It seems to stay compatible with formatting done by clang-format 6.0 and 7.0,
so contributors can keep using those versions for now (they will not undo those
changes).
With this change finally one can use compound collisions (like those created
by Gridmaps) without serious performance issues. The previous KinematicBody
code for Bullet was practically doing a whole bunch of unnecessary
calculations. Gridmaps with fairly large octant sizes (in my case 32) can get
up to 10000x speedup with this change (literally!). I expect the FPS demo to
get a fair speedup as well.
List of fixes and improvements:
- Fixed a general bug in move_and_slide that affects both GodotPhysics and
Bullet, where ray shapes would be ignored unless the stop_on_slope parameter
is disabled. Not sure where that came from, but looking at the 2D physics
code it was obvious there's a difference.
- Enabled the dynamic AABB tree that Bullet uses to allow broadphase collision
tests against individual shapes of compound shapes. This is crucial to get
good performance with Gridmaps and in general improves the performance
whenever a KinematicBody collides with compound collision shapes.
- Added code to the broadphase collision detection code used by the Bullet
module for KinematicBodies to also do broadphase on the sub-shapes of
compound collision shapes. This is possible thanks to the dynamic AABB
tree that was previously disabled and it's the change that provides the
biggest performance boost.
- Now broadphase test is only done once per KinematicBody in Bullet instead of
once per each of its shapes which was completely unnecessary.
- Fixed the way how the ray separation results are populated in Bullet which
was completely broken previously, overwriting previous results and similar
non-sense.
- Fixed ray shapes for good now. Previously the margin set in the editor was
not respected at all, and the KinematicBody code for ray separation was
complete bogus, thus all previous attempts to fix it were mislead.
- Fixed an obvious bug also in GodotPhysics where an out-of-bounds index was
used in the ray result array.
There are a whole set of other problems with the KinematicBody code of Bullet
which cost performance and may cause unexpected behavior, but those are not
addressed in this change (need to keep it "simple").
Not sure whether this fixes any outstanding Github issues but I wouldn't be
surprised.
There was a bug that could result in most bone aabb boxes ending up with
tiny size upon import and mess up with culling of skeletal meshes. This
fixes it.
- Texture arrays and 3D textures weren't working previously due to an
incorrect number of calls to glTexImage3D with incorrect level parameters.
This change fixes that.
- Fixed the incorrect calculation of the byte size of layered textures.
- Added the layer count to the debugger info when viewing video memory usage.
CLAMP limits the value between the two bounds, so for unsigned ints
it should be replaced by MIN(val, max), not MAX.
The issue in voxel_light_baker.cpp was fixed in 4f697f7.
Fixes#26170.
This allows most demos to run without any ubsan or asan errors. There
are still some things in thirdpart/ and some things in AudioServer that
needs a look but this fixes a lot of issues. This should help debug less
obvious issues, hopefully.
This fixes#25217 and fixes#25218
This reverts commit 5de5a4140b.
@reduz still intends to rework it in the future, and it's convenient to
test if issues are specific to Bullet or not, so we keep it around for
the time being.
Remove animation loop from ParticlesMaterial and move it to
SpatialMaterial for 3D particles and Particles2D for the 2D case.
Added animation to CPUParticles2D as well as the "Convert to
CPUParticles2D" to the PAarticles2D menu.
Initialise keep_original_textures and use_fast_texture_filter in storage
config. Removed any other variables from storage config that were both unused
and uninitialised to avoid future confusion (if they're needed it's
easier to spot an uninitialised variable problem in a PR that adds the
variable again rather than just uses it).
Copied storage Texture struct constructor from GLES3 implementation
(except where variables were already initialised with different values).
Gives us sensible tested defaults for previously uninitialised vars.
Added assignments for state.current_main_tex based on same in GLES3.
Non-monitorable areas are never removed from the monitor query of other areas. This makes areas that turn not
monitorable while overlapping with other areas get stuck in the other areas' monitor query and trigger false
overlaps.
This is a fix for issue #9148.
