Added additional param to action related methods to test for exactness.
If "p_exact_match" is true, then the action will only be "matched" if the provided input event *exactly* matches with the action event.
Before:
* Action Event = KEY_S
* Input Event = KEY_CONTROL + KEY_S
* Is Action Pressed = True
Now:
You can still do the above, however you can optionally check that the input is exactly what the action event is:
* Action Event = KEY_S
* Input Event = KEY_CONTROL + KEY_S
* p_exact_match = True
* Is Action Pressed = False
* If the Input Event was only KEY_S, then the result would be true.
Usage:
```gdscript
Input.is_action_pressed(action_name: String, exact_match: bool)
Input.is_action_pressed("my_action", true)
InputMap.event_is_action(p_event, "my_action", true)
func _input(event: InputEvent):
event.is_action_pressed("my_action", false, true) # false = "allow_echo", true = "exact_match"
event.is_action("my_action", true)
```
Co-authored-by: Eric M <itsjusteza@gmail.com>
The default autoplace algorithm places instances in the highest priority Room. It became apparent that there are some situations in which users will want to override this and force placement in a Room from a particular RoomGroup, especially an "outside" RoomGroup.
This setting allows the user to specify a preference for Room priority. When set to 0, the setting is ignored and the highest priority Room is chosen.
Higher values will make indirect lighting brighter.
A value of 1.0 represents physically accurate behavior, but higher values
can be used to make indirect lighting propagate more visibly when using
a low number of bounces.
This can be used to speed up bake times by lowering the number of bounces
then increasing the bounce indirect energy. Unlike BakedLightmapData's
energy property, this property does not affect direct lighting
emitted by light nodes or emissive materials.
This pull request fixes an assortment of typos and improves conciseness in `Animation`, `Area2D`, `Array`, `ArrayMesh`, `Control`, `Directory`, `EditorPlugin`, `Engine`, and `OS`.
(cherry picked from commit 9a72b0d3d0)
Investigations have showed that a lot of the random variation in frame deltas causing glitches may be due to sampling the time at the wrong place in the game loop.
Although sampling at the start of Main::Iteration makes logical sense, the most consistent deltas may be better measured after the location likely to block at vsync - either the OpenGL draw commands or the SwapBuffers.
Here we add an experimental setting to allow syncing after the OpenGL draw section of Main::Iteration.
Implemented splitting of vertex positions and attributes in the vertex
buffer
Positions are sequential at the start of the buffer, followed by the
additional attributes which are interleaved
Made a project setting which enables/disabled the buffer formatting
throughout the project
Implemented in both GLES2 and GLES3
This improves performance particularly on tile-based GPUs as well as
cache performance for something like shadow mapping which only needs
position data
Updated Docs and Project Setting
Make sure the direction of the motion is preserved, unless the depth is
higher than the margin, which means the body needs depenetration in any
direction.
Also changed move_and_slide to avoid sliding on the first motion, in
order to avoid issues with unstable position on ground when jumping.
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
Fixing by applying the movement in two steps, first the platform
movement, and then the body movement. Plus, add the platform movement
when we are on_wall.
Frame deltas are currently measured by querying the OS timer each frame. This is subject to random error. Frame delta smoothing instead filters the delta read from the OS by replacing it with the refresh rate delta wherever possible.
This PR also contains code to estimate the refresh rate based on the input deltas, without reading the refresh rate from the host OS.
This pull request adds a missing method description to `PopupMenu`.
This completes the documentation for `PopupMenu` and enhances usability by doing so.
Update doc/classes/PopupMenu.xml
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
(cherry picked from commit 2e3cbbcd11)
When appending text (either via `set_text()` or by pasting from clipboard),
if the input would make the `LineEdit` exceed its configured `max_length`,
the input text is truncated to fit. The discard part is passed as a parameter
in the `text_change_rejected` signal.
Fixes#33321.
Fixes#41278.
Also cleaned up unimplemented `max_chars` property in `TextEdit`.
Co-authored-by: Tony-Goat <70238376+Tony-Goat@users.noreply.github.com>
(cherry picked from commit 9a1ce8e6c3)
Clean: remove duplicate and interior vertices (uses Bullet algorithm)
Simplify: modify the geometry for further simplification (uses VHACD
algorithm)
In the editor, single convex hull now uses the clean option.
Added a new editor entry to create a simplified convex hull, can be
useful for creating convex hull from highly tessellated triangle meshes.
