In this PR:
- Removed rset
- rpc_config can now optionally configure transfer mode
(reliable/unreliable/ordered) and channel (channels are not actually
implemented yet.)
- Refactor how the RPC id is computed to minimize the logic in Node and
scripts that now only needs a single `get_rpc_methods` function.
The Adaptive text editor theme is the default, and has therefore
been renamed Default for consistency with the Default theme preset.
It keeps its automatic dark/light switch status.
The Default text editor theme was actually a legacy Godot 2-style theme,
so it has been renamed to Godot 2 to match the theme preset.
Its background color has been changed to be a constant opaque color,
since the new editor theme made the theme look less good on a translucent
background. The previous background color on light theme also lacked
contrast.
Fixes#34541
Renamed MAX_DIGITS to MAX_DECIMALS, since it only changes the
amount of digits after the decimal point.
Increased MAX_DECIMALS to 32, and made String::num use
MAX_DECIMALS consistently. If -1 is passed as
decimal precision to String::num, it now gets changed to
the correct precision based on the number's magnitude,
instead of using printf default(which is 6)
String::num_real also calculates the correct precision now.
Also made the types used in floating-point math more
consistent in a few places.
Since there might be tricky cases in the analyzer (in the case of unsafe
lines) which would need to be properly checked again. Instead, this
splits the code generator in two functions and use information set by
the analyzer to tell which function to use, without a need to re-check.
This changes the error message to be more clear on the output files and
also fixes an issue with the relative path of the offending file that
was not trimmed correctly.
This adds initialization to every typed temporary stack slot at the
beginning of the function call instead of emitting instructions, since
those might be in a conditional branch and not be called.
This changes the types of a big number of variables.
General rules:
- Using `uint64_t` in general. We also considered `int64_t` but eventually
settled on keeping it unsigned, which is also closer to what one would expect
with `size_t`/`off_t`.
- We only keep `int64_t` for `seek_end` (takes a negative offset from the end)
and for the `Variant` bindings, since `Variant::INT` is `int64_t`. This means
we only need to guard against passing negative values in `core_bind.cpp`.
- Using `uint32_t` integers for concepts not needing such a huge range, like
pages, blocks, etc.
In addition:
- Improve usage of integer types in some related places; namely, `DirAccess`,
core binds.
Note:
- On Windows, `_ftelli64` reports invalid values when using 32-bit MinGW with
version < 8.0. This was an upstream bug fixed in 8.0. It breaks support for
big files on 32-bit Windows builds made with that toolchain. We might add a
workaround.
Fixes#44363.
Fixesgodotengine/godot-proposals#400.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
In attribute expressions (`a.b`) it's possible that the base has an
incorrect syntax and thus become a nullptr expression in the tree. This
commit add the check for this case to fail gracefully instead of
crashing.
Lambda syntax is the same as a the function syntax (using the same
`func` keyword) except that the name is optional and it can be embedded
anywhere an expression is expected. E.g.:
func _ready():
var my_lambda = func(x):
print(x)
my_lambda.call("hello")
We've been using standard C library functions `memcpy`/`memset` for these since
2016 with 67f65f6639.
There was still the possibility for third-party platform ports to override the
definitions with a custom header, but this doesn't seem useful anymore.
The current code style guidelines forbid the use of `auto`.
Some uses of `auto` are still present, such as in UWP code (which
can't be currently tested) and macros (where removing `auto` isn't
easy).
There was a mixup between String and StringName keys. Now they're
clearly separated. This also means you have to consider which type
you're using for the dictionary keys and how you are accessing them.
There's now only 3 addressing modes: stack, constant, and member.
Self, class, and nil are now present respectively in the first 3 stack
slots. Global and class constants are moved to local constants when
compiling. Named globals is only present on editor to use on tool
singletons, so its use now emits a new instruction to copy the global to
the stack.
This allow us to further optimize the VM later by embedding the
addressing modes in the instructions themselves, which is better done
with less permutations.
This is meant for testing the GDScript implementation, not for testing
user scripts nor testing the engine using scripts.
Tests consists in a GDScript file and a .out file with the expected
output. The .out file format is: expected status (based on the enum
GDScriptTest::TestStatus) on the first line, followed by either an error
message or the resulting output. Warnings are added after the first
line, before the output (or compiler errors) if the parser pass without
any error.
The test script must have a function called `test()` which takes no
argument. Such function will be called by the test runner. The test
should not have any dependency unless it's part of the test too. Global
classes (using `class_name`) are registered before the runner starts, so
those should work if needed.
Use the command `godot --gdscript-generate-tests
godot-source/modules/gdscript/tests/scripts` to update the .out files
with the current output (make sure the output are the expected values
before committing).
The tests themselves are part of the doctest suite so those can be
executed with `godot --test`.
