This prevents the project setting from being located directly within
a root category, which is confusing from an UX perspective in the
project settings editor.
Control-nodes without a shortcut-context were missing a check if
the event was handled, so that a single shortcut-event was passed to
multiple Control-nodes.
Non-exhaustive list of case-sensitive renames:
GDExtension -> GDNative
GDNATIVE -> GDEXTENSION
gdextension -> gdnative
ExtensionExtension ->Extension (for where there was GDNativeExtension)
EXTENSION_EXTENSION ->EXTENSION (for where there was GDNATIVE_EXTENSION)
gdnlib -> gdextension
gdn_interface -> gde_interface
gdni -> gde_interface
fixes#68197
when NOTIFICATION_WM_WINDOW_FOCUS_OUT is recieved by a viewport it will now call
_gui_cancel_tooltip() to avoid it hanging around after the mouse events stop
coming in
Decompress each body chunk over multiple iterations, this causes more
reallocations, but it ensures decompression will not fail no matter the
compression ratio.
This patch implements the functionality to cancel Drag and Drop
by using the escape key or more general, the ui_cancel action.
Since this would be the third location, where the finalization of
Drag and Drop would have to be implemented, that functionality was
put into the private function _perform_drop.
Simplified gui.drag_data.get_type() != Variant::NIL to gui.dragging
because they are equivalent.
A SubViewport with default-size doesn't display its content, but shows
pink color, until it is resized.
This patch makes sure, that the size gets set during initialization.
When resizing a non-focused window, the previously focused
Window got resized.
This patch grabs focus for the actually resized window, before
starting with the resizing.
Fix for 3D-physics processing:
- with enabled input_capture_on_drag now report correct position and
normals in _input_event
- mouse_enter and mouse_exit signals are emitted when the mouse cursor
leaves the visible area of the 3D-object, independently of pressed mouse
button or input_capture_on_drag
- make sure that collision input events are sent in the right order with
respect to mouse_enter and mouse_exit signals
MultiplayerPeer changes:
- Adds is_server_relay_supported virtual method
Informs the upper MultiplayerAPI layer if it can signal peers connected
to the server to other clients, and perform packet relaying among them.
- Adds get_packet_channel and get_packet_mode virtual methods
Allows the MultiplayerAPI to retrieve the channel and transfer modes to
use when relaying the last received packet.
SceneMultiplayerPeer changes:
- Implement peer signaling and packet relaying when the MultiplayerPeer
advertise they are supported.
ENet, WebRTC, WebSocket changes:
- Removed custom code for relaying from WebSocket and ENet, and let it
be handled by the upper layer.
- Update WebRTC to split create_client, create_server, and create_mesh,
with the latter behaving like the old initialize with
"server_compatibility = false", and the first two supporting the upper
layer relaying protocol.
Nodes may have been deleted by shortcuts. For example, when switching
scenes with `Ctrl` + `Tab` / `Ctrl` + `Shift` + `Tab`, some controls
will be deleted and recreated.
In certain conditions events did not get propagated to Control childs of
Node2D nodes when setting a parent of the Node2D to toplevel.
This patch makes sure that such Control nodes become root control in the
viewport.
When the mouse cursor is over a embedded Window, the Viewport's
last_mouse_position did not get updated.
This patch makes sure that the update happens on every InputEventMouse.
Document canvas layer of embedded Windows.
- `LIBC_FILEIO_ENABLED` wasn't defined anywhere, even in _other platforms_.
- `NO_NETWORK` is also never defined. It probably isn't enough anyway to
disable network APIs in the current codebase.
- `UNIX_SOCKET_UNAVAILABLE` is never defined in this code but used by some
other platforms, clarify that.
- `NO_STATVFS` can be removed as Android supports it since API level 19,
which is our current min SDK level. It's also only used for
`DirAccessUnix::get_space_left()` which is anyway overridden by
`DirAccessJAndroid::get_space_left()` so it shouldn't make a difference.
