* Works from RenderinServer
* Accurately tells when on or off-scren, its no longer approximate.
* VisibilityEnabler also simplified to use the process mode instead.
The subindex within Resource wasn't synchronized with the path stored
in cache when saving a packed scene. It could cause sub-resources to be
swapped when loading the same packed scene in the same session.
Now the subindex in Resource reflects the sub-resource path in cache,
making saving and loading sub-resources consistent.
Co-authored-by: latorril <latorril@gmail.com>
Renames get_parent_spatial() to get_parent_node3d() and changes its
implementation. Before it was not returning a correct pointer if the
node wasn't added to a SceneTree. Now it uses the same implementation as
CanvasItem, which will be correct even for nodes outside a SceneTree.
This commit adds the following properties to GeometryInstance3D: `visibility_range_begin`,
`visibility_range_begin_margin`, `visibility_range_end`, `visibility_range_end_margin`.
Together they define a range in which the GeometryInstance3D will be visible from the camera,
taking hysteresis into account for state changes. A begin or end value of 0 will be ignored,
so the visibility range can be open-ended in both directions.
This commit also adds the `visibility_parent` property to 'Node3D'.
Which defines the visibility parents of the node and its subtree (until
another parent is defined).
Visual instances with a visibility parent will only be visible when the parent, and all of its
ancestors recursively, are hidden because they are closer to the camera than their respective
`visibility_range_begin` thresholds.
Combining visibility ranges and visibility parents users can set-up a quick HLOD system
that shows high detail meshes when close (i.e buildings, trees) and merged low detail meshes
for far away groups (i.e. cities, woods).
Low zoom values result in unreadable text, but it can still be
useful for previewing purposes.
Eventually, characters could be replaced by rectangles at very low
zoom levels to improve the visual appearance.
This PR and commit adds a new IK system for 2D with the Skeleton2D node
that adds several new IK solvers, a way to control bones in a Skeleton2D
node similar to that in Skeleton3D. It also adds additional changes
and functionality.
This work was sponsored by GSoC 2020 and TwistedTwigleg.
Full list of changes:
* Adds a SkeletonModifier2D resource
* This resource is the base where all IK code is written and executed
* Has a function for clamping angles, since it is so commonly used
* Modifiers are unique when duplicated so it works with instancing
* Adds a SkeletonModifierStack2D resource
* This resource manages a series of SkeletonModification2Ds
* This is what the Skeleton2D directly interfaces with to make IK possible
* Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK
* Each modification is in its own file
* There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together
* Adds a PhysicalBone2D node
* Works similar to the PhysicalBone3D node, but uses a RigidBody2D node
* Changes to Skeleton2D listed below:
* Skeleton2D now holds a single SkeletonModificationStack2D for IK
* Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D
* Changes to Bone2D listed below:
* The default_length property has been changed to length. Length is the length of the bone to its child bone node
* New bone_angle property, which is the angle the bone has to its first child bone node
* Bone2D caches its transform when not modified by IK for IK interpolation purposes
* Bone2D draws its own editor gizmo, though this is stated to change in the future
* Changes to CanvasItemEditor listed below:
* Bone2D gizmo drawing code removed
* The 2D IK code is removed. Now Bone2D is the only bone system for 2D
* Transform2D now has a looking_at function for rotating to face a position
* Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE
* These notifications only are called in the editor right before and after saving a scene
* Needed for not saving the IK position when executing IK in the editor
* Documentation for all the changes listed above.
* GIProbe is now VoxelGI
* BakedLightmap is now LightmapGI
As godot adds more ways to provide GI (as an example, SDFGI in 4.0), the different techniques (which have different pros/cons) need to be properly named to avoid confusion.
YSort now has a compatibility alias to Node2D.
Updated TileMap to use the existing Node2D y_sort_enabled property instead
of its own property.
Updated Node2D doc to include the new y_sort_enabled member.
Updated TileMap doc to remove its mention of cell_y_sort.
Deleted YSort doc.
CharacterBody has a linear_velocity property to replace the argument in
move_and_slide.
StaticBody handles reporting linear/angular velocity correctly when
kinematic motion is used (in 3D, used in vehicle and navigation).
Safe margin property on CharacterBody only, used as argument in
move_and_collide.
Removed kinematic_safe_margin in 3D physics server, not really useful
and now harmonized with 2D.
Does the same thing as simulate motion from RigidBody in Kinematic mode,
and CharacterBody (previously KinematicBody).
Added support for constant linear/angular velocity with kinematic_motion
in StaticBody, which moves the body in physics.
Updated documentation for StaticBody and CharacterBody to describe their
functionalities more accurately.
MODE_DYNAMIC instead of MODE_RIGID
MODE_DYNAMIC_LOCKED instead of MODE_CHARACTER
No more special case for sleeping behavior for MODE_DYNAMIC_LOCKED
(MODE_CHARACTER was forcing the body not to sleep, which is redundant
with can_sleep and wasn't done in Bullet).
- snap property to replace move_and_slide_with_snap()
- floor_max_angle, stop_on_slope, infinite_inertia, max_slides,
up_direction properties to replace arguments from move_and_slide()
- up direction now defaults to Vector3.UP and Vector2.UP
PhysicsBody now has methods move_and_collide/test_move and needed
properties for these methods: safe margin, locked axes (3D only).
