I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
Using `clang-tidy`'s `modernize-use-default-member-init` check and
manual review of the changes, and some extra manual changes that
`clang-tidy` failed to do.
Also went manually through all of `core` to find occurrences that
`clang-tidy` couldn't handle, especially all initializations done
in a constructor without using initializer lists.
This reverts commit ec7b481170.
This was wrong, `d` is not a distance but the `d` constant in the
parametric equation `ax + by + cz = d` describing the plane.
Part of #33027, also discussed in #29848.
Enforcing the use of brackets even on single line statements would be
preferred, but `clang-format` doesn't have this functionality yet.
Not sure if we should check revision too, but this is good enough for what we want.
This will be needed to load the correct Microsoft.Build when we switch to the nuget version.
- Include PDB files in exported games.
- Release export templates also allow debugging now.
Right now the only way to enable debugging in exported games is with the environment variables, which may be cumbersome or not even possible on some platforms.
Right now, games only work on devices when exported with FullAOT+Interpreter.
There are some issues left that need to addressed for FullAOT alone. Right now,
it's giving issues with the Godot.NativeCalls static constructor.
Don't store GC handles for C# script instances and instance bindings as 'Ref<MonoGCHandle>'; store the raw data instead. Initially this was not possible as we needed to store a Variant, but this had not been the case for a looong time yet the stored type was never updated.
Implementation for new Variant types Callable, Signal, StringName.
Added support for PackedInt64Array and PackedFloat64Array.
Add generation of signal members as events, as well as support for
user created signals as events.
NOTE: As of now, raising such events will not emit the signal. As such,
one must use `EmitSignal` instead of raising the event directly.
Removed old ThreadLocal fallback class. It's safe to use thread_local now since
it's supported on all minimum versions of compilers we support.
For us, it practically only changes the fact that `A<A<int>>` is now
used instead of the C++03 compatible `A<A<int> >`.
Note: clang-format 10+ changed the `Standard` arguments to fully
specified `c++11`, `c++14`, etc. versions, but we can't use `c++17`
now if we want to preserve compatibility with clang-format 8 and 9.
`Cpp11` is still supported as deprecated alias for `Latest`.
EngineDebugger is the new interface to access the debugger.
It tries to be as agnostic as possible on the data that various
subsystems can expose.
It allows 2 types of interactions:
- Profilers:
A subsystem can register a profiler, assigning it a unique name.
That name can be used to activate the profiler or add data to it.
The registered profiler can be composed of up to 3 functions:
- Toggle: called when the profiler is activated/deactivated.
- Add: called whenever data is added to the debugger
(via `EngineDebugger::profiler_add_frame_data`)
- Tick: called every frame (during idle), receives frame times.
- Captures: (Only relevant in remote debugger for now)
A subsystem can register a capture, assigning it a unique name.
When receiving a message, the remote debugger will check if it starts
with `[prefix]:` and call the associated capture with name `prefix`.
Port MultiplayerAPI, Servers, Scripts, Visual, Performance to the new
profiler system.
Port SceneDebugger and RemoteDebugger to the new capture system.
The LocalDebugger also uses the new profiler system for scripts
profiling.
Main:
- It's now implemented thanks to `<mutex>`. No more platform-specific implementations.
- `BinaryMutex` (non-recursive) is added, as an alternative for special cases.
- Doesn't need allocation/deallocation anymore. It can live in the stack and be part of other classes.
- Because of that, it's methods are now `const` and the inner mutex is `mutable` so it can be easily used in `const` contexts.
- A no-op implementation is provided if `NO_THREADS` is defined. No more need to add `#ifdef NO_THREADS` just for this.
- `MutexLock` now takes a reference. At this point the cases of null `Mutex`es are rare. If you ever need that, just don't use `MutexLock`.
- Thread-safe utilities are therefore simpler now.
Misc.:
- `ScopedMutexLock` is dropped and replaced by `MutexLock`, because they were pretty much the same.
