* Makes snap collision more precise, and helps with cases where diagonal collision on the border of a platform can lead to the character being stuck.
Additional improvements to move_and_slide:
* Handle slide canceling in move_and_collide with 0 velocity instead of
not applying it.
* Better handling of snap with custom logic to cancel sliding.
* Remove small jittering when using stop on slope, by canceling the
motion completely when the resulting motion is less than margin instead
of always projecting to the up direction (in both body motion and snap).
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
New property disable_mode to set different behaviors:
Remove: remove from physics simulation
MakeStatic: change body mode to static (doesn't affect area and soft body)
KeepActive: do nothing
Extra change:
Handle disable/enable node state with specific notifications, in order
to differentiate global pause from disabled nodes.
* Functions to convert to/from degrees are all gone. Conversion is done by the editor.
* Use PROPERTY_HINT_ANGLE instead of PROPERTY_HINT_RANGE to edit radian angles in degrees.
* Added possibility to add suffixes to range properties, use "min,max[,step][,suffix:<something>]" example "0,100,1,suffix:m"
* In general, can add suffixes for EditorSpinSlider
Not covered by this PR, will have to be addressed by future ones:
* Ability to switch radians/degrees in the inspector for angle properties (if actually wanted).
* Animations previously made will most likely break, need to add a way to make old ones compatible.
* Only added a "px" suffix to 2D position and a "m" one to 3D position, someone needs to go through the rest of the engine and add all remaining suffixes.
* Likely also need to track down usage of EditorSpinSlider outside properties to add suffixes to it too.
Make sure the direction of the motion is preserved, unless the depth is
higher than the margin, which means the body needs depenetration in any
direction.
Also changed move_and_slide to avoid sliding on the first motion, in
order to avoid issues with unstable position on ground when jumping.
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
* Renames for 2D and 3D
* Class name was confusing, given both 2D and 3D have a "visible" property that is unrelated to actual on-screen visibility.
* New name makes it clear that this is about visibility on screen.
* Works from RenderinServer
* Accurately tells when on or off-scren, its no longer approximate.
* VisibilityEnabler also simplified to use the process mode instead.
This PR and commit adds a new IK system for 2D with the Skeleton2D node
that adds several new IK solvers, a way to control bones in a Skeleton2D
node similar to that in Skeleton3D. It also adds additional changes
and functionality.
This work was sponsored by GSoC 2020 and TwistedTwigleg.
Full list of changes:
* Adds a SkeletonModifier2D resource
* This resource is the base where all IK code is written and executed
* Has a function for clamping angles, since it is so commonly used
* Modifiers are unique when duplicated so it works with instancing
* Adds a SkeletonModifierStack2D resource
* This resource manages a series of SkeletonModification2Ds
* This is what the Skeleton2D directly interfaces with to make IK possible
* Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK
* Each modification is in its own file
* There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together
* Adds a PhysicalBone2D node
* Works similar to the PhysicalBone3D node, but uses a RigidBody2D node
* Changes to Skeleton2D listed below:
* Skeleton2D now holds a single SkeletonModificationStack2D for IK
* Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D
* Changes to Bone2D listed below:
* The default_length property has been changed to length. Length is the length of the bone to its child bone node
* New bone_angle property, which is the angle the bone has to its first child bone node
* Bone2D caches its transform when not modified by IK for IK interpolation purposes
* Bone2D draws its own editor gizmo, though this is stated to change in the future
* Changes to CanvasItemEditor listed below:
* Bone2D gizmo drawing code removed
* The 2D IK code is removed. Now Bone2D is the only bone system for 2D
* Transform2D now has a looking_at function for rotating to face a position
* Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE
* These notifications only are called in the editor right before and after saving a scene
* Needed for not saving the IK position when executing IK in the editor
* Documentation for all the changes listed above.
YSort now has a compatibility alias to Node2D.
Updated TileMap to use the existing Node2D y_sort_enabled property instead
of its own property.
Updated Node2D doc to include the new y_sort_enabled member.
Updated TileMap doc to remove its mention of cell_y_sort.
Deleted YSort doc.
CharacterBody has a linear_velocity property to replace the argument in
move_and_slide.
StaticBody handles reporting linear/angular velocity correctly when
kinematic motion is used (in 3D, used in vehicle and navigation).
Safe margin property on CharacterBody only, used as argument in
move_and_collide.
Removed kinematic_safe_margin in 3D physics server, not really useful
and now harmonized with 2D.
Does the same thing as simulate motion from RigidBody in Kinematic mode,
and CharacterBody (previously KinematicBody).
Added support for constant linear/angular velocity with kinematic_motion
in StaticBody, which moves the body in physics.
Updated documentation for StaticBody and CharacterBody to describe their
functionalities more accurately.
MODE_DYNAMIC instead of MODE_RIGID
MODE_DYNAMIC_LOCKED instead of MODE_CHARACTER
No more special case for sleeping behavior for MODE_DYNAMIC_LOCKED
(MODE_CHARACTER was forcing the body not to sleep, which is redundant
with can_sleep and wasn't done in Bullet).
- snap property to replace move_and_slide_with_snap()
- floor_max_angle, stop_on_slope, infinite_inertia, max_slides,
up_direction properties to replace arguments from move_and_slide()
- up direction now defaults to Vector3.UP and Vector2.UP
PhysicsBody now has methods move_and_collide/test_move and needed
properties for these methods: safe margin, locked axes (3D only).
Moved collision_exceptions from StaticBody to PhysicsBody for 3D
(same as 2D, and conforms to documentation).
RigidBody doesn't have test_motion method anymore, it's now redundant
with PhysicsBody.test_move.
