This PR and commit adds a new IK system for 2D with the Skeleton2D node
that adds several new IK solvers, a way to control bones in a Skeleton2D
node similar to that in Skeleton3D. It also adds additional changes
and functionality.
This work was sponsored by GSoC 2020 and TwistedTwigleg.
Full list of changes:
* Adds a SkeletonModifier2D resource
* This resource is the base where all IK code is written and executed
* Has a function for clamping angles, since it is so commonly used
* Modifiers are unique when duplicated so it works with instancing
* Adds a SkeletonModifierStack2D resource
* This resource manages a series of SkeletonModification2Ds
* This is what the Skeleton2D directly interfaces with to make IK possible
* Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK
* Each modification is in its own file
* There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together
* Adds a PhysicalBone2D node
* Works similar to the PhysicalBone3D node, but uses a RigidBody2D node
* Changes to Skeleton2D listed below:
* Skeleton2D now holds a single SkeletonModificationStack2D for IK
* Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D
* Changes to Bone2D listed below:
* The default_length property has been changed to length. Length is the length of the bone to its child bone node
* New bone_angle property, which is the angle the bone has to its first child bone node
* Bone2D caches its transform when not modified by IK for IK interpolation purposes
* Bone2D draws its own editor gizmo, though this is stated to change in the future
* Changes to CanvasItemEditor listed below:
* Bone2D gizmo drawing code removed
* The 2D IK code is removed. Now Bone2D is the only bone system for 2D
* Transform2D now has a looking_at function for rotating to face a position
* Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE
* These notifications only are called in the editor right before and after saving a scene
* Needed for not saving the IK position when executing IK in the editor
* Documentation for all the changes listed above.
* GIProbe is now VoxelGI
* BakedLightmap is now LightmapGI
As godot adds more ways to provide GI (as an example, SDFGI in 4.0), the different techniques (which have different pros/cons) need to be properly named to avoid confusion.
* Shader compilation is now cached. Subsequent loads take less than a millisecond.
* Improved game, editor and project manager startup time.
* Editor uses .godot/shader_cache to store shaders.
* Game uses user://shader_cache
* Project manager uses $config_dir/shader_cache
* Options to tweak shader caching in project settings.
* Editor path configuration moved from EditorSettings to new class, EditorPaths, so it can be available early on (before shaders are compiled).
* Reworked ShaderCompilerRD to ensure deterministic shader code creation (else shader may change and cache will be invalidated).
* Added shader compression with SMOLV: https://github.com/aras-p/smol-v
- Move most properties from TileMap to TileSet,
- Make TileSet more flexible, supporting more feature (several
collision layers, etc...),
- Fusion both the TileMap and TileSet editor,
- Implement TileSetSources, and thus a new way to index tiles in the TileSet,
- Rework the TileSet and TileMap editors completely,
- Implement an editor zoom widget (and use it in several places)
This can be used to tell Godot to run an executable that will run Godot
rather than running Godot directly. This is useful to make Godot start
on the dedicated GPU when using a NVIDIA Optimus setup on Linux:
`prime-run %command%`
The `editor/run/main_run_args` setting declaration was moved to make it
visible in the ProjectSettings documentation.
The editor theme now makes use of rounded corners and less borders
to follow modern visual trends.
The default theme's colors were also tweaked to make the blue hue
more subtle (similar to the Arc theme, which was removed as a
consequence). The Alien theme was replaced by a Breeze Dark theme,
which should blend in well with the KDE theme.
Added an occlusion culling system with support for static occluder meshes.
It can be enabled via `Project Settings > Rendering > Occlusion Culling > Use Occlusion Culling`.
Occluders are defined via the new `Occluder3D` resource and instanced using the new
`OccluderInstance3D` node. The occluders can also be automatically baked from a
scene using the built-in editor plugin.
- Display the scene name, then the project name, then "Godot Engine".
- Display the "modified" mark before anytihng else.
Both of these changes ensure important, project-specific elements
can always be seen in the task bar which may truncate strings due to
its low per-item width.
- Use "Unnamed Project" if the project has no name (similar to the
Project Manager).