Fixes the following GCC 7 warnings:
```
core/cowdata.h:269:47: warning: 'alloc_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/error_macros.h:163:26: warning: 'nearest_point' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/image.cpp:1579:5: warning: 'colormap_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/image.cpp:1582:12: warning: 'size_height' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/image.cpp:1590:23: warning: 'size_width' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/image.cpp:1599:29: warning: 'pixel_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/math/face3.cpp:207:15: warning: 'tri_max' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/math/face3.cpp:209:15: warning: 'tri_min' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gles3/rasterizer_scene_gles3.cpp:665:22: warning: 'best_used_frame' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gles3/rasterizer_storage_gles3.cpp:865:27: warning: 'blit_target' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gles3/rasterizer_storage_gles3.cpp:980:29: warning: 'blit_target' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gles3/shader_gles3.h:122:9: warning: '<anonymous>.ShaderGLES3::Version::frag_id' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gles3/shader_gles3.h:122:9: warning: '<anonymous>.ShaderGLES3::Version::id' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gles3/shader_gles3.h:122:9: warning: '<anonymous>.ShaderGLES3::Version::vert_id' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/plugins/script_editor_plugin.cpp:1980:31: warning: 'se' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/scene_tree_dock.cpp:840:30: warning: 'new_node' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4259:9: warning: 'a1' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4259:9: warning: 'lll' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4259:9: warning: 'lul' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4260:9: warning: 'a2' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4261:9: warning: 'a3' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4265:3: warning: 'enable_lin' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4294:3: warning: 'enable_ang' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4311:34: warning: 'll' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4311:34: warning: 'ul' may be used uninitialized in this function [-Wmaybe-uninitialized]
scene/3d/voxel_light_baker.cpp:1655:47: warning: 'cone_dirs' may be used uninitialized in this function [-Wmaybe-uninitialized]
scene/3d/voxel_light_baker.cpp:1656:73: warning: 'cone_weights' may be used uninitialized in this function [-Wmaybe-uninitialized]
scene/gui/texture_progress.cpp:181:6: warning: 'cp' may be used uninitialized in this function [-Wmaybe-uninitialized]
scene/gui/texture_progress.cpp:181:6: warning: 'cq' may be used uninitialized in this function [-Wmaybe-uninitialized]
servers/physics/shape_sw.cpp:1056:19: warning: 'support_max' may be used uninitialized in this function [-Wmaybe-uninitialized]
```
Fixes the following Clang 7 warnings:
```
editor/editor_help.h:123:7: warning: 'EditorHelpIndex::popup' hides overloaded virtual function [-Woverloaded-virtual]
editor/editor_help.h:95:7: warning: 'EditorHelpSearch::popup' hides overloaded virtual function [-Woverloaded-virtual]
editor/editor_help.h:96:7: warning: 'EditorHelpSearch::popup' hides overloaded virtual function [-Woverloaded-virtual]
editor/plugins/curve_editor_plugin.h:141:15: warning: 'CurvePreviewGenerator::generate' hides overloaded virtual function [-Woverloaded-virtual]
editor/plugins/script_editor_plugin.h:70:7: warning: 'ScriptEditorQuickOpen::popup' hides overloaded virtual function [-Woverloaded-virtual]
editor/quick_open.h:69:7: warning: 'EditorQuickOpen::popup' hides overloaded virtual function [-Woverloaded-virtual]
main/tests/test_io.cpp:53:15: warning: 'TestIO::TestMainLoop::input_event' hides overloaded virtual function [-Woverloaded-virtual]
servers/audio/effects/audio_effect_record.h:69:15: warning: 'AudioEffectRecordInstance::process_silence' hides overloaded virtual function [-Woverloaded-virtual]
