* Map is unnecessary and inefficient in almost every case.
* Replaced by the new HashMap.
* Renamed Map to RBMap and Set to RBSet for cases that still make sense
(order matters) but use is discouraged.
There were very few cases where replacing by HashMap was undesired because
keeping the key order was intended.
I tried to keep those (as RBMap) as much as possible, but might have missed
some. Review appreciated!
These typedefs don't save much typing compared to the full `Ref<Resource>`
and `Ref<RefCounted>`, yet they sometimes introduce confusion among
new contributors.
* API kept the same (Although functions could be renamed to set_metadata/get_metadata in a later PR), so not much should change.
* Metadata now exposed as individual properties.
* Properties are editable in inspector (unless metadata name begins with _) under the metadata/ namespace.
* Added the ability to Add/Remove metadata properties to the inspector.
This is a functionality that was requested very often, that makes metadata work a bit more similar to custom properties in Blender.
The EditorProperty UI elements for project settings are created from
SectionedInspector, which has a prefix added to each property path. Each
EditorProperty needs to be made aware of this path so copy_property_path
copies the full path, and not just the suffix.
Fixes#59020.
* Very old macros from the time Godot was created.
* Limited arguments to 5 (then later changed to 8) in many places.
* They were replaced by C++11 Variadic Templates.
* Renamed methods that take argument pointers to have a "p" suffix. This was used in some places and not in others, so made it standard.
* Also added a dereference check for Variant*. Helped catch a couple of bugs.
This reverts commit a988fad9a0.
As discussed in #57725 and clarified in #57788, `SNAME` is not meant to be used
everywhere but only in critical code paths. For theme methods specifically, it
was by design that only getters use `SNAME` and not setters.
This reverts #51619 and fixes the issue properly, as well as enabling
`fit_content_height` which is necessary following #57304.
Fixes#57174.
Also adds a placeholder for property and signal tooltips with no description,
factoring the code while at it.
Co-authored-by: bruvzg <7645683+bruvzg@users.noreply.github.com>
Most of the custom logic to handle special keying cases is now inside
the AnimationPlayerEditorPlugin.
The EditorInspector now emits a signal when inspecting a new object.
The second parameter of the signals `EditorInspector.property_keyed` and
`EditorProperty.property_keyed_with_value` can be NIL, causing the event
to fire with less arguments when using `emit_signal` that accepts
Variant arguments, so we use the pointer version instead.
Full inspector update was triggered only on property changed, but not on
undo/redo actions, which can cause inspector discrepancies when some
properties are supposed to be shown or hidden.
Now update all flag is passed into _edit_set() method which already has
logic to handle this case properly (it still triggers update_tree() down
the line).
Fixes#52336.
EditorProperty::unhandled_key_input was handling both press and release.
This means that if you press `ctrl+v` on an EditorProperty line input,
it will paste as expected on pressing `ctrl+v`, and accept the event so
EditorProperty will not see it. However, on release, LineEdit ignores
the event and EditorProperty still catches and handles it, using its own
paste implementation.
Resolves godotengine/godot-proposals#106.
Adds the following property menu options with default bindings:
- Copy Property (ctrl+c)
- Paste Property (ctrl+v)
- Copy Property Path (ctrl+shift+c)
If you hover over a property label in the inspector dock, you can copy
either the property value or the property path to the system clipboard
using the shortcuts above This is especially useful for the
`AnimationTree`, where code might reference properties like
"parameters/state/aim/move/blend_position".
One issue is that if you click a property, then click on the node you
currently have selected in the node tree, then press ctrl+shift+c, it
will still copy the selected property path rather than the node path. If
you click on a different node in the nodetree, however, ctrl+shift+c
will return to copying the nodepath.
The property value copy/paste was implemented by @KoBeWi at #39398 and
merged into this PR due to their similarity.
* `_gui_input`, `_input`, `_unhandled_input` and `_unhandled_key_input` are now regular C++ virutal functions.