- Display a specific error message if the project doesn't have an
`export_presets.cfg` file.
- Display a list of detected export presets if an invalid export
preset name is supplied.
Its only purpose was to prevent importing CSV files as translations, but it
would still import them as *nothing*, leading to workflow issues.
This is now properly fixed with #47268 which allows disabling the import for
specific files.
* Added option for importers to show an Advanced settings dialog
* Created advanced settings dialog for Scene Importer
* Cleaned up importers (remove many old/unused options)
* Added the ability to customize every node, material, mesh and animation individually
* Saving to animations and meshes to files is now a manual process, making it more predictable
* Added the ability for materials to be replaced by external files (or to be made external, up to you).
* When doubleclicking an impoted scene in the filesystem dock, it automatically shows the import settings instead of asking to open it.
WARNING: Lightmap UV unwrap is not working, it needs to be re-made.
- Based on C++11's `atomic`
- Reworked `SafeRefCount` (based on the rewrite by @hpvb)
- Replaced free atomic functions by the new `SafeNumeric<T>`
- Replaced wrong cases of `volatile bool` by the new `SafeFlag`
- Platform-specific implementations no longer needed
Co-authored-by: Hein-Pieter van Braam-Stewart <hp@tmm.cx>
This removes hardcoded actions from things like LineEdit and TextEdit.
Previously, things like copy, paste, etc were all hardcoded to Ctrl+C, Ctrl+V, etc. They could not be changed. This allows the possibility of them being changed, by making them use the action map. This has the added benefit of greatly simplifying the input handling logic in those controls. The logic which was previously in a huge and hard to follow switch statement has been extracted to individual methods.
-Advanced Settings toggle also hides advanced properties when disabled
-Simplified Advanced Bar (errors were just plain redundant)
-Reorganized rendering quality settings.
-Reorganized miscelaneous settings for clean up.
-Only update rendering settings when project settings change
-Fixes the update spinner (and editor rendering) updating all the time.
-Added a "project_settings_changed" signal to EditorNode and EditorPlugin
-Added a new method in Resource: reset_state , used for reloading the same resource from disk
-Added a new cache mode "replace" in ResourceLoader, which reuses existing loaded sub-resources but resets their data from disk (or replaces them if they chaged type)
-Because the correct sub-resource paths are always loaded now, this fixes bugs with subresource folding or subresource ordering when saving.
-For inspector refresh, the inspector now detects if a property change by polling a few times per second and then does update the control if so. This process is very cheap.
-For property list refresh, a new signal (property_list_changed) was added to Object. _change_notify() is replaced by notify_property_list_changed()
-Changed all objects using the old method to the signal, or just deleted the calls to _change_notify(<property>) since they are unnecesary now.
-Always use temporal reproject, it just loos way better than any other filter.
-By always using termporal reproject, the shadowmap reduction can be done away with, massively improving performance.
-Disadvantage of temporal reproject is update latency so..
-Made sure a gaussian filter runs in XY after fog, this allows to keep stability and lower latency.
- Based on C++11's `thread` and `thread_local`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed (except for the few cases of non-portable functions)
- Simpler for `NO_THREADS`
- Thread ids are now the same across platforms (main is 1; others follow)
-All shadow rendering is done with raster now (no compute)
-All shadow rendering is done by rendering directly to the shadow atlas
-Improved how buffer clearing is done to optimize the above.
-Ability to set shadows as 16 bits.
-SDFGI direct light is done over many frames
-SDFGI Changed settings for rays/frame
-SDFGI Misc optimizations
-SDFGI Bug fix on probe scroll
-GIProbe was not working, got it to work again
-GIProbe dynamic objects were not working, fixed
-Added a half size GI option.
1. show valid directory path when opening editor file dialog
2. keep file name when changing path by entering path
3. add first extension in filter automatically if not given
4. remove directory in recent list if it's not valid anymore
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
* Support KHR_texture_transform.
