Comments have been added for the following:
modules/mono/glue/GodotSharp/GodotSharp/Core/GodotTaskScheduler.cs
modules/mono/glue/GodotSharp/GodotSharp/Core/GodotSynchronizationContext.cs
modules/mono/glue/GodotSharp/GodotSharp/Core/Attributes/AssemblyHasScriptsAttribute.cs
modules/mono/glue/GodotSharp/GodotSharp/Core/Attributes/DisableGodotGeneratorsAttribute.cs
modules/mono/glue/GodotSharp/GodotSharp/Core/Attributes/ExportAttribute.cs
modules/mono/glue/GodotSharp/GodotSharp/Core/Attributes/GodotMethodAttribute.cs
modules/mono/glue/GodotSharp/GodotSharp/Core/Attributes/ScriptPathAttribute.cs
- Add support for explicit values in properties using `PROPERTY_HINT_FLAGS`
that works the same way it does for enums.
- Fix enums and flags in VisualScriptEditor (it wasn't considering the
explicit value).
- Use `PROPERTY_HINT_FLAGS` for C# enums with the FlagsAttribute instead
of `PROPERTY_HINT_ENUM`.
Adds support for generating C# bindings that use the generic `Array<T>`
type instead of the non-generic `Array` type when the registered ClassDB
method specifies the array element type.
* Map is unnecessary and inefficient in almost every case.
* Replaced by the new HashMap.
* Renamed Map to RBMap and Set to RBSet for cases that still make sense
(order matters) but use is discouraged.
There were very few cases where replacing by HashMap was undesired because
keeping the key order was intended.
I tried to keep those (as RBMap) as much as possible, but might have missed
some. Review appreciated!
Adds a new, cleaned up, HashMap implementation.
* Uses Robin Hood Hashing (https://en.wikipedia.org/wiki/Hash_table#Robin_Hood_hashing).
* Keeps elements in a double linked list for simpler, ordered, iteration.
* Allows keeping iterators for later use in removal (Unlike Map<>, it does not do much
for performance vs keeping the key, but helps replace old code).
* Uses a more modern C++ iterator API, deprecates the old one.
* Supports custom allocator (in case there is a wish to use a paged one).
This class aims to unify all the associative template usage and replace it by this one:
* Map<> (whereas key order does not matter, which is 99% of cases)
* HashMap<>
* OrderedHashMap<>
* OAHashMap<>
* Changed to use the same stages as extensions.
* Makes the initialization more coherent, helping solve problems due to lack of stages.
* Makes it easier to port between module and extension.
* removed the DRIVER initialization level (no longer needed).
These typedefs don't save much typing compared to the full `Ref<Resource>`
and `Ref<RefCounted>`, yet they sometimes introduce confusion among
new contributors.
* Ability to create script languages from GDExtension
* Some additions to gdnative_extension.h to make this happen
* Moved the GDExtension binder to core
This now allows creating scripting languages from GDExtension, with the same ease as if it was a module. It replaces the old PluginScript from Godot 3.x.
Warning: GodotCPP will need to be updated to support this (it may be a bit of work as ScriptInstance needs to be created over there again).
PhysicsServer3DExtension inherits from PhysicsServer3D which is a
singleton class, since singleton classes are generated as static in C#
it would generate invalid C# so for now we'll be
ignoring PhysicsServer3DExtension.
`DirAccess *` needs to be deleted manually, and this is often forgotten
especially when doing early returns with `ERR_FAIL_COND`.
`DirAccessRef` is deleted automatically when it goes out of scope.
Co-authored-by: bruvzg <7645683+bruvzg@users.noreply.github.com>
* Very old macros from the time Godot was created.
* Limited arguments to 5 (then later changed to 8) in many places.
* They were replaced by C++11 Variadic Templates.
* Renamed methods that take argument pointers to have a "p" suffix. This was used in some places and not in others, so made it standard.
* Also added a dereference check for Variant*. Helped catch a couple of bugs.
The specific `_append_xml_*` methods implement the logic that generates
the proper XML documentation for the given BBCode tag and target and
appends it to the output.