Specific change for 3.x:
Add support for Vector<Vector3> and PoolVector<Vector3> in the convex hull generator.
This pull request adds several descriptions to multiple different classes.
This improves the completeness of the documentation and enhances usability by doing so.
(cherry picked from commit 27e9df7778)
Fix more cases of node path needing an update when nodes are renamed or
moved in the editor.
Built-in node properties:
Before, node paths were checked only for script export variables. Now
all properties are checked from the node, which includes built-in node
properties.
Allows proper node path updates for nodes like remote transform, physics
joints, etc.
Arrays and dictionaries:
Node paths nested in array and dictionary properties are now also
updated in the editor.
Also update the documentation to be clear about node path update in the
editor and at runtime.
Co-authored-by: latorril <latorril@gmail.com>
(cherry picked from commit 3e4e530523)
This commit adds a new method to the `InputMap`, allowing the user to get the value of an action's dead zone as a float.
(cherry picked from commit c6f28ed62b)
The CylinderMesh generation code handles this special case and
avoids generating the top and bottom faces if their radius is equal
to 0. This improves performance by reducing the number of vertices
to draw.
If both values are set to 0, nothing will be visible but the mesh
generation will still succeed.
This also improves the CylinderMesh class documentation.
(cherry picked from commit b4ed84ba2b)
This is an older, easier to implement variant of CAS as a pure
fragment shader. It doesn't support upscaling, but we won't make
use of it (at least for now).
The sharpening intensity can be adjusted on a per-Viewport basis.
For the root viewport, it can be adjusted in the Project Settings.
Since `textureLodOffset()` isn't available in GLES2, there is no
way to support contrast-adaptive sharpening in GLES2.
This can be used by editor plugins and non-game applications to
store data in the correct directories according to the
XDG Base Directory specification.
This backports the improved RayCast debug drawing functionality
from the `master` branch.
`ArrayMesh.clear_surfaces()` was also backported from the `master`
branch and exposed because the new debug drawing code requires it.
Physics FPS above 1000 cause the whole project to slow down
and are not very practical in the first place (since no CPU currently
available can keep up).
(cherry picked from commit 8f4ac7bc4a)
Add two new functions to the IP class that returns all addresses/aliases associated with a given address.
This is a cherry-pick merge from 010a3433df which was merged in 2.1, and has been updated to build with the latest code.
This merge adds two new methods IP.resolve_hostname_addresses and IP.get_resolve_item_addresses that returns a List of all addresses returned from the DNS request.
Updated the `SceneTree.quit()` method to include a note that on iOS this method won't work as apps are expected to be closed via the Home button, not programmatically.
(cherry picked from commit c63af17a31)
Added documentation to some `add_*_plugin` methods and the corresponding `remove_*_plugin` methods.
Added an example of how to register a plugin to `add_inspector_plugin` and linked to it in the other methods.
(cherry picked from commit e849157e07)
Proofread add_*_plugin/remove_*_plugin descriptions in EditorPlugin
(cherry picked from commit 21f0961610)
Default missing keys to Unix time 0 (1970-01-01 at 00:00:00 UTC).
Abort if year <= 0, this is not supported by the current algorithm.
Prevents an infinite loop further down.
Fixes#49022.
(cherry picked from commit 62efa30ed2)
This can be used to tell Godot to run an executable that will run Godot
rather than running Godot directly. This is useful to make Godot start
on the dedicated GPU when using a NVIDIA Optimus setup on Linux:
`prime-run %command%`
The `editor/run/main_run_args` setting declaration was moved to make it
visible in the ProjectSettings documentation.
(cherry picked from commit ce4aa07276)
This commits adds a new emitter type for particles material
and 3D CPU particles. The new emitter is called "ring"
and it can emit either in a ring or cylinder fashion.
This adds the following properties for the emitter:
1. ring_emitter_axis: the axis along which the ring/cylinder
will be constructed
2. ring_emitter_radius: outer radius of the ring/cylinder
3. ring_emitter_inner_radius: inner radius of the cylinder.
when set to zero, particles will emit in the full volume.
4. ring_emitter_height: height of the ring/cylinder emitter.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
As a bonus, to have consistency between use Beziers and create insert tracks, use Beziers also gets a default via editor settings that is used when the confirmation dialog is disabled, instead of just falling back to creating non-Bezier tracks.
