The program would fail if the parameter is passed as null in set_primary_interface because
in the print_verbose, the get_namea) method is called on the parameter and this causes a
failure if the parameter that was passed is null.
The moment of inertia calculation for BoxShape is:
```
Vector3(
(p_mass / 3.0) * (ly * ly + lz * lz),
(p_mass / 3.0) * (lx * lx + lz * lz),
(p_mass / 3.0) * (lx * lx + ly * ly));
```
where the final line includes both the x and y extents.
However, for CapsuleShape3D, CylinderShape3D, ConvexPolygonShape3D, ConcavePolygonShape3D, and HeightMapShape3D, the final line read `(p_mass / 3.0) * (extents.y * extents.y + extents.y * extents.y)`. I believe this is a mistake, considering the comment in each case mentions using an AABB approximation, which should follow the same approach as BoxShape.
This change corrects the final line to include both the x and y components of the shape's extent.
The angular velocity estimate for kinematic bodies was calculated
incorrectly. Also, fixes its use in some kinematic/rigid collision
calculations.
3.3 version of #47130
Test specific axes before falling back to GJK-EPA algorithm to get more
accurate separation axes for common cases, the same way it's done for
cylinder-cylinder collision.
In the case of falling back to GJK-EPA algorithm to generate cylinder
contact points, margins were never taken into account.
This fixes the depenetration phase for kinematic bodies and allows
consistent floor detection for cylinder shapes.
- Fix objects with no material being considered as fully transparent by the lightmapper.
- Added "environment_min_light" property: gives artistic control over the shadow color.
- Fixed "Custom Color" environment mode, it was ignored before.
- Added "interior" property to BakedLightmapData: controls whether dynamic capture objects receive environment light or not.
- Automatically update dynamic capture objects when the capture data changes (also works for "energy" which used to require object movement to trigger the update).
- Added "use_in_baked_light" property to GridMap: controls whether the GridMap will be included in BakedLightmap bakes.
- Set "flush zero" and "denormal zero" mode for SSE2 instructions in the Embree raycaster. According to Embree docs it should give a performance improvement.
Changes default ninepatch mode to preserve compatibility, and renames default mode to 'fixed'.
Also adds an editor restart to changing ninepatch mode and software skinning, which will be more user friendly.
More work is needed to make sure that those options actually solve users' issues, so we prefer to remove the options for 3.2.4 and revisit for a future release.
this was causing issues with scenes where the origin of the objects
was set for all objects to the center of the scene, making transparent
objects sort improperly
This work was kindly sponsored by IMVU
Co-authored-by: RevoluPowered <gordon@gordonite.tech>
Automatically set the `baked_light` bool when applying a lightmap to an
instance. This ensures the disabling of dynamic lights when the
bake mode is set to ALL.
The rendering/quality/2d section of project settings is becoming considerably expanded in 3.2.4, and arguably was not the correct place for settings that were not really to do with quality.
3.2.4 is the last sensible opportunity we will have to move these settings, as the only existing one likely to break compatibility in a small way is `pixel_snap`, and given that the whole snapping area is being overhauled we can draw attention to the fact it has changed in the release notes.
Class reference is also updated and slightly improved.
`pixel_snap` is renamed to `gpu_pixel_snap` in the project settings and code to help differentiate from CPU side transform snapping.
Two common problems have emerged as a result of transform snapping:
1) Camera jitter with a camera following a snapped object
2) Pixel gaps between e.g. a platform and a player, where a platform rounds down and a player rounds up
Using round seems to greatly reduce problems due to camera jitter. It also may prove better for pixel gaps because pixel art is often designed on a grid, so whole numbers are too expected, which are unstable with floor().
These are benign but worth fixing as it clears the log to find more important errors.
A common problem with the sanitizer is that enums are often used to represent bits (e.g. 1, 2, 4, 8 etc) but without specifying the enum type, the compiler is free to use unsigned or signed int. In this case it uses int, and when it performs bitwise operations on the int type, the sanitizer complains.
This is probably because a bitshift with negative signed value can give undefined behaviour - the sanitizer can't know ahead of time that you are using the enum for sensible bitflags.