- Outputs errors for missing members or methods when generating the C#
documentation.
- Hardcodes a special case for the `_init` method, in C# we'll reference
the constructor.
- Ignores properties with slashes (since they are not declared in C# and
can't be referenced in the documentation).
Removes some unnecessary includes from `editor_node.h`, and instead add
those where they're used.
Removes unnecessary `editor_node.h` includes in various editor classes.
Renames `dynamicfont` to `dynamic_font` in a couple files.
Misc cleanup while jumping through that rabbit hole.
This makes it easier to spot syntax errors when editing the
class reference. The schema is referenced locally so validation
can still work offline.
Each class XML's schema conformance is also checked on GitHub Actions.
All iOS devices since the iPhone 5S support ARMv8 (64-bit).
The last iOS version supported on ARMv7 devices is 10.x, which is
too old to run Godot 4.0 projects since the minimum supported
iOS version is 11.0.
This fixes a conflict with the `pressed` signal.
The new name is temporary and only intended to solve the conflict for upcoming
alpha builds. Discussions are still ongoing regarding the BaseButton API and
how to rename and refactor more of its properties, signals and methods to have
a clearer API in 4.0.
When reloading C# classes and keep their properties values they are
retrieved and stored in a state list.
Retrieving the properties was only getting the fields of the C# class
and not inherited fields so those properties values were lost on reload.
Now we also try to find the field in the parent classes.
To keep consistency with GDScript, the method `Quaternion()` is renamed
`GetQuaternion()`, and made `internal` so it's not exposed to scripting.
The documentation references are also fixed.
Also, the methods `GetQuaternion()` and `GetRotationQuaternion()` are
moved below `GetEuler()` to follow alphabetic order.
Bump `Godot.NET.Sdk` to version 4.0.0-dev6.
Bump `Godot.SourceGenerators` to version 4.0.0-dev3.
Use floating version 4.0.*-* for package references in Sdk.
We prefer to prevent using chained assignment (`T a = b = c = T();`) as this
can lead to confusing code and subtle bugs.
According to https://en.wikipedia.org/wiki/Assignment_operator_(C%2B%2B), C++
allows any arbitrary return type, so this is standard compliant.
This could be re-assessed if/when we have an actual need for a behavior more
akin to that of the C++ STL, for now this PR simply changes a handful of
cases which were inconsistent with the rest of the codebase (`void` return
type was already the most common case prior to this commit).
Settings that aren't within a subsection are difficult to reach when
other settings do have a subsection.
This also adds documentation for the project setting.
Ensures that the `get_property_list` and `get_script_property_list`
methods push the script properties to the end of the given list, this
prevents the script property from appearing after the script variables.
Sets `AlignOperands` to `DontAlign`.
`clang-format` developers seem to mostly care about space-based indentation and
every other version of clang-format breaks the bad mismatch of tabs and spaces
that it seems to use for operand alignment. So it's better without, so that it
respects our two-tabs `ContinuationIndentWidth`.
Apply suggestions from code review
Merging @akien-mga's suggestion with the matching change to the CS project
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
- implement CSharpInstance::get_method_list
- loop through parent classes in CSharpInstance::get_method_list and CSharpScript::get_script_method_list (#46408)
Move multiplayer classes to "core/multiplayer" subdir.
Move the RPCConfig and enums (TransferMode, RPCMode) to a separate
file (multiplayer.h), and bind them to the global namespace.
Move the RPC handling code to its own class (RPCManager).
Renames "get_rpc_sender_id" to "get_remote_sender_id".
- Adds documentation to almost every class and member in `GodotSharp`
- Fixes some old documentation to more closely follow the XML comments convention
This commit completely removes the RPC_MODE_MASTER ("master" keyword),
and renames the RPC_MODE_PUPPET to RPC_MODE_AUTHORITY ("auth" keyword).
This commit also renames the "Node.[get|set]_network_master" methods to
"Node.[get|set]_network_authority".
This commit also renames the RPC_MODE_REMOTE constant to RPC_MODE_ANY.
RPC_MODE_MASTER in Godot 3.x meant that a given RPC would be callable by
any puppet peer on the master, while RPC_MODE_PUPPET meant that it would
be callable by the master on any puppet.
