Same as what is already done for shape queries, applied to point and ray
queries. Easier to document and more flexible to add more parameters.
Also expose intersect_point method to script in 3D.
Remove intersect_point_on_canvas in 2D, replaced with a parameter.
This crash occurred when an audio stream finished playing in NOTIFICATION_INTERNAL_PROCESS,
during which it would iterate through a loop of playbacks,
leading to a "finished" signal, which removed the audio player from the tree
which led to a NOTIFICATION_EXIT_TREE,
which would mutate the array of playbacks while within the above loop.
This moves the signal callback outside of the loop which avoids the crash.
Note: previously, the signal was called multiple times if the same player finishes multiple times in one frame. Now it is at most once per frame.
Affects AudioStreamPlayer, AudioStreamPlayer2D and AudioStreamPlayer3D
Sets `AlignOperands` to `DontAlign`.
`clang-format` developers seem to mostly care about space-based indentation and
every other version of clang-format breaks the bad mismatch of tabs and spaces
that it seems to use for operand alignment. So it's better without, so that it
respects our two-tabs `ContinuationIndentWidth`.
Damping values are now non-negative.
Add new properties linear_damp_mode and angular_damp_mode to set the way
RigidDynamicBody and PhysicalBone (2D & 3D) use damping values.
It can now be Combine (default) to add to the default/areas, or Replace
to override the value completely (current behavior).
The parent `_validate_property()` wasn't called, which led to shadow
properties being visible even if shadows were disabled on a
DirectionalLight3D node.
Fix NavigationObstacle3D to be attached to navigation map - without it
the NavigationObstacle3D is not working.
Replace radius approximation algorithm with simple "radius" property.
* Made the Basis euler orders indexed via enum.
* Node3D has a new rotation_order property to choose Euler rotation order.
* Node3D has also a rotation_mode property to choose between Euler, Quaternion and Basis
Exposing these modes as well as the order makes Godot a lot friendlier for animators, which can choose the best way to interpolate rotations.
The new *Basis* mode makes the (exposed) transform property obsolete, so it was removed (can still be accessed by code of course).
Some split distance properties are unused depending on the
current shadow mode. Also, Blend Splits can only be used if the shadow
mode is PSSM 2 Splits or PSSM 4 Splits.
This also moves the Fade Start property to be located after the
split properties. This avoids intertwining "conditional" properties
with a property that's always available.
The built-in ALPHA in spatial shaders comes pre-set with a per-instance
transparency value. Multiply by it if you want to keep it.
The transparency value of any given GeometryInstance3D is affected by:
- Its new "transparency" property.
- Its own visiblity range when the new "visibility_range_fade_mode"
property is set to "Self".
- Its parent visibility range when the parent's fade mode is
set to "Dependencies".
The "Self" mode will fade-out the instance when reaching the visibility
range limits, while the "Dependencies" mode will fade-in its
dependencies.
Per-instance transparency is only implemented in the forward clustered
renderer, support for mobile should be added in the future.
Co-authored-by: reduz <reduzio@gmail.com>
When emitting stops CPUParticles3D::_set_redraw(bool p_redraw) will set that value to 0 so when you change the amount after that it will actually not update correclty.
This fixes an issue where if it was not emitting when the scene loaded and it start after that the amount is not reflected correclty. This also happened when you checked out the box for emitting in the editor, changed the value of amount and then checked on the box for emitting. With this change if it is emitting during the change it does interrupt the previous particles when you change. The amount and the emit starts from beginning but that is to be expected on an amount of particles change.
Proper logic for changing physics state when disabled and disabled mode
is changed (it was unnecessarily making calls to re-initialize physics).
Extra error handling in soft body implementations to avoid crashes with
invalid mesh.
Update collision_object_3d.cpp
2d modified and UINT32 usage
Proper uINT32max usage
Change the unreacheable return value of shape_find_owner()
This reverts commit 5be98b81428169ba2dd5baecd00f1adfd9260e5c, reversing
changes made to efa3ff6b95.
