Sets `AlignOperands` to `DontAlign`.
`clang-format` developers seem to mostly care about space-based indentation and
every other version of clang-format breaks the bad mismatch of tabs and spaces
that it seems to use for operand alignment. So it's better without, so that it
respects our two-tabs `ContinuationIndentWidth`.
* Changed another instance of ERR_FAIL_COND in the same file to
ERR_FAIL_NULL_MSG instead.
* Checked for potential access of the viewport pointer elsewhere in same
file.
Fixes#54098
(cherry picked from commit 497b00a937)
Very low wait times behave in unpredictable ways depending on the
rendered frame rate. This is because the timeout signal is only emitted
once per rendered frame (or physics frame, depending on the timer's
process mode).
This is only available on the GLES3 backend.
This can be useful for advanced shaders, but it should generally
not be enabled otherwise as full precision has a performance cost.
For general-purpose rendering, the built-in debanding filter should
be used to reduce banding instead.
This is an older, easier to implement variant of CAS as a pure
fragment shader. It doesn't support upscaling, but we won't make
use of it (at least for now).
The sharpening intensity can be adjusted on a per-Viewport basis.
For the root viewport, it can be adjusted in the Project Settings.
Since `textureLodOffset()` isn't available in GLES2, there is no
way to support contrast-adaptive sharpening in GLES2.
Splits the URL into (scheme, host, port, path).
Supports both literal IPv4 and IPv6.
Strip credentials when present (e.g. http://user:pass@example.com/).
Use that function in both HTTPRequest and WebSocketClient.
(cherry picked from commit 3bb40669d5)
Previously if a disconnect occured while downloading a non recoverable error was displayed. This PR attempts to fix this by making sure `request_completed` signal is emitted with an `STATUS_CONNECTION_ERROR` response code.
(cherry picked from commit 70c39737db)
This fix request_completed being emitted two times, the first with the
result, the second as a failure when retrieving responses served with
read-until-EOF.
(cherry picked from commit d61cd469f1)
This fixes a bug where users of the scrollbar had to be very careful
not to move the mouse outside the viewport, otherwise the scrollbar
would drop its drag-action and stop scrolling until clicked again.
The existing behaviour had the side-effect of also dropping the
cosmetic highlighting of the scrollbar (in addition to the dragging),
for the specific case where the mouse was move outside the window.
The previous behaviour did nothing to remove the highlight if the
mouse was released (but not moved) inside the viewport.
This separate issue with the lingering highlight of the scrollbar
(until a mouse-movement action is performed inside the viewport) is
fixed in an immediate followup to this commit.
Closes bug #39634
(cherry picked from commit 44657db3e2)
- Mention the origin of the `get_node()` call.
- Mention whether the attempted path is absolute or relative.
See #46214.
(cherry picked from commit e6abdc943d)
This makes them easier to distinguish, especially when used
in a TileMap.
The default color's opacity has been slightly decreased to account
for the new outline.
- Based on C++11's `atomic`
- Reworked `SafeRefCount` (based on the rewrite by @hpvb)
- Replaced free atomic functions by the new `SafeNumeric<T>`
- Replaced wrong cases of `volatile` by the new `SafeFlag`
- Platform-specific implementations no longer needed
Co-authored-by: Hein-Pieter van Braam-Stewart <hp@tmm.cx>
- Based on C++11's `thread` and `thread_local`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed (except for the few cases of non-portable functions)
- Simpler for `NO_THREADS`
- Thread ids are now the same across platforms (main is 1; others follow)
Setting each point's position was missing for 3D. Now enabling collision
render debug will display contact points for 3D physics, the same way it
does for 2D physics.
Note: Multimesh rendering seems not to work in this scenario on master,
but it's working fine on 3.2.
(cherry picked from commit e5e9be8355)
This adds a new project setting (`physics/common/enable_pause_aware_picking`). It's disabled by default.
When enabled, it changes the way 2D & 3D physics picking behaves in relation to pause:
- When pause is set, every collision object that is hovered or captured (3D only) is released from that condition, getting the relevant mouse-exit callback., unless its pause mode makes it immune from pause.
- During the pause. picking only considers collision objects immune from pause, sending input events and enter/exit callbacks to them as expected.
- When pause is left, nothing happens. This is a big difference with the classic behavior, which at this point would process all the input events that have been queued against the current state of the 2D/3D world (in other words, checking them against the current position of the objects instead of those at the time of the events).
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
(cherry picked from commit b5334d14f7)
Prevents `Timer` to prematurely start and timeout immediately if internal
processing is enabled manually with `Timer.set_process_internal(true)` or
`Timer.set_physics_process_internal(true)`.
Even if the internal processing is enabled manually, the user still has to
actually start the timer with `start()` method explicitly.
(cherry picked from commit afcb6f38db)
The return type for `_make_custom_tooltip` is clarified as Control, and users
should make sure to return a visible node for proper size calculations.
Moreover in the current master branch, a PopupPanel will be added as parent
to the provided tooltip to make it a sub-window.
Clarifies documentation for `Control._make_custom_tooltip`, and shows how to
use the (until now undocumented) "TooltipPanel" and "TooltipLabel" theme types
to style tooltips.
Fixes#39677.
(cherry picked from commit c5d8dafec4)
Previously, when the mouse was released after dragging a scrollbar,
its highlight was not dropped (if the mouse cursor was still inside
the viewport). This seems to be because the currently hovered control
only gets updated when the mouse is moved.
This commit fixes the dropping of the cosmetic highlight by running
the check for whether the currently hovered control has changed on
mouse-clicks, in addition to to the existing mouse-movements.
(cherry picked from commit e8804b9978)
Every NOTIFICATION_PROCESS the spatial_editor_plugin.cpp is calling set_use_fxaa which is causing a redraw_request(). Same with debanding.
These can be fixed be checking for noop state changes.
It can be enabled in the Project Settings
(`rendering/quality/filters/use_debanding`). It's disabled
by default as it has a small performance impact and can make
PNG screenshots much larger (due to how dithering works).
As a result, it should be enabled only when banding is noticeable enough.
Since debanding requires a HDR viewport to work, it's only supported
in the GLES3 backend.
Change error checking in `duplicate_signals()` to check for path to
`p_original`, thus adhering to the method used in `duplicate`, instead
of checking for ownership.
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
(cherry picked from commit cd4e46ee65)
This adds 2 new values (items and draw calls) to the performance monitor in a '2d' section, rather than reusing the 3d values in the 'raster' section.
This makes it far easier to optimize games to minimize drawcalls.
Regression from #34040, apparently making this a const reference
introduces issues (not sure why, but previous code worked fine).
Fixes#34691.
Co-authored-by: dankan1890 <mewuidev2@gmail.com>
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
When own_world property is set, the viewport stores a unique resource for the world. With this change it keeps being updated from changes made to the world property instead of storing a default empty world with environment settings that can't be modified.
Fixes#23412