* Fixed documentation for `DirAccess.get_space_left()`.
- `NO_FCNTL` is likely also a remnant of early Android days, in current NDK
r23 it seems to be available. Also cleaned up unused `fcntl.h` includes.
- `NO_ALLOCA` is never defined, and we use alloca in many places now.
Before this change, the SceneTree had methods named “change_scene” and
“change_scene_to”. One of them accepted a String as a parameter and the
other accepted a PackedScene, but you couldn’t tell which one was which
just by looking at their names.
This change renames those two methods to “change_scene_to_file” and
“change_scene_to_packed”. These new names came from this suggestion [1].
These new names make the difference between the two methods more clear
and hint at the fact that there’s more than one change_scene method.
[1]: <https://github.com/godotengine/godot/issues/27640#issuecomment-1081870955>
Fixes#27640.
With the introduction of Scene Unique Nodes, `is_unique_in_owner`, "Unique Name in Scene" and other descriptions related to the feature, the second parameter of add_child() and add_simbling() could be misunderstood to be related, at first glance.
"less" should be used for quantity, rather than "lesser".
Existing scripts that use `or_lesser` in `_get_property_list()`
will need to be updated to account for this change.
This allows light sources to be specified in physical light units in addition to the regular energy multiplier. In order to avoid loss of precision at high values, brightness values are premultiplied by an exposure normalization value.
In support of Physical Light Units this PR also renames CameraEffects to CameraAttributes.
Affects a lot of classes. Very thoroughly checked signal connections and deferred calls to this method, add_do_method/add_undo_method calls, and so on.
Also renames the internal `_update_callback()` to `_redraw_callback()` for consistency.
Just a few comments have also been changed to say "redraw".
In CPUParticles2D, there was a private variable with the same name. It has been renamed to `do_redraw`.
This reverts commit 4b817a565c.
Fixes#64988.
Fixes#64997.
This caused several regressions (#64988, #64997,
https://github.com/godotengine/godot/issues/64997#issuecomment-1229970605)
which point at a flaw in the current logic:
- `Control::NOTIFICATION_ENTER_TREE` triggers a *deferred* notification with
`NOTIFCATION_THEME_CHANGED` as introduced in #62845.
- Some classes use their `THEME_CHANGED` to cache theme items in
member variables (e.g. `style_normal`, etc.), and use those member
variables in `ENTER_TREE`, `READY`, `DRAW`, etc. Since the `THEME_CHANGE`
notification is now deferred, they end up accessing invalid state and this
can lead to not applying theme properly (e.g. for EditorHelp) or crashing
(e.g. for EditorLog or CodeEdit).
So we need to go back to the drawing board and see if `THEME_CHANGED` can be
called earlier so that the previous logic still works?
Or can we refactor all engine code to make sure that:
- `ENTER_TREE` and similar do not depend on theme properties cached in member
variables.
- Or `THEME_CHANGE` does trigger a general UI update to make sure that any
bad theme handling in `ENTER_TREE` and co. gets fixed when `THEME_CHANGE`
does arrive for the first time. But that means having a temporary invalid
(and possibly still crashing) state, and doing some computations twice
which might be heavy (e.g. `EditorHelp::_update_doc()`).
The bit mask used for the type when compressing variants in the
Multiplayer API became too small to represent all variant types.
This commit expand the mask, which means we no longer have an extra bit
in the "meta" byte we use to store encoding information.
The extra bit was only used in case of booleans to store the value and
since booleans do not require extra encoding information we use those 2
bits to store the value instead.
Mipmap LOD bias can be useful to improve the appearance of distant
textures without increasing anisotropic filtering (or in situations
where anisotropic filtering is not effective).
`fsr_mipmap_bias` was renamed to `texture_mipmap_bias` accordingly.
The property hint now allows for greater precision as well.
- RPC configurations are now dictionaries.
- Script.get_rpc_methods renamed to Script.get_rpc_config.
- Node.rpc[_id] and Callable.rpc now return an Error.