Beside proving to be very confusing to the user (referring to where it
could be called instead of who can call it) the RPC_MODE_MASTER is quite
useless. It is almost the same as RPC_MODE_REMOTE (anyone can call) with
the exception that the network master cannot. While this could be useful
to check in some case, in such a function you would anyway need to check
in code who is the caller via get_rpc_sender_id(), so adding the check
there for those rare cases does not warrants a dedicated mode.
Follow up to d9d77291bc.
Renames `String.Extension` -> `String.GetExtension()` and
`String.BaseName()` -> `String.GetBaseName()`.
This makes those methods more consistent with GDScript and with
the `GetBaseDir` method.
- Implements new `KeyValuePairs` and `KeyValuePairAt` internal calls
to get the `key` and the `value` in one call.
- Caches the `DictionaryEntry` to reuse properties without repeating
internal calls.
Use `System.Array.Empty<T>` to get an empty array instead of allocating
a new one every time. Since arrays are immutable there is no need to
allocate them every time.
- Move the "sync" property for RPCs to RPCConfig.
- Unify GDScript annotations into a single one:
- `@rpc(master)` # default
- `@rpc(puppet)`
- `@rpc(any)` # former `@remote`
- Implement three additional `@rpc` options:
- The second parameter is the "sync" option (which also calls the
function locally when RPCing). One of "sync", "nosync".
- The third parameter is the transfer mode (reliable, unreliable,
ordered).
- The third parameter is the channel (unused for now).
* Added a new macro SNAME() that constructs and caches a local stringname.
* Subsequent usages use the cached version.
* Since these use a global static variable, a second refcounter of static usages need to be kept for cleanup time.
* Replaced all theme usages by this new macro.
* Replace all signal emission usages by this new macro.
* Replace all call_deferred usages by this new macro.
This is part of ongoing work to optimize GUI and the editor.
While there are still various bugs to solve and features to implement, the C#
support as of Godot 3.4 is fairly mature and already used by a number of users
in production. Now that we default to dotnet CLI as build tool, it also seems
to be more reliable than MSBuild.
The documentation can (and does for the most part) point out some caveats that
users should be aware of, but this info dialog has outlived its intended
purpose.
* This PR adds the ability to disable classes when building.
* For now it's only possible to do this via command like:
`scons disable_classes=RayCast2D,Area3D`
* Eventually, a proper UI will be implemented to create a build config file to do this at large scale, as well as detect what is used in the project.
* The harcoded 8 slots are no more and impose limits in the new extension system.
* New system is limitless, although it will impose small performance hit with a mutex.
* Use a token to request the instance binding.
**Warning**: Mono will most likely break as a result of this, will need to be modified to use the new system.
- Fix C++ compile errors about pending variable renames after the `Reference` to `RefCount` change.
- Fix C# compile errors due to the recent rename of `EnablePlugin()` and `Build()`, which are now underscore-prefixed in bindings.
- Additional rename: `godot_icall_Reference_Dtor` to `godot_icall_RefCounted_Dtor`.
The order of numbers is not changed except for Transform2D. All logic is done inside of their structures (and not in Variant).
For the number of decimals printed, they now use String::num_real which works best with real_t, except for Color which is fixed at 4 decimals (this is a reliable number of float digits when converting from 16-bpc so it seems like a good choice)
In this PR:
- Removed rset
- rpc_config can now optionally configure transfer mode
(reliable/unreliable/ordered) and channel (channels are not actually
implemented yet.)
- Refactor how the RPC id is computed to minimize the logic in Node and
scripts that now only needs a single `get_rpc_methods` function.
* Shader compilation is now cached. Subsequent loads take less than a millisecond.
* Improved game, editor and project manager startup time.
* Editor uses .godot/shader_cache to store shaders.
* Game uses user://shader_cache
* Project manager uses $config_dir/shader_cache
* Options to tweak shader caching in project settings.
* Editor path configuration moved from EditorSettings to new class, EditorPaths, so it can be available early on (before shaders are compiled).
