Updating continuously should only be enabled for troubleshooting
purposes, as it uses a lot of CPU/GPU power.
The update spinner is now displayed in red when the Update Continuously
editor setting is enabled.
Implemented "output" event
Refactored "seq" field generation
Prevent debugging when editor and client are in different projects
Removed unneeded references to peer on the parser
Refactored way to detect project path
Implemented "setBreakpoints" request
Fix double events when terminating from client
Refactored "stopped" event
Implemented "stopped" with breakpoint event
Implemented "stackTrace", "scopes" and "variables" request
Report incoming number of stack dump variables
Implemented proper reporting of scopes and variables from stack frames
Prevent editor from grabbing focus when a DAP session is active
Implemented "next" and "stepIn" requests
Implemented "Source" checksum computing
Switched expected errors from macros to silent guards
Refactored message_id
Respect client settings regarding lines/columns behavior
Refactored nested DAP fields
Implement reporting of "Members" and "Globals" scopes as well
Fix error messages not being shown, and improved wrong path message
Found via `codespell -q 3 -S ./thirdparty,*.po,./DONORS.md -L ackward,ang,ans,ba,beng,cas,childs,childrens,dof,doubleclick,fave,findn,hist,inout,leapyear,lod,nd,numer,ois,ony,paket,seeked,sinc,switchs,te,uint`
* Shadow quality settings now specialization constant.
* Decal and light projector filters can be set.
* Changing those settings forces re-creation of the pipelines.
These changes should help improve performance related to shadow mapping, and allows improving performance by sacrificing decal and light projector quality.
* Added a new macro SNAME() that constructs and caches a local stringname.
* Subsequent usages use the cached version.
* Since these use a global static variable, a second refcounter of static usages need to be kept for cleanup time.
* Replaced all theme usages by this new macro.
* Replace all signal emission usages by this new macro.
* Replace all call_deferred usages by this new macro.
This is part of ongoing work to optimize GUI and the editor.
* If not present, the dialog asks to load build sources from a file.
* The export templates check now also verifies that build sources are installed and skips the template check.
This makes Android development easier.
* This PR adds the ability to disable classes when building.
* For now it's only possible to do this via command like:
`scons disable_classes=RayCast2D,Area3D`
* Eventually, a proper UI will be implemented to create a build config file to do this at large scale, as well as detect what is used in the project.
* Editor 2D viewport now uses embedded subwindows (windows no longer pop up)
* Restored the ability to disable 3D on the 2D viewport (makes 3D not display on 2D when there is a camera on the scene)
* Deprecates GDNative in favor of a simpler, lower level interface.
* New extension system allows registering core engine classes.
* Simple header interface in gdnative_interace.h
- EditorSettings: Ensure that `create()` makes a valid singleton.
Fixes#49179, fixes#49450.
- EditorPaths: Cleanup code, properly set `paths_valid`.
- EditorPaths: Move more paths validation (check, mkdir) from
EditorSettings for a better separation of concerns.
- EditorPaths: Move EditorFileSystem creation of `.godot/imported`
next to other paths.
This PR and commit adds a new IK system for 2D with the Skeleton2D node
that adds several new IK solvers, a way to control bones in a Skeleton2D
node similar to that in Skeleton3D. It also adds additional changes
and functionality.
This work was sponsored by GSoC 2020 and TwistedTwigleg.
