Splits the URL into (scheme, host, port, path).
Supports both literal IPv4 and IPv6.
Strip credentials when present (e.g. http://user:pass@example.com/).
Use that function in both HTTPRequest and WebSocketClient.
(cherry picked from commit 3bb40669d5)
Previously if a disconnect occured while downloading a non recoverable error was displayed. This PR attempts to fix this by making sure `request_completed` signal is emitted with an `STATUS_CONNECTION_ERROR` response code.
(cherry picked from commit 70c39737db)
This fix request_completed being emitted two times, the first with the
result, the second as a failure when retrieving responses served with
read-until-EOF.
(cherry picked from commit d61cd469f1)
This fixes a bug where users of the scrollbar had to be very careful
not to move the mouse outside the viewport, otherwise the scrollbar
would drop its drag-action and stop scrolling until clicked again.
The existing behaviour had the side-effect of also dropping the
cosmetic highlighting of the scrollbar (in addition to the dragging),
for the specific case where the mouse was move outside the window.
The previous behaviour did nothing to remove the highlight if the
mouse was released (but not moved) inside the viewport.
This separate issue with the lingering highlight of the scrollbar
(until a mouse-movement action is performed inside the viewport) is
fixed in an immediate followup to this commit.
Closes bug #39634
(cherry picked from commit 44657db3e2)
- Mention the origin of the `get_node()` call.
- Mention whether the attempted path is absolute or relative.
See #46214.
(cherry picked from commit e6abdc943d)
This makes them easier to distinguish, especially when used
in a TileMap.
The default color's opacity has been slightly decreased to account
for the new outline.
- Based on C++11's `atomic`
- Reworked `SafeRefCount` (based on the rewrite by @hpvb)
- Replaced free atomic functions by the new `SafeNumeric<T>`
- Replaced wrong cases of `volatile` by the new `SafeFlag`
- Platform-specific implementations no longer needed
Co-authored-by: Hein-Pieter van Braam-Stewart <hp@tmm.cx>
- Based on C++11's `thread` and `thread_local`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed (except for the few cases of non-portable functions)
- Simpler for `NO_THREADS`
- Thread ids are now the same across platforms (main is 1; others follow)
Setting each point's position was missing for 3D. Now enabling collision
render debug will display contact points for 3D physics, the same way it
does for 2D physics.
Note: Multimesh rendering seems not to work in this scenario on master,
but it's working fine on 3.2.
(cherry picked from commit e5e9be8355)
This adds a new project setting (`physics/common/enable_pause_aware_picking`). It's disabled by default.
When enabled, it changes the way 2D & 3D physics picking behaves in relation to pause:
- When pause is set, every collision object that is hovered or captured (3D only) is released from that condition, getting the relevant mouse-exit callback., unless its pause mode makes it immune from pause.
- During the pause. picking only considers collision objects immune from pause, sending input events and enter/exit callbacks to them as expected.
- When pause is left, nothing happens. This is a big difference with the classic behavior, which at this point would process all the input events that have been queued against the current state of the 2D/3D world (in other words, checking them against the current position of the objects instead of those at the time of the events).
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
(cherry picked from commit b5334d14f7)
Prevents `Timer` to prematurely start and timeout immediately if internal
processing is enabled manually with `Timer.set_process_internal(true)` or
`Timer.set_physics_process_internal(true)`.
Even if the internal processing is enabled manually, the user still has to
actually start the timer with `start()` method explicitly.
(cherry picked from commit afcb6f38db)
The return type for `_make_custom_tooltip` is clarified as Control, and users
should make sure to return a visible node for proper size calculations.
Moreover in the current master branch, a PopupPanel will be added as parent
to the provided tooltip to make it a sub-window.
Clarifies documentation for `Control._make_custom_tooltip`, and shows how to
use the (until now undocumented) "TooltipPanel" and "TooltipLabel" theme types
to style tooltips.
Fixes#39677.
(cherry picked from commit c5d8dafec4)
Previously, when the mouse was released after dragging a scrollbar,
its highlight was not dropped (if the mouse cursor was still inside
the viewport). This seems to be because the currently hovered control
only gets updated when the mouse is moved.