- Every case of lock, do-something, unlock is replaced by `MutexLock` (complex cases where it's not straightfoward are kept as as explicit lock and unlock).
- `ShaderRD` contained an `std::mutex`, which has been replaced by `Mutex`.
- Renames PackedIntArray to PackedInt32Array.
- Renames PackedFloatArray to PackedFloat32Array.
- Adds PackedInt64Array and PackedFloat64Array.
- Renames Variant::REAL to Variant::FLOAT for consistency.
Packed arrays are for storing large amount of data and creating stuff like
meshes, buffers. textures, etc. Forcing them to be 64 is a huge waste of
memory. That said, many users requested the ability to have 64 bits packed
arrays for their games, so this is just an optional added type.
For Variant, the float datatype is always 64 bits, and exposed as `float`.
We still have `real_t` which is the datatype that can change from 32 to 64
bits depending on a compile flag (not entirely working right now, but that's
the idea). It affects math related datatypes and code only.
Neither Variant nor PackedArray make use of real_t, which is only intended
for math precision, so the term is removed from there to keep only float.
Added guards to all C# script interface calls to attach the current thread
for the current scope if the thread is not already attached.
This is far from ideal, as attaching the thread is not cheap and all managed
thread local storage is lost when we detach the thread at the end of the calls.
However, it's the best we can do for now to avoid crashing
when an unattached thread tries to interact with C# code.
Up until now, 'GD.Print' would convert parameters first to
Variant and only then to String. This meant parameters that cannot be
converted to Variant would be printed as "Null".
This commit makes 'GD.Print' fallback to 'System.Object.ToString()'
if the parameter could not be converted to Variant.
The same applies to all 'GD.Print' variants:
'GD.PrintS', 'GD.PrintT', 'GD.PrintErr' and 'GD.PrintRaw'.
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
Up until now debug builds would always wait up to 500 ms during initialization
to give time for debuggers to attach to the game.
We no longer want this as it increases startup time unnecesarily.
The way forward is to setup the debugger agent as client instead of server.
This way it's the game that connect to the debugger, not the other way around.
If server mode is still desired, suspend=y can be used to indefinitely wait
for the debugger to attach. This all can be specified with the environment
variable 'GODOT_MONO_DEBUGGER_AGENT' when launching the game.
`Variant::operator String()` returns "Null" if the type is `Variant:NIL`.
We must consider that and return a null `MonoString*` instead when marshalling.
This was also causing a "Null" error to be displayed when exporting a game
because null string members would be set to "Null" during hot-reload.
This appears to be necessary for current official builds cross-compiled
with MinGW from Linux, using Mono 6.6.0.160.
Follow-up to #31784, see #29812 for details.
- Added correct config file for android dllmaps.
- Fix __Internal DllImports with a dlopen fallback.
- Add missing P/Invoke functions and internal calls expected by the monodroid BCL and our custom version of the 'Android.Runtime.AndroidEnvironment' class (this last one can be found in the godot-mono-builds repo).
- Make sure to set 'btls' instead of 'legacy' as the default TLS provider on Android.
API hashes cannot be calculated on release builds, as bindings information is lacking. Therefore, we should not be comparing it with the generated glue hash as they will never match.
This will be used for communicating between the Godot editor and external IDEs/editors, for things like opening files, triggering hot-reload and running the game with a debugger attached.
Previously, when running the project manager, we would try to load the API assemblies from the project and fail because we were not editing any project. This would make us try to copy the prebuilt API assemblies to the project. Since there is no project, it would try to copy them to the executable location. This would fail if Godot doesn't have permissions to write to that location.
This commit fixes that by instead trying to load the prebuilt API assemblies in the first place, if running the project manager.
By default, an unhandled exception will cause the application to be terminated; but the project setting `mono/unhandled_exception_policy` was added to change this behaviour.
The editor is hard-coded to never terminate because of unhandled exceptions, as that would make writing editor plugins a painful task, and we cannot kill the editor because of a mistake in a thirdparty plugin.
