Commit graph

297 commits

Author SHA1 Message Date
PouleyKetchoupp
d12b44ca13 Move sync to physics to StaticBody2D
Now static body is used for moving platforms through kinematic motion
property, so sync to physics needs to be in StaticBody2D instead of
CharacterBody2D.

Constant kinematic motion is also supported in combination with sync to
physics for smoother movements.
2021-07-15 10:13:27 -07:00
fabriceci
cee814e4df Fixing 2D moving platform logic
Fixing by applying the movement in two steps, first the platform
movement, and then the body movement. Plus, add the platform movement
when we are on_wall.
2021-07-15 11:54:43 +02:00
PouleyKetchoupp
cf1ddfdb90 Make move_and_slide collision detection more accurate
More accurate unsafe motion calculation
* Safe and unsafe motion are calculated by dichotomy with a limited
number of steps. It's good for performance, but on long motions that
either collide near the beginning or near the end, the result can be
very imprecise.
* Now a factor 0.25 or 0.75 is used to converge faster when this case
happens, which allows longer motions to get more accurate collision
detection.
* Makes snap collision more precise, and helps with cases where diagonal collision on the border of a platform can lead to the character being stuck.

Additional improvements to move_and_slide:
* Handle slide canceling in move_and_collide with 0 velocity instead of
not applying it.
* Better handling of snap with custom logic to cancel sliding.
* Remove small jittering when using stop on slope, by canceling the
motion completely when the resulting motion is less than margin instead
of always projecting to the up direction (in both body motion and snap).

Co-authored-by: fabriceci <fabricecipolla@gmail.com>
2021-07-01 15:15:42 -07:00
Rémi Verschelde
915344fe76
Merge pull request #49834 from nekomatata/physics-disable-modes
Add support for controlling physics nodes' behavior when disabled
2021-06-30 20:36:36 +02:00
Rémi Verschelde
a02620f3a5
Merge pull request #50009 from reduz/fix-suffixes-and-degrees
Fix editor suffixes and degrees conversion
2021-06-30 18:47:40 +02:00
PouleyKetchoupp
5cbdc7a0ac Add support for controlling physics nodes' behavior when disabled
New property disable_mode to set different behaviors:
Remove: remove from physics simulation
MakeStatic: change body mode to static (doesn't affect area and soft body)
KeepActive: do nothing

Extra change:
Handle disable/enable node state with specific notifications, in order
to differentiate global pause from disabled nodes.
2021-06-30 09:20:44 -07:00
reduz
75688772b3 Fix editor suffixes and degrees conversion
* Functions to convert to/from degrees are all gone. Conversion is done by the editor.
* Use PROPERTY_HINT_ANGLE instead of PROPERTY_HINT_RANGE to edit radian angles in degrees.
* Added possibility to add suffixes to range properties, use "min,max[,step][,suffix:<something>]" example "0,100,1,suffix:m"
* In general, can add suffixes for EditorSpinSlider
Not covered by this PR, will have to be addressed by future ones:

* Ability to switch radians/degrees in the inspector for angle properties (if actually wanted).
* Animations previously made will most likely break, need to add a way to make old ones compatible.
* Only added a "px" suffix to 2D position and a "m" one to 3D position, someone needs to go through the rest of the engine and add all remaining suffixes.
* Likely also need to track down usage of EditorSpinSlider outside properties to add suffixes to it too.
2021-06-30 12:38:25 -03:00
Rémi Verschelde
bcd1fc832f
Merge pull request #49901 from nekomatata/move-and-collide-fix-slide
Fix move_and_collide causing sliding on slopes
2021-06-30 02:18:01 +02:00
PouleyKetchoupp
9758a75221 Fix move_and_collide causing sliding on slopes
Make sure the direction of the motion is preserved, unless the depth is
higher than the margin, which means the body needs depenetration in any
direction.

Also changed move_and_slide to avoid sliding on the first motion, in
order to avoid issues with unstable position on ground when jumping.

Co-authored-by: fabriceci <fabricecipolla@gmail.com>
2021-06-28 17:17:52 -07:00
Lightning_A
e28fd07b2b Rename instance()->instantiate() when it's a verb 2021-06-19 20:49:18 -06:00
Rémi Verschelde
3e8620c275
Merge pull request #49475 from nekomatata/kinematic-collision-rid
Expose collider RID in 2D/3D kinematic collision
2021-06-18 12:32:26 +02:00
Aaron Franke
8b692e8872
Add PROPERTY_USAGE_NONE and use it 2021-06-17 19:10:26 -04:00
PouleyKetchoupp
0eb51b31d4 Expose collider RID in 2D/3D kinematic collision
Can be useful to access the colliding body information for bodies
created with the physics server directly.
2021-06-09 18:26:00 -07:00
PouleyKetchoupp
863560c6ef Use degrees instead of rad for floor_max_angle property in CharacterBody 2021-06-08 16:00:31 -07:00
PouleyKetchoupp
23abac9325 Linear velocity cleanup
CharacterBody has a linear_velocity property to replace the argument in
move_and_slide.

