When physics interpolation is active on a node, it is essential that transforms are updated during "_physics_process()" rather than "_process()" calls, for the interpolation to give the correct result.
This PR adds optional warnings for instances, cameras and multimeshes which can flag updates being incorrectly called, and thus make these problems much easier to fix.
Move VisualServer interpolation data out of Scenario and into VisualServerScene, so the interpolation data and enabled status is now common to all Scenarios.
Fix physics interpolation in multithreaded mode by ensuring tick and pre-draw are called.
In order to properly support the resource sharing paradigm, Occluders are split into Instances and Resources in the VisualServer. Instances are owned by a Scenario, and Resources are global. OccluderShape resources can now correctly be shared by multiple OccluderInstances.
Adds fixed timestep interpolation to the visual server.
Switchable on and off with project setting.
This version does not add new API for set_transform etc, when nodes have the interpolated flag set they will always use interpolation.
Using codespell 2.2-dev from current git.
Added `misc/scripts/codespell.sh` to make it easier to run it once in a
while and update the skip and ignore lists.
(cherry picked from commit 1bdb82c64e)
- Prevent debug enforced use of ubershader on shaders not supporting it
- Use unsigned integer for ubershader flags
- Add project setting for disabling async shader compilation on mobile
- Stop sampling some textures through different kinds of samplers at the same time
- Add a range hint to the Viewport `shadow_atlas_size` property.
- Add range steps to the shadow resolution project settings that
match the lowest allowed values (since lower increments don't
make sense).
When editor continuous redraws is switched off, the editor only redraws when a redraw_request was issued by an element in the scene. This works well in most situations, but when scenes have dynamic content they will continuously issue redraw_requests.
This can be fine on high power desktops but can be an annoyance on lower power machines.
This PR splits redraw requests into high and low priority requests, defaulting to high priority. Requests due to e.g. shaders using TIME are assigned low priority.
An extra editor setting is used to record the user preference and an extra option is added to the editor spinner menu, to allow the user to select between 3 modes:
* Continuous
* Update all changes
* Update vital changes
Due to an optimization to prevent processing except when camera rooms changed, the ticking synchronization and updating of previous and current lists could get out of sync for affected objects, leading to missing gameplay notifications.
This PR adds new paths to properly support and synchronize objects in this "room based" path.
Refactors the BVH to make it more generic and customizable. Instead of hard coding the system of pairable_mask and pairable_type into the BVH, this information is no longer stored internally, and instead the BVH uses callbacks both for determining whether pairs of objects can pair with each other, and for filtering cull / intersection tests.
In addition, instead of hard coding the number of trees, the BVH now supports up to 32 trees, and each object can supply a tree collision mask to determine which trees it can collide against.
This enables the BVH to scale to either the two or 3 trees needed in physics, and the single tree used without pairing in Godot 4 render tree.
The gameplay monitor wasn't being unloaded correctly in between levels. This meant that exit signals were not being sent, and entered signals for the new level were being missed.
This PR sends appropriate exit signals on unloading, and clear the data.
Change the entire navigation system.
Remove editor prefix from nav mesh generator class. It is now used for baking
at runtime as well.
Navigation supports obstacle avoidance now with the RVO2 library.
Nav system will also automatically link all nav meshes together to form one
overall complete nav map.
The line width of thick lines was being applied on both sides of the line, resulting in a line that was twice as thick as requested.
This PR fixes this embarrassing oversight.
In rare circumstances, changing the geometry data attached to an instance, there was the opporunity for the lighting_dirty flag to get out of sync, which could lead to access to a stale light RID, and warnings or worse.
This PR fixes the problem by ensuring the lighting is always updated on the instance when first adding GeometryData.
Margin needs to have a high enough value for test body motion to work
properly (separate using the margin, move without then gather rest info
with the margin again).
Fixes issues with test motion returning no collision in some cases with
margin equal to 0.
(cherry picked from commit 0c354047e1)
This PR adds a define BVH_EXPAND_LEAF_AABBS which is set, which stores expanded AABBs in the tree instead of exact AABBs.
This makes the logic less error prone when considering reciprocal collisions in the pairing, as all collision detect is now taking place between expanded AABB against expanded AABB, rather than expanded AABB against exact AABB.
The flip side of this is that the intersection tests will now be less exact when expanded margins are set.
All margins are now user customizable via project settings, and take account of collision pairing density to adjust the margin dynamically.
Updating the broadphase to find new collision pairs was done after
checking for collision islands, so it was working in most cases due to
the pairing margin used in the BVH, but in case of teleported objects
the narrowphase collision could be skipped.
Now it's done before checking for collision islands, so we can ensure
that broadphase pairing has been done at the same time as objects are
marked as moved so their collision can be checked properly.
This issue didn't happen in the Octree/HashGrid because they do nothing
on update and trigger pairs directly when objects move instead.
Applying overlay materials into multi-surface meshes currently
requires adding a next pass material to all the surfaces, which
might be cumbersome when the material is to be applied to a range
of different geometries. This also makes it not trivial to use
AnimationPlayer to control the material in case of visual effects.