This commit fixes the dropping of the cosmetic highlight by running
the check for whether the currently hovered control has changed on
mouse-clicks, in addition to to the existing mouse-movements.
(cherry picked from commit e8804b9978)
Every NOTIFICATION_PROCESS the spatial_editor_plugin.cpp is calling set_use_fxaa which is causing a redraw_request(). Same with debanding.
These can be fixed be checking for noop state changes.
It can be enabled in the Project Settings
(`rendering/quality/filters/use_debanding`). It's disabled
by default as it has a small performance impact and can make
PNG screenshots much larger (due to how dithering works).
As a result, it should be enabled only when banding is noticeable enough.
Since debanding requires a HDR viewport to work, it's only supported
in the GLES3 backend.
Change error checking in `duplicate_signals()` to check for path to
`p_original`, thus adhering to the method used in `duplicate`, instead
of checking for ownership.
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
(cherry picked from commit cd4e46ee65)
This adds 2 new values (items and draw calls) to the performance monitor in a '2d' section, rather than reusing the 3d values in the 'raster' section.
This makes it far easier to optimize games to minimize drawcalls.
Regression from #34040, apparently making this a const reference
introduces issues (not sure why, but previous code worked fine).
Fixes#34691.
Co-authored-by: dankan1890 <mewuidev2@gmail.com>
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
When own_world property is set, the viewport stores a unique resource for the world. With this change it keeps being updated from changes made to the world property instead of storing a default empty world with environment settings that can't be modified.
Fixes#23412
This allows setting the `read_chunk_size` of the internal HTTPClient.
This is important to reduce the allocation overhead and number of file
writes when downloading large files, allowing for better download speed.
A new external MSAA setting was introduced in https://github.com/godotengine/godot/pull/33518
that fixed issues on GLES2 and Oculus Mobile VR. To avoid misunderstanding it was suggested
by @BastiaanOlij and discussed on discord to rename it to AndroidVR.
Implemented uniform API in Viewport class to override 2D and/or
3D camera.
Added buttons in 2D and 3D editor viewport toolbars that override
the running game camera transform with the editor viewport camera
transform. Implemented via remote debugger protocol and camera
override API.
Removed LiveEditFuncs function pointers from ScriptDebugger class.
Since the debugger got access to the SceneTree instance (if one
exists), there is no need to store the function pointers. The live
edit functions in SceneTree are used directly instead. Also removed
the static version of live edit functions in SceneTree for the same
reason. This reduced the SceneTree -> Debugger coupling too since
the function pointers don't need to be set from SceneTree anymore.
Moved script_debugger_remote.h/cpp from 'core/' to 'scene/debugger/'.
This is because the remote debugger is now using SceneTree directly
and 'core/' classes should not depend on 'scene/' classes.
Recursive calls to Control::_modal_stack_remove could cause a crash because of the list element not being invalidated while being erased from the list.
It happens in the state machine case by hiding a line edit control when it loses focus.
Fixes#23808
Use case:
yield(get_tree().create_timer(2), "timeout")
Some resources were never released because the SceneTreeTimer was keeping a reference to GDScriptFunctionState in its signal connections, while GDScriptFunctionState was holding a reference to the SceneTreeTimer object. Cleaning all signal connections on game exit fixes the issue.
Fixes#29946
This method can be used to generate custom node warnings by script.
Node::_get_configuration_warning was already exposed to generate custom warnings, but it wasn't fully usable without being able to notify the scene tree when the warning needs to appear or change.
Clicking or using the scrollwheel outside of the focused control triggers a focus change. This makes sense for mouse clicks, but scrollwheeling outside the focuses control does not. This PR ignores scrollwheeling outside of the focused control.
HTTPRequest used to have its own `status` variable but it would never be
updated since the status of the client would be used instead.
This caused potential crashes in some edge cases.
The `status` variable is now removed, and the client status is used in
checks instead.
It's not necessary, but the vast majority of calls of error macros
do have an ending semicolon, so it's best to be consistent.
Most WARN_DEPRECATED calls did *not* have a semicolon, but there's
no reason for them to be treated differently.