- Refactor MultiplayerAPI to allow extension.
- New MultiplayerAPI.rpc method with Array argument (for scripts).
- Move the default MultiplayerAPI implementation to a module.
Implement built-in classes Vector4, Vector4i and Projection.
* Two versions of Vector4 (float and integer).
* A Projection class, which is a 4x4 matrix specialized in projection types.
These types have been requested for a long time, but given they were very corner case they were not added before.
Because in Godot 4, reimplementing parts of the rendering engine is now possible, access to these types (heavily used by the rendering code) becomes a necessity.
**Q**: Why Projection and not Matrix4?
**A**: Godot does not use Matrix2, Matrix3, Matrix4x3, etc. naming convention because, within the engine, these types always have a *purpose*. As such, Godot names them: Transform2D, Transform3D or Basis. In this case, this 4x4 matrix is _always_ used as a _Projection_, hence the naming.
`rendering/quality/shadows` is now `rendering/quality/positional_shadow`
to explicitly denote that the settings only affect positional light shadows,
not directional light shadows.
Shadow atlas settings now contain the word "atlas" for easier searching.
Soft shadow quality settings were renamed to contain the word "filter".
This makes the settings appear when searching for "filter" in the
project settings dialog, like in Godot 3.x.
The name was confusing as this signal is emitted around the same time as
`tree_exiting` and `NOTIFICATION_EXIT_TREE`, i.e. while the child node is
still in tree.
Fixes#59210.
Fix single-window mode popup not closing when OptionBox is clicked.
Fix single-window mode submenus closing when parent menu item, that was used to open it is clicked (using same safe-area logic as platform specific code).
Disallow windows that are part of an edited scene from being set as exclusive or popup to prevent it from locking up the editor.
Initial TAA support based on the implementation in Spartan Engine.
Motion vectors are correctly generated for camera and mesh movement, but there is no support for other things like particles or skeleton deformations.
* Map is unnecessary and inefficient in almost every case.
* Replaced by the new HashMap.
* Renamed Map to RBMap and Set to RBSet for cases that still make sense
(order matters) but use is discouraged.
There were very few cases where replacing by HashMap was undesired because
keeping the key order was intended.
I tried to keep those (as RBMap) as much as possible, but might have missed
some. Review appreciated!
Adds a new, cleaned up, HashMap implementation.
* Uses Robin Hood Hashing (https://en.wikipedia.org/wiki/Hash_table#Robin_Hood_hashing).
* Keeps elements in a double linked list for simpler, ordered, iteration.
* Allows keeping iterators for later use in removal (Unlike Map<>, it does not do much
for performance vs keeping the key, but helps replace old code).
* Uses a more modern C++ iterator API, deprecates the old one.
* Supports custom allocator (in case there is a wish to use a paged one).
This class aims to unify all the associative template usage and replace it by this one:
* Map<> (whereas key order does not matter, which is 99% of cases)
* HashMap<>
* OrderedHashMap<>
* OAHashMap<>
Implemented by request of @neikeq to advance in the GDExtension version of Mono.
* If a Resource type is missing upon load, it will be remembered together with its data (Unless manually overriden).
* If a Node type is missing upon load, it will be also be remembered together with its data (unless deleted).
This feature makes working with GDExtension much easier, as it ensures that missing types no longer cause data loss.
These typedefs don't save much typing compared to the full `Ref<Resource>`
and `Ref<RefCounted>`, yet they sometimes introduce confusion among
new contributors.
Didn't commit all the changes where it wants to initialize a struct
with `{}`. Should be reviewed in a separate PR.
Option `IgnoreArrays` enabled for now to be conservative, can be
disabled to see if it proposes more useful changes.
Also fixed manually a handful of other missing initializations / moved
some from constructors.
Removes custom_multiplayer from Node.
MultiplayerAPI overrides are now set at SceneTree level, and apply to
whole branches.