- Based on C++11's `atomic`
- Reworked `SafeRefCount` (based on the rewrite by @hpvb)
- Replaced free atomic functions by the new `SafeNumeric<T>`
- Replaced wrong cases of `volatile` by the new `SafeFlag`
- Platform-specific implementations no longer needed
Co-authored-by: Hein-Pieter van Braam-Stewart <hp@tmm.cx>
- Based on C++11's `thread` and `thread_local`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed (except for the few cases of non-portable functions)
- Simpler for `NO_THREADS`
- Thread ids are now the same across platforms (main is 1; others follow)
- Based on C++11's `mutex` and `condition_variable`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed
- Simpler for `NO_THREADS`
- Based on C++11's `mutex`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed
- Simpler for `NO_THREADS`
- `BinaryMutex` added for special cases as the non-recursive version
- `MutexLock` now takes a reference. At this point the cases of null `Mutex`es are rare. If you ever need that, just don't use `MutexLock`.
- `ScopedMutexLock` is dropped and replaced by `MutexLock`, because they were pretty much the same.
This change makes test_body_motion more reliable when the kinematic body
recovers from being stuck.
- When recovery occurs, the rest information is generated, in order to
make sure collision results from test_move, move_and_collide and
move_and_slide are consistent and return a collision in case of overlap.
- The new calculation for recovery vector makes sure the recovery is
never more than the overlap depth between shapes.
This can help with cases where the kinematic body overlaps with several
shapes.
Recovery is made iteratively, without forcing a full overlap at each
step. This helps with getting proper rest information when recovery
occurs.
- One Way Collision:
When attempting motion, contact direction is checked against motion
before skipping in order to solve cases where kinematic bodies can sink
into one-way collision shapes.
Rest info now sets max contact depth in order to properly handle one-way
collision.
- Low speed motion is now handled in the rest info, by never setting
min_allowed_depth lower than motion length.
Separation is always applied with full margin, otherwise contact is lost
when low speed motion occurs right after higher speed motion.
- Similar changes are applied to 3D in order to make 2D and 3D
consistent.
When making items visible from the visual server, the collision check is deferred to prevent two identical collision checks when set_pairable is called shortly after.
It turns out that for some items (especially meshes), set_pairable is never called. This PR detects this occurrence and forces a collision check at the end of the routine.
Channels that are inactive -or when playback has not started yet- will report -200 dB as their peak value (which is also the lowest value possible during playback).
(cherry picked from commit a2b3a73e2d)
Move definition of rendering/quality/filters/anisotropic_filter_level to
servers/visual_server.cpp, since both GLES2 and GLES3 now use it
rasterizer_storage_gles3.cpp: Remove a spurious variable write (the
value gets overwritten soon after)
A major feature lacking in the octree was proper support for setting visibility / activation. This meant that invisible objects were still causing lots of processing in the tree unnecessarily.
This PR adds proper support for activation, items are temporarily removed from the tree and collision detection when inactive.
Leaves in the bug fixes, but reverts the change to the update method.
Turns out the new update method of getting the scenarios was causing problems, I will need to consult with reduz on the best way of getting access to the scenarios for a single update per frame.
Doing multiple updates isn't terrible but it should be nicer to get a single update working, as it should be more efficient, and give a single point for pairing callbacks.
When set_static is called on a newly added object, the forced collision
check in BVH set_pairable was using an empty AABB, which caused
unnecessary collision checks at the origin, then a call to move was
checking again at the right position.
These changes ensure broadphase objects are added to the BVH tree with
proper AABB so collision checks are correctly done right away.
Octree & Basic broadphase trees are not affected by these changes.
Change render BVH update scheme from once per update_dirty_instances to a new update_scenarios function called once per draw.
Fix lights not being properly unpaired.
Fixed bug in add_changed_item where AABBs were not being updated due to more than one update per tick.
- Fix Embree runtime when using MinGW (patch by @RandomShaper).
- Fix baking of lightmaps on GridMaps.
- Fix some GLSL errors.
- Fix overflow in the number of shader variants (GLES2).
Completely re-write the lightmap generation code:
- Follow the general lightmapper code structure from 4.0.
- Use proper path tracing to compute the global illumination.
- Use atlassing to merge all lightmaps into a single texture (done by @RandomShaper)
- Use OpenImageDenoiser to improve the generated lightmaps.
- Take into account alpha transparency in material textures.