core/os/memory.h:119:2: warning: destructor called on non-final 'ContextGL_X11' that has virtual functions but non-virtual destructor [-Wdelete-non-virtual-dtor]
core/os/memory.h:119:2: warning: destructor called on non-final 'EditorScriptCodeCompletionCache' that has virtual functions but non-virtual destructor [-Wdelete-non-virtual-dtor]
core/os/memory.h:119:2: warning: destructor called on non-final 'Engine' that has virtual functions but non-virtual destructor [-Wdelete-non-virtual-dtor]
core/os/memory.h:119:2: warning: destructor called on non-final 'PhysicalBone::JointData' that has virtual functions but non-virtual destructor [-Wdelete-non-virtual-dtor]
core/os/memory.h:119:2: warning: destructor called on non-final 'VisualServerScene' that has virtual functions but non-virtual destructor [-Wdelete-non-virtual-dtor]
core/os/memory.h:119:2: warning: destructor called on non-final 'VisualServerViewport' that has virtual functions but non-virtual destructor [-Wdelete-non-virtual-dtor]
```
Namely:
[-Wunneeded-internal-declaration]
[-Wunused-comparison]
[-Wunused-const-variable]
[-Wunused-function]
[-Wunused-private-fields]
Fixes the following Clang 7 warnings:
```
editor/plugins/script_editor_plugin.cpp:1417:20: warning: function '_find_node_with_script' is not needed and will not be emitted [-Wunneeded-internal-declaration]
editor/scene_tree_dock.cpp:1859:14: warning: function '_find_last_visible' is not needed and will not be emitted [-Wunneeded-internal-declaration]
modules/gdscript/gdscript_parser.cpp:7838:19: warning: equality comparison result unused [-Wunused-comparison]
scene/resources/mesh.cpp:549:35: warning: unused variable '_array_types' [-Wunused-const-variable]
scene/resources/mesh.cpp:563:18: warning: unused variable '_format_translate' [-Wunused-const-variable]
drivers/gles3/rasterizer_scene_gles3.cpp:54:28: warning: unused function 'store_transform2d' [-Wunused-function]
core/io/file_access_network.h:50:6: warning: private field 'ml' is not used [-Wunused-private-field]
core/io/file_access_zip.h:93:14: warning: private field 'archive' is not used [-Wunused-private-field]
core/io/resource_format_binary.h:122:6: warning: private field 'bin_meta_idx' is not used [-Wunused-private-field]
core/message_queue.h:47:9: warning: private field 'mutex' is not used [-Wunused-private-field]
main/tests/test_gui.cpp:63:11: warning: private field 'control' is not used [-Wunused-private-field]
modules/gdscript/gdscript_parser.h:558:7: warning: private field 'completion_static' is not used [-Wunused-private-field]
platform/x11/os_x11.h:148:11: warning: private field 'ip_unix' is not used [-Wunused-private-field]
platform/x11/os_x11.h:180:7: warning: private field 'net_wm_icon' is not used [-Wunused-private-field]
platform/x11/os_x11.h:189:6: warning: private field 'audio_driver_index' is not used [-Wunused-private-field]
platform/x11/os_x11.h:190:15: warning: private field 'capture_idle' is not used [-Wunused-private-field]
servers/physics/body_pair_sw.h:79:6: warning: private field 'cc' is not used [-Wunused-private-field]
servers/visual/visual_server_raster.h:62:7: warning: private field 'draw_extra_frame' is not used [-Wunused-private-field]
```
Fixes the following Clang 7 warnings:
```
core/object.cpp:44:1: warning: '_ObjectDebugLock' defined as a struct here but previously declared as a class [-Wmismatched-tags]
core/variant_call.cpp:43:1: warning: '_VariantCall' defined as a struct here but previously declared as a class [-Wmismatched-tags]
drivers/gles3/rasterizer_storage_gles3.h:765:2: warning: 'MultiMesh' defined as a struct here but previously declared as a class [-Wmismatched-tags]
editor/editor_node.h:794:1: warning: 'EditorProgress' defined as a struct here but previously declared as a class [-Wmismatched-tags]
modules/bullet/rigid_body_bullet.h:230:17: warning: class 'KinematicUtilities' was previously declared as a struct [-Wmismatched-tags]
modules/bullet/space_bullet.h:60:1: warning: class 'btSoftBodyWorldInfo' was previously declared as a struct [-Wmismatched-tags]
scene/resources/world_2d.cpp:40:1: warning: 'SpatialIndexer2D' defined as a struct here but previously declared as a class [-Wmismatched-tags]
scene/resources/world.cpp:39:1: warning: 'SpatialIndexer' defined as a struct here but previously declared as a class [-Wmismatched-tags]
