There are two ways a class can be added to ClassDB:
- `A`: When an instance of the class is created for the first time. When
this happends the class is not registered/exposed to scripts.
- `B`: When calling `GDREGISTER_CLASS(ClassName)` or similar. When this
happens the class is registered/exposed to scripts.
ClassDB has an API type property to differentiate between the core
and editor APIs. Up until now the API type was determined whenever
the class is added to ClassDB (either `A` or `B`).
The problem comes when a class is instantiated (`A`) before
being registered (`B`).
If at this point the current defined API is not the same as when the
class is later registered, this will result in a mismatch between
`--editor` and non-editor apps.
This is specially bad for C# as it makes the editor player abort.
This was happening with `EditorPaths` which, while being registered
during the editor API classes registrations, it was also being
instantiated earlier when running the editor or the project manager,
via a call to `EditorPaths::create()`. This regression was introduced
in 1074017f04.
This commit fixes this simply by re-assigning the class API type when
the class is registered (`B`).
This is correct because API type describes registered/exposed classes.
It shouldn't cause any regressions as the API type should not be
accessed of classes that are not (or not yet) registered/exposed.
Code locations for reference:
- Method to add a class to ClassDB: `ClassDB::_add_class2`
- Code that adds classes to ClassDB post first initialization (`A`):
`memnew` macros -> `Object::_postinitialize` ->
`Object::initialize_class` -> `ClassDB::_add_class2`.
- Code adds class to ClassDB and registers/exposes it to scripts:
`GDREGISTER_CLASS` macros -> `ClassDB::register_class<T>` ->
`Object::initialize_class` -> `ClassDB::_add_class2`.
The previous error message incorrectly suggested that any Basis could be fixed by calling get_rotation_quation() or orthonormalize(). This PR points out that only a valid rotation Basis can be fixed in this way.
This commit completely removes the RPC_MODE_MASTER ("master" keyword),
and renames the RPC_MODE_PUPPET to RPC_MODE_AUTHORITY ("auth" keyword).
This commit also renames the "Node.[get|set]_network_master" methods to
"Node.[get|set]_network_authority".
This commit also renames the RPC_MODE_REMOTE constant to RPC_MODE_ANY.
RPC_MODE_MASTER in Godot 3.x meant that a given RPC would be callable by
any puppet peer on the master, while RPC_MODE_PUPPET meant that it would
be callable by the master on any puppet.
Beside proving to be very confusing to the user (referring to where it
could be called instead of who can call it) the RPC_MODE_MASTER is quite
useless. It is almost the same as RPC_MODE_REMOTE (anyone can call) with
the exception that the network master cannot. While this could be useful
to check in some case, in such a function you would anyway need to check
in code who is the caller via get_rpc_sender_id(), so adding the check
there for those rare cases does not warrants a dedicated mode.
Segment collision results could be different depending on the direction
when they exactly touch (order of the points in segments). This was due
to the way parallelism was checked, using different logic based on
positive or negative sign of cross products.
Now the results are the same whatever the direction, without changing
the current design, which is that parallel or colinear segments are
not considered colinear.
Fixes inconsistencies with raycasts exactly on edges of convex shapes
depending on the direction.
* Exposed functions in Engine to register and unregister singletons.
* Added the concept of user singletons, which can be removed (the system ones can't).
Adds ability to add error return documetation to the binder and class reference.
Usage example:
```C++
void MyClass::_bind_method() {
[..]
BIND_METHOD_ERR_RETURN_DOC("load", ERR_FILE_CANT_OPEN, ERR_FILE_UNRECOGNIZED);
}
```
One function of ConfigFile was changed as example.
* Allows calling into native extensions directly with a pointer
* Makes it easier to implement some APIs more efficiently
* Appears with a "*" in the documentation for the argument.
* Implementing the pointer handling is entirely up to the implementation, although the extension API provides some hint.
* AudioStream has been implemented as an example, allowing to create NativeExtension based AudioStreams.
* `_gui_input`, `_input`, `_unhandled_input` and `_unhandled_key_input` are now regular C++ virutal functions.
* Everything else converted to GDVIRTUAL
* BIND_VMETHOD is gone, always use the new syntax from now on.
Creating `_gui_input` method and using the binder to register events will no longer work, simply override the virtual function now.
The constructor was expecting a mutable pointer, while the passed pointer was immutable ( returns a const pointer), so the compilation was failing when iterating a constant .
* New syntax is type safe.
* New syntax allows for type safe virtuals in native extensions.
* New syntax permits extremely fast calling.
Note: Everything was replaced where possible except for `_gui_input` `_input` and `_unhandled_input`.
These will require API rework on a separate PR as they work different than the rest of the functions.
