* Replace case-by-case extraction with PNAME & GNAME
* Fix group handling when group hint begins with property name
* Exclude properties that are PROPERTY_USAGE_NO_EDITOR
* Extract missing ADD_ARRAY*, ADD_SUBGROUP* macros
Temporarily removes agent from navigation map when parent node cannot process due to SceneTree pause and process_mode property. Normal process_mode does not work as other agents would still avoid the paused agents because they were still active on the navigation map and the rvo world. Also fixes potential crash when region_get_map or agent_get_map is called while no map is set.
While default ReCast library has support for 0.0 'sample_distance' the Godot implementation does not an crashes.
Previously Godot would set all sample_distance values below 0.9 to 0 which causes the crashes.
This limits the sample_distance range selection to 0.1 - 16.0 and also clamps sample_distance that are below 0.1 before ReCast receives them.
* Map is unnecessary and inefficient in almost every case.
* Replaced by the new HashMap.
* Renamed Map to RBMap and Set to RBSet for cases that still make sense
(order matters) but use is discouraged.
There were very few cases where replacing by HashMap was undesired because
keeping the key order was intended.
I tried to keep those (as RBMap) as much as possible, but might have missed
some. Review appreciated!
The stack now contains three special addresses that should no be copied
to the state, since it contains references that creates cycles. They can
be recreated when the function is resumed.
This commit also removes the clearing of stack from the
GDScriptFunctionState destructor, since it should be cleared when the
function exits. The state stack should only be cleared manually if the
instance is freed before the state resumes (which is already being
done). Otherwise this would destruct the stack twice, causing crashes.
Utility functions for NavigationServer2D/3D to find missing RID information when working with Server API directly. e.g. from map to regions and agents, from agent or region to map, from region to map and agents and so on ....
Requirement to work with NavigationServer API exklusive without SceneTree nodes and when juggling agents and regions between multiple navigation maps.
Adds a new, cleaned up, HashMap implementation.
* Uses Robin Hood Hashing (https://en.wikipedia.org/wiki/Hash_table#Robin_Hood_hashing).
* Keeps elements in a double linked list for simpler, ordered, iteration.
* Allows keeping iterators for later use in removal (Unlike Map<>, it does not do much
for performance vs keeping the key, but helps replace old code).
* Uses a more modern C++ iterator API, deprecates the old one.
* Supports custom allocator (in case there is a wish to use a paged one).
This class aims to unify all the associative template usage and replace it by this one:
* Map<> (whereas key order does not matter, which is 99% of cases)
* HashMap<>
* OrderedHashMap<>
* OAHashMap<>
Adds Warning when users try to bake a NavigationMesh with suspiciously big source geometry and small cellsizes as this baking process will likely fail or result in a NavigationMesh that will create serious pathfinding performance issues.
Note, this keeps the old behaviour of reporting CONNECTION_CONNECTED
while disconnecting.
We should change this before 4.0, but needs further refactoring of the
WebSocket classes.
* Changed to use the same stages as extensions.
* Makes the initialization more coherent, helping solve problems due to lack of stages.
* Makes it easier to port between module and extension.
* removed the DRIVER initialization level (no longer needed).
Previously, there was an issue where the gdscript analyzer incorrectly
riased a validation error for code that had a default Dictionary, Array,
or custom type.
These typedefs don't save much typing compared to the full `Ref<Resource>`
and `Ref<RefCounted>`, yet they sometimes introduce confusion among
new contributors.
Didn't commit all the changes where it wants to initialize a struct
with `{}`. Should be reviewed in a separate PR.
Option `IgnoreArrays` enabled for now to be conservative, can be
disabled to see if it proposes more useful changes.
Also fixed manually a handful of other missing initializations / moved
some from constructors.
Rewrites the definition of how the function works.
Reworks the style of the examples and adds a negative range example.
Changes the while loop to a range loop in the array backwards example.
Convert method signature parameters to const where it is possible
# Conflicts:
# drivers/gles3/rasterizer_canvas_gles3.cpp
# drivers/gles3/rasterizer_canvas_gles3.h
# editor/plugins/animation_state_machine_editor.cpp
# editor/plugins/animation_state_machine_editor.h
Add "generate_mipmap" font import option.
Add some missing features to the Sprite3D.
Move BiDi override code from Control to TextServer.
Add functions to access TextServer font cache textures.
Add MSDF related flags and shader to the standard material.
Change standard material cache to use HashMap instead of Vector.
Constructors are more accessible.
Basic type methods are now based on ClassDB and not registerd_node_names.
Selecting search_classes now automatically changes the scope.
Added the ability to import scenes as AnimationLibrary
* Completes implementation of https://github.com/godotengine/godot-proposals/issues/4296
* Helps if you want to export animations to a separate file (say a GLTF) to avoid re-importing/exporting them every time the model changes.
