- Use 3 bounces by default.
- Enable environment lighting from the scene by default.
- This is not done in `3.x` for compatibility with existing projects,
but it makes sense to do this by default since pretty much all
outdoor scenes benefit from this.
- Set the custom environment color to white (like ReflectionProbe).
- Its default energy is still 0, so it's invisible by default.
- Enable the generation of dynamic object probes by default.
- Tweak the `max_texture_size` property hint for better usability.
- Improve error messages when passing invalid sizes to
`LightmapGI.set_max_texture_size()`.
If the `speed_scale` is set to a negative value, the animation plays in reverse.
The second parameter of `play()` still reverses as before. if `speed_scale` and the second parameter of `play()` is true, the animation plays forward.
Also updates the documentation to better describe the pausing and playing behaviour.
Add the following properties to AnimatedSprite3D:
- `backwards` parameter in `play()`;
- `speed_scale`.
Both classes' internals are more similar, down to the line spacings. They've also been updated to be clearer and less inconsistent (e.g. `!frames.is_valid()` -> `frames.is_null()`, use SceneStringNames instead of CoreStringNames, rename the internal _queue_update to _queue_redraw)
"less" should be used for quantity, rather than "lesser".
Existing scripts that use `or_lesser` in `_get_property_list()`
will need to be updated to account for this change.
fixed a type and made it so area3d get_overlapping_x is similar to its counterpart func in area2d so that it uses TypedArray instead of Array and ERR_FAIL_COND_V_MSG instead of no message, also minimized array resize calls
This allows light sources to be specified in physical light units in addition to the regular energy multiplier. In order to avoid loss of precision at high values, brightness values are premultiplied by an exposure normalization value.
In support of Physical Light Units this PR also renames CameraEffects to CameraAttributes.
Per-light energy gives more control to the user on the final result of
volumetric fog. Specific lights can be fully excluded from volumetric fog
by setting their volumetric fog energy to 0, which improves performance
slightly. This can also be used to prevent short-lived dynamic effects
from poorly interacting with volumetric fog, as it's updated over several
frames by default unless temporal reprojection is disabled.
Volumetric fog shadows now obey Light3D's Shadow Opacity property as well.
The shadow fog fade property was removed as it had little visible impact
on the final scene's rendering.
The inspector now supports converting degrees to radians automatically when
using the `radians` hint, so all those utility bindings were redundant.
This cleans things up by making these properties with slash properly bound
to `set_param`/`get_param` which the users can call with the relevant enum.
This is a legacy of Godot 2 days before the inspector had support for groups.
"Properties" with a slash in their name can't be accessed from script unless
using `set()`/`get()` so they were not actual properties as far as script
languages are concerned.
Part of #17558.
Create and expose the method `get_collider_rid` in `RayCast2D` and `Raycast3D`.
This method returns the `RID` of the first object that the ray intersects, or an empty `RID` if no object is intersecting the fay (i.e. `is_colliding` returns `false`).
Fixes (re)parent issues with NavigationObstacle 2D and 3D (same as NavigationAgents).
Also adds the option from NavigationAgents to override the default navigation map.
- Increase font size and decrease pixel size.
- The font is rendered at the same physical size, but is more detailed,
which is visible when the camera is up close.
- Add an outline to improve readability on mixed-color backgrounds.
- The outline is fairly thick to ensure it doesn't get too grainy
at a distance (without requiring MSDF or mipmaps on the default
project font).
This can be used to make shadows translucent for a specific light.
The light distance fade system also uses this to smoothly fade the shadow
when the light fade transition distance is greater than 0.
`shader_uniform` is now consistenly used across both per-shader
and per-instance shader uniform methods. This makes methods easier
to find in the class reference when looking for them.
Particles won't move or rotate anymore with the node (or its parents)
by default. This new default behavior is generally more suited
to most use cases. Local coordinates can still be enabled on a per-node basis.
