* Adds both a preview sun and preview environment to the 3D editor.
* They are valid as long as a DirectionalLight3D and WorldEnvironment are not in the scene.
* If any is added to the scene, the respective preview is disabled.
* Changed WorldEnvironment to better handle multiple node versions.
* Added a function in SceneTree to get the first node in a group.
* Fixed button minimum size to also consider font height if no text is there, this broke with the TextSever PR.
Implements https://github.com/godotengine/godot-proposals/issues/1835#issuecomment-727186192
* PauseMode is now ProcessMode, containing the following states:
```
PROCESS_MODE_INHERIT, // same as parent node
PROCESS_MODE_NORMAL, // process only if not paused
PROCESS_MODE_PAUSE_ONLY, // process only if paused
PROCESS_MODE_ALWAYS, // process always
PROCESS_MODE_DISABLED, // never process
```
* NOTIFICATION_PAUSED and NOTIFICATION_UNPAUSED are received effectively when the node is paused and unpaused (not any longer when pause mode is set in SceneTree).
* Renamed some nodes that used ProcessMode/process_mode to specify a callback type to ProcessCallback to avoid clashes.
- Based on C++11's `atomic`
- Reworked `SafeRefCount` (based on the rewrite by @hpvb)
- Replaced free atomic functions by the new `SafeNumeric<T>`
- Replaced wrong cases of `volatile bool` by the new `SafeFlag`
- Platform-specific implementations no longer needed
Co-authored-by: Hein-Pieter van Braam-Stewart <hp@tmm.cx>
This removes hardcoded actions from things like LineEdit and TextEdit.
Previously, things like copy, paste, etc were all hardcoded to Ctrl+C, Ctrl+V, etc. They could not be changed. This allows the possibility of them being changed, by making them use the action map. This has the added benefit of greatly simplifying the input handling logic in those controls. The logic which was previously in a huge and hard to follow switch statement has been extracted to individual methods.
-Advanced Settings toggle also hides advanced properties when disabled
-Simplified Advanced Bar (errors were just plain redundant)
-Reorganized rendering quality settings.
-Reorganized miscelaneous settings for clean up.
-Only update rendering settings when project settings change
-Fixes the update spinner (and editor rendering) updating all the time.
-Added a "project_settings_changed" signal to EditorNode and EditorPlugin
-Added a new method in Resource: reset_state , used for reloading the same resource from disk
-Added a new cache mode "replace" in ResourceLoader, which reuses existing loaded sub-resources but resets their data from disk (or replaces them if they chaged type)
-Because the correct sub-resource paths are always loaded now, this fixes bugs with subresource folding or subresource ordering when saving.
-For inspector refresh, the inspector now detects if a property change by polling a few times per second and then does update the control if so. This process is very cheap.
-For property list refresh, a new signal (property_list_changed) was added to Object. _change_notify() is replaced by notify_property_list_changed()
-Changed all objects using the old method to the signal, or just deleted the calls to _change_notify(<property>) since they are unnecesary now.
This commit adds a view-dependant fade to the 3D viewport grid. It fades out
at steep view angles to hide the solid regions that appear far from the camera.
I also included a fade to hide the grid borders.
I added some improvements to the dynamic grid when the camera is in orthogonal mode.
It properly handles zoom now, and the grid center is now set to the intersection point
between the grid plane and the camera forward ray, keeping the grid
always visible.
- fixes scale values of 0.0013 (det == 0.00004) not rendering, they should render even at small values, but not at zero like the editor grid plugin supplies zero exactly.
- fixes node_3d_editor_plugin visibility bug when scale is zero
- fix culling with small scaling values - which are still valid to be rendered like 0.00004
note: grid is still not fixed, it has det == 0 issues but this fixes one of them.
-All shadow rendering is done with raster now (no compute)
-All shadow rendering is done by rendering directly to the shadow atlas
-Improved how buffer clearing is done to optimize the above.
-Ability to set shadows as 16 bits.
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
Fixes#44761, was a regression from #44524.
The PR passed CI because EditorNode::get_viewport() used to shadow Node::get_viewport()
(which was a bug in itself, fixed by #44524), so once it was renamed the existing code
relying on it fell back to the now available Node::get_viewport().
This might bite some thirdparty modules too.