StaticBody handles reporting linear/angular velocity correctly when
kinematic motion is used (in 3D, used in vehicle and navigation).
2021-06-04 11:40:36 -07:00
PouleyKetchoupp
b2bd9f4e51 Safe margin cleanup
Safe margin property on CharacterBody only, used as argument in
move_and_collide.

Removed kinematic_safe_margin in 3D physics server, not really useful
and now harmonized with 2D.
2021-06-04 11:40:36 -07:00
PouleyKetchoupp
65822559ce Support for kinematic_motion in StaticBody
Does the same thing as simulate motion from RigidBody in Kinematic mode,
and CharacterBody (previously KinematicBody).

Added support for constant linear/angular velocity with kinematic_motion
in StaticBody, which moves the body in physics.

Updated documentation for StaticBody and CharacterBody to describe their
functionalities more accurately.
2021-06-04 11:40:36 -07:00
PouleyKetchoupp
ee4b756a51 More explanatory names for RigidBody modes
MODE_DYNAMIC instead of MODE_RIGID
MODE_DYNAMIC_LOCKED instead of MODE_CHARACTER

No more special case for sleeping behavior for MODE_DYNAMIC_LOCKED
(MODE_CHARACTER was forcing the body not to sleep, which is redundant
with can_sleep and wasn't done in Bullet).
2021-06-04 11:40:36 -07:00
PouleyKetchoupp
287c3900fd Properties for move_and_slide and remove move_and_slide_with_snap
- snap property to replace move_and_slide_with_snap()
- floor_max_angle, stop_on_slope, infinite_inertia, max_slides,
up_direction properties to replace arguments from move_and_slide()
- up direction now defaults to Vector3.UP and Vector2.UP
2021-06-04 11:40:36 -07:00
PouleyKetchoupp
ba13d23140 KinematicBody split between new CharacterBody and PhysicsBody
PhysicsBody now has methods move_and_collide/test_move and needed
properties for these methods: safe margin, locked axes (3D only).

Moved collision_exceptions from StaticBody to PhysicsBody for 3D
(same as 2D, and conforms to documentation).

RigidBody doesn't have test_motion method anymore, it's now redundant
with PhysicsBody.test_move.
2021-06-04 11:40:36 -07:00
Rémi Verschelde
c340ed6394
Merge pull request #42742 from madmiraal/fix-12215
Return RID instead of Object id in area-body_shape_entered-exited signals.
2021-05-18 20:00:48 +02:00
rafallus
cfa06f0f76 Unexpose _direct_state_changed in PhysicsBody
Removed _direct_state_changed bindings
Affects 2D and 3D nodes
Callbacks now use Callable
Tests were changed accordingly
2021-04-22 23:20:58 -05:00
Marcel Admiraal
071871b787 Move collision layer and mask into CollisionObject. 2021-04-20 10:38:42 +01:00
Nathan Franke
2a8c59c171
Use Array for node configuration warnings
Previously, the warnings were passed as a string and delimitation of which were hard coded at each implementation.
2021-04-11 23:25:38 -05:00
Anshul7sp1
91181c2086 Fixes small typos and grammar correction 2021-03-12 19:05:16 +05:30
Marcel Admiraal
38f2e32e32 Return RID instead of Object id in area-body_shape_entered-exited signals. 2021-03-06 10:48:17 +00:00
Rafał Mikrut
003bb8e1a8 Initialize class variables with default values in scene/ [1/2] 2021-02-07 22:29:31 +01:00
Aaron Franke
9199a681de
Use real_t in physics nodes 2021-01-29 19:59:58 -05:00
Rémi Verschelde
b5334d14f7
Update copyright statements to 2021
Happy new year to the wonderful Godot community!

2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.