* Reworked ShaderCompilerRD to ensure deterministic shader code creation (else shader may change and cache will be invalidated).
* Added shader compression with SMOLV: https://github.com/aras-p/smol-v
This changes the types of a big number of variables.
General rules:
- Using `uint64_t` in general. We also considered `int64_t` but eventually
settled on keeping it unsigned, which is also closer to what one would expect
with `size_t`/`off_t`.
- We only keep `int64_t` for `seek_end` (takes a negative offset from the end)
and for the `Variant` bindings, since `Variant::INT` is `int64_t`. This means
we only need to guard against passing negative values in `core_bind.cpp`.
- Using `uint32_t` integers for concepts not needing such a huge range, like
pages, blocks, etc.
In addition:
- Improve usage of integer types in some related places; namely, `DirAccess`,
core binds.
Note:
- On Windows, `_ftelli64` reports invalid values when using 32-bit MinGW with
version < 8.0. This was an upstream bug fixed in 8.0. It breaks support for
big files on 32-bit Windows builds made with that toolchain. We might add a
workaround.
Fixes#44363.
Fixesgodotengine/godot-proposals#400.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
The current code style guidelines forbid the use of `auto`.
Some uses of `auto` are still present, such as in UWP code (which
can't be currently tested) and macros (where removing `auto` isn't
easy).
The following two bugs were fixed:
- For classes without namespace we were still generating `namespace {`
without a namespace identifier, causing a syntax error.
- For classes with nested namespaces we were generating only the innermost
part of the namespace was being generated, e.g.: for `Foo.Bar` we were
generating `namespace Bar {` instead of `namespace Foo.Bar {`.
This wasn't causing any build error, but because of the wrong namespace
Godot wasn't able to find the class associated with the script.
This source generator adds a newly introduced attribute,
`ScriptPath` to all classes that:
- Are top-level classes (not inner/nested).
- Have the `partial` modifier.
- Inherit `Godot.Object`.
- The class name matches the file name.
A build error is thrown if the generator finds a class that meets these
conditions but is not declared `partial`, unless the class is annotated
with the `DisableGodotGenerators` attribute.
We also generate an `AssemblyHasScripts` assembly attribute which Godot
uses to get all the script classes in the assembly, eliminating the need
for Godot to search them. We can also avoid searching in assemblies that
don't have this attribute. This will be good for performance in the
future once we support multiple assemblies with Godot script classes.
This is an example of what the generated code looks like:
```
using Godot;
namespace Foo {
[ScriptPathAttribute("res://Player.cs")]
// Multiple partial declarations are allowed
[ScriptPathAttribute("res://Foo/Player.cs")]
partial class Player {}
}
[assembly:AssemblyHasScripts(new System.Type[] { typeof(Foo.Player) })]
```
The new attributes replace script metadata which we were generating by
determining the namespace of script classes with a very simple parser.
This fixes several issues with the old approach related to parser
errors and conditional compilation.
It also makes the task part of the MSBuild project build, rather than
a separate step executed by the Godot editor.
-Added a new method in Resource: reset_state , used for reloading the same resource from disk
-Added a new cache mode "replace" in ResourceLoader, which reuses existing loaded sub-resources but resets their data from disk (or replaces them if they chaged type)
-Because the correct sub-resource paths are always loaded now, this fixes bugs with subresource folding or subresource ordering when saving.
- Based on C++11's `thread` and `thread_local`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed (except for the few cases of non-portable functions)
- Simpler for `NO_THREADS`
- Thread ids are now the same across platforms (main is 1; others follow)
Named color constants renamed to UPPERCASE. Unlike #41019, this PR
is complete and implements these changes in the simplest way possible.
Co-authored-by: Shivam Mukherjee <mshivam98@gmail.com>
The ClassDB tests will detect when the core API has dependencies on
the editor API, which is not allowed.
This should prevent or warn early about issues like #44856
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
This is needed with newer Mono versions, at least with Mono 6.12+
Depends on the following commit from our build scripts:
godotengine/godot-mono-builds@9d75cff174
- Avoid spaces in Mono log file names.