Added a new method flag METHOD_FLAG_OBJECT_CORE, used internally. Allows to not dump the core virtuals like `_notification` to the json API, since each language will implement those as it is best fits.
* Extensions are now scanned and loaded on demand.
* Extensions found are cached into a file that is used to load them (which is also exported).
* Editor will ask to restart when an extension requires core functionality.
* Editor will attempt to load extensions always before importing or loading scenes. This ensures extensions can register the relevant types.
Capsule height and radius setters can modify each other, rather than
using clamping, to avoid cases where values are not set correctly when
loading a scene (depending on the order of properties).
Inspector undo/redo:
Added the possibility to link properties together in the editor, so
they can be undone together, for cases where a property can modify
another one.
Gizmo undo/redo:
Capsule handles pass both radius and height values so they can be undone
together.
Like the spawn/despawn feature, it can be completely overridden with 2
custom callables.
The callables will be called with the list of tracked objects.
In SERVER mode, objects are automatically tracked, while in CUSTOM mode
you can manually track them via `track`/`untrack` (but that's optional).
The default sync only happens from server to client, with batch updates,
over unreliable channel (but with custom ordering).
The default sync will warn you, if your state representation gets too
big.
Move the former "spawnables" functions to a dedicated
MultiplayerReplicator class.
Support custom overrides in replicator.
Spawn/despawn messages can now contain a state.
The state can be automatically encoded/decoded by passing the desired
object properties to `spawnable_config`.
You can use script properties to optimize the state representation.
2 Callables can be also specified to completely override the default
implementation for sending and receiving the spawn/despawn event.
(9 bytes overhead, and there's room for improvement here).
When using a custom implementation `spawn` and `despawn` can be called
with any Object, `send_spawn`/`send_despawn` can receive any Variant as
a state, and the path is not required.
Two new functions, `spawn` and `despawn`, convey the implementation
independent method for requesting a spawn/despawn of an Object, while
`send_spawn` and `send_despawn` represent the more low-level send event
for a Variant to be used by the custom implementations.
Fixes undefined behavior, and fixes the logic for negative powers of ten.
Fixes#51764.
Adds tests to validate the changes and prevent regressions.
Adds docs for `String.num`.
- Add MethodBind call (besides ptrcall), since vararg methods don't work
with ptrcall.
- Fix argument name in register constant function to the way it
actually is used in the engine.
- Change the integer constant type to GDNativeInt to keep it consistent.
* Make Undo/Redo menu items disabled when clicking it does nothing.
* Context menu of `TextEdit`
* Context menu of `LineEdit`
* Editor's Scene menu
* Script editor's Edit menu and context menu (for Script and Text)
* Make editor undo/redo log messages translatable.
* Mark `UndoRedo`'s `has_{un,re}do()` methods as `const`.
* Expose `TextEdit`'s `has_{un,re}do()` to scripts since `{un,re}do()` are already available.
This is done by providing API access to app specific directories which don't have any limitations and allows us to bump the target sdk version to 30.
In addition, we're also bumping the min sdk version to 19 as version 18 is no longer supported by Google Play Services and only account of 0.3% of Android devices.
Fixes behavior of these methods:
`InputMap::event_get_action_status`
`InputEvent*::action_match`
Previously when `p_pressed` was `nullptr`, `p_strength` would be set to
`0.0f` regardless of event strength. This affected `InputEventAction` events
processed by `Input.parse_input_event` for example.
Regression found in afa89c9eea
This PR and commit adds a new IK system for 3D with the Skeleton3D node
that adds several new IK solvers, as well as additional changes and functionality
for making bone manipulation in Godot easier.
This work was sponsored by GSoC 2020 and TwistedTwigleg
Full list of changes:
* Adds a SkeletonModification3D resource
* This resource is the base where all IK code is written and executed
* Adds a SkeletonModificationStack3D resource
* This node oversees the execution of the modifications and acts as a bridge of sorts for the modifications to the Skeleton3D node
* Adds SkeletonModification3D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK
* Each modification is in it's own file
* Several changes to Skeletons, listed below:
* Added local_pose_override, which acts just like global_pose_override but keeps bone-child relationships intract
* So if you move a bone using local_pose_override, all of the bones that are children will also be moved. This is different than global_pose_override, which only affects the individual bone
* Internally bones keep track of their children. This removes the need of a processing list, makes it possible to update just a few select bones at a time, and makes it easier to traverse down the bone chain
* Additional functions added for converting from world transform to global poses, global poses to local poses, and all the same changes but backwards (local to global, global to world). This makes it much easier to work with bone transforms without needing to think too much about how to convert them.
* New signal added, bone_pose_changed, that can be used to tell if a specific bone changed its transform. Needed for BoneAttachment3D
* Added functions for getting the forward position of a bone
* BoneAttachment3D node refactored heavily
* BoneAttachment3D node is now completely standalone in its functionality.