Impact on performance when using only the default multiplayer or
overriding it is minimal, the use of branches can likely be further
optimized by caching nodes and relevant MultiplayerAPI IDs.
The new name contrasts it better with `find_parent`, and makes it clear
that it only matches child/descendant nodes.
Also rename `find_nodes` to `find_children` accordingly.
Implements https://github.com/godotengine/godot-proposals/issues/4096
* Nodes can be marked unique to the scene in the editor (or via code).
* Unique nodes can be accessed via the **%** prefix at any point in the path. From that point in the path (depending on whether the scene of the path is), the unique node will be fetched.
* Implementation is very optimal, as these nodes are cached.
Type emit_signal exposed method return type
set UndoRedo add_do_method and add_undo_method exposed return void
Set TreeItem::_call_recursive_bind returns void
Set _rpc_bind and _rpc_id_bind returns void in Node
Set _call_group and _call_group_flags method returns void in SceneTree
Set godot-cpp-test CI flag to false
We might want to re-add something like this if/when we find a good use case
for it and do the effort to categorize all objects in the API properly.
Until then, it's better to remove that boilerplate since it's not needed.
Closes#18711.
* Very old macros from the time Godot was created.
* Limited arguments to 5 (then later changed to 8) in many places.
* They were replaced by C++11 Variadic Templates.
* Renamed methods that take argument pointers to have a "p" suffix. This was used in some places and not in others, so made it standard.
* Also added a dereference check for Variant*. Helped catch a couple of bugs.
Changed 'find_node' to 'find_nodes' which now returns an 'TypedArray<Node>', as well as Added a 'type' parameter to match against specific node types, which supports inheritance.
Now uses two interfaces so it can be overridden in the future, and
core no longer depends on Node.
The interfaces are implements in scene/multiplayer.
Replaces root_node with root_path.
Remove all Node references from MultiplayerAPI.
Initial implementation of the MultiplayerReplicationInterface and its
default implementation (SceneReplicationInterface).
New MultiplayerSpawner node helps dealing with instantiation of scenes
on remote peers (e.g. clients).
It supports both custom spawns via a `_spawn_custom` virtual function,
and optional auto-spawn of known scenes via a TypedArray<PackedScenes>
property.
New MultiplayerSynchornizer helps synchronizing states between the local
and remote peers, supports both sync and spawn properties and is
configured via a `SceneReplicationConfig` resource.
It can also sync via path (i.e. without being spawned by a
MultiplayerSpawner if both peers has it in tree, but will not send the
spawn state in that case, only the sync one.
-Allows more fine grained notifications (hence better performance) than using the global scene tree signals (node added and removed).
-Required for #55950
A common source of errors is to call functions (such as round()) expecting them to work in place, but them actually being designed only to return the processed value. Not using the return value in this case in indicative of a bug, and can be flagged as a warning by using the [[nodiscard]] attribute.
[macOS] Fix transient windows not working in the full-screen mode.
[macOS] Fix moving transient windows to the other screen than parent window.
[macOS] Fix popup menu switch on hover.
[macOS] Use content origin rect for windows position (to ensure `DS.mouse_get_position` is equal to `DS.window_get_position` + mouse position from the input events).
[macOS] Fix incorrect input coordinates, when external display with different scaling in connected/disconnected.
[macOS/Windows] Fix moving fullscreen windows between the screens.
Add auto refocusing of the parent window, when the focused transient window is closed.
Remove redundant `DS.mouse_get_absolute_position` function (returns mouse position in the screen coordinates, same as `DS.mouse_get_position`).
* Adds proxy support for `HTTPRequest`.
* Adds `network/http_proxy/{host,port}` editor settings.
* Labeled as "HTTP Proxy" and it will be used for both HTTP and
HTTPS requests. This is the same convention as seen in Android
Studio's proxy settings.
* Makes Asset Library and Export Template Manager use proxy according to
the editor settings.
- Regarding preservation of owner, `free()` and `remove_child()` now behave the same: owner is kept during `tree_exiting` signal and `null` during `tree_exited`.
