- Based on C++11's `atomic`
- Reworked `SafeRefCount` (based on the rewrite by @hpvb)
- Replaced free atomic functions by the new `SafeNumeric<T>`
- Replaced wrong cases of `volatile bool` by the new `SafeFlag`
- Platform-specific implementations no longer needed
Co-authored-by: Hein-Pieter van Braam-Stewart <hp@tmm.cx>
-Advanced Settings toggle also hides advanced properties when disabled
-Simplified Advanced Bar (errors were just plain redundant)
-Reorganized rendering quality settings.
-Reorganized miscelaneous settings for clean up.
This change makes test_body_motion more reliable when the kinematic body
recovers from being stuck.
- When recovery occurs, the rest information is generated, in order to
make sure collision results from test_move, move_and_collide and
move_and_slide are consistent and return a collision in case of overlap.
- The new calculation for recovery vector makes sure the recovery is
never more than the overlap depth between shapes.
This can help with cases where the kinematic body overlaps with several
shapes.
Recovery is made iteratively, without forcing a full overlap at each
step. This helps with getting proper rest information when recovery
occurs.
- One Way Collision:
When attempting motion, contact direction is checked against motion
before skipping in order to solve cases where kinematic bodies can sink
into one-way collision shapes.
Rest info now sets max contact depth in order to properly handle one-way
collision.
- Low speed motion is now handled in the rest info, by never setting
min_allowed_depth lower than motion length.
Separation is always applied with full margin, otherwise contact is lost
when low speed motion occurs right after higher speed motion.
- Similar changes are applied to 3D in order to make 2D and 3D
consistent.
Cylinder contact points generation is adjusted to make it more stable
when standing on triangle meshes.
Point-Circle:
Switched to simpler plane projection as it's done for Point-Face contact
points. It solves some cases where discrepancies between the two points
caused the cylinder to jump.
Edge-Circle:
Same as before, the case for edge has just been moved from Face-Circle
to a specific method.
Face-Circle:
The previous method was clipping edges against the circle, and then
tried to add contact points when there wasn't enough support and failed
in some cases.
Now using a different algorithm which adds proper contact points around
the circle more consistently.
First, by clipping edges against circle segments using Face-Face
algorithm.
Second, by clipping edges against the circle plane.
Cylinder collision detection uses a mix of SAT and GJKEPA.
GJKEPA is used to find the best separation axis in cases where finding
it analytically is too complex.
Changes in SAT solver:
Added support for generating separation axes for cylinder shape.
Added support for generating contact points with circle feature.
Changes in GJKEPA solver:
Updated from latest Bullet version which includes EPA fixes in some
scenarios.
Setting a lower EPA_ACCURACY to fix accuracy problems with cylinder vs.
cylinder in some cases.
-Rendering server now uses a split RID allocate/initialize internally, this allows generating RIDs immediately but initialization to happen later on the proper thread (as rendering APIs generally requiere to call on the right thread).
-RenderingServerWrapMT is no more, multithreading is done in RenderingServerDefault.
-Some functions like texture or mesh creation, when renderer supports it, can register and return immediately (so no waiting for server API to flush, and saving staging and command buffer memory).
-3D physics server changed to be made multithread friendly.
-Added PhysicsServer3DWrapMT to use 3D physics server from multiple threads.
-Disablet Bullet (too much effort to make multithread friendly, this needs to be fixed eventually).
This change allows collide_shape, intersect_shape, cast_motion and
rest_info in both 2D and 3D to ignore disabled shapes and make them
consistent with the physics simulation.
In some other cases, _cull_aabb_for_body is used and filters shapes out
internally, but whenever a physics query uses the broadphase directly
without calling _cull_aabb_for_body, disabled shapes can be returned
and need to be filtered out.
Inverted the spotlight angle attenuation so a higher value results in
a dimmer light, this makes it more consistent with the distance
attenuation.
Also changed the way spotlighs are computed in SDFGI
and GIPorbes and GPU lightmapper, now it matches the falloff used in the scene rendering
code.
-Always use temporal reproject, it just loos way better than any other filter.
-By always using termporal reproject, the shadowmap reduction can be done away with, massively improving performance.
-Disadvantage of temporal reproject is update latency so..
-Made sure a gaussian filter runs in XY after fog, this allows to keep stability and lower latency.