* This makes the code easier and less interconnected, as well as allowing them to function properly without being direct children of Skeleton3D nodes
* BoneAttachment3D now can be set either using the index or the bone name.
* BoneAttachment3D nodes can now set the bone transform instead of just following it. This is disabled by default for compatibility
* BoneAttachment3D now shows a warning when not configured correctly
* Added rotate_to_align function in Basis
* Added class reference documentation for all changes
It uses the (`const T &&... p_args`) forward reference, to avoid copying the
memory in case it's an rvalue, or pass a reference in case it's an lvalue.
This is an example:
```c++
PagedAllocator<btShapeBox> box_allocator;
btShapeBox* box = box_allocator.alloc( btVector3(1.0, 1.0, 1.0) );
```
Input buffering is implicitly used by event accumulation, but this commit makes it more generic so it can be enabled for other uses.
For desktop OSs it's currently not feasible given main and UI threads are the same).
- API has been simplified: all events now go through `parse_input_event()`. Whether they are accumulated or not depends on the `use_accumulated_input` flag.
- Event accumulation is now thread-safe (it was not needed so far, but it prepares the ground for the following changes).
- Touch drag events now support accumulation.
With this commit the macro `memnew_placement` uses the standard memory
placement syntax: `new (mem) TheClass()`, and removes the outdated and
not used syntax:
```
_ALWAYS_INLINE_ void *operator new(size_t p_size, void *p_pointer, size_t check, const char *p_description) {
```
Thanks to this change, the function `memnew_placement` call is compatible with
any class, and can also initialize classes with non-empty constructor:
```
// This is valid, like before.
memnew_placement(mem, Variant);
// This works too:
memnew_placement(mem, Variant(123));
```
This makes it clearer that this property is only about physics FPS,
not rendering FPS.
The `physics_fps` project setting was also renamed to
`physics_ticks_per_second` for consistency.
`PackedScene`s can be configured to be spawnable via a new
`MultiplayerAPI.spawnable_config` method.
They can be configured either to be spawned automatically when coming
from the server or to always require verification.
Another method, `MultiplayerAPI.send_spawn` lets you request a spawn on
the remote peers.
When a peer receive a spawn request:
- If it comes from the server and the scene is configured as
`SPAWN_MODE_SERVER`:
- Spawn the scene (instantiate it, add it to tree).
- Emit signal `network_spawn`.
- Else:
- Emit signal `network_spawn_request`.
In a similar way, `despawn`s are handled automatically in
`SPAWN_MODE_SERVER`.
In `SPAWN_MODE_SERVER`, when a new client connects it will also receive,
from the server all the spawned (and not yet despawned) instances.
The Transform::xform and xform_inv are made safe for Planes when using non-uniform scaling.
Optimization of calling sites to prevent loss of performance from the changes to xform(Plane).
These methods were broken by 22419082d9
5 years ago and nobody complained, so maybe they're not so useful...
But at least this should restore them to a working state.
- Fix library loading and initialization.
- Add extra methods/parameters in the interface needed by extenstions.
- Add Variant destructors and functions for extracting values and
creating Variants from values.
This sends the Godot object instance back to the extension so they can
keep a pointer for function calls.
Incidentally fix argument order on instance bindings callback for free()
- Fix type size information.
- Validate sizes at compile time (for the current build configuration
only).
- Normalize type names.
- Add extra information.
Adds a few more complex edge cases which are supported.
Also adds some documentation, simplifies the code a bit and forbids using
double quotes as a delimiter.
This seems to be a pretty old bug, older then originally reported (at
least under certain circumstances).
The IP singleton uses a resolve queue so developers can queue hostnames
for resolution in a separate while keeping the main thread unlocked
(address-resolution OS functions are blocking, and could block for a long
time in case of network disruption).
In most places though, the address resolution function was called with
the mutex locked, causing other functions (querying status, queueing
another hostname, ecc) to block until that resolution ended.
This commit ensures that all calls to OS address resolution are done
with the mutex unlocked.
Implemented "output" event
Refactored "seq" field generation
Prevent debugging when editor and client are in different projects
Removed unneeded references to peer on the parser
Refactored way to detect project path
Implemented "setBreakpoints" request
Fix double events when terminating from client
Refactored "stopped" event
Implemented "stopped" with breakpoint event
Implemented "stackTrace", "scopes" and "variables" request
Report incoming number of stack dump variables
Implemented proper reporting of scopes and variables from stack frames
Prevent editor from grabbing focus when a DAP session is active
Implemented "next" and "stepIn" requests
Implemented "Source" checksum computing
Switched expected errors from macros to silent guards
Refactored message_id
Respect client settings regarding lines/columns behavior
Refactored nested DAP fields
Implement reporting of "Members" and "Globals" scopes as well
Fix error messages not being shown, and improved wrong path message
Variants like dictionaries and arrays can have cyclic references, which
caused `encode_variant` to run an infinite recursion.