We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)

Here's to a great year 2021 for all Godot users 🎆
2021-01-01 20:19:21 +01:00
Marcel Admiraal
5b937d493f Rename empty() to is_empty() 2020-12-28 10:39:56 +00:00
Marcel Admiraal
981fbcd3e0 Remove RigidBody weight property 2020-11-27 17:39:20 +00:00
reduz
127458ed17 Reorganized core/ directory, it was too fatty already
-Removed FuncRef, since Callable makes it obsolete
-Removed int_types.h as its obsolete in c++11+
-Changed color names code
2020-11-07 20:17:12 -03:00
reduz
ee06a70ea6 Refactor MethodBind to use variadic templates
Removed make_binders and the old style generated binders.
2020-10-18 12:28:44 +02:00
Marcel Admiraal
a17fdaef09 Remove old RigidBody layers property and methods. 2020-10-13 16:59:49 +01:00
Rémi Verschelde
12091b39d2
Merge pull request #38743 from arrowinaknee/node-config-warnings
Update all get_configuration_warning() to retrieve warnings from the parent
2020-10-01 14:03:29 +02:00
Rémi Verschelde
67e4082b1e
Merge pull request #37350 from aaronfranke/force-impulse
Refactor physics force and impulse code to use (force, position) order
2020-07-02 18:39:16 +02:00
Marcel Admiraal
c4650540d4 Normalise p_up_direction vector in move_and_slide() and
move_and_slide_with_snap() and fix tolerance in
move_and_slide_with_snap() max floor angle.
2020-06-16 09:56:08 +01:00
Aaron Franke
ba27deef06
Refactor physics force and impulse code 2020-06-02 23:18:59 -04:00
ArrowInAKnee
9fc2b0fddc Update all get_configuration_warning to retrieve warnings from the parent 2020-05-16 16:07:42 +03:00
Rémi Verschelde
0ee0fa42e6 Style: Enforce braces around if blocks and loops
Using clang-tidy's `readability-braces-around-statements`.
https://clang.llvm.org/extra/clang-tidy/checks/readability-braces-around-statements.html
2020-05-14 21:57:34 +02:00
Rémi Verschelde
07bc4e2f96 Style: Enforce separation line between function definitions
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
  -o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
  -o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```

This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.

This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.

Part of #33027.
2020-05-14 16:54:55 +02:00
Rémi Verschelde
0be6d925dc Style: clang-format: Disable KeepEmptyLinesAtTheStartOfBlocks
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.

This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.

There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).

Part of #33027.
2020-05-14 16:54:55 +02:00
Rémi Verschelde
e956e80c1f Style: clang-format: Disable AllowShortIfStatementsOnASingleLine
Part of #33027, also discussed in #29848.

Enforcing the use of brackets even on single line statements would be
preferred, but `clang-format` doesn't have this functionality yet.
2020-05-10 13:12:16 +02:00
Juan Linietsky
f8ef38efed Add proper type to most public API uses of Array 2020-04-21 12:16:45 -03:00
lupoDharkael
95a1400a2a Replace NULL with nullptr 2020-04-02 13:38:00 +02:00
Rémi Verschelde
eaaee63b62 doc: Update classref with node renames
A few extra renames for classes which were missed in last week's PRs.
2020-03-30 18:23:02 +02:00
Rémi Verschelde
0c320a6bf3 More server renames for consistency after #37361 2020-03-28 13:20:48 +01:00
dankan1890
06e8740184 Fixed missed occurrences in #37361 renamings. 2020-03-28 12:37:44 +01:00
Juan Linietsky
a6f3bc7c69 Renaming of servers for coherency.
VisualServer -> RenderingServer
PhysicsServer -> PhysicsServer3D
Physics2DServer -> PhysicsServer2D
NavigationServer -> NavigationServer3D
Navigation2DServer -> NavigationServer2D

Also renamed corresponding files.
2020-03-27 15:21:27 -03:00
Rémi Verschelde
f742dabafe Signals: Manually port most of remaining connect_compat uses
It's tedious work...

Some can't be ported as they depend on private or protected methods
of different classes, which is not supported by callable_mp (even if
it's a class inherited by the current one).
2020-02-28 14:24:09 +01:00
Juan Linietsky
33b5c57199 Variant: Added 64-bit packed arrays, renamed Variant::REAL to FLOAT.
- Renames PackedIntArray to PackedInt32Array.
- Renames PackedFloatArray to PackedFloat32Array.
- Adds PackedInt64Array and PackedFloat64Array.
- Renames Variant::REAL to Variant::FLOAT for consistency.

Packed arrays are for storing large amount of data and creating stuff like
meshes, buffers. textures, etc. Forcing them to be 64 is a huge waste of
memory. That said, many users requested the ability to have 64 bits packed
arrays for their games, so this is just an optional added type.

For Variant, the float datatype is always 64 bits, and exposed as `float`.

We still have `real_t` which is the datatype that can change from 32 to 64
bits depending on a compile flag (not entirely working right now, but that's
the idea). It affects math related datatypes and code only.