If both the core and editor API assemblies are missing or out of sync, Godot will only update the former and then abort when trying to load them again because the latter was not updated. Godot will update it correctly the next time it's started, but this should not be needed and it should work the first time. This commit fixes that.
Remove the old API assembly invalidation system. It's pretty simple since now the editor has a hard dependency on the API assemblies and SCons takes care of prebuilding them.
If we fail to load a project's API assembly because it was either missing or outdated, we just copy the prebuilt assemblies to the project and try again. We also do this when creating the solution and before building, just in case the user removed them from the disk after they were loaded.
This way the API assemblies will be always loaded successfully. If they are not, it's a bug.
Also fixed:
- EditorDef was behaving like GlobalDef in GodotTools.
- NullReferenceException because we can't serialize System.WeakReference yet. Use Godot.WeakRef in the mean time.
Make the build system automatically build the C# Api assemblies to be shipped with the editor.
Make the editor, editor player and debug export templates use Api assemblies built with debug symbols.
Always run MSBuild to build the editor tools and Api assemblies when building Godot.
Several bugs fixed related to assembly hot reloading and restoring state.
Fix StringExtensions internal calls not being registered correctly, resulting in MissingMethodException.
- Only load the scripts metadata file when it's really needed. This way we avoid false errors, when there is no C# project, about missing scripts metadata file.
- The default log level in debug builds is now 'info' instead of 'debug'.
- Add option to specify a different log level with the 'GODOT_MONO_LOG_LEVEL' environment variable.
- The name of log files is now a readable date and time.
- Always print the log file path (previously it was printed only it in verbose mode).
Added constructor that takes IEnumerable for Array and IEnumerable<T> for Array<T>.
Added constructor that takes IDictionary for Dictionary and IDictionary<TKey, TValue> for Dictionary<TKey, TValue>.
Apparently we don't need to call mono_debug_close_image ourselves and we can call mono_image_close right away as it's not our duty to keep that reference.
Also fixed a wrong ifdef that was causing Mono to never be initialized if mscorlib was not found (which was the case with the utf8 assemblies path bug this commit fixes).
This condition was meant for exported projects only, not for the editor only.
This property returns an instance of the singleton.
The purpose of this is to allow using methods from the base class like 'Connect'.
Since all Godot singletons inherit Object, the type of the returned instance is Godot.Object.
This is needed to avoid aborting due to missing mscorlib for projects that do not use C#.
If 'res://.mono/' exists, then we assume the project uses C#, in which case a missing mscorlib should still abort.
Only possible if the object class is a "native type". If the object class is a user class (that derives a "native type") then a script is needed.
Since CSharpLanguage does cleanup of script instance bindings when finished, cases like #25621 will no longer cause problems.
Fixed ~Object() trying to free script instance bindings after the language has already been removed, which would result in a NULL dereference.
Avoid CSharpInstance from accessing its state after self destructing (by deleting the Reference owner).
It's now safe to replace the script instance without leaking or crashing.
Also fixed godot_icall_Object_weakref return reference being freed before returning.
By introducing an intermediate proxy class for the array subscript
operator for String and CharString we can control better when CowData
will actually CoW.
This should improve performance of String usage for most cases.
- Now there is only one solution that contains both GodotSharp and GodotSharpEditor project. Previously we had one solution for each project
- GodotSharpEditor reference GodotShatp with a 'ProjectReference'. Previously it was a 'Reference' to the assembly
- This also simplifies the command line option to generate this solution: 'godot --generate-cs-api <OutputDir>'
- Bundle editor dependencies:
- 'GodotSharp': Root data directory for the editor
- 'Tools': Editor dependencies. Only GodotSharp.dll for now.
- 'Api': Prebuilt GodotSharp and GodotSharpEditor API assemblies.
- 'Mono': Mono files to bundle with the editor.
- 'bin': (Optional, not used for now) Mono bin directory.
- 'etc': Mono configuration files.