servers/audio/reverb_sw.cpp:60:1: warning: 'ReverbParamsSW' defined as a struct here but previously declared as a class [-Wmismatched-tags]
thirdparty/bullet/BulletSoftBody/btSoftBody.h:43:1: warning: 'btSoftBodyWorldInfo' defined as a struct here but previously declared as a class [-Wmismatched-tags]
```
Fixes the following GCC 5 warnings:
```
core/object.h:193:11: warning: 'MethodInfo::flags' will be initialized after [-Wreorder]
core/object.h:192:15: warning: 'PropertyInfo MethodInfo::return_val' [-Wreorder]
core/object.cpp:278:1: warning: when initialized here [-Wreorder]
core/script_debugger_remote.h:97:6: warning: 'ScriptDebuggerRemote::max_cps' will be initialized after [-Wreorder]
core/script_debugger_remote.h:91:6: warning: 'int ScriptDebuggerRemote::max_messages_per_frame' [-Wreorder]
core/script_debugger_remote.cpp:1086:1: warning: when initialized here [-Wreorder]
core/script_debugger_remote.h:98:6: warning: 'ScriptDebuggerRemote::char_count' will be initialized after [-Wreorder]
core/script_debugger_remote.h:92:6: warning: 'int ScriptDebuggerRemote::n_messages_dropped' [-Wreorder]
core/script_debugger_remote.cpp:1086:1: warning: when initialized here [-Wreorder]
modules/bullet/area_bullet.h:102:7: warning: 'AreaBullet::isScratched' will be initialized after [-Wreorder]
modules/bullet/area_bullet.h:92:39: warning: 'PhysicsServer::AreaSpaceOverrideMode AreaBullet::spOv_mode' [-Wreorder]
modules/bullet/area_bullet.cpp:46:1: warning: when initialized here [-Wreorder]
modules/bullet/collision_object_bullet.h:127:15: warning: 'CollisionObjectBullet::space' will be initialized after [-Wreorder]
modules/bullet/collision_object_bullet.h:117:7: warning: 'CollisionObjectBullet::Type CollisionObjectBullet::type' [-Wreorder]
modules/bullet/collision_object_bullet.cpp:67:1: warning: when initialized here [-Wreorder]
modules/bullet/godot_ray_world_algorithm.h:48:7: warning: 'GodotRayWorldAlgorithm::m_ownManifol1d' will be initialized after [-Wreorder]
modules/bullet/godot_ray_world_algorithm.h:46:33: warning: 'const btDiscreteDynamicsWorld* GodotRayWorldAlgorithm::m_world' [-Wreorder]
modules/bullet/godot_ray_world_algorithm.cpp:50:1: warning: when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:91:18: warning: 'GodotAllConvexResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:89:6: warning: 'int GodotAllConvexResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:93:2: warning: when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:142:18: warning: 'GodotAllContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:140:6: warning: 'int GodotAllContactResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:147:2: warning: when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:168:18: warning: 'GodotContactPairContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:166:6: warning: 'int GodotContactPairContactResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:173:2: warning: when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:195:18: warning: 'GodotRestInfoContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:191:7: warning: 'bool GodotRestInfoContactResultCallback::m_collided' [-Wreorder]
modules/bullet/godot_result_callbacks.h:199:2: warning: when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:200:9: warning: 'RigidBodyBullet::gravity_scale' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:199:9: warning: 'real_t RigidBodyBullet::mass' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning: when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:222:28: warning: 'RigidBodyBullet::force_integration_callback' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:219:7: warning: 'bool RigidBodyBullet::isTransformChanged' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning: when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:220:7: warning: 'RigidBodyBullet::previousActiveState' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:208:6: warning: 'int RigidBodyBullet::maxCollisionsDetection' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning: when initialized here [-Wreorder]
modules/bullet/soft_body_bullet.h:69:9: warning: 'SoftBodyBullet::total_mass' will be initialized after [-Wreorder]