Neither Variant nor PackedArray make use of real_t, which is only intended
for math precision, so the term is removed from there to keep only float.
2020-02-25 12:55:53 +01:00
Juan Linietsky
69c95f4b4c Reworked signal connection system, added support for Callable and Signal objects and made them default. 2020-02-20 08:24:50 +01:00
Rémi Verschelde
c48237967a
Merge pull request #36145 from akien-mga/remove-deprecated-friction-bounce
Remove deprecated PhysicsBody friction and bounce parameters
2020-02-12 21:49:38 +01:00
Juan Linietsky
cf8c679a23 ObjectID converted to a structure, fixes many bugs where used incorrectly as 32 bits. 2020-02-12 14:24:54 -03:00
Rémi Verschelde
1206bdb71b Remove deprecated PhysicsBody friction and bounce parameters
They were replaced in 3.1 by PhysicsMaterial properties via #12403.
2020-02-12 13:39:55 +01:00
Marcel Admiraal
907adb37ce Fixes get_floor_normal() returning the user defined floor_normal.
When there is no collision with a floor the get_floor_normal() function
should return the zero vector to be consistent with get_floor_velocity().

Renames floor_normal to up_direction in all bindings.

Updates the documentation of get_floor_normal() and get_floor_velocity()
to make it clear when the values are valid. Updates the documentation for
move_and_slide() and move_and_slide_with_snap() to use the new up_direction
parameter name.
2020-01-15 10:13:35 +01:00
Andrea Catania
9f1f4620e0 Added function to expose floor normal, useful to correctly calculate player velocity.
This work has been kindly sponsored by IMVU.
2020-01-10 14:58:19 +01:00
Rémi Verschelde
a7f49ac9a1 Update copyright statements to 2020
Happy new year to the wonderful Godot community!

We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.

Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
2020-01-01 11:16:22 +01:00
Hugo Locurcio
0a5b30b14a
Add a range property hint for the number of contacts reported
This closes #34505.
2019-12-21 22:27:10 +01:00
Marcel Admiraal
750f343e4a Ensure move_and_slide() is consistent between the 2D and 3D versions.
In the 3D version:
- Partially revert #20908 that was reverted in the 2D version as part
  of #21653. This ensures that the Vector returned is always perpendicular
  to the surface collided with; and not the floor_normal Vector passed to
  the function when on a floor.
- Include an update of the floor velocity before multiplying by the time
  delta, which was added to the 2D version as part of commit 13a8014.

In the 2D version:
- Use the Vector2.slide() function instead of Vector2.tangent() to adjust
  the amount of motion the stop_on_slope undoes to ensure that it is in the
  right direction. This is a implementation of the 3D approach from #30588.
- Combine the !found_collision and motion == Vector2() checks for break.
- Other minor formating changes to make the functions look identical.

Also renamed some variables to align with their use.
2019-12-02 08:35:50 +01:00
Rémi Verschelde
dec10dd776
Merge pull request #32051 from qarmin/some_error_explanation
Added some obvious errors explanations
2019-09-25 11:51:54 +02:00
qarmin
17732fe698 Added some obvious errors explanations 2019-09-25 10:28:50 +02:00
luz.paz
91ecd7b6a6 Fix misc. source comment typos
Found using `codespell -q 3 -S ./thirdparty,*.po -L ang,ba,cas,dof,doubleclick,fave,hist,leapyear,lod,nd,numer,ois,paket,seeked,sinc,switchs,te,uint -D ~/Projects/codespell/codespell_lib/data/dictionary.txt `
2019-09-19 14:36:52 -04:00
Rémi Verschelde
720065c721
Merge pull request #31476 from SoulForMachine/fix-move-and-slide-error
Prevent move_and_slide() to generate an error.
2019-09-03 12:51:42 +02:00
Milan Davidovic
c12ce2b4dd Prevent move_and_slide() to generate an error.
When moving KinematicBody2D from one scene to another and not freeing
the old scene, the first call to move_and_slide() in the new scene will
generate an error because KinematicBody2D keeps internaly a
RID on_floor_body of a body resource in the old scene which no more has
a space assigned.

To fix this, on_floor_body is set to empty RID in response to
NOTIFICATION_ENTER_TREE notification of KinematicBody2D and
KinematicBody. Also all other data related to move_and_slide() is reset:
floor, ceiling, wall flags, colliders vector, floor_velocity.

