- Based on C++11's `atomic`
- Reworked `SafeRefCount` (based on the rewrite by @hpvb)
- Replaced free atomic functions by the new `SafeNumeric<T>`
- Replaced wrong cases of `volatile` by the new `SafeFlag`
- Platform-specific implementations no longer needed
Co-authored-by: Hein-Pieter van Braam-Stewart <hp@tmm.cx>
- Based on C++11's `thread` and `thread_local`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed (except for the few cases of non-portable functions)
- Simpler for `NO_THREADS`
- Thread ids are now the same across platforms (main is 1; others follow)
- Based on C++11's `mutex` and `condition_variable`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed
- Simpler for `NO_THREADS`
- Based on C++11's `mutex`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed
- Simpler for `NO_THREADS`
- `BinaryMutex` added for special cases as the non-recursive version
- `MutexLock` now takes a reference. At this point the cases of null `Mutex`es are rare. If you ever need that, just don't use `MutexLock`.
- `ScopedMutexLock` is dropped and replaced by `MutexLock`, because they were pretty much the same.
- Based on C++14's `shared_time_mutex`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed
- Simpler for `NO_THREADS`
This can be used to ensure a file has its contents saved
even if the project crashes or is killed by the user
(among other use cases).
See discussion in #29075.
(cherry picked from commit ab397460e9)
This can be used in server builds for journalctl compatibility.
(cherry picked from commit 341b9cf15a)
Fixes crash when exiting with --verbose with leaked resources
(cherry picked from commit 25c4dacb88)
When making items visible from the visual server, the collision check is deferred to prevent two identical collision checks when set_pairable is called shortly after.
It turns out that for some items (especially meshes), set_pairable is never called. This PR detects this occurrence and forces a collision check at the end of the routine.
The input to smoothstep is not actually a weight, and the decscription
of smoothstep was pretty hard to understand and easy to misinterpret.
Clarified what it means to be approximately equal.
nearest_po2 does not do what the descriptions says it does. For one,
it returns the same power if the input is a power of 2. Second, it
returns 0 if the input is negative or 0, while the smallest possible
integral power of 2 actually is 1 (2^0 = 1). Due to the implementation
and how it is used in a lot of places, it does not seem wise to change
such a core function however, and I decided it is better to alter the
description of the built-in.
Added a few examples/clarifications/edge-cases.
(cherry picked from commit 7f9bfee0ac)
Channels that are inactive -or when playback has not started yet- will report -200 dB as their peak value (which is also the lowest value possible during playback).
(cherry picked from commit a2b3a73e2d)
A major feature lacking in the octree was proper support for setting visibility / activation. This meant that invisible objects were still causing lots of processing in the tree unnecessarily.
This PR adds proper support for activation, items are temporarily removed from the tree and collision detection when inactive.
Fix bug whereby AABBs were reused from previous items due to use of a pool, resulting in missed collisions.
Also use full mask collision checks for all cases except generic update.
In the octree collisions are flushed as objects are moved, whereas in the BVH they are usually flushed once per frame.
This was causing problems in the render tree in some rare situations where objects were being created (perhaps deleted and recreated using the same handle in the same frame). This PR flushes the collisions before creating objects, and set_pairable.
set_pairable may not be necessary but it is done for safety until proven not necessary.
Also a small potential for a bug is closed in remove_unordered use.
This can be used to print thread IDs in logs. This can make it easier
to debug multi-threaded applications.
Co-authored-by: Khaos <khaos@khaos-coders.org>
(cherry picked from commit 35b046ddf7)
Change render BVH update scheme from once per update_dirty_instances to a new update_scenarios function called once per draw.
Fix lights not being properly unpaired.
Fixed bug in add_changed_item where AABBs were not being updated due to more than one update per tick.
Calling set_pairable now will update collisions (rather than waiting for the next item_move).
Mask behaviour used for pairing now (hopefully) matches octree.
Completely re-write the lightmap generation code:
- Follow the general lightmapper code structure from 4.0.
- Use proper path tracing to compute the global illumination.
- Use atlassing to merge all lightmaps into a single texture (done by @RandomShaper)
- Use OpenImageDenoiser to improve the generated lightmaps.
- Take into account alpha transparency in material textures.
- Allow baking environment lighting.