Full list of changes:
* Adds a SkeletonModifier2D resource
* This resource is the base where all IK code is written and executed
* Has a function for clamping angles, since it is so commonly used
* Modifiers are unique when duplicated so it works with instancing
* Adds a SkeletonModifierStack2D resource
* This resource manages a series of SkeletonModification2Ds
* This is what the Skeleton2D directly interfaces with to make IK possible
* Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK
* Each modification is in its own file
* There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together
* Adds a PhysicalBone2D node
* Works similar to the PhysicalBone3D node, but uses a RigidBody2D node
* Changes to Skeleton2D listed below:
* Skeleton2D now holds a single SkeletonModificationStack2D for IK
* Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D
* Changes to Bone2D listed below:
* The default_length property has been changed to length. Length is the length of the bone to its child bone node
* New bone_angle property, which is the angle the bone has to its first child bone node
* Bone2D caches its transform when not modified by IK for IK interpolation purposes
* Bone2D draws its own editor gizmo, though this is stated to change in the future
* Changes to CanvasItemEditor listed below:
* Bone2D gizmo drawing code removed
* The 2D IK code is removed. Now Bone2D is the only bone system for 2D
* Transform2D now has a looking_at function for rotating to face a position
* Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE
* These notifications only are called in the editor right before and after saving a scene
* Needed for not saving the IK position when executing IK in the editor
* Documentation for all the changes listed above.
* GIProbe is now VoxelGI
* BakedLightmap is now LightmapGI
As godot adds more ways to provide GI (as an example, SDFGI in 4.0), the different techniques (which have different pros/cons) need to be properly named to avoid confusion.
* Shader compilation is now cached. Subsequent loads take less than a millisecond.
* Improved game, editor and project manager startup time.
* Editor uses .godot/shader_cache to store shaders.
* Game uses user://shader_cache
* Project manager uses $config_dir/shader_cache
* Options to tweak shader caching in project settings.
* Editor path configuration moved from EditorSettings to new class, EditorPaths, so it can be available early on (before shaders are compiled).
* Reworked ShaderCompilerRD to ensure deterministic shader code creation (else shader may change and cache will be invalidated).
* Added shader compression with SMOLV: https://github.com/aras-p/smol-v
- Move most properties from TileMap to TileSet,
- Make TileSet more flexible, supporting more feature (several
collision layers, etc...),
- Fusion both the TileMap and TileSet editor,
- Implement TileSetSources, and thus a new way to index tiles in the TileSet,
- Rework the TileSet and TileMap editors completely,
- Implement an editor zoom widget (and use it in several places)
This can be used to tell Godot to run an executable that will run Godot
rather than running Godot directly. This is useful to make Godot start
on the dedicated GPU when using a NVIDIA Optimus setup on Linux:
`prime-run %command%`
The `editor/run/main_run_args` setting declaration was moved to make it
visible in the ProjectSettings documentation.
The editor theme now makes use of rounded corners and less borders
to follow modern visual trends.
The default theme's colors were also tweaked to make the blue hue
more subtle (similar to the Arc theme, which was removed as a
consequence). The Alien theme was replaced by a Breeze Dark theme,
which should blend in well with the KDE theme.
Added an occlusion culling system with support for static occluder meshes.
It can be enabled via `Project Settings > Rendering > Occlusion Culling > Use Occlusion Culling`.
Occluders are defined via the new `Occluder3D` resource and instanced using the new
`OccluderInstance3D` node. The occluders can also be automatically baked from a
scene using the built-in editor plugin.
- Display the scene name, then the project name, then "Godot Engine".
- Display the "modified" mark before anytihng else.
Both of these changes ensure important, project-specific elements
can always be seen in the task bar which may truncate strings due to
its low per-item width.
- Use "Unnamed Project" if the project has no name (similar to the
Project Manager).
- Display a specific error message if the project doesn't have an
`export_presets.cfg` file.
- Display a list of detected export presets if an invalid export
preset name is supplied.
Its only purpose was to prevent importing CSV files as translations, but it
would still import them as *nothing*, leading to workflow issues.
This is now properly fixed with #47268 which allows disabling the import for
specific files.
* Added option for importers to show an Advanced settings dialog
* Created advanced settings dialog for Scene Importer
* Cleaned up importers (remove many old/unused options)
* Added the ability to customize every node, material, mesh and animation individually
* Saving to animations and meshes to files is now a manual process, making it more predictable
* Added the ability for materials to be replaced by external files (or to be made external, up to you).
* When doubleclicking an impoted scene in the filesystem dock, it automatically shows the import settings instead of asking to open it.
WARNING: Lightmap UV unwrap is not working, it needs to be re-made.