* Helps if you simply want to have animations using a dummy model, which can be shared across multiple models.
Creates a secondary scene importer used only for animations.
**NOTE**: A new flag for scene importer: EditorSceneFormatImporter.IMPORT_DISCARD_MESHES_AND_MATERIALS has been added, to hint importers that they should skip meshes and animations (and hence make importing faster). It is not implemented in any importer yet, this should be done in a separate PR.
* Instead of containing single animations, AnimationPlayer now contains libraries.
* Libraries, in turn, contain the animations.
This paves the way for implementing the possibility of importing scenes as animation libraries, finally allowing to import animations separate from the 3D models.
Missing (will be done on separate PRs):
* Make it possible to import scenes (dae/fbx/gltf) as animation libraries.
* Make it possible for AnimationTree to import animation libraries on its own, so it does not rely on AnimationPlayer for everything.
- improved mesh data calculation from standalone static colliders so that no
VisualServer calls are performed - and thus no VS mutexes need to
be locked in case of on-thread baking
- improved the same for GridMap's static colliders
Autoloaded scripts should always inherit from Node. When you run a
project that tries to autoload a script which doesn’t inherit from Node,
then Godot gives an error.
Before this change, the error said “Script does not inherit a Node”.
That error message is a little bit misleading. If a class inherits a
Node, then one of its superclasses has a Node. If a class inherits
_from_ Node, then one of its superclasses is Node. This change corrects
that mistake.
Fixes#59884.
This PR is a continuation to #54886
* Changed Blender path editor setting from binary to installation.
* Add a class to query whether the format is supported.
* This class allows to create proper editors to configure support.
**NOTE**: This PR only provides autodetection on Linux. Code needs to be added for Windows and MacOS to autodetect the Blender installation.
Co-authored-by: bruvzg <7645683+bruvzg@users.noreply.github.com>
Co-authored-by: Pedro J. Estébanez <pedrojrulez@gmail.com>
Lets you drag or place .fbx files in the project folder and it will import the files.
An editor setting sets the location of the fbx2gltf binary.
Enables .fbx and .blend by default.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
This importer was the fruit of a lot of amazing reverse engineering
work by RevoluPowered, based on the original Assimp importer that was
introduced by fire.
While promising and well tuned for a specific type of FBX scenes, it
was found to have many flaws to support the many FBX exporters and
legacy models that Godot users want to use. As we currently lack a
maintainer to improve it, those issues are left unresolved and FBX
import is still sub-par in the current Godot releases.
After some experimentation, we're instead adding a new importer that
relies on Facebook's `fbx2gltf` command line tool to convert FBX to
glTF, so that we can then use our well-maintained glTF importer.
See #59653 and https://github.com/facebookincubator/FBX2glTF for details.
* Resource that allows saving textures embedded in scenes or standalone.
* Supports only formats that are portable: Lossy, Lossles or BasisUniversal
This is something I wanted to add for a long time. I made it now because @fire
requires it for importing GLTF2 files with embedded textures, but also this
will allow saving Godot scenes as standalone binary files that will run
in all platforms (because textures will load everywhere).
This is ideal when you want to distribute individual standalone assets online
in games that can be built from Godot scenes.
Lets you drag or place .blend files in the project folder and it will import the files.
Checks for Blender 3.0's gltf2 `export_keep_originals` option.
Add basepath support to GLTFDocument append_from_file.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
SConstruct change also makes it possible to outright delete the `editor`
folder in a `tools=no` build, which we use in CI to ensure no invalid
cross-dependencies are added.
The UDP method is now called `is_socket_connected` to limit confusion
with the actual host connection status which doesn't make sense in UDP.
The TCP method is completly dropped, use get_status instead.
The only one left is the WebSocketPeer one, which should be fine as is
for now.
* Ability to create script languages from GDExtension
* Some additions to gdnative_extension.h to make this happen
* Moved the GDExtension binder to core
This now allows creating scripting languages from GDExtension, with the same ease as if it was a module. It replaces the old PluginScript from Godot 3.x.
Warning: GodotCPP will need to be updated to support this (it may be a bit of work as ScriptInstance needs to be created over there again).
* GDScriptLanguage::complete_code already adds parentheses to function calls, and does this a lot smarter than the language server right now.
* Instead of the previous naive approach we now reuse the same logic as the internal editor.
* For this to have any effect we also have to send the `insertText` field already during the completionRequest and not only during resolve.
PhysicsServer3DExtension inherits from PhysicsServer3D which is a
singleton class, since singleton classes are generated as static in C#
it would generate invalid C# so for now we'll be
ignoring PhysicsServer3DExtension.