Change the unreacheable return value of shape_find_owner()
changed from 0 to uint32_max"
This reverts commit c143bb099af2666454f82428a57f2721af60a84d.
Revert "changed from 0 to uint32_max""
This reverts commit 59e94edb9a32edff15f3cb881e6fc394d2aa7f65.
Revert "changed from 0 to uint32_max"
This reverts commit c143bb099af2666454f82428a57f2721af60a84d.
Revert "Revert "changed from 0 to uint32_max"""
This reverts commit c81d1073ec21b4cde4684a6dbd595f3359283bad.
Revert "changed from 0 to uint32_max"
This reverts commit c143bb099af2666454f82428a57f2721af60a84d.
Revert "changed from 0 to uint32_max""
This reverts commit 59e94edb9a32edff15f3cb881e6fc394d2aa7f65.
Revert "Revert "changed from 0 to uint32_max"""
This reverts commit 6dbd972aa5c4580d4f6270ead6c66eea18617f29.
Revert "changed from 0 to uint32_max""
This reverts commit 59e94edb9a32edff15f3cb881e6fc394d2aa7f65.
Revert "Revert "changed from 0 to uint32_max"""
This reverts commit b769ac2d11ad12f02a388d9dad17519f81d9c3b6.
Revert "Revert "Revert "changed from 0 to uint32_max""""
This reverts commit 1e8d84f7ec12da01c3153e08bb8609cf2c6fd58a.
Revert "Revert "Revert "Revert "changed from 0 to uint32_max"""""
This reverts commit 0dc17abefad6d540c18bba7b4df9d8c04e090d0c.
Change the unreacheable return value of shape_find_owner()
When switching the mesh at runtime, the physics server wasn't properly
updated with the new mesh. Now we keep track of the soft body mesh to
make sure everything is properly initialized on pre-draw.
Also cleaned a few things around private methods.
* New track type BLEND_SHAPE
* Blend shapes are imported via this new track type
* Processing is more optimized (no longer relies on variants)
* Modified the Blend Shape API in MeshInstance3D to use indices rather than StringNames (more optimizes)
* Promo: Fixed a small bug in gizmo updating in Node3D that affected performance
Dedicated BlendShape tracks are required for both optimization and eventually implementing them in animation compression.
Fix some typoed names from the doc
Add _index to "index" parameters of *_shape_* signals, this is both in doc and in the template. This makes the code, signature and doc easier to understand
Add method to get Node from the _index params of those signals. This was not as easy to find as one would expect. Putting this information where it is needed will help.
* Animations and Skeletons are now pose-only.
* Rest transform is kept as reference (when it exists) and for IK
* Improves 3D model compatibility (non uniform transforms will properly work, as well as all animations coming from Autodesk products).
* `Animation.TYPE_TRANSFORM3D` track is gone.
* Added POSITION_3D, ROTATION_3D, SCALE_3D tracks.
* GLTF2, Collada, FBX importers will only import the track types found.
* Skeleton3D bone poses are now Pos/Rot/Scale, pose matrix removed.
* AnimationPlayer and AnimationTree animate these tracks separately, only when found.
* Removed BakeReset code, is useless with these changes.
This is the first in a series of commits designed to make the animation system in Godot more useful, which includes:
* Better compatibility with Autodesk products
* Better reusability of animations across models (including retargeting).
* Proper animation compression.
* etc.
*Note* GLTF2 animation saving went broken with this PR, needs to be fixed in a subsequent one.
Added a parameter in test_body_motion to exclude attached objects from
collision, used to avoid collision with all TileMap tiles with moving
platform motion instead of just the one tile the character touches.
Same changes made in 3D for consistency, and handling potential similar
cases.