- Add bicubic lightmap filtering.
There is some minor compatibility breakage in some properties and methods
in BakedLightmap, but lightmaps generated in previous engine versions
should work fine out of the box.
The scene importer has been changed to generate `.unwrap_cache` files
next to the imported scene files. These files *SHOULD* be added to any
version control system as they guarantee there won't be differences when
re-importing the scene from other OSes or engine versions.
This work started as a Google Summer of Code project; Was later funded by IMVU for a good amount of progress;
Was then finished and polished by me on my free time.
Co-authored-by: Pedro J. Estébanez <pedrojrulez@gmail.com>
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
(cherry picked from commit b5334d14f7)
Complete rewrite of spatial partitioning using a bounding volume hierarchy rather than octree.
Switchable in project settings between using octree or BVH for rendering and physics.
3.2 version of b5107715f1.
`get_seed()` still returns the previous state and not the initial seed,
because users may rely on this behavior for resetting the state in 3.2.
Documented this is going to be fixed in 4.0.
Co-authored-by: MidZik <matt.idzik1@gmail.com>
Checks whether the signal exists when issuing an error message when
disconnecting a nonexistent connection. Also prints the callable name.
(cherry picked from commit 6c026a6814)
Alternative to `_change_notify()` to be called from within C++ classes.
Achieves low-level consistency with scripting, where this method is
exposed for updating the editor (inspector) with new values.
(cherry picked from commit 9aa06c3e65)
Partially revert change allowing sprite get_rect snapping to be controlled by `pixel_snap` again rather than `transform_snap` (to prevent breaking compatibility). Adds a final `use_camera_snap` project setting to allow snapping viewports as in reduz original PR.
Image::resize_to_po2() now takes an optional p_interpolation parameter
that it passes directly to resize() with default value INTERPOLATE_BILINEAR.
GLES2: call resize_to_po2() with interpolate argument
Call resize_to_po2() in GLES2 rasterizer storage with either
INTERPOLATE_BILINEAR or INTERPOLATE_NEAREST depending on TEXTURE_FLAG_FILTER.
This avoids filtering issues with non power of two pixel art textures.
See #44379
- Avoid spaces in Mono log file names.
- Use a `.log` extension for Mono logs, just like non-Mono logs.
- Use periods to separate hours/minutes/seconds for non-Mono logs.
(cherry picked from commit 4d81776fc9)
It allows binding multiple sockets to the same ADDR:PORT (unlike TCP,
which still requires different ADDR:PORT combinations).
(cherry picked from commit 4b6a35c74a)
It's non-deterministic so it's better to show a fixed value like 0 instead of
having it potentially change whenever `randomize()` is called.
Fixes#43317.
(cherry picked from commit 35e6070a35)
This improves download speeds at the cost of increased memory usage.
This change also effects HTTPRequest automatically.
See #32807 and #33862.
(cherry picked from commit 13357095ee)
This patch fixes two related issues. One is the race condition in issue #42107..
The other is a crash which happens when the reader is lapped near the end of the buffer.
Backport of 48e8da4 to 3.2
Fix errors when comparing strings with large numbers (> INT64_MAX).
Comparisons now occur by comparing individual digits, instead of
converting to int64_t first.
(cherry picked from commit de46c92711)
1024 KB was low enough that many users seem to hit it, which can lead to the
editor freezing.
The proper fixed as described in #35653 would be to implement a page allocator
to prevent this overflow, but as a stop-gap measure, we can increase the
default value to a more lenient 4096 KB which should be high enough for the
vast majority of use cases.
The default size can be brought down again if/when #35653 is properly fixed,
and if it's actually relevant from a memory point of view.
(cherry picked from commit 5009ba54b2)
- immediately return if A == B;
- first and last elements (front, back) are updated upon relinking;
- handles a special case of forward and backward adjacent elements.
(cherry picked from commit ac69f092fc)
Add __NetBSD__ to `platform_config.h` so that it can find `alloca`
and use the proper `pthread_setname_np` format.
Rename RANDOM_MAX to avoid conflict with NetBSD stdlib.
Fixes#42145.
(cherry picked from commit 5f4d64f4f3)
And revert follow-up regression fix "Remap script path when registering class."
After the regression fix, the original issue is valid again so it's better
to go back to the previous state.