- `tree_exited` is emitted in the same order as `tree_exiting`.
- Superfluous code to handle cancelation of ownership is removed.
Physics internal process was removed by mistake, it's needed for contact
points to be updated each frame.
Fixed some multimesh parameters to allow 3D contact points to be drawn,
although it's still not working well in 3D as only some of the contact
points are drawn, and some of them keep being drawn when the number
of visible instances drops to 0 instead of hiding them all.
Same as what is already done for shape queries, applied to point and ray
queries. Easier to document and more flexible to add more parameters.
Also expose intersect_point method to script in 3D.
Remove intersect_point_on_canvas in 2D, replaced with a parameter.
having the raycast distance hardcoded to `10000` caused input events
to not be registered in very large 3D scenes.
This resolves the issue by using the cameras far distance instead.
Creating the more predictable behavior of if an object is visible,
it will be picked by the viewport.
resolves: #49735
Sets `AlignOperands` to `DontAlign`.
`clang-format` developers seem to mostly care about space-based indentation and
every other version of clang-format breaks the bad mismatch of tabs and spaces
that it seems to use for operand alignment. So it's better without, so that it
respects our two-tabs `ContinuationIndentWidth`.
* Changed another instance of ERR_FAIL_COND in the same file to
ERR_FAIL_NULL_MSG instead.
* Checked for potential access of the viewport pointer elsewhere in same
file.
Fixes#54098
Very low wait times behave in unpredictable ways depending on the
rendered frame rate. This is because the timeout signal is only emitted
once per rendered frame (or physics frame, depending on the timer's
process mode).
This allows for finer control over 3D rendering resolution.
Supersampling can also be performed by setting a 3D rendering
resolution above 1.0, which is useful for offline rendering or
for very high-end GPUs.
`core` and `scene` shouldn't depend on `editor`, so they can't query this style
setting in `get_argument_options`. But we can handle it after the fact in
GDScript's completion code.
Also cleans up a couple extra unused invalid includes in `core`.
Removes _networking_ prefix from some methods and members, now that multiplayer has been largely moved out of Node and SceneTree and is seperated into its own set of classes.
Move multiplayer classes to "core/multiplayer" subdir.
Move the RPCConfig and enums (TransferMode, RPCMode) to a separate
file (multiplayer.h), and bind them to the global namespace.
Move the RPC handling code to its own class (RPCManager).
Renames "get_rpc_sender_id" to "get_remote_sender_id".
Prevent the root node to be set to PROCESS_MODE_INHERIT, since it causes
undefined behavior.
Fix a case where the process owner node is wrongly set to the direct
parent instead of the proper node.
Add errors for all unhandled cases.
This commit completely removes the RPC_MODE_MASTER ("master" keyword),
and renames the RPC_MODE_PUPPET to RPC_MODE_AUTHORITY ("auth" keyword).
This commit also renames the "Node.[get|set]_network_master" methods to
"Node.[get|set]_network_authority".
This commit also renames the RPC_MODE_REMOTE constant to RPC_MODE_ANY.
RPC_MODE_MASTER in Godot 3.x meant that a given RPC would be callable by
any puppet peer on the master, while RPC_MODE_PUPPET meant that it would
be callable by the master on any puppet.
Beside proving to be very confusing to the user (referring to where it
could be called instead of who can call it) the RPC_MODE_MASTER is quite
useless. It is almost the same as RPC_MODE_REMOTE (anyone can call) with
the exception that the network master cannot. While this could be useful
to check in some case, in such a function you would anyway need to check
in code who is the caller via get_rpc_sender_id(), so adding the check
there for those rare cases does not warrants a dedicated mode.
In the `master` branch, 16× MSAA caused the entire system to freeze
on NVIDIA GPUs. This is likely caused by graphics drivers not actually
implementing 16× MSAA, but combining 8× MSAA with 2× SSAA instead.