As a bonus, to have consistency between use Beziers and create insert tracks, use Beziers also gets a default via editor settings that is used when the confirmation dialog is disabled, instead of just falling back to creating non-Bezier tracks.
This makes it possible to view far away objects without
having to tweak any settings. This results in a more usable
editor when working on large-scale levels.
This change should have no impact on performance, but note that
Z-fighting will be visible at a distance. This can be made less
visible by increasing the Znear value (however, doing so will cause
nearby surfaces to disappear).
This change was also applied to the editor, but it will only
apply to newly created scenes.
This also changes the default camera settings in the glTF importer
to match the Camera node's defaults.
-Happens on import by default for all models
-Just works (tm)
-Biasing can be later adjusted per node or per viewport (as well as globally)
-Disabled AABB.get_support test because its broken
- Brighten gizmos when highlighted to make the difference between a
non-highlighted and a highlighted gizmo more visible.
- Tweak the manipulator gizmo size property hint.
fix for issue #44282
AABB for collision geometry was being calculated based on parent nodes transform without consideration for collision geometries translation.
Also hopefully clarified logic for selecting starting point for ray cast
-Changed how mesh data is organized, hoping to make it more efficient on Vulkan and GLES.
-Removed compression, it now always uses the most efficient format.
-Added support for custom arrays (up to 8 custom formats)
-Added support for 8 weights in skeleton data.
-Added a simple optional versioning system for imported assets, to reimport if binary is newer
-Fixes #43979 (I needed to test)
WARNING:
-NOT backwards compatible with previous 4.x-devel, will most likely never be, but it will force reimport scenes due to version change.
-NOT backwards compatible with 3.x scenes, this will be eventually re-added.
-Skeletons not working any longer, will fix in next PR.
- ClassDoc added to GDScript and property reflection data were extracted
from parse tree
- GDScript comments are collected from tokenizer for documentation and
applied to the ClassDoc by the GDScript compiler
- private docs were excluded (name with underscore prefix and doesn't
have any doc comments)
- default values (of non exported vars), arguments are extraced from the
parser
- Integrated with GDScript 2.0 and new enums were added.
- merge conflicts fixed
unhandled_key_input changed to unhandled_button_input. Controls can set a 'shortcut_context' which they can then use to determine if their shortcuts should be triggered or not, based on if the viewport's focused GUI control is a child of their 'shortcut context'.
Resolvesgodotengine/godot-proposals#1246.
It is difficult to tell the difference between the handles for adjusting
curves and the points themselves when looking at a Path gizmo.
This re-uses the icons used for Path2D.
Unlike Path2D, this does not use a different icon for smooth vs sharp
points, as using a potentially different material for each point would
prevent batching the points in add_handles (and adding them out-of-order
messes up other logic based on handle indices).
This includes a public API change to allow specifying a texture for a
handle material. This allows spatial gizmo plugins to customize the way
a handle is rendered, if desired, but does not break existing behavior
(as providing no texture uses the default).
The path handle icons were resized as well. 16x16 is the standard icon
size. These icons were 10x10 rather than 16x16, and appeared rather
small in the editor.
To resize, I:
- Opened the original in Inkscape
- Resized the document to 16x16
- Opened the transform dialog
- Scaled by 160% proportionally
- Used Align/Distribute to center on the page
- Saved the document
- Cleaned with `svgcleaner --multipass`
- Draw two boxes slightly offset from each other to give the illustion
of a thicker outline.
- Decrease the offset compared to the 3D node's AABB to give a more
accurate representation of its size.
- Make the box fully visible instead of only displaying the corners.
- Draw a x-ray version of the box that's more translucent, but visible
through walls. This helps make the box more visible while still
having a sense of depth.
- Use an orange color similar to the 2D editor.
-Removed normal/specular properties from nodes
-Create CanvasTexture, which can contain normal/specular channels
-Refactored, optimized and simplified 2D shaders
-Use atlas for light textures.
-Use a shadow atlas for shadow textures.
-Use both items aboves to make light rendering stateless (faster).
-Reorganized uniform sets for more efficiency.
Undo/redo log messages will now specify the modified node's
name (or number of modified nodes if several were modified).
On top of that, the new position/rotation/scale/pivot offset
will also be mentioned in the message.