* Everything else converted to GDVIRTUAL
* BIND_VMETHOD is gone, always use the new syntax from now on.
Creating `_gui_input` method and using the binder to register events will no longer work, simply override the virtual function now.
* New syntax is type safe.
* New syntax allows for type safe virtuals in native extensions.
* New syntax permits extremely fast calling.
Note: Everything was replaced where possible except for `_gui_input` `_input` and `_unhandled_input`.
These will require API rework on a separate PR as they work different than the rest of the functions.
Added a new method flag METHOD_FLAG_OBJECT_CORE, used internally. Allows to not dump the core virtuals like `_notification` to the json API, since each language will implement those as it is best fits.
Capsule height and radius setters can modify each other, rather than
using clamping, to avoid cases where values are not set correctly when
loading a scene (depending on the order of properties).
Inspector undo/redo:
Added the possibility to link properties together in the editor, so
they can be undone together, for cases where a property can modify
another one.
Gizmo undo/redo:
Capsule handles pass both radius and height values so they can be undone
together.
Found via `codespell -q 3 -S ./thirdparty,*.po,./DONORS.md -L ackward,ang,ans,ba,beng,cas,childs,childrens,dof,doubleclick,fave,findn,hist,inout,leapyear,lod,nd,numer,ois,ony,paket,seeked,sinc,switchs,te,uint`
* Added a new macro SNAME() that constructs and caches a local stringname.
* Subsequent usages use the cached version.
* Since these use a global static variable, a second refcounter of static usages need to be kept for cleanup time.
* Replaced all theme usages by this new macro.
* Replace all signal emission usages by this new macro.
* Replace all call_deferred usages by this new macro.
This is part of ongoing work to optimize GUI and the editor.
Implements https://github.com/godotengine/godot-proposals/issues/1835#issuecomment-727186192
* PauseMode is now ProcessMode, containing the following states:
```
PROCESS_MODE_INHERIT, // same as parent node
PROCESS_MODE_NORMAL, // process only if not paused
PROCESS_MODE_PAUSE_ONLY, // process only if paused
PROCESS_MODE_ALWAYS, // process always
PROCESS_MODE_DISABLED, // never process
```
* NOTIFICATION_PAUSED and NOTIFICATION_UNPAUSED are received effectively when the node is paused and unpaused (not any longer when pause mode is set in SceneTree).
* Renamed some nodes that used ProcessMode/process_mode to specify a callback type to ProcessCallback to avoid clashes.
-Advanced Settings toggle also hides advanced properties when disabled
-Simplified Advanced Bar (errors were just plain redundant)
-Reorganized rendering quality settings.
-Reorganized miscelaneous settings for clean up.
-For inspector refresh, the inspector now detects if a property change by polling a few times per second and then does update the control if so. This process is very cheap.
-For property list refresh, a new signal (property_list_changed) was added to Object. _change_notify() is replaced by notify_property_list_changed()
-Changed all objects using the old method to the signal, or just deleted the calls to _change_notify(<property>) since they are unnecesary now.
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
- Made shadow bias size independent, so it will remain when changing light or camera size.
- Implemented normal offset bias, which greatly enhances quality.
- Added transmission to subsurface scattering
- Reimplemented shadow filter modes
Closes#17260
- Parse `.po` files from `doc/translations/*.po` like already done
with `editor/translations/*.po`.
- Add logic to register a doc translation mapping in `TranslationServer`
and `EditorSettings`.
- Add `DTR()` to lookup the doc translation mapping (similar to `TTR()`).
Strings are automatically dedented and stripped of whitespace to ensure
that they would match the translation catalog.
- Use `DTR()` to translate relevant strings in `EditorHelp`,
`EditorInspector`, `CreateDialog`, `ConnectionsDialog`.
- Small simplification to `TranslationLoaderPO`, the path argument was
not really meaningful.
For us, it practically only changes the fact that `A<A<int>>` is now
used instead of the C++03 compatible `A<A<int> >`.