modules/bullet/soft_body_bullet.h:68:6: warning: 'int SoftBodyBullet::simulation_precision' [-Wreorder]
modules/bullet/soft_body_bullet.cpp:38:1: warning: when initialized here [-Wreorder]
modules/bullet/soft_body_bullet.h:76:9: warning: 'SoftBodyBullet::drag_coefficient' will be initialized after [-Wreorder]
modules/bullet/soft_body_bullet.h:61:14: warning: 'btSoftBody* SoftBodyBullet::bt_soft_body' [-Wreorder]
modules/bullet/soft_body_bullet.cpp:38:1: warning: when initialized here [-Wreorder]
modules/bullet/space_bullet.h:97:22: warning: 'SpaceBullet::solver' will be initialized after [-Wreorder]
modules/bullet/space_bullet.h:95:35: warning: 'btDefaultCollisionConfiguration* SpaceBullet::collisionConfiguration' [-Wreorder]
modules/bullet/space_bullet.cpp:333:1: warning: when initialized here [-Wreorder]
modules/bullet/space_bullet.h:101:23: warning: 'SpaceBullet::soft_body_world_info' will be initialized after [-Wreorder]
modules/bullet/space_bullet.h:99:23: warning: 'btGhostPairCallback* SpaceBullet::ghostPairCallback' [-Wreorder]
modules/bullet/space_bullet.cpp:333:1: warning: when initialized here [-Wreorder]
modules/gdnative/nativescript/nativescript.h:79:13: warning: 'NativeScriptDesc::base_native_type' will be initialized after [-Wreorder]
modules/gdnative/nativescript/nativescript.h:73:9: warning: 'String NativeScriptDesc::documentation' [-Wreorder]
modules/gdnative/nativescript/nativescript.h:88:9: warning: when initialized here [-Wreorder]
modules/gdscript/gdscript.h:296:6: warning: 'GDScriptWarning::line' will be initialized after [-Wreorder]
modules/gdscript/gdscript.h:294:4: warning: 'GDScriptWarning::Code GDScriptWarning::code' [-Wreorder]
modules/gdscript/gdscript.h:303:2: warning: when initialized here [-Wreorder]
scene/3d/physics_body.h:544:7: warning: 'PhysicalBone::simulate_physics' will be initialized after [-Wreorder]
scene/3d/physics_body.h:543:7: warning: 'bool PhysicalBone::_internal_static_body' [-Wreorder]
scene/3d/physics_body.cpp:2502:1: warning: when initialized here [-Wreorder]
scene/3d/physics_body.h:546:6: warning: 'PhysicalBone::bone_id' will be initialized after [-Wreorder]
scene/3d/physics_body.h:539:12: warning: 'Skeleton* PhysicalBone::parent_skeleton' [-Wreorder]
scene/3d/physics_body.cpp:2502:1: warning: when initialized here [-Wreorder]
scene/3d/spring_arm.h:44:11: warning: 'SpringArm::mask' will be initialized after [-Wreorder]
scene/3d/spring_arm.h:43:8: warning: 'float SpringArm::current_spring_length' [-Wreorder]
scene/3d/spring_arm.cpp:37:1: warning: when initialized here [-Wreorder]
scene/animation/skeleton_ik.h:159:11: warning: 'SkeletonIK::target_node_override' will be initialized after [-Wreorder]
scene/animation/skeleton_ik.h:152:7: warning: 'bool SkeletonIK::use_magnet' [-Wreorder]
scene/animation/skeleton_ik.cpp:418:1: warning: when initialized here [-Wreorder]
scene/resources/tile_set.h:84:9: warning: 'TileSet::AutotileData::size' will be initialized after [-Wreorder]
scene/resources/tile_set.h:83:7: warning: 'int TileSet::AutotileData::spacing' [-Wreorder]
scene/resources/tile_set.h:92:12: warning: when initialized here [-Wreorder]
scene/resources/tile_set.h:115:12: warning: 'TileSet::TileData::tile_mode' will be initialized after [-Wreorder]
scene/resources/tile_set.h:114:9: warning: 'Color TileSet::TileData::modulate' [-Wreorder]
scene/resources/tile_set.h:120:12: warning: when initialized here [-Wreorder]
servers/physics/body_sw.h:84:19: warning: 'BodySW::direct_state_query_list' will be initialized after [-Wreorder]
servers/physics/body_sw.h:57:11: warning: 'uint16_t BodySW::locked_axis' [-Wreorder]
servers/physics/body_sw.cpp:756:1: warning: when initialized here [-Wreorder]
```
Nothing really relevant for us, but it's not a bad consistency
improvement anyway so worth taking.
Fixes GCC 5 warnings of the form:
core/io/http_client.cpp:288:9: warning: enumeration value 'STATUS_SSL_HANDSHAKE_ERROR' not handled in switch [-Wswitch]
core/io/marshalls.cpp:806:9: warning: enumeration value 'AABB' not handled in switch [-Wswitch]
Those can be trivial cases where adding a default fallback is the solution,
or more complex issues/hidden bugs where missed values are actually meant
to be handled.