* Support exporting glTF2
* Support exporting instanced scenes
* Extract into a gltf state and gltf document
* Add a tools menu for exporting gltf2
As a bonus, to have consistency between use Beziers and create insert tracks, use Beziers also gets a default via editor settings that is used when the confirmation dialog is disabled, instead of just falling back to creating non-Bezier tracks.
-Happens on import by default for all models
-Just works (tm)
-Biasing can be later adjusted per node or per viewport (as well as globally)
-Disabled AABB.get_support test because its broken
-Reworked how meshes are treated by importer by using EditorSceneImporterMesh and EditorSceneImporterMeshNode. Instead of Mesh and MeshInstance, this allows more efficient processing of meshes before they are actually registered in the RenderingServer.
-Integrated MeshOptimizer
-Reworked internals of SurfaceTool to use arrays, making it more performant and easy to run optimizatons on.
The code we had for PVRTexTool doesn't work as it's not compatible with current
PVRTexTool CLI options, and likely hasn't been for years.
Instead, we have our own vendored pvrtccompressor thirdparty library which all
users have thus de-facto been using. This commit moves the compress code to
`modules/pvr` where it belongs.
There's no proper compress function for PVRTC 2-bit format, that's a bug that
will need to be fixed (currently it's compressed as 4-bit format even if you
use Image::FORMAT_PVRTC2).
Fixes#28669.
Export presets contains the export_path option, to specify the default
export location, but the CLI export option disregarded that, and always
required and export path to be specified.
After this commit, if the export path is not specified in the command,
the one in the preset will be used, erroring only if it's not present or
invalid.
This also makes borders always display in the editor theme,
even if the editor scale is below 100%. Otherwise, "focus" outlines
would vanish when using an editor scale below 100%,
which harms usability.
-Removed normal/specular properties from nodes
-Create CanvasTexture, which can contain normal/specular channels
-Refactored, optimized and simplified 2D shaders
-Use atlas for light textures.
-Use a shadow atlas for shadow textures.
-Use both items aboves to make light rendering stateless (faster).
-Reorganized uniform sets for more efficiency.
The editor used to only copy drag-dropped files in the File System pane
if the given file was a valid resource, or had a specific file format
(ttf, otf).
With this PR, all drag and dropped files are copied instead, no matter
their extension.
Changes:
* EngineDebugger is exposed to gdscript. Game side of communication can be implemented through it.
* EditorDebuggerPlugin is added which handles the editor side of communication.
- Extacted all syntax highlighting code from text edit
- Removed enable syntax highlighting from text edit
- Added line_edited_from signal to text_edit
- Renamed get/set_syntax_highlighting to get/set_syntax_highlighter
- Added EditorSyntaxHighligher
- Makes all boolean setters/getters consistent.
- Fixes bug where `glow_hdr_bleed_scale` was not used.
- Split CameraEffects to their own source file.
- Reorder all Environment method and properties declarations,
definitions and bindings to be consistent with each other
and with the order of property bindings.
- Bind missing enum values added with SDFGI.
- Remove unused SDFGI enhance_ssr boolean.
- Sync doc changes after SDFGI merge and other misc changes.
A static function is added to EditorNode which allows for filename
disambiguation given a list of filenames and the corresponding list of
absolute paths for those files. This function is then used to
disambiguate scene and script tabs in the editor.
The existing theme editor icon could be unintentionally set for any
global class with matching name (`Group` icon, `Group` class_name etc),
which would only show up in the "Create Dialog" context, but not the
scene tree dock.
This change prevents this behavior, and ensures that the icon can be
actually overidden by explicit icon path in `class_name`, if there's any
custom icon to begin with.
The correct built-in type's icon is fetched for child classes if there
are no custom icons detected throughout base classes as well, so it
isn't left empty for those cases.
`get_global_class_name` for `GDScriptLanguage` is slow because
it forces to parse an entire script each time. This patch ensures
that the icon is actually fetched from the EditorData where they
are loaded beforehand.
This change also makes the behavior consistent with the existing
`get_object_icon` method in EditorNode.
ToolButton has no redeeming differences with Button;
it's just a Button with the Flat property enabled by default.
Removing it avoids some confusion when creating GUIs.