- Based on C++11's `atomic`
- Reworked `SafeRefCount` (based on the rewrite by @hpvb)
- Replaced free atomic functions by the new `SafeNumeric<T>`
- Replaced wrong cases of `volatile bool` by the new `SafeFlag`
- Platform-specific implementations no longer needed
Co-authored-by: Hein-Pieter van Braam-Stewart <hp@tmm.cx>
This removes hardcoded actions from things like LineEdit and TextEdit.
Previously, things like copy, paste, etc were all hardcoded to Ctrl+C, Ctrl+V, etc. They could not be changed. This allows the possibility of them being changed, by making them use the action map. This has the added benefit of greatly simplifying the input handling logic in those controls. The logic which was previously in a huge and hard to follow switch statement has been extracted to individual methods.
-Advanced Settings toggle also hides advanced properties when disabled
-Simplified Advanced Bar (errors were just plain redundant)
-Reorganized rendering quality settings.
-Reorganized miscelaneous settings for clean up.
-Only update rendering settings when project settings change
-Fixes the update spinner (and editor rendering) updating all the time.
-Added a "project_settings_changed" signal to EditorNode and EditorPlugin
-Added a new method in Resource: reset_state , used for reloading the same resource from disk
-Added a new cache mode "replace" in ResourceLoader, which reuses existing loaded sub-resources but resets their data from disk (or replaces them if they chaged type)
-Because the correct sub-resource paths are always loaded now, this fixes bugs with subresource folding or subresource ordering when saving.
-For inspector refresh, the inspector now detects if a property change by polling a few times per second and then does update the control if so. This process is very cheap.
-For property list refresh, a new signal (property_list_changed) was added to Object. _change_notify() is replaced by notify_property_list_changed()
-Changed all objects using the old method to the signal, or just deleted the calls to _change_notify(<property>) since they are unnecesary now.
-Always use temporal reproject, it just loos way better than any other filter.
-By always using termporal reproject, the shadowmap reduction can be done away with, massively improving performance.
-Disadvantage of temporal reproject is update latency so..
-Made sure a gaussian filter runs in XY after fog, this allows to keep stability and lower latency.
- Based on C++11's `thread` and `thread_local`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed (except for the few cases of non-portable functions)
- Simpler for `NO_THREADS`
- Thread ids are now the same across platforms (main is 1; others follow)
-All shadow rendering is done with raster now (no compute)
-All shadow rendering is done by rendering directly to the shadow atlas
-Improved how buffer clearing is done to optimize the above.
-Ability to set shadows as 16 bits.
-SDFGI direct light is done over many frames
-SDFGI Changed settings for rays/frame
-SDFGI Misc optimizations
-SDFGI Bug fix on probe scroll
-GIProbe was not working, got it to work again
-GIProbe dynamic objects were not working, fixed
-Added a half size GI option.
1. show valid directory path when opening editor file dialog
2. keep file name when changing path by entering path
3. add first extension in filter automatically if not given
4. remove directory in recent list if it's not valid anymore
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
* Support KHR_texture_transform.
* Support exporting glTF2
* Support exporting instanced scenes
* Extract into a gltf state and gltf document
* Add a tools menu for exporting gltf2
As a bonus, to have consistency between use Beziers and create insert tracks, use Beziers also gets a default via editor settings that is used when the confirmation dialog is disabled, instead of just falling back to creating non-Bezier tracks.
-Happens on import by default for all models
-Just works (tm)
-Biasing can be later adjusted per node or per viewport (as well as globally)
-Disabled AABB.get_support test because its broken
-Reworked how meshes are treated by importer by using EditorSceneImporterMesh and EditorSceneImporterMeshNode. Instead of Mesh and MeshInstance, this allows more efficient processing of meshes before they are actually registered in the RenderingServer.
-Integrated MeshOptimizer
-Reworked internals of SurfaceTool to use arrays, making it more performant and easy to run optimizatons on.
The code we had for PVRTexTool doesn't work as it's not compatible with current
PVRTexTool CLI options, and likely hasn't been for years.