-Physics servers test body motion use a class to hold parameters instead
of multiple arguments to make it more readable and flexible since there
are many options
-Improved documentation for test body motion and kinematic collision
-Removed read-only properties for body motion results (not handled in
scripts, so they should be get_ methods only instead)
* Usage was always confusing for users
* The ability to generate a pyramid shape was moved to Camera3D
* SpringArm3D now casts using the camera pyramid shape if no shape is supplied.
Convert GLTF Document to use ImporterMeshInstance3D.
Add a GLTFDocument extension list and an extension for converting the importer mesh instance 3d to mesh instance 3d.
Use GLTF module when the editor tools are disabled.
Modified the render server to be less restrictive on matching blend arrays and have more logging.
Misc bugs with multimesh.
Always index the meshes.
Shape metadata was only used to get tile information when colliding with
tilemaps. It's not needed anymore since there's an API in tilemap using
body ids instead.
- More accurate sliding in slopes to keep input direction correct
- More accurate constant speed calculation
- Renamed linear_velocity to motion_velocity for clarity
- General code cleaning and simplifications
_update_kinematic_motion() shouldn't be called in the constructor
It's too early and causes a first call to set the body position to 0.
Then the second call to set the actual position triggers kinematic
motion, colliding with objects on the path to the initial position.
Side effect of sync to physics now enabled by default.
Allows 2D character controller to work without applying gravity when
touching the ground (also more safely in 3D), and collision detection
is more flexible with different safe margin values.
Character body motion changes in 2D and 3D:
-Recovery only for depth > min contact depth to help with collision
detection consistency (rest info could be lost if recovery was too much)
-Adaptive min contact depth (based on margin) instead of space parameter
Extra CharacterBody changes:
-2D: apply changes made in 3D for stop on slope and floor snap that help
fixing some jittering cases
-3D: fix minor inconsistencies in stop on slope and floor snap logic
In case the reference is stored in script, create a new instance to
avoid overriding the previous values.
Otherwise, re-use the reference as before to avoid extra allocations.
RigidDynamicBody modes are replaced with several properties to make their
usage clearer:
-lock_rotation: disable body's rotation (instead of MODE_LOCKED)
-freeze: no gravity or forces (instead of MODE_STATIC and MODE_KINEMATIC)
-freeze_mode: Static (can be only teleported) or Kinematic (can be animated)
Also renamed MODE_DYNAMIC_LOCKED to MODE_DYNAMIC_LINEAR in the physics
servers.
The icon was present in `editor/icons/`, but it was never implemented
in the editor gizmos code.
This also removes some unused gizmo drawing code (overridden methods
that are no longer called anywhere).
With this PR it's possible to add a collision during the Mesh import, directly in editor.
To generate the shape is possible to chose between the following options:
- Decompose Convex: The Mesh is decomposed in one or many Convex Shapes (Using the VHACD library).
- Simple Convex: Is generated a convex shape that enclose the entire mesh.
- Trimesh: Generate a trimesh shape using the Mesh faces.
- Box: Add a primitive box shape, where you can tweak the `size`, `position`, `rotation`.
- Sphere: Add a primitive sphere shape, where you can tweak the `radius`, `position`, `rotation`.
- Cylinder: Add a primitive cylinder shape, where you can tweak the `height`, `radius`, `position`, `rotation`.
- Capsule: Add a primitive capsule shape, where you can tweak the `height`, `radius`, `position`, `rotation`.
It's also possible to chose the generated body, so you can create:
- Rigid Body
- Static Body
- Area
Changes:
-Added support for custom inertia and center of mass in 3D
-Added support for custom center of mass in 2D
-Calculated center of mass from shapes in 2D (same as in 3D)
-Fixed mass properties calculation with disabled shapes in 2D/3D
-Removed first_integration which is not used in 2D and doesn't seem to
make a lot of sense (prevents omit_force_integration to work during the
first frame)
-Support for custom inertia on different axes for RigidBody3D
Instead of having a physics node named Static that can be either Static
or Kinematic, AnimatableBody is added again as a separate node:
-Inherited from StaticBody to make its usage clearer
-Still separated from CharacterBody to make its usage more focused
Properly implemented constant velocity for kinematic bodies in godot
physics servers (induced velocity without actually moving).