- Allow baking environment lighting.
- Add bicubic lightmap filtering.
There is some minor compatibility breakage in some properties and methods
in BakedLightmap, but lightmaps generated in previous engine versions
should work fine out of the box.
The scene importer has been changed to generate `.unwrap_cache` files
next to the imported scene files. These files *SHOULD* be added to any
version control system as they guarantee there won't be differences when
re-importing the scene from other OSes or engine versions.
This work started as a Google Summer of Code project; Was later funded by IMVU for a good amount of progress;
Was then finished and polished by me on my free time.
Co-authored-by: Pedro J. Estébanez <pedrojrulez@gmail.com>
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
(cherry picked from commit b5334d14f7)
Complete rewrite of spatial partitioning using a bounding volume hierarchy rather than octree.
Switchable in project settings between using octree or BVH for rendering and physics.
For RigidBodies, uses the collision normal determined by relative motion
to determine whether or not a one-way collision has occurred.
For KinematicBodies, performs additional checks to ensure a one-way
collision has occurred, and averages the recovery step over all collision
shapes.
Co-authored-by: Sergej Gureev <sergej.gureev@relex.fi>
Partially revert change allowing sprite get_rect snapping to be controlled by `pixel_snap` again rather than `transform_snap` (to prevent breaking compatibility). Adds a final `use_camera_snap` project setting to allow snapping viewports as in reduz original PR.
These were only put in for the betas, in order to test hypotheses for stalling on Macs. It seems that most of the problems in the Mac editor have been solved by fixing the excessive redraw_requests.
As a result no one has reported any results from these options, but in future we will be able to refer users to try the beta versions, so there is no need to include them in the stable release. Indeed they are only likely to cause confusion.
- Fixes Godot physics failing when the cast Shape is inside of, or
already colliding with another Shape.
- Fixes Bullet physics failing when there is no motion.
- Ensures Godot and Bullet physics behave the same.
- Updates the documentation to exclude the caveats for the failures and
differences.
As a result of the GLES specifications being vague about best practice for how buffers should be used dynamically, different GPUs / platforms appear to have different preferences.
Mac in particular seems to have a number of problems in this area, and none of the rendering team uses Macs. So far we have relied on guesswork to choose the best usage, but in an attempt to pin this down, this PR begins to introduce manual selection of options for users to test their configurations.
It can be enabled in the Project Settings
(`rendering/quality/filters/use_debanding`). It's disabled
by default as it has a small performance impact and can make
PNG screenshots much larger (due to how dithering works).
As a result, it should be enabled only when banding is noticeable enough.
Since debanding requires a HDR viewport to work, it's only supported
in the GLES3 backend.
Another bug in the octree has been discovered which can cause flickering in rare circumstances : #42895
For safety until this is fixed properly this PR reverts the default state of the octree to match the old behaviour, which doesn't appear exhibit the bug (or at least not as readily).
Batching is mostly separated into a common template which can be used with multiple backends (GLES2 and GLES3 here). Only necessary specifics are in the backend files.
Batching is extended to cover more primitives.
Don't apply lighting to objects when they have a lightmap texture and
the light is set to BAKE_ALL. This prevents applying the same direct
light twice on the same object and makes setting up scenes with mixed
lighting much easier.
Option in MeshInstance to enable software skinning, in order to test
against the current USE_SKELETON_SOFTWARE path which causes problems
with bad performance.
Co-authored-by: lawnjelly <lawnjelly@gmail.com>
Measure the distance from the line against the rotated object, not the
rotated line, when obtaining the object's supports against a line.
(cherry picked from commit 7e44682c03)
Keeps track of the order in which items are collected by
_collect_ysort_children, and uses that order to break
ties between items with similar Y positions.
(cherry picked from commit 8d3afa985b)
The thread model option for physics (2D) and rendering (single-unsafe,
single-safe, multithread), was causing crashes/locks when set as
multithreaded and exported for a platform that does not support threads
(namely HTML5).
This commit ensures that when threads support is not available, that
option is ignored, and the equivalent of "single-unsafe" is always used
instead.
(cherry picked from commit f3c6ac1d71)
Prevents adding new octants until a limiting number of elements have been added to the current octant. This enables balancing the benefits of brute force against the benefits of spatial partitioning. The limit can be set per octree.