This reverts commits e264ae20d2 and
fceb64827e.
(cherry picked from commit f13207254c)
Prevents adding new octants until a limiting number of elements have been added to the current octant. This enables balancing the benefits of brute force against the benefits of spatial partitioning. The limit can be set per octree.
Project settings are added for rendering octree to set the best balance per project depending on number of tests per frame / tick, and the amount of editing of the octree.
Fixes octants being leaked when removing elements.
Optimize octree with cached linear lists
Storing elements in octants using linked lists is efficient for housekeeping but very slow for testing. This optimization stores additional local_vectors with Element pointers and AABBs which are cached and only updated when a dirty flag is set on the octant.
This is selectable with 2 versions of Octree : Octree and Octree_CL, Octree being the old behaviour. At present the cached list version is only used for the visual server octree (rendering) as it has only been demonstrated to be faster there so far.
This uses slightly more memory (probably a few kb in most cases) but can be significantly faster during testing (culling etc).
Co-authored-by: Sergey Minakov <naithar@icloud.com>
New contributors added to AUTHORS:
@hinlopen, @naithar, @rrcore, @SkyLucilfer, @TwistedTwigleg
Thanks to all contributors and donors for making Godot possible!
---
Also changes to relevant code that parses the DONORS.md to match
the new tiers.
(cherry picked from commit d2d4c1c957)
Was causing `class_name`-defined scripts to not being loaded in exported
games due to the remap from `*.gd` to `*.gdc`/`*.gde`.
(cherry picked from commit fceb64827e)
- Enhance directory API
- Fix `FileAccess::exists()` not checking for PackedData being disabled
- Fix moving to the parent directory (`..`)
- Allow absolute paths in existence checks
Depending on the device implementation, editor actions could be
received with different action ids or not at all for multi-line.
Added a parameter to virtual keyboards to properly handle single-line
and multi-line cases in all situations.
Single-line:
Input type set to text without multiline to make sure actions are sent.
IME options are set to DONE action to force action id consistency.
Multi-line:
Input type set to text and multiline to make sure enter triggers new lines.
Actions are disabled by the multiline flag, so '\n' characters are
handled in text changed callbacks.
UDPServer now uses a single socket which is shared with the
PacketPeerUDP it creates and has a new `poll` function to read incoming
packets on that socket and delivers them to the appropriate peer.
PacketPeerUDP created this way never reads from the socket, but are
allowed to write on it using sendto.
This is needed because Windows (unlike Linux/BSD) does not support
packet routing when multiple sockets are bound on the same address/port.
(cherry picked from commit 147bbe2155)
- Use the `.log` file extension (recognized on Windows out of the box)
to better hint that generated files are logs. Some editors provide
dedicated syntax highlighting for those files.
- Use an underscore to separate the basename from the date and
the date from the time in log filenames. This makes the filename
easier to read.
- Keep only 5 log files by default to decrease disk usage in case
messages are spammed.
(cherry picked from commit 20af28ec06)
Current error checks for to_int and to_int64 do not issue overflow error
messages for INT64_MAX + 1, INT64_MAX + 2, and others close to the
limits. Likewise, error checks for hex_to_int, hex_to_int64 and bin_to_int64
issue false positive error messages for INT64_MIN or INT32_MIN. This commit
fixes these error checks.
Fix calculation for negative times to ensure Sundays are wrapped around to '0'
instead of '7', making it consistent with the output for positive times.
(cherry picked from commit aae5f246ff)
This reverts commit 7f61710183.
See #38868, in its current implementation a small skew value might end up
serialized to scene files due to floating point precision errors, which is
detrimental to VCS.
This can be cherry-picked anew once a fix for #38868 has been found.
- Fixed floating point issue on the old one.
- Fixed the equation on the get_euler_yxz function.
- Added unit tests.
This work has been kindly sponsored by IMVU.
(cherry picked from commit 2331300989)
Godot currently supports zero padding for integers, octals and
hexadecimals when using format strings, but not for floats.
This commit adds support for zero padding for floats, thus ensuring
consistent behavior for all types, and making Godot's format specifiers'
behavior closer to c's `printf()`.
Before: `print("<%07.2f>" % -0.2345)` prints `< -0.23>`.
Now: `print("<%07.2f>" % -0.2345)` prints `<-000.23>`.