Moved collision_exceptions from StaticBody to PhysicsBody for 3D
(same as 2D, and conforms to documentation).
RigidBody doesn't have test_motion method anymore, it's now redundant
with PhysicsBody.test_move.
In this PR:
- Removed rset
- rpc_config can now optionally configure transfer mode
(reliable/unreliable/ordered) and channel (channels are not actually
implemented yet.)
- Refactor how the RPC id is computed to minimize the logic in Node and
scripts that now only needs a single `get_rpc_methods` function.
The new color for screen drawing was chosen to be easier to distinguish
from the 2D viewport limits.
This also makes lines less opaque when the Camera2D has the Current
property enabled. The increased line width is enough to spot the
camera easily, and the increased opacity on top of that felt obnoxious.
There were some issues in RichTextLabel `remove_line()` method, where items were not correctly removed, and line decremending for items in later lines was not correctly done.
This also fixed several headaches with EditorLog, which relied on the `remove_line()` method for collapsing of duplicate messages. The fix to RTL also fixed the issues with EditorLog.
Fixes#49030
This also acts as a general-purpose "deselect" shortcut since pressing
it a second time will deselect text.
This is available both in the script editor and in TextEdit fields
in use, both in the editor and projects.
The Duplicate Line script editor shortcut was moved to Ctrl + Shift + D
since it conflicts with the new shortcut (Ctrl + D). The rationale for
doing so is that Duplicate Line is a less commonly used action, and
its behavior can be replicated by copying and pasting the current line
anyway. (With no selection active, the whole line will be copied.)
The code is based on the current version of thirdparty/vhacd and modified to use Godot's types and code style.
Additional changes:
- extended PagedAllocator to allow leaked objects
- applied patch from https://github.com/bulletphysics/bullet3/pull/3037
This makes font oversampling work out of the box, while also increasing
the supported character set's size. The default font is now larger
as well to better fit today's screen resolutions.
The OpenSans SemiBold font was chosen for two reasons:
- Small file size, yet its character set supports Latin-1 and Cyrillic
text.
- A heavier font weight looks better in most "game" scenarios and is
more readable against mixed-color backgrounds.
This is considered a breaking change as it changes the default font's
metrics, which will likely affect how Control nodes are laid out in
scenes (unless a custom font is in use).
This changes the types of a big number of variables.
General rules:
- Using `uint64_t` in general. We also considered `int64_t` but eventually
settled on keeping it unsigned, which is also closer to what one would expect
with `size_t`/`off_t`.
- We only keep `int64_t` for `seek_end` (takes a negative offset from the end)
and for the `Variant` bindings, since `Variant::INT` is `int64_t`. This means
we only need to guard against passing negative values in `core_bind.cpp`.
- Using `uint32_t` integers for concepts not needing such a huge range, like
pages, blocks, etc.
In addition:
- Improve usage of integer types in some related places; namely, `DirAccess`,
core binds.
Note:
- On Windows, `_ftelli64` reports invalid values when using 32-bit MinGW with
version < 8.0. This was an upstream bug fixed in 8.0. It breaks support for
big files on 32-bit Windows builds made with that toolchain. We might add a
workaround.
Fixes#44363.
Fixesgodotengine/godot-proposals#400.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
Renamed incorrect "hint" variable names to "usage" in
`_get_property_list()`, as "hint" implies one of the PROPERTY_HINT_*
values, which is not the case here.
-Mesh2D now works
-MultiMesh2D now works
-Polygon2D now works
-Added hooks for processing 2D particles
-Skeleton2D now works
2D particles still not working, but stuff needed for it is now implemented.
- Move most properties from TileMap to TileSet,
- Make TileSet more flexible, supporting more feature (several
collision layers, etc...),
- Fusion both the TileMap and TileSet editor,
- Implement TileSetSources, and thus a new way to index tiles in the TileSet,
- Rework the TileSet and TileMap editors completely,
- Implement an editor zoom widget (and use it in several places)
The "Anisotropic" term is abbreviated as spelling it out would cause
the PopupMenu to overflow the editor window when using the default
inspector width.
This makes it easier to hear sound while setting up the node.
Since this changes the default value, this may break existing projects
slightly.
This also tweaks the Unit Size editor property hint for better usability.
See discussion in #25468.
Added method to create a new line in RichTextLabel without adding an ItemNewline to the previous line. Previously, removing a line then adding a newline was adding unnecessary ItemNewline instances to the previous line, significantly the remove_line method.
Various fixes to UV2 unwrapping and the GPU lightmapper. Listed here for
context in case of git blame/bisect:
* Fix UV2 unwrapping on import, also cleaned up the unwrap cache code.
* Fix saving of RGBA images in EXR format.
* Fixes to the GPU lightmapper:
- Added padding between atlas elements, avoids bleeding.
- Remove old SDF generation code.
- Fix baked attenuation for Omni/Spot lights.
- Fix baking of material properties onto UV2 (wireframe was
wrongly used before).
- Disable statically baked lights for objects that have a
lightmap texture to avoid applying the same light twice.
- Fix lightmap pairing in RendererSceneCull.
- Fix UV2 array generated from `RenderingServer::mesh_surface_get_arrays()`.
- Port autoexposure fix for OIDN from 3.x.
- Save debug textures as EXR when using floating point format.