This affects both 2D and 3D particles, and both CPU and GPU-based particles.
This makes the default behavior consistent between SpriteBase3D,
BaseMaterial3D and imported glTF scene materials.
Alpha scissor threshold property hints now allows for more precise
adjustments as well.
Overall brightness is similar to the previous settings, but lighting
now fades off more naturally and reflections feature indirect lighting.
Performance is identical.
- Enable Use Two Bounces by default.
- Decrease Propagation to 0.5 to compensate for the second bounce.
- Adds more customization options to ProjectSettings.
- Displays navregion edge connections and navigation polygon edges in editor and at runtime.
- Majority of debug code moved from SceneTree to NavigationServer.
- Removes the irritating debug MeshInstance child node from NavigationRegion3D and replaces it with direct RenderingServer API.
The new default values are more usable in real world scenarios
when smooth fading of distant decals is desired for performance reasons.
The Decal distance fade property hints were adjusted based on the
GeometryInstance3D visibility range fade property hints. `or_greater`
was also added to allow specifying larger values if needed.
Implement built-in classes Vector4, Vector4i and Projection.
* Two versions of Vector4 (float and integer).
* A Projection class, which is a 4x4 matrix specialized in projection types.
These types have been requested for a long time, but given they were very corner case they were not added before.
Because in Godot 4, reimplementing parts of the rendering engine is now possible, access to these types (heavily used by the rendering code) becomes a necessity.
**Q**: Why Projection and not Matrix4?
**A**: Godot does not use Matrix2, Matrix3, Matrix4x3, etc. naming convention because, within the engine, these types always have a *purpose*. As such, Godot names them: Transform2D, Transform3D or Basis. In this case, this 4x4 matrix is _always_ used as a _Projection_, hence the naming.
Based on #62896, only implements the BPM support part.
* Implements BPM support in the AudioStreamOGG/MP3 importers.
* Can select BPM/Bar Size and total beats in a song file, as well as edit looping points.
* Looping is now BPM aware
* Added a special importer UI for configuring this.
* Added a special preview showing the audio waveform as well as the playback position in the resource picker.
* Renamed `AudioStream::instance` to `instantiate` for correctness.
This allows not accounting for certain visible meshes during baking
(such as foliage and thin fixtures).
This also adds a clarification about transparent materials always
being excluded in the OccluderInstance3D documentation.
Clean up and do fixes to hash functions and newly introduced murmur3 hashes in #61934
* Clean up usage of murmur3
* Fixed usages of binary murmur3 on floats (this is invalid)
* Changed DJB2 to use xor (which seems to be better)
The program crashes when trying to determine slice width/height if the
light texture is empty. This fix just returns an empty array, as if the
light texture does not exist.
- Specular can now be set above 1.0.
- Blur can be set to 0 to disable shadow blurring entirely, which is useful
on lights that have a non-zero size.
- When shadow blurring is disabled, lights that have a non-zero size will
not use PCSS-like soft shadows, speeding up shadow rendering
considerably.
- Some property hints now allow more precise values.
The ring's color changes depending on the attenuation model chosen,
and whether Max Distance is capping the distance the sound can be
heard at.
Cold colors are used when the volume cap is a "soft" cap (the sound
can still be heard past the distance, but only faintly).
Warm colors are used when the volume cap is a "hard" cap (the sound
can't be heard past the distance at all).
White is used for linear fade performed when the attenuation model
is Disabled and Max Distance is greater than 0.
No ring is drawn when the attenuation model is Disabled and Max Distance
is equal to 0 (since the sound can be heard from anywhere).
* Replace case-by-case extraction with PNAME & GNAME
* Fix group handling when group hint begins with property name
* Exclude properties that are PROPERTY_USAGE_NO_EDITOR
* Extract missing ADD_ARRAY*, ADD_SUBGROUP* macros
Temporarily removes agent from navigation map when parent node cannot process due to SceneTree pause and process_mode property. Normal process_mode does not work as other agents would still avoid the paused agents because they were still active on the navigation map and the rvo world. Also fixes potential crash when region_get_map or agent_get_map is called while no map is set.