Note: clang-format 10+ changed the `Standard` arguments to fully
specified `c++11`, `c++14`, etc. versions, but we can't use `c++17`
now if we want to preserve compatibility with clang-format 8 and 9.
`Cpp11` is still supported as deprecated alias for `Latest`.
This was done by mistake in #36758, but it's not necessary and actual
causes a bug.
`property_changed` is only emitted via `emit_changed()`, which already
has default values for `p_field` and `p_changing`.
Also reverted to using `String` for now to be on the safe side, even if
it's inconsistent with `emit_changed()`. I had only changed it
partially in #36758 so it was inconsistent. It probably does make sense
to port `EditorInspector` and related property editors to use
`StringName` where relevant, but that's for a dedicated PR.
Fixes#36799.
- Fix `callable_mp` bindings to methods which used to have default
arguments passed to `bind_method`. We now have to re-specify them
manually when connecting.
- Re-add `GroupsEditor::update_tree` binding.
- Misc code quality changes along the way.
Remove now unnecessary bindings of signal callbacks in the public API.
There might be some false positives that need rebinding if they were
meant to be public.
No regular expressions were harmed in the making of this commit.
(Nah, just kidding.)
- Renames PackedIntArray to PackedInt32Array.
- Renames PackedFloatArray to PackedFloat32Array.
- Adds PackedInt64Array and PackedFloat64Array.
- Renames Variant::REAL to Variant::FLOAT for consistency.
Packed arrays are for storing large amount of data and creating stuff like
meshes, buffers. textures, etc. Forcing them to be 64 is a huge waste of
memory. That said, many users requested the ability to have 64 bits packed
arrays for their games, so this is just an optional added type.
For Variant, the float datatype is always 64 bits, and exposed as `float`.
We still have `real_t` which is the datatype that can change from 32 to 64
bits depending on a compile flag (not entirely working right now, but that's
the idea). It affects math related datatypes and code only.
Neither Variant nor PackedArray make use of real_t, which is only intended
for math precision, so the term is removed from there to keep only float.
-Texture renamed to Texture2D
-TextureLayered as base now inherits 2Darray, cubemap and cubemap array
-Removed all references to flags in textures (they will go in the shader)
-Texture3D gone for now (will come back later done properly)
-Create base rasterizer for RenderDevice, RasterizerRD
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
Settings search used to work only on properties, so if a searchbox text
was a substring of a category but not of a property the whole category
would be filtered out and no property would be shown.
Now the behaviour is changed so that when the searchbox text is a
substring of a category all its properties are shown too.
The previous behaviour is still present so that in case the searchbox
text is both a substring of a category and a property of another
category, all properties of the first category are shown and only the
property of the second category is shown.
The arrow is now displayed at the left to be consistent with
other places where folding is used. The arrow icons used are now
consistent with the rest of the editor. The `arrow_up` icon is
no longer used anywhere, so it was removed.
Additional spacing was also added for a better visual appearance.
This was a regression in 3.1 and later from the new inspector, where
PROPERTY_HINT_SPRITE_FRAME was not fully re-implemented. It's meant to
be a normal PROPERTY_HINT_RANGE which also automatically increments its
value when keyed in the animation player.
To avoid code duplication, I made the frames properties use the actual
PROPERTY_HINT_RANGE and introduced a PROPERTY_USAGE_KEYING_INCREMENTS
usage flag instead.
It appears that Object::script may be a valid ScriptInstance but not be
castable to Ref<Script>. There were only 5 places in the code that made
this assumption. This commit fixes that.
-Changed Animation to have a special signal when tracks are changed, to avoid unnecesary track cache rebuilds in AnimationPlayer
-Added missing emit_changed whe modifying keys to Animation
-Changed AnimationPlayer to use the new refcounted connections instead of the previous hacky way to keep references
-Changed AnimationEditor to update the current track when keys are edited
-Fixed bug where undo/redo did not work with AnimationKeyEdit (was not being updated)
-Made sure UndoRedo does not mind deleted objects in undo/redo history, this would corrupt the history or clear it without need.