Project settings are added for rendering octree to set the best balance per project depending on number of tests per frame / tick, and the amount of editing of the octree.
Fixes octants being leaked when removing elements.
Optimize octree with cached linear lists
Storing elements in octants using linked lists is efficient for housekeeping but very slow for testing. This optimization stores additional local_vectors with Element pointers and AABBs which are cached and only updated when a dirty flag is set on the octant.
This is selectable with 2 versions of Octree : Octree and Octree_CL, Octree being the old behaviour. At present the cached list version is only used for the visual server octree (rendering) as it has only been demonstrated to be faster there so far.
This uses slightly more memory (probably a few kb in most cases) but can be significantly faster during testing (culling etc).
Co-authored-by: Sergey Minakov <naithar@icloud.com>
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
(cherry picked from commit cd4e46ee65)
As the masked light list takes no account of layer_min and layer_max, the canvas_layed_id is passed to the _light_mask_canvas_items function where it can be used to reject lights outside the layer range.
Scaling tilemaps can cause border artifacts around the edges of tiles. This has been traced to precision issues in the GPU. This PR adds an adjustment to allow a minor contraction of the UVs of rects in order to compensate for the incorrect classification of texels across the UV border.
When using the default setting (layer 1 set only) nothing is stored in the tscn file for a Light2D, hence it relies on the value in the constructor.
The problem is the constructed value is 1 in Light2D, and -1 in RasterizerCanvas::Light. -1 results in all bits being set so all occluders are shown, rather than just those in layer 1.
This PR changes Rasterizer::Canvas constructor to set to 1. An alternative is to have -1 as the value for layer 1 throughout.
As it now seems like we will soon have GLES3 batching working using the same intermediate layer as GLES2, it makes more sense to reuse the same batching settings for both renderers rather than duplicate project settings for GLES2 and GLES3.
Each driver used to define the (same) project settings value, but the
setting names are not driver specific. Ovverriding is still possible via
platform tags.
(cherry picked from commit 90c7102b51)
It seems that particles (and some other features) do not work correctly on iOS in GLES2 because either many of the devices do not support half float compression, or the GL constant used to reference it from Godot is incorrect.
This PR adds a project setting in rendering/gles2/ to disable half-float compression on iOS.
Although 2D draws in painters order with strict ordering, in certain circumstances items can be reordered to increase batching / decrease state changes, without affecting the end result. This can be determined by an overlap test.
In situation with item:
A-B-A
providing the third item does not overlap the second, they can be reordered:
A-A-B
Items already contain an AABB which can be used for this overlap test.
1)
To utilise this, I have implemented item reordering (only for single rects for now), with the lookahead adjustable in project settings. This can increase performance in situations where items may not be grouped in the scene tree by texture. It can also be switched off (by setting lookahead to 0).
2)
This same trick can be used to help join items that are lit. Lit items previously would prevent joining completely, thus missing out on performance gains other than multi-command items such as tilemaps.
In this PR, lights are assigned as bits in a bitfield (up to 64, the optimization is disabled above this), and on each try_item (for joining), the bitfield for lights and shadows is constructed and compared with the previous items. If these match the 2 items can potentially be joined. However, this can only be done without changing the rendered result if an overlap test is successful.
This overlap test can be adjusted to join items up to a specific number of item references, selectable in project settings, or turned off.
3)
The legacy uniform single rect drawing routine seems to have been identified as the source of flicker, particularly on nvidia. However, it can also be up to 2x as fast. Because of the speed the batching contains a fallback where it can use the legacy single rect method, but I have now added a project setting to make this switchable. In most cases with batching it should not be necessary (as single rects are drawn less frequently) and thus the flickering can be totally avoided.
4)
This PR also fixes a color modulate bug when drawing light passes, in certain situations (particularly custom _draw routines with multiple rects).
5)
This PR also fixes#38291, a bug in the legacy renderer where light passes could draw rects in wrong position.
- Resurrect it for GL ES 2
- Apply roll over with `fmod()` instead of resetting it to 0
- Expose the setting from the `VisualServer`, since it does not belong in any specific rasterizer
Dual paraboloid shadowmaps were ending up with infinitely large volumes of area behind the hemisphere un-culled.
This change just adds a back plane to the convex shape used for the culling volume.