Instead of keeping a stack and looking for cyclic references which would
make serialization slower, this commit adds a `MAX_RECURSION_DEPTH`
constant to Variant, and have `encode_variant` keep track of the current
recursion depth, bailing when it's too high since this likely means a
cyclic reference has been encountered.
Used by ENetMultiplayerPeer and WebSocketServer to generate network IDs,
and exposed to the user for p2p networks (e.g. WebRTCMultiplayerPeer)
and custom MultiplayerPeer implementations.
This should fix various issues where retrieving enum values from
scripting languages would result in corrupted values (where 32 bits
were valid, and the other 32 random data).
Found via `codespell -q 3 -S ./thirdparty,*.po,./DONORS.md -L ackward,ang,ans,ba,beng,cas,childs,childrens,dof,doubleclick,fave,findn,hist,inout,leapyear,lod,nd,numer,ois,ony,paket,seeked,sinc,switchs,te,uint`
* Most resource types now have unique identifiers.
* Applies to text, binary and imported resources.
* File formats reference both by text and UID (when available). UID always has priority.
* Resource UIDs are 64 bits for better compatibility with the engine.
* Can be represented and used textually, example `uuid://dapwmgsmnl28u`.
* A special binary cache file is used and exported, containing the mappings.
Example of how it looks:
```GDScript
[gd_scene load_steps=2 format=3 uid="uid://dw86wq31afig2"]
[ext_resource type="PackedScene" uid="uid://bt36ojelx8q6c" path="res://subscene.scn" id="1_t56hs"]
```
GDScript, shaders and other special resource files can't currently provide UIDs, but this should be doable with special keywords on the files.
This will be reserved for future PRs.
* Clean-up of node_3d_editor_plugin.{h,cpp}: removed unused code, fixed some bugs.
* Moved node_3d_editor_gizmos.{h,cpp} to editor/plugins.
* Added support for multiple gizmos per node. This means custom gizmos will no longer override the built-in ones and that multiple gizmos can be used in more complex nodes.
* Added support for handle IDs. When adding handles to a gizmo, an ID can be specified for each one, making it easier to work with gizmos that have a variable number of handles.
* Added support for subgizmos, selectable elements that can be transformed without needing a node of their own. By overriding _subgizmo_intersect_frustum() and/or _subgizmo_intersect_ray() gizmos can define which subgizmos should be selected on a region or click selection. Subgizmo transformations are applied using get/set/commit virtual methods, similar to how handles work.
The various get_meta, set_meta, has_meta, get_meta_list, remove_meta
functions now uses StringName, allowing further optimizations via the
SNAME macro when used from C++ (this PR does not change the various
usage though).
* Friendlier with version control.
* Generates pseudo unique IDs, to minimize conflicts when merging, but still
user readable (so, not UUID).
* Eventually will also allow to have more precisely named sub-resources in
imported files.
* This will allow better reloading on changes (including resources already
loaded) as well as better keeping track of changes on the DCC.
* Keeps backward compatibility with the old formats.
* Binary and text format version incremented to mark breakage in forward
compatibility.
The `Math_INF` and `Math_NAN` defines were just aliases for those
constants, so we might as well use them directly.
Some portions of the code were already using `INFINITY` directly.
* Added explicit return type to the SNAME macro.
* Add some extra SNAME usages.
* Change some ClassDB methods to use const StringName & arguments.
* Cache the Window parent in Control because it's used in
is_layout_rtl(), which is called often.
* Only enable internal processing for viewports that need it.
* Change CanvasItem::group to be a StringName because it's only used as
that.
- Move the "sync" property for RPCs to RPCConfig.
- Unify GDScript annotations into a single one:
- `@rpc(master)` # default
- `@rpc(puppet)`
- `@rpc(any)` # former `@remote`
- Implement three additional `@rpc` options:
- The second parameter is the "sync" option (which also calls the
function locally when RPCing). One of "sync", "nosync".
- The third parameter is the transfer mode (reliable, unreliable,
ordered).
- The third parameter is the channel (unused for now).
* Added a new macro SNAME() that constructs and caches a local stringname.
* Subsequent usages use the cached version.
* Since these use a global static variable, a second refcounter of static usages need to be kept for cleanup time.
* Replaced all theme usages by this new macro.
* Replace all signal emission usages by this new macro.
* Replace all call_deferred usages by this new macro.
This is part of ongoing work to optimize GUI and the editor.