-Added more finegrained control in RenderingDevice API
-Optimized barriers (use less ones for thee same)
-General optimizations
-Shadows render all together unbarriered
-GI can render together with shadows.
-SDFGI can render together with depth-preoass.
-General fixes
-Added GPU detection
AudioEffectCapture allows access to the microphone and other audio on an audio bus in real-time.
Co-Authored-By: K. S. Ernest (iFire) Lee <ernest.lee@chibifire.com>
Channels that are inactive -or when playback has not started yet- will report -200 dB as their peak value (which is also the lowest value possible during playback).
- Based on C++11's `thread` and `thread_local`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed (except for the few cases of non-portable functions)
- Simpler for `NO_THREADS`
- Thread ids are now the same across platforms (main is 1; others follow)
- fixes scale values of 0.0013 (det == 0.00004) not rendering, they should render even at small values, but not at zero like the editor grid plugin supplies zero exactly.
- fixes node_3d_editor_plugin visibility bug when scale is zero
- fix culling with small scaling values - which are still valid to be rendered like 0.00004
note: grid is still not fixed, it has det == 0 issues but this fixes one of them.
-Removed sync to draw, now everything syncs to draw by default.
-Fixed many validation layer errors.
-Added support for VkImageViewUsageCreateInfo to fix validation layer warnings.
-Texture, buffer, raster and compute functions now all allow spcifying which barriers will be used.
-When importing, a vertex-only version of the mesh is created.
-This version is used when rendering shadows, and improves performance by reducing bandwidth
-It's automatic, but can optionally be used by users, in case they want to make special versions of geometry for shadow casting.
-All shadow rendering is done with raster now (no compute)
-All shadow rendering is done by rendering directly to the shadow atlas
-Improved how buffer clearing is done to optimize the above.
-Ability to set shadows as 16 bits.
-SDFGI direct light is done over many frames
-SDFGI Changed settings for rays/frame
-SDFGI Misc optimizations
-SDFGI Bug fix on probe scroll
-GIProbe was not working, got it to work again
-GIProbe dynamic objects were not working, fixed
-Added a half size GI option.
For RigidBodies, uses the collision normal determined by relative motion
to determine whether or not a one-way collision has occurred.
For KinematicBodies, performs additional checks to ensure a one-way
collision has occurred, and averages the recovery step over all collision
shapes.
Co-authored-by: Sergej Gureev <sergej.gureev@relex.fi>
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
The calls to the BVH need to use the world space AABB, rather than local space for it to work. Also, update was not being called which is required to update the AABB as objects move.
Blendshapes without a skeleton already worked.
However, due to a faulty ERR_FAIL_COND, it was impossible to create a mesh with both bones and blendshapes.
This also fixes an assumption that all surfaces reference the same number of bones as surface 0.
-Much greater pairing/unpairing performance
-For now, using it for culling too, but this will change in a couple of days.
-Added a paged allocator, to efficiently alloc/free some types of objects.
Use double instead of int for the p_lod_distance_multiplier default value in
RendererSceneRenderForward::_render_shadow to match parent default value in
RendererSceneRenderRD::_render_shadow
This makes it possible to view far away objects without
having to tweak any settings. This results in a more usable
editor when working on large-scale levels.
This change should have no impact on performance, but note that
Z-fighting will be visible at a distance. This can be made less
visible by increasing the Znear value (however, doing so will cause
nearby surfaces to disappear).
This change was also applied to the editor, but it will only
apply to newly created scenes.
This also changes the default camera settings in the glTF importer
to match the Camera node's defaults.
-Happens on import by default for all models
-Just works (tm)
-Biasing can be later adjusted per node or per viewport (as well as globally)
-Disabled AABB.get_support test because its broken
Since we clone the environments to build thirdparty code, we don't get an
explicit dependency on the build objects produced by that environment.
So when we update thirdparty code, Godot code using it is not necessarily
rebuilt (I think it is for changed headers, but not for changed .c/.cpp files),
which can lead to an invalid compilation output (linking old Godot .o files
with a newer, potentially ABI breaking version of thirdparty code).
This was only seen as really problematic with bullet updates (leading to
crashes when rebuilding Godot after a bullet update without cleaning .o files),
but it's safer to fix it everywhere, even if it's a LOT of hacky boilerplate.