Existing ToolButtons will be converted to Buttons, but the Flat
property won't be enabled automatically.
This closes https://github.com/godotengine/godot-proposals/issues/1081.
The crash happens further down when setting an invalid owner in
`Node::_set_owner_nocheck` but I couldn't figure out how to fix it.
But here the proper fix is to catch the invalid scene file early on
and fail loading it.
Part of #17372.
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
Using `clang-tidy`'s `modernize-use-default-member-init` check and
manual review of the changes, and some extra manual changes that
`clang-tidy` failed to do.
Also went manually through all of `core` to find occurrences that
`clang-tidy` couldn't handle, especially all initializations done
in a constructor without using initializer lists.
This option can be used to workaround various issues with stuff
not reloading properly when changes are made.
The option was renamed to clarify the fact that it actually
reloads the scene saved on the filesystem.
-Added LocalVector (needed it)
-Added stb_rect_pack (It's pretty cool, we could probably use it for other stuff too)
-Fixes and changes all around the place
-Added library for 128 bits fixed point (required for Delaunay3D)
Part of #33027, also discussed in #29848.
Enforcing the use of brackets even on single line statements would be
preferred, but `clang-format` doesn't have this functionality yet.
It changed name as part of the DisplayServer and input refactoring
in #37317, with the rationale that input no longer goes through the
main loop, so the previous Input singleton now only does filtering.
But the gains in consistency are quite limited in the renaming, and
it breaks compatibility for all scripts and tutorials that access
the Input singleton via the scripting language. A temporary option
was suggested to keep the scripting singleton named `Input` even if
its type is `InputFilter`, but that adds inconsistency and breaks C#.
Fixesgodotengine/godot-proposals#639.
Fixes#37319.
Fixes#37690.
Switching between editors now requires holding Ctrl to avoid
conflicts with the new F2 shortcut.
The asset library can now be accessed by pressing Ctrl + F4
on Windows and Linux, or Alt + 4 on macOS.
This partially addresses #38139.
Also added an easier way to load native GLSL shaders.
Extras:
Had to fix no-cache for subresources in resource loader, it was not properly working, making shaders not properly reload.
Note:
The precommit hooks are broken because they don't seem to support enums from one class being used in another.
Feel free to fix this after merging this PR.
- Made shadow bias size independent, so it will remain when changing light or camera size.
- Implemented normal offset bias, which greatly enhances quality.
- Added transmission to subsurface scattering
- Reimplemented shadow filter modes
Closes#17260
The size settings are more "just works", with default scale and depth scale
values that don't need much tweaking.
Additionally, a "skin" mode was added so skin looks better.
EDIT: Cleaned up SSR filter shader a bit.
The Request Docs button is partly responsible for layout overflow
issues on narrow displays, such as #31133.
It also tended to attract spam and low-effort issues that were
difficult to act upon. A "Send Docs Feedback" menu option has been added
to replace it.
For us, it practically only changes the fact that `A<A<int>>` is now
used instead of the C++03 compatible `A<A<int> >`.
Note: clang-format 10+ changed the `Standard` arguments to fully
specified `c++11`, `c++14`, etc. versions, but we can't use `c++17`
now if we want to preserve compatibility with clang-format 8 and 9.
`Cpp11` is still supported as deprecated alias for `Latest`.
It's tedious work...
Some can't be ported as they depend on private or protected methods
of different classes, which is not supported by callable_mp (even if
it's a class inherited by the current one).
Remove now unnecessary bindings of signal callbacks in the public API.
There might be some false positives that need rebinding if they were
meant to be public.
No regular expressions were harmed in the making of this commit.
(Nah, just kidding.)
Main:
- It's now implemented thanks to `<mutex>`. No more platform-specific implementations.
- `BinaryMutex` (non-recursive) is added, as an alternative for special cases.
- Doesn't need allocation/deallocation anymore. It can live in the stack and be part of other classes.
- Because of that, it's methods are now `const` and the inner mutex is `mutable` so it can be easily used in `const` contexts.
- A no-op implementation is provided if `NO_THREADS` is defined. No more need to add `#ifdef NO_THREADS` just for this.