On top of that, modern shader complexity makes 16× MSAA very difficult
to use while keeping a good framerate. 8× MSAA is hard enough to use
as it is.
* `_gui_input`, `_input`, `_unhandled_input` and `_unhandled_key_input` are now regular C++ virutal functions.
* Everything else converted to GDVIRTUAL
* BIND_VMETHOD is gone, always use the new syntax from now on.
Creating `_gui_input` method and using the binder to register events will no longer work, simply override the virtual function now.
* New syntax is type safe.
* New syntax allows for type safe virtuals in native extensions.
* New syntax permits extremely fast calling.
Note: Everything was replaced where possible except for `_gui_input` `_input` and `_unhandled_input`.
These will require API rework on a separate PR as they work different than the rest of the functions.
Added a new method flag METHOD_FLAG_OBJECT_CORE, used internally. Allows to not dump the core virtuals like `_notification` to the json API, since each language will implement those as it is best fits.
Move the former "spawnables" functions to a dedicated
MultiplayerReplicator class.
Support custom overrides in replicator.
Spawn/despawn messages can now contain a state.
The state can be automatically encoded/decoded by passing the desired
object properties to `spawnable_config`.
You can use script properties to optimize the state representation.
2 Callables can be also specified to completely override the default
implementation for sending and receiving the spawn/despawn event.
(9 bytes overhead, and there's room for improvement here).
When using a custom implementation `spawn` and `despawn` can be called
with any Object, `send_spawn`/`send_despawn` can receive any Variant as
a state, and the path is not required.
Two new functions, `spawn` and `despawn`, convey the implementation
independent method for requesting a spawn/despawn of an Object, while
`send_spawn` and `send_despawn` represent the more low-level send event
for a Variant to be used by the custom implementations.
`PackedScene`s can be configured to be spawnable via a new
`MultiplayerAPI.spawnable_config` method.
They can be configured either to be spawned automatically when coming
from the server or to always require verification.
Another method, `MultiplayerAPI.send_spawn` lets you request a spawn on
the remote peers.
When a peer receive a spawn request:
- If it comes from the server and the scene is configured as
`SPAWN_MODE_SERVER`:
- Spawn the scene (instantiate it, add it to tree).
- Emit signal `network_spawn`.
- Else:
- Emit signal `network_spawn_request`.
In a similar way, `despawn`s are handled automatically in
`SPAWN_MODE_SERVER`.
In `SPAWN_MODE_SERVER`, when a new client connects it will also receive,
from the server all the spawned (and not yet despawned) instances.
The `Math_INF` and `Math_NAN` defines were just aliases for those
constants, so we might as well use them directly.
Some portions of the code were already using `INFINITY` directly.
* Added explicit return type to the SNAME macro.
* Add some extra SNAME usages.
* Change some ClassDB methods to use const StringName & arguments.
* Cache the Window parent in Control because it's used in
is_layout_rtl(), which is called often.
* Only enable internal processing for viewports that need it.
* Change CanvasItem::group to be a StringName because it's only used as
that.
* Added a new macro SNAME() that constructs and caches a local stringname.
* Subsequent usages use the cached version.
* Since these use a global static variable, a second refcounter of static usages need to be kept for cleanup time.
* Replaced all theme usages by this new macro.
* Replace all signal emission usages by this new macro.
* Replace all call_deferred usages by this new macro.
This is part of ongoing work to optimize GUI and the editor.
Previously, only StandardMaterial3D could be defined as an alternative
to ShaderMaterial.
This also reorders the CanvasItemMaterial property hints to follow
alphabetical order (which is enforced by the inspector).
* there is now a more clear distinction between camera_2d and camera_3d functions in the engine code
* simplified camera2d's exported interface - now everything happens directly with the 'current' variable and make_current and clear_current are no longer exposed- there were some situations where calling one instead of set_current would result in incomplete results
* rebased to current godot master
* Fixed and redone the process to obtain render information from a viewport
* Some stats, such as material changes are too difficult to guess on Vulkan, were removed.