This fixes #31416.
2019-08-26 15:10:15 +02:00
Rémi Verschelde
bfed4b6a97
Merge pull request #31014 from DavidSichma/kinematic_angle
Fix floor_max_angle comparison for impossible angles
2019-08-23 09:10:38 +02:00
RaphaelHunter
74713fe970 Fix custom inertia in physics2d, closes#30838 2019-08-22 20:30:03 +08:00
Tomasz Chabora
af5e0fff66 Remove ERR_EXPLAIN from scene/* code 2019-08-09 13:54:52 +02:00
David Sichma
2fae8832c5 Fix floor_max_angle comparison for impossible angles 2019-08-01 12:54:19 +02:00
Hugo Locurcio
0243dc53b8
Tweak Area and PhysicsBody damping setting hints for consistency
This partially addresses #19182.
2019-07-31 13:57:13 +02:00
Hugo Locurcio
ff7184c5cb
Improve the node configuration warning display
- Refer to properties explicitly when possible
- When multiple warnings are returned, always separate them by one
  blank line to make them easier to distinguish
- Improve grammar and formatting
2019-07-09 00:18:00 +02:00
Bojidar Marinov
0c4c36d823
Add default values to the editor help, docs, and generated RST
Also, make spacing of "=" in the editor help a bit more consistent.
Closes #16086
2019-06-27 18:29:35 +03:00
Rémi Verschelde
6d16f2f053 Fix error macro calls not ending with semicolon
It's not necessary, but the vast majority of calls of error macros
do have an ending semicolon, so it's best to be consistent.
Most WARN_DEPRECATED calls did *not* have a semicolon, but there's
no reason for them to be treated differently.
2019-06-11 14:49:34 +02:00
qarmin
856a8226a5 Small fixes, mostly dupicated code 2019-04-08 11:03:37 +02:00
Kanabenki
3f64215a43 Add missing check for 2d physics bounce and friction setters
The override check was already present for 3d physics but missing for 2d
2019-03-18 15:30:26 +01:00
Juan Linietsky
4f041d3afa Specifically error when users try to use sync to physics and move and slide, closes #26545 2019-03-04 09:53:02 -03:00
Juan Linietsky
9dfe3b6d9e Ensure move and slide snap respects stop on slope, fixes #26180 2019-02-23 10:24:21 -03:00
Juan Linietsky
87b303aa95 Fixed bugs in test body motion and removed unnecesary test in move_and_slide. Fixes #25968 2019-02-21 17:21:36 -03:00
Juan Linietsky
0cee7ab4c9 Change snapping to only happen when the floor normal remains as floor, fixes #22312 2019-02-16 15:50:31 -03:00
Juan Linietsky
c54330c6b0 Make sure stop on slope can have a tiny bit of precision edge. 2019-02-16 11:19:47 -03:00
Rémi Verschelde
b16c309f82 Update copyright statements to 2019
Happy new year to the wonderful Godot community!
2019-01-01 12:58:10 +01:00
piratesephiroth
0e94afbc92 fix stop_on_slope affecting sliding up slopes 2018-12-14 16:02:43 +01:00
DualMatrix
86472ad5a9 Fixed using move_and_slide with stop_on_slope stopping too early
This makes it stop exactly on the slope, I'm not 100% sure if this if this is the correct fix let me know what you think.

Fixes #23675
2018-11-29 02:24:33 +01:00
Juan Linietsky
0032345618 Make sure sync to physics is disabled in editor, fixes #20230 2018-11-21 22:22:43 -03:00
Rémi Verschelde
193d695a1a
Merge pull request #17530 from bojidar-bg/17516-detect-delta
Make it possible to call move_and_slide from _process, even if it is not recommended
2018-11-12 21:14:15 +01:00
Rémi Verschelde
2815e708a0
Merge pull request #23090 from DavidSichma/inconsistent-kinematic
Consistency in KinematicBody
2018-11-12 20:30:38 +01:00
Bojidar Marinov
d94c76a199
Make it possible to call move_and_slide from _process, even if it is not recommended
Previously, it would reuse the _physics_process delta, causing it to move faster on faster framerates

Fixes #17516
2018-11-08 20:34:34 +02:00
Juan Linietsky
f2e54057ae -Moved EditorDefaultValue to ClassDB, made it core
-Removed one and zero hints for properties, replaced by default value
2018-11-08 11:30:59 -03:00
Guilherme Recchi Cardozo
3fb2069d39 Add method get_collision_exceptions
Adding this method to PhysicsBody, PhysicsBody2D and
SoftBody. It returns a list of nodes included in
collision exceptions.