* Map is unnecessary and inefficient in almost every case.
* Replaced by the new HashMap.
* Renamed Map to RBMap and Set to RBSet for cases that still make sense
(order matters) but use is discouraged.
There were very few cases where replacing by HashMap was undesired because
keeping the key order was intended.
I tried to keep those (as RBMap) as much as possible, but might have missed
some. Review appreciated!
Fixes NavigationObstacle2D/3D reporting a 'get_global_transform: Condition "!is_inside_tree()" error when estimating the agent radius.
The collisionshapes that are lower in the SceneTree order than the obstacle node are not loaded in the SceneTree yet so the global_transform function fails.
Also adds warning message when this happens.
- Rename setter/getter methods for consistency.
- Remove section in the inspector as there is now only 1 property
within the section.
- Add performance hints to property hints.
This feature makes it possible to workaround problems such as:
- long baking time due to heavy synchronization when parsing geometry
from mesh instances
- crash when freeing `NavigationMeshInstance` while baking
- errors when actively baking node tree is being detached from the
scene tree
These typedefs don't save much typing compared to the full `Ref<Resource>`
and `Ref<RefCounted>`, yet they sometimes introduce confusion among
new contributors.
Didn't commit all the changes where it wants to initialize a struct
with `{}`. Should be reviewed in a separate PR.
Option `IgnoreArrays` enabled for now to be conservative, can be
disabled to see if it proposes more useful changes.
Also fixed manually a handful of other missing initializations / moved
some from constructors.
Convert method signature parameters to const where it is possible
# Conflicts:
# drivers/gles3/rasterizer_canvas_gles3.cpp
# drivers/gles3/rasterizer_canvas_gles3.h
# editor/plugins/animation_state_machine_editor.cpp
# editor/plugins/animation_state_machine_editor.h
Add "generate_mipmap" font import option.
Add some missing features to the Sprite3D.
Move BiDi override code from Control to TextServer.
Add functions to access TextServer font cache textures.
Add MSDF related flags and shader to the standard material.
Change standard material cache to use HashMap instead of Vector.
This allows for lower field of view (or higher zoom) in orthogonal
and frustum camera modes.
The property hint also allows setting the size with greater precision.
SConstruct change also makes it possible to outright delete the `editor`
folder in a `tools=no` build, which we use in CI to ensure no invalid
cross-dependencies are added.
We might want to re-add something like this if/when we find a good use case
for it and do the effort to categorize all objects in the API properly.
Until then, it's better to remove that boilerplate since it's not needed.
Closes#18711.
3 options are available:
- Light and Sky (default)
- Light Only (new)
- Sky Only (equivalent to `use_in_sky_only = true`)
Co-authored by: clayjohn <claynjohn@gmail.com>
* Allows creating a GDExtension based 3D Physics Server (for Bullet, PhysX, etc. support)
* Some changes on native struct binding for PhysicsServer
This allows a 3D Physics server created entirely from GDExtension. Once it works, the idea is to port the 2D one to it.
* Previous "virtual" classes (which can't be instantiated) are not corretly named "abstract".
* Added a new "virtual" category for classes, they can't be instantiated from the editor, but can be inherited from script and extensions.
* Converted a large amount of classes from "abstract" to "virtual" where it makes sense.
Most classes that make sense have been converted. Missing:
* Physics servers
* VideoStream
* Script* classes.
which will go in a separate PR due to the complexity involved.
* Its not and will not be used for streaming.
* Streaming will be implemented in 4.1 and it will work different.
* It makes more sense to be called CompressedTexture since it imports and compresses texture files.