* Separated visible and shadow stats, which causes confusion.
* Texture, buffer and general video memory can be queried now.
* Fixed the performance metrics too.
New property disable_mode to set different behaviors:
Remove: remove from physics simulation
MakeStatic: change body mode to static (doesn't affect area and soft body)
KeepActive: do nothing
Extra change:
Handle disable/enable node state with specific notifications, in order
to differentiate global pause from disabled nodes.
* Functions to convert to/from degrees are all gone. Conversion is done by the editor.
* Use PROPERTY_HINT_ANGLE instead of PROPERTY_HINT_RANGE to edit radian angles in degrees.
* Added possibility to add suffixes to range properties, use "min,max[,step][,suffix:<something>]" example "0,100,1,suffix:m"
* In general, can add suffixes for EditorSpinSlider
Not covered by this PR, will have to be addressed by future ones:
* Ability to switch radians/degrees in the inspector for angle properties (if actually wanted).
* Animations previously made will most likely break, need to add a way to make old ones compatible.
* Only added a "px" suffix to 2D position and a "m" one to 3D position, someone needs to go through the rest of the engine and add all remaining suffixes.
* Likely also need to track down usage of EditorSpinSlider outside properties to add suffixes to it too.
* Editor 2D viewport now uses embedded subwindows (windows no longer pop up)
* Restored the ability to disable 3D on the 2D viewport (makes 3D not display on 2D when there is a camera on the scene)
* Tweens were changed from Node to RefCounted. New API is inspired by DOTween.
* Tweens are created and managed by SceneTree, similar to SceneTreeTimer, which makes them ultra cheap to use a lot.
* Animating with Tweens is done by creating sequences of Tweeners. You create them from code and they autostart by default (fire-and-forget).
* There are 4 Tweeners that cover the former Tween functionality: PropertyTweener, IntervalTweener, CallbackTweener and MethodTweener.
* The methods were simplified a lot. Long argument lists are replaced with chained calls on Tweens and Tweeners.
* Tweeners by default execute in sequence, so it's easy to create complex chained animations.
* You can bind a Tween to a node. Tween will be removed automatically when the bound node is freed.
* Added a function to ignore subsequent commands if they don't fall within the slice.
* This will be used by the new TileMap to properly provide animated tiles.
* This is the 3D counterpart to #49632
* Implemented a bit different as 3D works using instancing
After merged, both 2D and 3D classes will most likely be renamed in a separate PR to DisplayNotifier2D/3D.
* Works from RenderinServer
* Accurately tells when on or off-scren, its no longer approximate.
* VisibilityEnabler also simplified to use the process mode instead.
This PR and commit adds a new IK system for 2D with the Skeleton2D node
that adds several new IK solvers, a way to control bones in a Skeleton2D
node similar to that in Skeleton3D. It also adds additional changes
and functionality.
This work was sponsored by GSoC 2020 and TwistedTwigleg.
Full list of changes:
* Adds a SkeletonModifier2D resource
* This resource is the base where all IK code is written and executed
* Has a function for clamping angles, since it is so commonly used
* Modifiers are unique when duplicated so it works with instancing
* Adds a SkeletonModifierStack2D resource
* This resource manages a series of SkeletonModification2Ds
* This is what the Skeleton2D directly interfaces with to make IK possible
* Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK
* Each modification is in its own file
* There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together
* Adds a PhysicalBone2D node
* Works similar to the PhysicalBone3D node, but uses a RigidBody2D node
* Changes to Skeleton2D listed below:
* Skeleton2D now holds a single SkeletonModificationStack2D for IK
* Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D
* Changes to Bone2D listed below:
* The default_length property has been changed to length. Length is the length of the bone to its child bone node
* New bone_angle property, which is the angle the bone has to its first child bone node
* Bone2D caches its transform when not modified by IK for IK interpolation purposes
* Bone2D draws its own editor gizmo, though this is stated to change in the future
* Changes to CanvasItemEditor listed below:
* Bone2D gizmo drawing code removed
* The 2D IK code is removed. Now Bone2D is the only bone system for 2D
* Transform2D now has a looking_at function for rotating to face a position
* Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE
* These notifications only are called in the editor right before and after saving a scene
* Needed for not saving the IK position when executing IK in the editor
* Documentation for all the changes listed above.