- 'lib': Mono dependency shared libraries.
- 'lib/mono/4.5': Framework assemblies.
- Added build option to copy the required files from the mono installation to 'GodotSharp/Mono'. Enable with 'copy_mono_root=yes'. Disabled by default.
- Export template dependencies:
- 'data_AppName'/'data_Godot':
- 'Mono': Mono files to bundle with the game.
- 'etc': Mono configuration files.
- 'lib': Mono dependency shared libraries.
- The data directory is generated when compiling and must be bundled with the export templates. In the case of OSX, the data directory must be placed inside the 'osx.zip' export template.
- In OSX, alternative location for directories (needed for app bundles) are:
- 'data_AppName/Mono/etc' --> '../Resources/GodotSharp/Mono/etc'
- 'data_AppName/Mono/lib' --> '../Frameworks/GodotSharp/Mono/lib'
- The editor can bundle prebuilt API assemblies.
- Generate them with a tools build by running: `--generate-cs-core-api <GodotSharp_OutputDir> --generate-cs-editor-api <GodotSharpEditor_OutputDir> <GodotSharp_OutputDir>/bin/Release/GodotSharp.dll` (This command will be simplified in the future and both projects will be in the same solution)
- Build the solutions and copy the output files to '#bin/GodotSharp/Api'.
- Fixed API assembly being added twice during the export process.
This allows more consistency in the manner we include core headers,
where previously there would be a mix of absolute, relative and
include path-dependent includes.
When a Reference managed instance is garbage collected and its finalizer is called, it could happen that the native instance is referenced once again before the finalizer can unreference and memdelete it. The workaround is to create a new managed instance when this happens (at least for now).
- We no longer generate RID and NodePath C# classes. Both will be maintained manually.
- We no longer generate C# declarations and runtime registration of internal calls for the following classes: RID, NodePath, String, GD, SignalAwaiter and Godot.Object (partial base).
- We no longer auto-generate the base members of Godot.Object. They will be maintained manually as a partial class.
This makes it easier to maintain these C# classes and their internal calls, as well as the bindings generator which no longer generates C# classes that don't derive from Godot Object, and it no longer generates the Godot.Object base members (which where unreadable in the bindings generator code).
- Added missing 'RID(Object from)' constructor to the RID C# class.
- Replaced MONO_GLUE_DISABLED constant macro with MONO_GLUE_ENABLED.
- Add sources in module/mono/glue even if glue is disabled, but surround glue files with ifdef MONO_GLUE_ENABLED.
First of all, this fixes the handling of exceptions so the engine actually notices them,
it was broken in 4172fa03b5.
Next, unhandled exceptions now do NOT cause an abort(). They're logged now,
so before #16987. The pending exception thing still works though.
This commit makes operator[] on Vector const and adds a write proxy to it. From
now on writes to Vectors need to happen through the .write proxy. So for
instance:
Vector<int> vec;
vec.push_back(10);
std::cout << vec[0] << std::endl;
vec.write[0] = 20;
Failing to use the .write proxy will cause a compilation error.
In addition COWable datatypes can now embed a CowData pointer to their data.
This means that String, CharString, and VMap no longer use or derive from
Vector.
_ALWAYS_INLINE_ and _FORCE_INLINE_ are now equivalent for debug and non-debug
builds. This is a lot faster for Vector in the editor and while running tests.
The reason why this difference used to exist is because force-inlined methods
used to give a bad debugging experience. After extensive testing with modern
compilers this is no longer the case.
Fixes#18029.
There are ways to load assemblies that the search hook has no way of intercepting,
and handling itself. Such as loading from a byte[] in C# code.
We now handle these cases with a fallback assembly_load_hook,
to avoid crashes when this is indeed done.
- Setup runtime main args during initialization. This must be done manually by embedders who do not call mono_runtime_run_main. Fixes NullReferenceException in System.Environment.
- Continue to search the assembly in the rest of the search locations if loading it from one of them failed.