Fixes #23235, cheers!
2018-11-01 06:41:34 -03:00
David Sichma
6ec4da2e3b Fix inconsistency in KinematicBody
- moved new infinite_inertia argument of move_and_slide and
move_and_slide_with_snap in KinematicBody and KinematicBody2D to the
end if not already there. This makes the order of arguments consistent
and should keep projects from 3.0 compatible as this argument did not
exist in 3.0. Docs updated accordingly.
- renamed max_bounces to max_slides for consistency. Docs updated
accordingly.
- the argument infinite_inertia in test_move is now optional, as it is
in every other movement related method. This closes #22829.
2018-10-17 17:22:14 +02:00
Rémi Verschelde
277b24dfb7 Make core/ includes absolute, remove subfolders from include path
This allows more consistency in the manner we include core headers,
where previously there would be a mix of absolute, relative and
include path-dependent includes.
2018-09-12 09:52:22 +02:00
Rémi Verschelde
60570a5e60 PhysicsBody: Don't create PhysicsMaterial override for default friction/bounce
And don't save physics_material_override if null.
2018-09-02 15:08:43 +02:00
Kelly Thomas
1dc8e7c05f Improve ClassDB information for some some signal parameters 2018-09-01 18:05:51 +08:00
Rémi Verschelde
060988408b Physics: Properly obsolete friction and bounce properties
Without this change any new PhysicsBody would show deprecation warnings
due to default values for friction and bounce being defined.

It also enforced a physics material override even when using default
values.
2018-08-29 18:44:42 +02:00
Rémi Verschelde
3b01bf94ad Fix operator precedence in PhysicsBody2D::set_weight
Fixes #16038.
2018-08-29 08:37:08 +02:00
Rémi Verschelde
52466d57e9 Make some debug prints verbose-only, remove others 2018-08-24 14:59:01 +02:00
Rémi Verschelde
ab3716bd46 Revert "Take CanvasLayer transform into account for 2D physics"
This reverts commit 4839e5f6d9.

Fixes #21289.
2018-08-23 21:49:24 +02:00
Pedro J. Estébanez
4839e5f6d9 Take CanvasLayer transform into account for 2D physics
Fixes #18073.
2018-08-21 20:10:15 +02:00
Andrea Catania
0010d9c82a Added ray shape and move_and_slide with snapping on 3D.
Added stop_on_slope on 2d part
2018-08-19 13:45:23 +02:00
Juan Linietsky
c02fb271fd apply a threshold for floor angle, fixes #16037, fixes #15632 2018-08-10 13:07:52 -03:00
Juan Linietsky
14fd797c53
Merge pull request #20381 from AndreaCatania/phymat_2
Improved Physics material
2018-08-07 15:31:26 -03:00
Andrea Catania
5e65e28eed Removed physics material combination mode. Added rough and absorbent parameter to material. Fixed 'change' signal connection 2018-08-07 19:38:04 +02:00
Rémi Verschelde
12254594ac Fix PhysicsBody build with deprecated=no
Fixes #20483.
2018-07-27 15:34:58 +02:00
Hein-Pieter van Braam
0e29f7974b Reduce unnecessary COW on Vector by make writing explicit
This commit makes operator[] on Vector const and adds a write proxy to it.  From
now on writes to Vectors need to happen through the .write proxy. So for
instance:

Vector<int> vec;
vec.push_back(10);
std::cout << vec[0] << std::endl;
vec.write[0] = 20;

Failing to use the .write proxy will cause a compilation error.

In addition COWable datatypes can now embed a CowData pointer to their data.
This means that String, CharString, and VMap no longer use or derive from
Vector.

_ALWAYS_INLINE_ and _FORCE_INLINE_ are now equivalent for debug and non-debug
builds. This is a lot faster for Vector in the editor and while running tests.
The reason why this difference used to exist is because force-inlined methods
used to give a bad debugging experience. After extensive testing with modern
compilers this is no longer the case.
2018-07-26 00:54:16 +02:00
Tiger Caldwell
40c7716586 Modified RigidBody, PhysicsDirectBodyState, PhysicsServer, and their respective 2D counterparts to be more consistent and to include more useful methods.
RigidBody:
- Added add_central_force
- Added add_force
- Added add_torque
- Added apply_central_impulse

RigidBody2D:
- Added add_central_force
- Added add_torque
- Added apply_central_impulse
- Added apply_torque_impulse

PhysicsDirectBodyState:
- Added apply_central_impulse

Physics2DDirectBodyState:
- Added add_central_force
- Added add_force
- Added add_torque
- Added apply_central_impulse
- Added apply_impulse
- Added apply_torque_impulse

PhysicsServer:
- Added body_add_force
- Added body_add_torque
- Added body_add_central_force
- Added body_apply_central_impulse

Physics2DServer:
- Added body_add_torque
- Added body_add_central_force
- Added body_apply_central_impulse
- Added body_apply_torque_impulse

Also fixed some small bugs along the way
2018-07-24 05:00:56 -04:00
Juan Linietsky
1ad20dc2f1
Merge pull request #12403 from AndreaCatania/phymat
Physics material
2018-07-23 07:37:03 -03:00
Juan Linietsky
13a801430b Further fixes to KinematicBody2D API, support for sync motion in moving objects 2018-07-17 08:58:04 -03:00
Juan Linietsky
e1f2feec2e Changes to how snap works (I think this makes more sense now) 2018-07-16 21:30:44 -03:00
Juan Linietsky
063a22851a -Added support for raycast in KinematicBody2D
-Added support for snapping in KinematicBody2D
2018-07-16 20:04:07 -03:00
AndreaCatania
5f66734d2d Implemented physics material
Hidden a function