This can be used to fade lights and their shadows in the distance,
similar to Decal nodes. This can bring significant performance
improvements, especially for lights with shadows enabled and when
using higher-than-default shadow quality settings.
While lights can be smoothly faded out over distance, shadows are
currently "all or nothing" since per-light shadow color is no longer
customizable in the Vulkan renderer. This may result in noticeable
pop-in when leaving the shadow cutoff distance, but depending on the
scene, it may not always be that noticeable.
Using codespell 2.2-dev from current git.
Added `misc/scripts/codespell.sh` to make it easier to run it once in a
while and update the skip and ignore lists.
Improvements:
* Occluder3D is now an abstract type inherited by: ArrayOccluder3D, QuadOccluder3D, BoxOccluder3D, SphereOccluder3D and PolygonOccluder3D. ArrayOccluder3D serves the same purpose as the old Occluder3D (triangle mesh occluder) while the rest are primitives that can be used to manually place simple occluders.
* Occluder baking can now apply simplification. The "bake_simplification_distance" property can be used to set a world-space distance as the desired maximum error, set to 0.1 by default.
* Occluders can now be generated on import. Using the "occ" and "occonly" keywords (similar to "col" and "colonly" for colliders) or by enabling on MeshInstance3Ds in the scene's import window.
Fixes:
* Fixed saving of occluder files after bake.
* Fixed a small error where occluders didn't correctly update in the rendering server.
Bonus content:
* Generalized "CollisionPolygon3DEditor" so it can also be used to edit Resources. Renamed it to "Polygon3DEditor" since it was already being used by other things, not just colliders.
* Fixed a small bug in "EditorPropertyArray" where a call to "remove" was left after the "remove_at" rename.
Applying overlay materials into multi-surface meshes currently
requires adding a next pass material to all the surfaces, which
might be cumbersome when the material is to be applied to a range
of different geometries. This also makes it not trivial to use
AnimationPlayer to control the material in case of visual effects.
The material_override property is not an option as it works
replacing the active material for the surfaces, not adding a new pass.
This commit adds the material_overlay property to GeometryInstance3D
(and therefore MeshInstance3D), having the same reach as
material_override (that is, all surfaces) but adding a new material
pass on top of the active materials, instead of replacing them.
Each file in Godot has had multiple contributors who co-authored it over the
years, and the information of who was the original person to create that file
is not very relevant, especially when used so inconsistently.
`git blame` is a much better way to know who initially authored or later
modified a given chunk of code, and most IDEs now have good integration to
show this information.
To make baked colors of lights equal to dynamic colors of lights they have to be
converted to linear as the colors of dynamic lights are converted to linear by
RendererSceneRenderRD.
Makes the API for forces and impulses more flexible, easier to
understand and harmonized between 2D and 3D.
Rigid bodies now have 3 sets of methods for forces and impulses:
-apply_impulse() for impulses (one-shot and time independent)
-apply_force() for forces (time dependent) applied for the current step
-add_constant_force() for forces that keeps being applied each step
Also updated the documentation to clarify the different methods and
parameters in rigid body nodes, body direct state and physics servers.
This reduces visible banding in indirect lighting and reflections.
Sharp reflections now match more closely the original scene.
The downside of this change is that clipping may appear in reflections
in extremely bright scenes, but this should not be a concern in most
scenes.
GPUParticles attractors and collision are currently only available in 3D.
Their 2D counterparts haven't been implemented yet, but they will use
separate nodes.
We prefer to prevent using chained assignment (`T a = b = c = T();`) as this
can lead to confusing code and subtle bugs.
According to https://en.wikipedia.org/wiki/Assignment_operator_(C%2B%2B), C++
allows any arbitrary return type, so this is standard compliant.
This could be re-assessed if/when we have an actual need for a behavior more
akin to that of the C++ STL, for now this PR simply changes a handful of
cases which were inconsistent with the rest of the codebase (`void` return
type was already the most common case prior to this commit).