The material_override property is not an option as it works
replacing the active material for the surfaces, not adding a new pass.
This commit adds the material_overlay property to GeometryInstance
(and therefore MeshInstance), having the same reach as
material_override (that is, all surfaces) but adding a new material
pass on top of the active materials, instead of replacing them.
Implemented in rasterizer of both GLES2 and GLES3.
Correct transformation of normals that works with a Basis containing non-uniform scale is difficult to get correct for those not familiar with the maths, it is also rather verbose and hard to read in calling code. This PR adds helper functions which both standardize the approach and make it clearer in calling code what is being done and why.
Previously a crude metric was used to decide on the roaming expansion margin, but it created unexpected results in some scenarios. Instead this setting is exposed to the user via the RoomManager, allowing them to tailor it to the world size, room sizes, roaming objects sizes and the speeds of movement.
In all physics servers, body_get_direct_state() now silently returns
nullptr when the body has been already freed or is removed from space,
so the client code can detect this state and invalidate the body rid.
In 2D, there is no change in behavior (just no more errors).
In 3D, the Bullet server returned a valid direct body state when the
body was removed from the physics space, but in this case it didn't
make sense to use the information from the body state.
Async. compilation via ubershader is currently available in the scene and particles shaders only.
Bonus:
- Use `#if defined()` syntax for not true conditionals, so they don't unnecessarily take a bit in the version flagset.
- Remove unused `ENABLE_CLIP_ALPHA` from scene shader.
- Remove unused `PARTICLES_COPY` from the particles shader.
- Remove unused uniform related code.
- Shader language/compiler: use ordered hash maps for deterministic code generation (needed for caching).
Changes the Path2D drawing to use POLYLINE instead of thick lines.
Add a path to translate thick lines (that are not using anti-aliasing) to draw as polygons instead. This should be faster because polygons can be batched.
Sets `AlignOperands` to `DontAlign`.
`clang-format` developers seem to mostly care about space-based indentation and
every other version of clang-format breaks the bad mismatch of tabs and spaces
that it seems to use for operand alignment. So it's better without, so that it
respects our two-tabs `ContinuationIndentWidth`.
Changing the collision layer of a sleeping body was not triggering area
updates correctly.
Bodies need to be active for collision to be checked against already
overlapping bodies and areas.
Neighbors need to be activated too in order to handle the case where a
static body is modified (it can't be activated directly but paired
bodies need to check their collision again).
In 3D, moved the call to wakeup() from the physics server to
BodySW::_shapes_changed to make it consistent with 2D and also handle
the case where shapes are modified (_shapes_changed is called in both
this case and collision layer changes).
The BVH implementation is not checking collision layers on existing
pairs on move like other physics broadphases do.
This is solved by adding a new call to trigger pair callbacks again so
the physics engine can check layers again (specific to the BVH version,
other broadphase implementations just trigger a move like before).
This provides more realistic lighting with a very small performance cost.
The option is available in both GLES3 and GLES2, and can be enabled in
the Project Settings. This goes well with the ACES Fitted tonemapping mode
that was recently added.
When enabled, this also makes upgrading Godot 3.x projects to Godot 4.0 easier,
since lighting in 3.x will better match how it'll look in Godot 4.0.
These changes improve Rayshape behavior for Godot Physics 2D and 3D
when using move_and_slide with and without snapping.
Kinematic margin is now applied to ray shapes when handling snapping
collision tests and separation raycasts to help getting consistent
results in slopes and flat surfaces.
Recovery is calculated without the margin and a depth of 0 is still
considered a collision to stabilize results when on flat surface.
Recovery depth takes into account the current recovery vector (just like
test_body_motion) to fix jittering issues with multiple ray shapes due
to applying too much recovery.
Allows more flexible collision detection with different safe margin values.
Kinematic body motion changes in 2D and 3D:
-Recovery only for depth > min contact depth to help with collision
detection consistency (rest info could be lost if recovery was too much)
-Adaptive min contact depth (based on margin) instead of space parameter
Change the existing DEV_ASSERT function to be switched on and off by the DEV_ENABLED define. DEV_ASSERT breaks into the debugger as soon as hit.
Add error macros DEV_CHECK and DEV_CHECK_ONCE to add an alternative check that ERR_PRINT when a condition fails, again only enabled in DEV_ENABLED builds.
Browsers doesn't really like forcing the mix rate, e.g. Firefox does not
allow input (microphone) if the mix rate is not the default one, Chrom*
will exhibit worse performances, etc.
Sphere occluders are now tested for self occlusion. Spheres that are behind another sphere in the current view are superfluous so can be removed, cutting down on the runtime calculations.
AABBs are now maintained for Occluders as well as individual spheres, meaning a bunch of occluder spheres can be frustum rejected as a block.