- Use a `.log` extension for Mono logs, just like non-Mono logs.
- Use periods to separate hours/minutes/seconds for non-Mono logs.
Godot uses Variant parameters for calls to script methods.
Up until now we were boxing such parameters when marshalling
them for invokation, even if they were value types.
Now Godot allocates the marshalled parameters on the stack,
reducing the GC allocations resulted from boxing.
Makes it let's bothersome to work with builds from our
godotengine/godot-mono-builds scripts, as they write the
BCL into an output directory separate from the runtime
(which is good as two runtimes may share the same BCL).
Multiple calls to the same `await ToSignal` were resulting in
"signal already connected to slot" error because the custom
callable comparer was wrong. Comparing only the signal awaiter
handle is the correct way (it's unique for the target).
- ClassDoc added to GDScript and property reflection data were extracted
from parse tree
- GDScript comments are collected from tokenizer for documentation and
applied to the ClassDoc by the GDScript compiler
- private docs were excluded (name with underscore prefix and doesn't
have any doc comments)
- default values (of non exported vars), arguments are extraced from the
parser
- Integrated with GDScript 2.0 and new enums were added.
- merge conflicts fixed
ptrcall is now also used to optimize calls in GDScript, on top of the existing
use by the GDNative and Mono modules.
It no longer makes sense to make it optional.
The underscore prefix was used to avoid the conflict between the `RID` class
name and the matching enum value in `Variant::Type`.
This can be fixed differently by prefixing uses of the `RID` class in `Variant`
with the scope resolution operator, as done already for `AABB`.
Returning the most contrasting color isn't a trivial task, as there
are often many possible choices. It's usually best left for the user
to implement using a script.
Main benefits:
- Projects can be built offline. Previously you needed internet
access the first time building to download the packages.
- Changes to packages like Godot.NET.Sdk can be easily tested
before publishing. This was already possible but required
too many manual steps.
- First time builds are a bit faster, as the Sdk package doesn't
need to be downloaded. In practice, the package is very small
so it makes little difference.
Bumped Godot.NET.Sdk to 4.0.0-dev3 in order to enable the
recent changes regarding '.mono/' -> '.godot/mono/'.
- Removed item list that displayed multiple build
configurations launched. Now we only display
the last build that was launched.
- Display build output next to the issues list.
Its visibility can be toggled off/on.
This build output is obtained from the MSBuild
process rather than the MSBuild logger. As such
it displays some MSBuild fatal errors that
previously couldn't be displayed.
- Added a context menu to the issues list with
the option to copy the issue text.
- Replaced the 'Build Project' button in the panel
with a popup menu with the options:
- Build Solution
- Rebuild Solution
- Clean Solution
- The bottom panel button was renamed from 'Mono'
to 'MSBuild' and now display an error/warning icon
if the last build had issues.
Removes code duplication between `CSharpScript::reload()` and `CSharpScript::initialize_for_managed_type()`.
Removes a redundant `CSharpScript::update_exports()` call in `CSharpLanguage::reload_assemblies()` as `CSharpScript::reload()` already calls it when appropriate.
Fixes missing update of RPC information in `CSharpScript::initialize_for_managed_type()`.
Because `Strings OS_OSX::get_name() const` now returns "macOS" (15a9f94346)
The C# GodotTools were still using "OSX" as identifier a few things were borken (e.g. dotnet/msbuild detection).
Enabled ARC for iOS.
Weakify/Strongify macros for objc blocks.
Removed old version checks.
Specific types for ObjC++ modules to exclude unneeded bridging.
Separate DeviceMetrics class for device specific data.
Replaced old/deprecated functionality.
When NormalizePath was called with an absolute
path (with drive letter) on Windows, it would
prepend a file path separator to the path, e.g.:
'\C:\Program Files\'.
Apparently this was still accepted as a valid
path by DotNetGlob and it stopped working when
we switched to MSBuildGlob.
MSBuild Item returns empty strings if an attribute isn't set (which
caused an IndexOutOfRangeException in NormalizePath).
We were treating Excludes incorrectly, Remove directives provide the
intended behaviour in the auto-including csproj format.