Also updated description for the different physics nodes to make their
usage clearer.
With this PR it's possible to add a collision during the Mesh import, directly in editor.
To generate the shape is possible to chose between the following options:
- Decompose Convex: The Mesh is decomposed in one or many Convex Shapes (Using the VHACD library).
- Simple Convex: Is generated a convex shape that enclose the entire mesh.
- Trimesh: Generate a trimesh shape using the Mesh faces.
- Box: Add a primitive box shape, where you can tweak the `size`, `position`, `rotation`.
- Sphere: Add a primitive sphere shape, where you can tweak the `radius`, `position`, `rotation`.
- Cylinder: Add a primitive cylinder shape, where you can tweak the `height`, `radius`, `position`, `rotation`.
- Capsule: Add a primitive capsule shape, where you can tweak the `height`, `radius`, `position`, `rotation`.
It's also possible to chose the generated body, so you can create:
- Rigid Body.
- Static Body.
- Area.
Use a C++ callback instead of Callable for synchronizing physics nodes' state with physics servers.
Remove usage of PhysicsDirectBodyState in physics nodes when not
necessary.
Store PhysicsDirectBodyState for bodies individually instead of a
singleton to avoid issues when accessing direct body state for multiple
bodies.
PhysicsDirectBodyState is initialized only when needed, so it doesn't
have to be created when using the physics server directly.
Move PhysicsDirectBodyState2D and PhysicsDirectBodyState3D to separate
cpp files.
Make separation ray shapes work properly in move_and_slide, wihtout the
specific code in CharacterBody like before.
Now most of the logic is handled inside the physics server. The only
thing that's needed is to use ray shapes only for recovery and ignore
them when performing the motion itself (unless we're snapping or slips
on slope is on).
Improves stop on slopes, sliding on walls and gravity handling by
porting existing changes from CharacterBody2D to CharacterBody3D.
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
* Allows calling into native extensions directly with a pointer
* Makes it easier to implement some APIs more efficiently
* Appears with a "*" in the documentation for the argument.
* Implementing the pointer handling is entirely up to the implementation, although the extension API provides some hint.
* AudioStream has been implemented as an example, allowing to create NativeExtension based AudioStreams.
* `_gui_input`, `_input`, `_unhandled_input` and `_unhandled_key_input` are now regular C++ virutal functions.
* Everything else converted to GDVIRTUAL
* BIND_VMETHOD is gone, always use the new syntax from now on.
Creating `_gui_input` method and using the binder to register events will no longer work, simply override the virtual function now.
This commit adds quite a chunk of modifications to particles
- particle (value + randomness) now use min and max instead
- passing a curveXYZtexture is now possible and will scale particles per-axis
- CPUParticle3D have an optional parameter to split the scale curve per-axis
* New syntax is type safe.
* New syntax allows for type safe virtuals in native extensions.
* New syntax permits extremely fast calling.
Note: Everything was replaced where possible except for `_gui_input` `_input` and `_unhandled_input`.
These will require API rework on a separate PR as they work different than the rest of the functions.
Added a new method flag METHOD_FLAG_OBJECT_CORE, used internally. Allows to not dump the core virtuals like `_notification` to the json API, since each language will implement those as it is best fits.
OmniLight3D:
* Fixed lack of precision in cube map mode by scaling the projection's
znear.
* Fixed aliasing issues by making the paraboloids use two square regions instead of two half
squares.
* Fixed shadowmap atlas bleeding by adding padding.
* Fixed sihadow blur's inconsistent radius and unclamped sampling.
SpotLight3D:
* Fixed lack of precision by scaling the projection's znear.
* Fixed normal biasing.