Fixes the following GCC 5 warnings:
```
core/os/file_access.cpp:49:19: warning: the address of 'FileAccess::create_func' will always evaluate as 'true' [-Waddress]
servers/audio_server.cpp:192:70: warning: comparison with string literal results in unspecified behaviour [-Waddress]
drivers/gles2/rasterizer_storage_gles2.cpp:4095:90: warning: NULL used in arithmetic [-Wpointer-arith]
modules/gdnative/register_types.cpp:237:3: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
platform/android/export/export.cpp:207:1: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
modules/gdscript/gdscript.h:150:67: warning: returning reference to temporary [-Wreturn-local-addr]
servers/physics_2d/collision_object_2d_sw.h:119:56: warning: returning reference to temporary [-Wreturn-local-addr]
servers/physics_2d/collision_object_2d_sw.h:123:56: warning: returning reference to temporary [-Wreturn-local-addr]
servers/physics_2d/collision_object_2d_sw.h:127:50: warning: returning reference to temporary [-Wreturn-local-addr]
servers/physics_2d/collision_object_2d_sw.h:131:52: warning: returning reference to temporary [-Wreturn-local-addr]
editor/plugins/skeleton_editor_plugin.cpp:34:36: warning: extra tokens at end of #include directive
modules/bullet/bullet_types_converter.cpp:31:9: warning: #pragma once in main file
editor/import/editor_scene_importer_gltf.cpp:1996:51: warning: name lookup of 'i' changed
modules/visual_script/visual_script_property_selector.cpp:402:45: warning: name lookup of 'E' changed
scene/gui/tree.cpp:1268:25: warning: name lookup of 'i' changed
scene/resources/visual_shader.cpp:808:32: warning: name lookup of 'i' changed
```
Fixes the following GCC 5 warnings:
```
drivers/gles2/rasterizer_canvas_gles2.cpp:814:8: warning: variable 'rt_size' set but not used [-Wunused-but-set-variable]
drivers/gles2/rasterizer_scene_gles2.cpp:2270:11: warning: variable 'vp_height' set but not used [-Wunused-but-set-variable]
drivers/gles2/rasterizer_scene_gles2.cpp:2673:22: warning: variable 'e' set but not used [-Wunused-but-set-variable]
drivers/gles2/rasterizer_scene_gles2.cpp:715:7: warning: variable 'no_cull' set but not used [-Wunused-but-set-variable]
drivers/gles2/shader_gles2.cpp:693:14: warning: variable 'cc' set but not used [-Wunused-but-set-variable]
drivers/gles3/rasterizer_canvas_gles3.cpp:1226:8: warning: variable 'rt_size' set but not used [-Wunused-but-set-variable]
drivers/gles3/rasterizer_scene_gles3.cpp:3039:10: warning: variable 'contrib' set but not used [-Wunused-but-set-variable]
drivers/gles3/rasterizer_scene_gles3.cpp:4504:32: warning: variable 'vp_height' set but not used [-Wunused-but-set-variable]
editor/editor_inspector.cpp:272:9: warning: variable 'guide_color' set but not used [-Wunused-but-set-variable]
editor/editor_themes.cpp:1067:14: warning: variable 'alpha3' set but not used [-Wunused-but-set-variable]
editor/editor_themes.cpp:263:8: warning: variable 'script_bg_color' set but not used [-Wunused-but-set-variable]
editor/plugins/collision_shape_2d_editor_plugin.cpp:326:11: warning: variable 'cpoint' set but not used [-Wunused-but-set-variable]
editor/plugins/mesh_editor_plugin.cpp:72:9: warning: variable 'size' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:471:12: warning: variable 'mpos' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:89:8: warning: variable 'basetype_color' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:90:8: warning: variable 'type_color' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:92:8: warning: variable 'string_color' set but not used [-Wunused-but-set-variable]
modules/visual_script/visual_script_editor.cpp:2521:7: warning: variable 'seq_connect' set but not used [-Wunused-but-set-variable]
platform/android/export/export.cpp:580:12: warning: variable 'styles_count' set but not used [-Wunused-but-set-variable]
platform/android/export/export.cpp:584:12: warning: variable 'styles_offset' set but not used [-Wunused-but-set-variable]
platform/osx/export/export.cpp:464:9: warning: variable 'zerr' set but not used [-Wunused-but-set-variable]
scene/2d/tile_map.cpp:260:10: warning: variable 'tcenter' set but not used [-Wunused-but-set-variable]
scene/3d/light.cpp:166:7: warning: variable 'editor_ok' set but not used [-Wunused-but-set-variable]
scene/3d/navigation.cpp:566:11: warning: variable 'closest_navmesh' set but not used [-Wunused-but-set-variable]
scene/gui/rich_text_label.cpp:869:8: warning: variable 'size' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:705:14: warning: variable 'xform' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:706:8: warning: variable 'ss' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:726:14: warning: variable 'xform' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:727:8: warning: variable 'ss' set but not used [-Wunused-but-set-variable]
scene/resources/material.cpp:430:7: warning: variable 'using_world' set but not used [-Wunused-but-set-variable]
servers/visual/shader_language.cpp:2026:7: warning: variable 'all_const' set but not used [-Wunused-but-set-variable]
servers/visual/visual_server_scene.cpp:1383:28: warning: variable 'z_max_cam' set but not used [-Wunused-but-set-variable]
```
Also fixes two [-Wunused-value] warnings:
```
scene/gui/text_edit.cpp:4405:20: warning: statement has no effect [-Wunused-value]
servers/visual/visual_server_scene.cpp:905:48: warning: value computed is not used [-Wunused-value]
```
Some of those are bugs and need further work, they are identified with
`// FIXME` comments.