We haven't had a proper implementation for COMPRESS_PVRTC2 (which is PVRTC1 2-bpp) in years,
so let's drop it instead of keeping a compress type which doesn't work.
The other enum values were renamed to clarify that our PVRTC2 and PVRTC4 are respectively
PVRTC1 2-bpp and PVRTC1 4-bpp. PVRTC2 2-bpp and 4-bpp are not implemented yet.
And fixups:
- Add missing bindings in RenderingServer
- Remove duplicate ArrayMesh enum bindings (they're in Mesh already)
- Remove redundant _unhandled_key_input binding in Control (it's in Node
already)
-Changed how mesh data is organized, hoping to make it more efficient on Vulkan and GLES.
-Removed compression, it now always uses the most efficient format.
-Added support for custom arrays (up to 8 custom formats)
-Added support for 8 weights in skeleton data.
-Added a simple optional versioning system for imported assets, to reimport if binary is newer
-Fixes #43979 (I needed to test)
WARNING:
-NOT backwards compatible with previous 4.x-devel, will most likely never be, but it will force reimport scenes due to version change.
-NOT backwards compatible with 3.x scenes, this will be eventually re-added.
-Skeletons not working any longer, will fix in next PR.
Allow gradients and 2d images.
Use shader versions for LUT in tonemap
Co-authored-by: alex-poe <3957610+CptPotato@users.noreply.github.com>
Co-authored-by: QbieShay <cislaghi.ilaria@gmail.com>
Co-authored-by: Clay John <claynjohn@gmail.com>
- Fixes Godot physics failing when the cast Shape is inside of, or
already colliding with another Shape.
- Fixes Bullet physics failing when there is no motion.
- Ensures Godot and Bullet physics behave the same.
- Updates the documentation to exclude the caveats for the failures and
differences.
The underscore prefix was used to avoid the conflict between the `RID` class
name and the matching enum value in `Variant::Type`.
This can be fixed differently by prefixing uses of the `RID` class in `Variant`
with the scope resolution operator, as done already for `AABB`.
Also separated Light2D in PointLight2D and DirectionalLight2D.
Used PointLight2D because its more of a point, and it does not work
the same as OmniLight (as shape depends on texture).
Added a few utility methods to Rect2D I needed.
-Allows merging several 2D objects into a single draw operation
-Use current node to clip children nodes
-Further fixes to Vulkan barriers
-Changed font texture generation to white, fixes dark eges when blurred
-Other small misc fixes to backbuffer code.
-Removed normal/specular properties from nodes
-Create CanvasTexture, which can contain normal/specular channels
-Refactored, optimized and simplified 2D shaders
-Use atlas for light textures.
-Use a shadow atlas for shadow textures.
-Use both items aboves to make light rendering stateless (faster).
-Reorganized uniform sets for more efficiency.
Keeps track of the order in which items are collected by
_collect_ysort_children, and uses that order to break
ties between items with similar Y positions.
The thread model option for physics (2D) and rendering (single-unsafe,
single-safe, multithread), was causing crashes/locks when set as
multithreaded and exported for a platform that does not support threads
(namely HTML5).
This commit ensures that when threads support is not available, that
option is ignored, and the equivalent of "single-unsafe" is always used
instead.
It can be enabled in the Project Settings
(`rendering/quality/screen_filters/use_debanding`). It's disabled
by default as it has a small performance impact and can make
PNG screenshots much larger (due to how dithering works).
It will also slightly brighten the scene's dark areas.
As a result, it should be enabled only when banding is noticeable enough.
This closes#17006.
Depending on the device implementation, editor actions could be
received with different action ids or not at all for multi-line.
Added a parameter to virtual keyboards to properly handle single-line
and multi-line cases in all situations.
Single-line:
Input type set to text without multiline to make sure actions are sent.
IME options are set to DONE action to force action id consistency.
Multi-line:
Input type set to text and multiline to make sure enter triggers new lines.
Actions are disabled by the multiline flag, so '\n' characters are
handled in text changed callbacks.
When creating a window, Godot would first register it to the WM(show it) and then set its flags.
This works fine on a floating WM, but on tiling WMs as soon as a window gets registered
the WM immediately acts on the window by scaling it up and treating it as a generic window,
being registered without any special flags.
This commit separates the showing of the window into another function and calls it after the most important flags are set,
making windows with special flags(eg. all popups) work again on tiling WMs.
Fixes#37930