Both:
* Tweaked biasing to make sure it works out of the box in most situations.
Tentative fix for missing bones when bones are not sorted as expected.
For example, if the root comes last, all child bones are removed and
the skeleton ends up with just the root.
Changes:
- Rename few methods/property and group them in the editor when it's possible
- Make MotionResult API consistency with KinematicCollision
- Return a boolean in move_and_slide if there was a collision
- New methods:
- get_floor_angle on CharacterBody to get the floor angle.
- get_angle on KinematicCollision to get the collision angle.
- get_last_slide_collision to quickly get the latest collision of move_and_slide.
This PR and commit adds a new IK system for 3D with the Skeleton3D node
that adds several new IK solvers, as well as additional changes and functionality
for making bone manipulation in Godot easier.
This work was sponsored by GSoC 2020 and TwistedTwigleg
Full list of changes:
* Adds a SkeletonModification3D resource
* This resource is the base where all IK code is written and executed
* Adds a SkeletonModificationStack3D resource
* This node oversees the execution of the modifications and acts as a bridge of sorts for the modifications to the Skeleton3D node
* Adds SkeletonModification3D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK
* Each modification is in it's own file
* Several changes to Skeletons, listed below:
* Added local_pose_override, which acts just like global_pose_override but keeps bone-child relationships intract
* So if you move a bone using local_pose_override, all of the bones that are children will also be moved. This is different than global_pose_override, which only affects the individual bone
* Internally bones keep track of their children. This removes the need of a processing list, makes it possible to update just a few select bones at a time, and makes it easier to traverse down the bone chain
* Additional functions added for converting from world transform to global poses, global poses to local poses, and all the same changes but backwards (local to global, global to world). This makes it much easier to work with bone transforms without needing to think too much about how to convert them.
* New signal added, bone_pose_changed, that can be used to tell if a specific bone changed its transform. Needed for BoneAttachment3D
* Added functions for getting the forward position of a bone
* BoneAttachment3D node refactored heavily
* BoneAttachment3D node is now completely standalone in its functionality.
* This makes the code easier and less interconnected, as well as allowing them to function properly without being direct children of Skeleton3D nodes
* BoneAttachment3D now can be set either using the index or the bone name.
* BoneAttachment3D nodes can now set the bone transform instead of just following it. This is disabled by default for compatibility
* BoneAttachment3D now shows a warning when not configured correctly
* Added rotate_to_align function in Basis
* Added class reference documentation for all changes
- Back to 1-based layer names to make it clearer in editor UI
- Layer bit accessors are renamed to layer value and 1-based too
- Uniform errors and documentation in render and physics
- Fix a few remaining collision_layer used in place of collision_mask
This makes it clearer that this property is only about physics FPS,
not rendering FPS.
The `physics_fps` project setting was also renamed to
`physics_ticks_per_second` for consistency.
Infinite inertia:
Not needed anymore, since it's now possible to set one-directional
collision layers in order for characters to ignore rigid bodies, while
rigid bodies still collide with characters.
Ray shapes:
They were introduced as a work around to allow constant speed on slopes,
which is now possible with the new property in CharacterBody instead.
Same thing that was already done in 2D, applies moving platform motion
by using a call to move_and_collide that excludes the platform itself,
instead of making it part of the body motion.
Helps with handling walls and slopes correctly when the character walks
on the moving platform.
Also made some minor adjustments to the 2D version and documentation.
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
When synchronizing CharacterBody motion with moving the platform using
direct body state, only the linear velocity was taken into account.
This change exposes velocity at local point in direct body state and
uses it in move_and_slide to get the proper velocity that includes
rotations.
* Simplified code a lot, bias based on normalized cascade size.
* Lets scale cascades, max distance, etc. without creating acne.
* Fixed normal biasing in directional shadows.
I removed normal biasing in both omni and spot shadows, since the technique can't be easily implemented there.
Will need to be replaced by something else.