Fixed travis static check
2018-05-11 03:23:09 +02:00
Andrea Catania
39fb83630d
Added forgotten infinite_inertia to bindings
Related to this comment: https://github.com/godotengine/godot/pull/16757#discussion_r169470394
2018-02-21 08:42:36 +01:00
Rémi Verschelde
497a4e9e25
Merge pull request #16757 from AndreaCatania/kinpush
Improved kinematic body, Now can move rigid body
2018-02-20 15:41:10 +01:00
Andrea Catania
6ed392f47a Improved kinematic body 2D and 3D, Now can move rigid body 2018-02-20 12:43:47 +01:00
Artem Varaksa
d35e486228 Clean up some bad words from code comments 2018-02-17 16:00:39 +03:00
Bernhard Liebl
e9237d83c7 Fix crash on deleted rigidbodies without contact monitor (issue 15904) 2018-01-21 12:46:13 +01:00
Rémi Verschelde
9f479f096c Fix typos in code and docs with codespell
Using v1.11.0 from https://github.com/lucasdemarchi/codespell
2018-01-18 22:01:42 +01:00
Juan Linietsky
a26e6c8215 Renamed tree_exited to tree_exiting. tree_exited is now used for actual out of tree notification.
Updated doc accordingly.
2018-01-12 08:29:24 -03:00
Bojidar Marinov
9b8e8b2220
Bind many more properties to scripts
Notable potentially breaking changes:
- PROPERTY_USAGE_NOEDITOR is now PROPERTY_USAGE_STORAGE | PROPERTY_USAGE_NETWORK, without PROPERTY_USAGE_INTERNAL
- Some properties were renamed, and sometimes even shadowed by new ones
- New getter methods (some virtual) were added
2018-01-12 00:58:14 +02:00
Rémi Verschelde
e4213e66b2 Add missing copyright headers and fix formatting
Using `misc/scripts/fix_headers.py` on all Godot files.
Some missing header guards were added, and the header inclusion order
was fixed in the Bullet module.
2018-01-05 01:22:23 +01:00
Rémi Verschelde
b50a9114b1 Update copyright statements to 2018
Happy new year to the wonderful Godot community!
2018-01-01 14:40:47 +01:00
Rémi Verschelde
13c2ff9320 Style: Apply new clang-format 5.0 style to all files 2017-12-07 08:02:00 +01:00
Eric Wiltfang
7dd9e5c57c Fix the prevention for sliding on slopes in the 2d version of move_and_slide
Done by using the same method the 3d counterpart uses.

Fixes #13063.
2017-11-20 01:42:44 +01:00
Juan Linietsky
192a4d7de5 Reworked how servers preallocate RIDs, should fix #10970 2017-11-09 23:35:34 -03:00
Poommetee Ketson
9cadb9e5f3 Bind unbound enums, rearrange some by value 2017-10-22 01:58:02 +07:00
AndreaCatania
4537977d6d Renamed fixed_process to physics_process 2017-09-30 16:19:07 +02:00
Aron de Castro
6e0892f223 Added to kinematicbody2d the copy and paste of the API friendler of KinematicBody 2017-09-10 13:07:47 -03:00
Ignacio Etcheverry
c16d00591b DocData and type hints fixes
- Makes vararg methods automatically use PROPERTY_USAGE_NIL_IS_VARIANT on return types
- Completely removes the ":type" suffix for method names. Virtual methods must use the MethodInfo constructors that takes Variant::Type or PropertyHint as the first parameter for the return type (with CLASS_INFO as a helper to get the PropertyInfo). Parameters must use PROPERTY_HINT_RESOURCE_TYPE and hint string.
- PROPERTY_USAGE_NIL_IS_VARIANT is no longer needed for parameters, because parameters cannot be void.
- Adds missing PROPERTY_USAGE_NIL_IS_VARIANT to virtual and built-in methods that return Variant.
2017-08-29 19:40:21 +02:00
Rémi Verschelde
7ad14e7a3e Dead code tells no tales 2017-08-27 22:13:45 +02:00
Rémi Verschelde
bd282ff43f Use HTTPS URL for Godot's website in the headers 2017-08-27 14:16:55 +02:00
Hein-Pieter van Braam
cacced7e50 Convert Object::cast_to() to the static version
Currently we rely on some undefined behavior when Object->cast_to() gets
called with a Null pointer. This used to work fine with GCC < 6 but
newer versions of GCC remove all codepaths in which the this pointer is
Null. However, the non-static cast_to() was supposed to be null safe.