Also turn off -Wsign-compare warnings in the future, we do not consider them important.
Fixes the following GCC 5 warnings:
```
core/node_path.cpp:279:24: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
core/oa_hash_map.h:169:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
core/oa_hash_map.h:314:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/gles2/shader_gles2.cpp:985:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/gles3/rasterizer_storage_gles3.cpp:1075:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/pulseaudio/audio_driver_pulseaudio.cpp:343:34: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/editor_plugin.cpp:525:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/editor_properties_array_dict.cpp:747:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/plugins/spatial_editor_plugin.cpp:2078:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/plugins/spatial_editor_plugin.cpp:4096:27: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/plugins/sprite_editor_plugin.cpp💯20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/cvtt/image_compress_cvtt.cpp:122:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/cvtt/image_compress_cvtt.cpp:134:77: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/cvtt/image_compress_cvtt.cpp:339:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/etc/image_etc.cpp:222:34: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/gdnative/register_types.cpp:242:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/gdnative/register_types.cpp:258:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/opensimplex/simplex_noise.cpp:200:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/opensimplex/simplex_noise.cpp:222:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/opensimplex/simplex_noise.cpp:246:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/android/export/export.cpp:1085:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/android/export/export.cpp:1489:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/android/export/export.cpp:1623:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/iphone/export/export.cpp:206:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/iphone/export/export.cpp:356:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/iphone/export/export.cpp:406:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/iphone/export/export.cpp:493:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/audio_stream_player_3d.cpp:420:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/resources/audio_stream_sample.cpp:565:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/resources/audio_stream_sample.cpp:571:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio/audio_rb_resampler.cpp:156:36: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
```
The following warnings were not fixed, as they implied casting for no gain:
```
core/io/packet_peer.cpp:228:38: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
core/io/resource_format_binary.cpp:109:11: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/gles2/rasterizer_scene_gles2.cpp:144:57: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/unix/file_access_unix.cpp:249:46: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/voxel_light_baker.cpp:889:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/voxel_light_baker.cpp:1020:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/voxel_light_baker.cpp:1154:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/voxel_light_baker.cpp:2255:38: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/resources/bit_mask.cpp:336:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio/audio_stream.cpp:141:49: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio/audio_stream.cpp:150:19: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio/audio_stream.cpp:154:19: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio_server.cpp:86:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio_server.cpp:89:17: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
```
We're not formally using C++11 yet so those trigger compilation warnings
(at least with GCC 5):
./main/input_default.h:122:30: warning: non-static data member initializers only available with -std=c++11 or -std=gnu++11
CursorShape default_shape = CURSOR_ARROW;
^
Note: We may allow those eventually (especially for non-int static const),
but most of current occurrences were inconsistent with all other classes.
See also http://www.stroustrup.com/C++11FAQ.html#member-init
Passing an element reference of a vector to a push_back call to
that same vector can cause an access after free. This is because push_back
will resize the vector, reallocating if necessary, leaving the reference
referring to the freed memory.
Removed an instance of this usage here.
This allows more consistency in the manner we include core headers,
where previously there would be a mix of absolute, relative and
include path-dependent includes.