Co-authored-by: Andrii Doroshenko (Xrayez) <xrayez@gmail.com>
When the type cannot be validated at compile time, the runtime must do a
check to ensure type safety is kept, as the code might be assuming the
return type is correct in another place, leading to crashes if the
contract is broken.
This ensures that annotations that rely on the datatype (such as
@export) can validated it timely, allowing compound expressions instead
of only literal values.
- Use `Array[type]` for type-hints. e.g.:
`var array: Array[int] = [1, 2, 3]`
- Array literals are typed if their storage is typed (variable
asssignment of as argument in function all). Otherwise they are
untyped.
When this code was changed for 4.0, a "break" statement inside a for loop in 3.x was changed to "return".
This means that the two special cases (autoloads and input actions) are never checked.
Removing the return lets these work properly in the editor.
(Also reorder conditionals to short-circuit and avoid expensive methods.)
-Added a new method in Resource: reset_state , used for reloading the same resource from disk
-Added a new cache mode "replace" in ResourceLoader, which reuses existing loaded sub-resources but resets their data from disk (or replaces them if they chaged type)
-Because the correct sub-resource paths are always loaded now, this fixes bugs with subresource folding or subresource ordering when saving.
- Based on C++11's `thread` and `thread_local`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed (except for the few cases of non-portable functions)
- Simpler for `NO_THREADS`
- Thread ids are now the same across platforms (main is 1; others follow)
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
Instead of references. This is needed because those function pointers
are used in GDNative which needs to work with plain C, which doesn't
support passing parameters by reference.
Storing script references to pointer only in result.script_type could
lead to losing the last reference, causing further conversions from
Script* to Ref<Script> to fail.
Now result.script_type_ref is always set first, and then cleared in the
specific case of the script being the owner, to avoid cyclic reference
issues.
The removed check was adding a protection for the case where a `Reference` has not yet got its reference count initialized and a script is called on it. That would cause the object to be released after the call. The removed code was constructing the `Variant` via the `Object` constructor so it didn't deal with the reference count and so the release was prevented.
However, `Variant` no longer works that way so that check was useless. Now it's just illegal to run GDScript on a Reference whose reference count has not been initialized.
- Initialize Object pointer to nullptr so it's not used by mistake.
- When setting an Object check if it's a reference so refcounting works
as intended.
Values that are passed by reference are not suited for being constructed
at compile time because in this case they would be shared across all the
construction statements.
- ClassDoc added to GDScript and property reflection data were extracted
from parse tree
- GDScript comments are collected from tokenizer for documentation and
applied to the ClassDoc by the GDScript compiler
- private docs were excluded (name with underscore prefix and doesn't
have any doc comments)
- default values (of non exported vars), arguments are extraced from the
parser
- Integrated with GDScript 2.0 and new enums were added.
- merge conflicts fixed
- Use the new functions in Variant to determine the validity and resulting
type of operators.
- Split the operator function in codegen between binary and unary, since
the unary ones have now a special requirement of having the second
argument to be the NIL type when requesting info.
They are now called "utility functions" to avoid confusion with methods
of builtin types, and be consistent with the naming in Variant.
Core utility functions are now available in GDScript. The ones missing
in core are added specifically to GDScript as helpers for convenience.
Some functions were remove when there are better ways to do, reducing
redundancy and cleaning up the global scope.
The call of range() in a for loop is optimized to use int or vectors, to
avoid allocating an array, however the type was set as array still. With
the new typed VM this is an issue as the type mismatch the actual value,
resulting in wrong instructions to be selected.
- Replace the for loop temporaries by locals. They cause conflicts with
the stack when being popped, while locals are properly handled in the
scope.
- Change the interface for the codegen so the for loop list doesn't live
through the whole block if it's a temporary.
- Keep track of the actual amount of local variables in the stack. Using
the size of the map is misleading in cases where multiple locals have
the same name (which is allowed when there's no shadowing).
- Added a few debug checks for temporaries, to avoid them being wrongly
manipulated in the future. They should not live more than a line of
code.
- Rearrange some of compiler code to make sure the temporaries don't
live across blocks.
Almost all instructions need variant arguments. With this change they
are loaded in an array before each instruction call. This makes the
addressing code be localized to less places, improving compilation
overhead and binary size by a small margin.
This should not affect performance.
* Using C-style function pointers now, InternalMethod is gone.
* This ensures much better performance in typed code.
* Renamed builtin_funcs to utility_funcs, to avoid naming confusion
The underscore prefix was used to avoid the conflict between the `RID` class
name and the matching enum value in `Variant::Type`.
This can be fixed differently by prefixing uses of the `RID` class in `Variant`
with the scope resolution operator, as done already for `AABB`.
-Discern between named, indexed and keyed
-Get direct access to functions for typed GDScript and GDNative bindings
-Small changes to some classes in order to work with the new setget binder
The GDScript `load` mention is moved from the class `ResourceLoader`
description to the `ResourceLoader.load` method description instead,
where it is more likely to be found.