Instead, we have our own vendored pvrtccompressor thirdparty library which all
users have thus de-facto been using. This commit moves the compress code to
`modules/pvr` where it belongs.
There's no proper compress function for PVRTC 2-bit format, that's a bug that
will need to be fixed (currently it's compressed as 4-bit format even if you
use Image::FORMAT_PVRTC2).
Fixes#28669.
Export presets contains the export_path option, to specify the default
export location, but the CLI export option disregarded that, and always
required and export path to be specified.
After this commit, if the export path is not specified in the command,
the one in the preset will be used, erroring only if it's not present or
invalid.
This also makes borders always display in the editor theme,
even if the editor scale is below 100%. Otherwise, "focus" outlines
would vanish when using an editor scale below 100%,
which harms usability.
-Removed normal/specular properties from nodes
-Create CanvasTexture, which can contain normal/specular channels
-Refactored, optimized and simplified 2D shaders
-Use atlas for light textures.
-Use a shadow atlas for shadow textures.
-Use both items aboves to make light rendering stateless (faster).
-Reorganized uniform sets for more efficiency.
The editor used to only copy drag-dropped files in the File System pane
if the given file was a valid resource, or had a specific file format
(ttf, otf).
With this PR, all drag and dropped files are copied instead, no matter
their extension.
Changes:
* EngineDebugger is exposed to gdscript. Game side of communication can be implemented through it.
* EditorDebuggerPlugin is added which handles the editor side of communication.
- Extacted all syntax highlighting code from text edit
- Removed enable syntax highlighting from text edit
- Added line_edited_from signal to text_edit
- Renamed get/set_syntax_highlighting to get/set_syntax_highlighter
- Added EditorSyntaxHighligher
- Makes all boolean setters/getters consistent.
- Fixes bug where `glow_hdr_bleed_scale` was not used.
- Split CameraEffects to their own source file.
- Reorder all Environment method and properties declarations,
definitions and bindings to be consistent with each other
and with the order of property bindings.
- Bind missing enum values added with SDFGI.
- Remove unused SDFGI enhance_ssr boolean.
- Sync doc changes after SDFGI merge and other misc changes.
A static function is added to EditorNode which allows for filename
disambiguation given a list of filenames and the corresponding list of
absolute paths for those files. This function is then used to
disambiguate scene and script tabs in the editor.
The existing theme editor icon could be unintentionally set for any
global class with matching name (`Group` icon, `Group` class_name etc),
which would only show up in the "Create Dialog" context, but not the
scene tree dock.
This change prevents this behavior, and ensures that the icon can be
actually overidden by explicit icon path in `class_name`, if there's any
custom icon to begin with.
The correct built-in type's icon is fetched for child classes if there
are no custom icons detected throughout base classes as well, so it
isn't left empty for those cases.
`get_global_class_name` for `GDScriptLanguage` is slow because
it forces to parse an entire script each time. This patch ensures
that the icon is actually fetched from the EditorData where they
are loaded beforehand.
This change also makes the behavior consistent with the existing
`get_object_icon` method in EditorNode.
ToolButton has no redeeming differences with Button;
it's just a Button with the Flat property enabled by default.
Removing it avoids some confusion when creating GUIs.
Existing ToolButtons will be converted to Buttons, but the Flat
property won't be enabled automatically.
This closes https://github.com/godotengine/godot-proposals/issues/1081.
The crash happens further down when setting an invalid owner in
`Node::_set_owner_nocheck` but I couldn't figure out how to fix it.
But here the proper fix is to catch the invalid scene file early on
and fail loading it.
Part of #17372.
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
Using `clang-tidy`'s `modernize-use-default-member-init` check and
manual review of the changes, and some extra manual changes that
`clang-tidy` failed to do.
Also went manually through all of `core` to find occurrences that
`clang-tidy` couldn't handle, especially all initializations done
in a constructor without using initializer lists.
This option can be used to workaround various issues with stuff
not reloading properly when changes are made.
The option was renamed to clarify the fact that it actually
reloads the scene saved on the filesystem.