New APIs in 2D physics allow intersection queries filtered by CanvasLayer object instance id. Viewport keep an inventory of its descendant CanvasLayers and takes advantage of all that to test picking with the mouse/touch position correctly transformed for each CanvasLayer.
The margin value is exposed into the UI for shape ressource.
This value can be modified through set_margin and get from get_margin
or by using the property margin. Each time the margin is modified
the associated collision shape is recreated and the margin value is
used in ShapeBullet::prepare.
For debug purposes the boolean whether the recording is active or not were an editor property.
It has been removed to avoid users leaving it on true on close, causing it to be saved in the default_bus_layout
It was also renamed to better describe its functionality
related to issue: 20487
Implements an Audio bus effect that outputs the audio from the bus into a wav file
Now channels audio recording into an AudioStreamSample instead of saving to wav
This commit makes operator[] on Vector const and adds a write proxy to it. From
now on writes to Vectors need to happen through the .write proxy. So for
instance:
Vector<int> vec;
vec.push_back(10);
std::cout << vec[0] << std::endl;
vec.write[0] = 20;
Failing to use the .write proxy will cause a compilation error.
In addition COWable datatypes can now embed a CowData pointer to their data.
This means that String, CharString, and VMap no longer use or derive from
Vector.
_ALWAYS_INLINE_ and _FORCE_INLINE_ are now equivalent for debug and non-debug
builds. This is a lot faster for Vector in the editor and while running tests.
The reason why this difference used to exist is because force-inlined methods
used to give a bad debugging experience. After extensive testing with modern
compilers this is no longer the case.
-Project/Editor settings now show tooltips properly
-Settings thar require restart now will show a restart warning
-Video driver is now visible all the time, can be changed easily
-Added function to request current video driver
When the viewport's size.y becomes lower than 2, the storage->frame.current_rt->effects.mip_maps[0].sizes Vector during rendering becomes empty, resulting in crashes in at least GLES3. This is a temporary fix to stop rendering a viewport when its size is below 2 rather than below 1.
The rasterisers (both GLES3 and GLES2) were calculating their own frame delta time
This fix lets the rasterizers get the frame delta through the draw call
That way any regulations to the frame step from the main script will not cause particle systems to process at a different step than the rest of the Engine.
Remove unused rasterizer storage variable
frame.prev_tick variable were not used anywhere and has been removed
Physics2DDirectSpaceStateSW was applying the result limit to broadphase
collision detection instead of narrow. This is inconsistent with its 3D
variant, as well as the rest of the 2D direct space state functions.
Broadphase is now limited by INTERSECTION_QUERY_MAX like everything else,
and narrow phase is exited early when the result limit has been reached.
Fixes reported logically dead codes by Coverity
* image.cpp: Doesn't really need any modification. But to remove the bug
report then we have to move the MAX call away from the for loop
statement.
* rasterizer_gles3.cpp: Removes unnecessary elif condition since it is
checked earlier in the function
* collada.cpp: If stamement never reached due to macro ERR_CONTINUE does
the same.
* navigation_mesh.cpp: Variables should always be null - however, also
checked for the very same condition in their function call. Leaving this
for review (whether the function call is necessary or not)
* path_editor_plugin.cpp: If cancel is true, then it should restore the
edited value to the original provided.
http://docs.godotengine.org/en/3.0/classes/class_editorspatialgizmo.html#class-editorspatialgizmo-commit-handle
* spatial_editor_gizmos.cpp: the very condition of i >= 3 is
predetermined in the if case right before it. Thus case 1 is always '1'
and case 2 is always '-1'
* grid_map_editor.cpp: Same as above in spatial_editor_gizmos.cpp
* voxel_light_baker.cpp: Same as above in spatial_editor_gizmos.cpp
* visual_server.cpp: Same as above in spatial_editor_gizmos.cpp
* visual_script_expression.cpp: char '-' is already true in the switch
case mechanism. Thus it can never reach to default case.
* particles.cpp: Case 'PARAM_MAX' is unreachable due to index checking
right before the switch execution.
* shader_language.cpp: Invalid index is handled in switch default case.
`type < TYPE_FLOAT && type > TYPE_VEC4` -> `(type < TYPE_FLOAT || type > TYPE_VEC4`)
Fixes the "always false problem" in TODO comment.