This patch makes cast_to() Null safe and removes the now redundant Null
checks where they existed.

It is explained in this article: https://www.viva64.com/en/b/0226/
2017-08-24 23:08:24 +02:00
Juan Linietsky
2cc8309249 Merge pull request #10351 from neikeq/enums-are-for-the-weak
ClassDB: Provide the enum name of integer constants
2017-08-21 19:56:08 -03:00
Ignacio Etcheverry
32dd9a9f66 ClassDB: Provide the enum name of integer constants 2017-08-20 22:07:43 +02:00
Juan Linietsky
541fdffc0a Merge pull request #10319 from neikeq/pr-engine-editor-hint
Adds Engine::is_editor_hint() method
2017-08-20 12:55:46 -03:00
Ignacio Etcheverry
90b8a5b71e Removes editor_hint from SceneTree 2017-08-19 01:29:45 +02:00
Nathan Hold
fb40846dca Fix missing and incorrect values in return value of _move method 2017-08-12 19:59:39 +10:00
Ignacio Etcheverry
78619a5866 Fixes method definitions with extra number of arguments 2017-08-10 07:17:51 +02:00
Ignacio Etcheverry
2f290038d6 Removes type information from method binds 2017-08-10 07:17:50 +02:00
Juan Linietsky
de9fb90dbf Warn about resizing a rigidbody (2D or 3D), covers the most common cases, closes #7615 2017-08-05 16:06:15 -03:00
Johan Manuel
00afca31c6 Use the gravity constant to calculate weights 2017-07-05 15:14:12 +02:00
Juan Linietsky
bc509ac7bd Simplified 2D Kinematicbody.. 3D will wait a bit. 2017-06-24 12:34:29 -03:00
Juan Linietsky
6ba1e4677b -Trigger shapes removed in 2D, they became obsolete long ago when areas could detect their own overlap
-Added ability to disable individual collisionshape/polygon
-Moved One Way Collision to shape, allowing more flexibility
-Changed internals of CollisionObject, shapes are generated from child nodes on the fly, not stored inside any longer.
-Modifying a CollisionPolygon2D on the fly now works, it can even be animated.

Will port this to 3D once well tested. Have fun!
2017-06-23 23:39:52 -03:00
Poommetee Ketson
6c44fff508 Refactor layer_mask to collision_layer 2017-06-14 10:58:34 +07:00
gamemanj
0a4dde93d4 Apply is_ceiling/is_wall swap fix to 2D move_and_slide (minus explaination)
As it turns out, is_ceiling would be true when hitting a wall,
 and is_wall would be true momentarily when hitting a ceiling.

This makes a tiny one-line change to fix that.
Without trying to explain the code for anyone else having to
 mess around with it.
2017-04-15 10:24:36 +01:00
Rémi Verschelde
df61dc4b2b Add "Godot Engine contributors" copyright line 2017-04-08 00:11:42 +02:00
Rémi Verschelde
02f9851d0d Merge pull request #8259 from bojidar-bg/move-slide-wall-fix
Fix is_move_and_slide_on_wall, make move_and_slide floor angle configurable
2017-04-05 01:24:19 +02:00
Bojidar Marinov
289abd3710
Fix is_move_and_slide_on_wall, make move_and_slide floor angle configurable
Fixes #7313
2017-04-04 18:32:27 +03:00
Ferenc Arn
1a620bd5fa Made slide and reflect active verbs acting on itself in Vector2 and Vector3.
This is in alignment with other functions in vector classes.
Also added checks for normalization, fixed the sign of reflect (which now corresponds to reflection along a plane mathematically), added bounce method and updated docs.

Fixes #8201.
2017-04-03 10:02:12 -05:00
Rémi Verschelde
5dbf1809c6 A Whole New World (clang-format edition)
I can show you the code
Pretty, with proper whitespace
Tell me, coder, now when did
You last write readable code?

I can open your eyes
Make you see your bad indent
Force you to respect the style
The core devs agreed upon

A whole new world
A new fantastic code format
A de facto standard
With some sugar
Enforced with clang-format

A whole new world
A dazzling style we all dreamed of
And when we read it through
It's crystal clear
That now we're in a whole new world of code
2017-03-05 16:44:50 +01:00
Hein-Pieter van Braam
411ee71b4d Rename the _MD macro to D_METHOD
This new name also makes its purpose a little clearer

This is a step towards fixing #56
2017-02-13 12:50:02 +01:00
Hein-Pieter van Braam
0f687f0ccb Remove use of _SCS from ADD_METHOD
This saves typing and is a step towards fixing #56
2017-02-13 10:37:47 +01:00