`print("<%7.2f>" % -0.2345)` prints `< -0.23>`.
(cherry picked from commit b7d835d9ca)
Note:
Casting to the C++ classes and calling the methods there would work as well,
but would require including he header files for the specific object types handled
here, which wouldn't be OK either.
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
(cherry picked from commit cd4e46ee65)
Each time `r_err_str` is set, we should return a parse error.
Removed redundant `return OK;` which were already handled after the big
`if`/`else if`/`else` for `TK_IDENTIFIER`.
Part of #17372.
(cherry picked from commit e7ebda975a)
Affects per-pixel transparency
The current method renders to the screen by copying the GLES output to a
DIB for transparency using the CPU instead of rendering directly to the
window via the GPU. This is slower and also forces the window to be borderless
as WS_EX_LAYERED affects the non-client region as well.
This change uses DWMEnableBlurBehindWindow which allows using the standard
glClearColor() background alpha and is also performed through the GPU,
eliminating CPU bottlenecks
Now the stack saved in a `GDScriptFunctionState` is cleared as soon as the `yield()` operation is known not to be resumed because either the script, the instance or both are deleted.
This clears problems like leaked objects by eliminating cases of circular references between `GDScriptFunctionState`s preventing them and the objects they refer to in their saved stacks from being released. As an example, this makes using `SceneTreeTimer` safer.
Furthermore, with this change it's now possible to print early warnings about `yield()`s to released script/instances, as now we know they won't be successfully resumed as the condition for that happens. However, this PR doesn't add such messages, to keep the observed behavior the same for the time being.
Also, now a backup of the function name in `GDScriptFunctionState` is used, since the script may not be valid by the time the function name is needed for the resume-after-yield error messages.
Skew is x-axis only, because it must be bidirectionally convertible to a 2x3 matrix, but you can subtract it to the rotation to get the effect on y-axis
(cherry picked from commit efb1f7d76b)
`OS.shell_open()` will pass on the path directly to the OS' shell
handler (which can handle file paths or URLs). It can't handle
Godot-specific paths, so these need to be converted with
`ProjectSettings.globalize_path()` first.
(cherry picked from commit d46e411b44)
This fixes numerous false positives coming out of the culling system.
AABB checks are now a full separating-axis check against the frustum, with the points of the frustum being compared to the planes of the box just as the points of the box were being compared to the planes of the frustum. This fixes large objects behind the camera not being culled correctly.
Some systems that used frustums that were (sometimes mistakenly?) unbounded on one or more side have been modified to be fully enclosed.
This moves the instance id member from Variant to the ObjectRC so that Variant is still the same size as before the fix (and also regardless if debug or release build).
This commit addresses multiple issues with `Variant`s that point to an `Object`
which is later released, when it's tried to be accessed again.
Formerly, **while running on the debugger the system would check if the instance id was
still valid** to print warnings or return special values. Some cases weren't being
warned about whatsoever.
Also, a newly allocated `Object` could happen to be allocated at the same memory
address of an old one, making cases of use hard to find and having **`Variant`s pointing
to the old one magically reassigned to the new**.
This commit makes the engine realize all these situations **under debugging**
so you can detect and fix them. Running without a debugger attached will still
behave as it always did.
Also the warning messages have been extended and made clearer.
All that said, in the name of performance there's still one possible case of undefined
behavior: in multithreaded scripts there would be a race condition between a thread freeing
an `Object` and another one trying to operate on it. The latter may not realize the
`Object` has been freed soon enough. But that's a case of bad scripting that was never
supported anyway.
The `TextEdit` one was indeed a potential bug.
The `PCKPacker` one seems to be a false positive, it's already in a
`for` loop that depends on `files.size()`.
(cherry picked from commit ca4e4506db)
The minimum slider value no longer allows decreasing the value below
the default, as this can cause things to break in the editor.
The maximum slider value was also increased to 4096 since it can safely
be increased to that value (some add-ons may require it).
This closes#37052.
(cherry picked from commit 8d8c7a9383)
Namely, move the drive dropdown to just the left of the path text box and don't include the former
in the latter.
This improves the UX on Windows.
In the UNIX case, since its concept of drives is (ab)used to provide shortcuts to useful paths, its
dropdown is kept at the original location.