Update mesh_surface_get_format_stride and
mesh_surface_make_offsets_from_format to return an array of offsets and
an array of strides in order to support vertex stream splitting
Update _get_array_from_surface to also support vertex stream splitting
Add a condition on split stream usage to ensure it does not get used on
dynamic meshes
Handle case when Tangent is compressed but Normal is not compressed
Make stream splitting option require a restart in the settings
Update SoftBody and Sprite3D to support and use strides and offsets
returned by updated visual_server functions
Update Sprite3D to use the dynamic mesh flag
Add framework for supporting geometrical occluders within rooms, and add support for sphere occluders.
Includes gizmos for editing.
They also work outside the portal system.
This was reported by UBSAN.
Many methods were discussed, in the end this has the least evils and will use a 0,0,1 default on decompress.
Please see the PR for more info https://github.com/godotengine/godot/pull/51268
This is only available on the GLES3 backend.
This can be useful for advanced shaders, but it should generally
not be enabled otherwise as full precision has a performance cost.
For general-purpose rendering, the built-in debanding filter should
be used to reduce banding instead.
Small bug in the logic, the roaming objects only should be set to done when they have been marked as visible, rather than the first time they are examined. This is because they can be seen in a room through multiple portals, and each needs to be tested until there is either a visible result or all the portals in are visited.
This backports the high quality glow mode from the `master` branch.
Previously, during downsample, every second row was ignored.
Now, when high-quality is used, we sample two rows at once to ensure
that no pixel is missed. It is slower, but looks much better and has
a much high stability while moving.
High quality also takes an additional horizontal sample the width of the
horizontal blur matches the height of the vertical blur.
Same thing that was already done in 2D, applies moving platform motion
by using a call to move_and_collide that excludes the platform itself,
instead of making it part of the body motion.
Helps with handling walls and slopes correctly when the character walks
on the moving platform.
Also made some minor adjustments to the 2D version and documentation.
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
When synchronizing KinematicBody motion with moving the platform using
direct body state, only the linear velocity was taken into account.
This change exposes velocity at local point in direct body state and
uses it in move_and_slide to get the proper velocity that includes
rotations.
Fixed a bug in the complex PVS generation which was causing recursive loop.
Move some of the settings out of RoomManager into Project Settings.
Allow PVS generation method to be selected from Project Settings, and control PVS logging.
Fixes a bug whereby it read from the primary PVS in the gameplay monitor, using the size from the secondary PVS. This would read out of bounds and crash.
Removed debug code to update the gameplay monitor from the preview camera - this is no longer required.
Temporarily revert to the simple PVS generation method, because I've noticed a bug in the complex version, and the simple version is safer while I fix this.
With the octahedral compression, we had attributes of a size of 2 bytes
which potentially caused performance regressions on iOS/Mac
Now add padding to the normal/tangent buffer
For octahedral, normal will always be oct32 encoded
UNLESS tangent exists and is also compressed
then both will be oct16 encoded and packed into a vec4<GL_BYTE>
attribute
The existing tracing routine for building the PVS was rather simple compared to the main portal tracing, and could not correctly cope with paths that went through multiple portals from room A to B, and as a result would sometimes miss room entries in the PVS resulting in too many culled rooms in these circumstances.
This PR adds an improved function that can cope with entering a room multiple times during a trace. As a result it has to take care of portal directions (to prevent going back on itself) in a similar, but not identical way to the main portal tracing routine, and internal rooms, to prevent recursive loops.
The Transform::xform and xform_inv are made safe for Planes when using non-uniform scaling.
Basic unit tests for Transform.
Optimization of calling sites to prevent loss of performance from the changes to xform(Plane).
In some situations looking out from an internal room it was possible to look back into the portal into the internal room.
This PR fixes this by keeping a single item 'stack' record of the last external room, and preventing recursing into this room. This also makes tracing significantly more efficient out of internal rooms, as there is no need to trace the external room multiple times.
Initial octahedral compression incorrectly wrote tangent to the buffer
using an offset of 3 rather than 4, losing the sign of the tangent
vector needed for things like tangent space for texturing mapping
GLES3 renderer used remove_custom_define rather than set_conditional to
change back to the default conditional state the scene shader should be
in
In 3D, collision is disabled between kinematic/static bodies when
contacts are generated only to report them.
In 2D, this case was already fixed but the code is cleaned to make
it easier to follow.
This PR makes the 'convert rooms' button permanently on the toolbar and accessible whichever node is selected, so you can convert rooms without having to select the RoomManager first.
It also adds a togglable item 'view portal culling' to the 'View' menu which is a simple way of setting the RoomManager 'active' setting without the RoomManager being the selected node.
Both of these have keyboard shortcuts, which should make it much faster to reconvert rooms and edit.
In addition there the string in the 'Perspective' Listbox is modified to show [portals active] when portal culling is operational, for visual feedback. This is updated when you change modes, and when the rooms are invalidated.
When using the preview camera feature it turns out as well as culling the game objects, this also culls the editor gizmos from the preview camera, which makes the editor hard to use in this mode.
To get around this problem we simply disable frustum culling for GLOBAL portal_mode objects when in preview camera mode. This could be a bit slower in an editor scene with lots of gizmos but is the simplest way of solving the problem.