* GIProbe is now VoxelGI
* BakedLightmap is now LightmapGI
As godot adds more ways to provide GI (as an example, SDFGI in 4.0), the different techniques (which have different pros/cons) need to be properly named to avoid confusion.
In this PR:
- Removed rset
- rpc_config can now optionally configure transfer mode
(reliable/unreliable/ordered) and channel (channels are not actually
implemented yet.)
- Refactor how the RPC id is computed to minimize the logic in Node and
scripts that now only needs a single `get_rpc_methods` function.
The "Anisotropic" term is abbreviated as spelling it out would cause
the PopupMenu to overflow the editor window when using the default
inspector width.
We've been using standard C library functions `memcpy`/`memset` for these since
2016 with 67f65f6639.
There was still the possibility for third-party platform ports to override the
definitions with a custom header, but this doesn't seem useful anymore.
Splits the URL into (scheme, host, port, path).
Supports both literal IPv4 and IPv6.
Strip credentials when present (e.g. http://user:pass@example.com/).
Use that function in both HTTPRequest and WebSocketClient.
Added an occlusion culling system with support for static occluder meshes.
It can be enabled via `Project Settings > Rendering > Occlusion Culling > Use Occlusion Culling`.
Occluders are defined via the new `Occluder3D` resource and instanced using the new
`OccluderInstance3D` node. The occluders can also be automatically baked from a
scene using the built-in editor plugin.
* Added option for importers to show an Advanced settings dialog
* Created advanced settings dialog for Scene Importer
* Cleaned up importers (remove many old/unused options)
* Added the ability to customize every node, material, mesh and animation individually
* Saving to animations and meshes to files is now a manual process, making it more predictable
* Added the ability for materials to be replaced by external files (or to be made external, up to you).
* When doubleclicking an impoted scene in the filesystem dock, it automatically shows the import settings instead of asking to open it.
WARNING: Lightmap UV unwrap is not working, it needs to be re-made.
This fix request_completed being emitted two times, the first with the
result, the second as a failure when retrieving responses served with
read-until-EOF.
* Adds both a preview sun and preview environment to the 3D editor.
* They are valid as long as a DirectionalLight3D and WorldEnvironment are not in the scene.
* If any is added to the scene, the respective preview is disabled.
* Changed WorldEnvironment to better handle multiple node versions.
* Added a function in SceneTree to get the first node in a group.
* Fixed button minimum size to also consider font height if no text is there, this broke with the TextSever PR.
This makes them easier to distinguish, especially when used
in a TileMap.
The default color's opacity has been slightly decreased to account
for the new outline.
Renamed to ActionMapEditor as it is more generic and can be used for more than just the InputMapEditor if required.
This also includes a new Event Configuration dialog (previously "Press A key...") which can be used to create and edit InputEvents for any use - like the Project Settings input map, or the Editor Settings shortcuts.
Implements https://github.com/godotengine/godot-proposals/issues/1835#issuecomment-727186192
* PauseMode is now ProcessMode, containing the following states:
```
PROCESS_MODE_INHERIT, // same as parent node
PROCESS_MODE_NORMAL, // process only if not paused
PROCESS_MODE_PAUSE_ONLY, // process only if paused
PROCESS_MODE_ALWAYS, // process always
PROCESS_MODE_DISABLED, // never process
```
* NOTIFICATION_PAUSED and NOTIFICATION_UNPAUSED are received effectively when the node is paused and unpaused (not any longer when pause mode is set in SceneTree).
* Renamed some nodes that used ProcessMode/process_mode to specify a callback type to ProcessCallback to avoid clashes.