- `MutexLock` now takes a reference. At this point the cases of null `Mutex`es are rare. If you ever need that, just don't use `MutexLock`.
- Thread-safe utilities are therefore simpler now.
Misc.:
- `ScopedMutexLock` is dropped and replaced by `MutexLock`, because they were pretty much the same.
- Every case of lock, do-something, unlock is replaced by `MutexLock` (complex cases where it's not straightfoward are kept as as explicit lock and unlock).
- `ShaderRD` contained an `std::mutex`, which has been replaced by `Mutex`.
- Renames PackedIntArray to PackedInt32Array.
- Renames PackedFloatArray to PackedFloat32Array.
- Adds PackedInt64Array and PackedFloat64Array.
- Renames Variant::REAL to Variant::FLOAT for consistency.
Packed arrays are for storing large amount of data and creating stuff like
meshes, buffers. textures, etc. Forcing them to be 64 is a huge waste of
memory. That said, many users requested the ability to have 64 bits packed
arrays for their games, so this is just an optional added type.
For Variant, the float datatype is always 64 bits, and exposed as `float`.
We still have `real_t` which is the datatype that can change from 32 to 64
bits depending on a compile flag (not entirely working right now, but that's
the idea). It affects math related datatypes and code only.
Neither Variant nor PackedArray make use of real_t, which is only intended
for math precision, so the term is removed from there to keep only float.
This attribute is now part of the standard we target so we no longer
need compiler-specific hacks.
Also enables -Wimplicit-fallthrough for Clang now that we can properly
support it. It's already on by default for GCC's -Wextra.
Fixes new warnings raised by Clang's -Wimplicit-fallthrough.
Due to the port to Vulkan and complete redesign of the rendering backend,
the `drivers/gles3` code is no longer usable in this state and is not
planned to be ported to the new architecture.
The GLES2 backend is kept (while still disabled and non-working) as it
will eventually be ported to serve as the low-end renderer for Godot 4.0.
Some GLES3 features might be selectively ported to the updated GLES2
backend if there's a need for them, and extensions we can use for that.
So long, OpenGL driver bugs!
-Texture renamed to Texture2D
-TextureLayered as base now inherits 2Darray, cubemap and cubemap array
-Removed all references to flags in textures (they will go in the shader)
-Texture3D gone for now (will come back later done properly)
-Create base rasterizer for RenderDevice, RasterizerRD
Whenever any node is renamed, EditorNode::_edit_current() is called and it resets plugins used for current edited properties. This change forces the inspector to update even though the same object is edited, to make sure all plugins are restored properly from unfolded properties/resources/etc.
Fixes#32832
The previous behavior relying on the provided extension was problematic
on macOS since .zip is the main extension used for the full project
export (binary + data pack).
We add a dedicated `--export-pack` command line option to define when
only the data pack should be exported. Its extension will still be
inferred from the path.
Fixes#23073.
I'm barely scratching the surface of the changes needed to make the
--export command line interface easy to use, but this should already
improve things somewhat.
- Streamline `can_export()` templates check in all platforms, checking
first for the presence of official templates, then of any defined
custom template, and reporting on the absence of any.
Shouldn't change the actual return value much which is still true if
either release or debug is usable - we might want to change that
eventually and better validate against the requested target.
- Fix discrepancy between platforms using `custom_package/debug` and
`custom_template/debug` (resp. `release`).
All now use `custom_template`, which will break compatibility for
`export_presets.cfg` with earlier projects (but is easy to fix).
- Use `can_export()` when attempting a command line export and report
the same errors that would be shown in the editor.
- Improve error reporting after a failed export attempt, handling
missing template and invalid path more gracefully.
- Cleanup of unused stuff in EditorNode around the export workflow.
- Improve --export documentation in --help a bit.
Fixes#16949 (at least many of the misunderstandings listed there).
Fixes#18470.
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
Makes behavior consistent with selecting/deselecting single nodes and fixes a regression about the focused node being lost when multi-selecting.
Fixes#33332
As a result of commit b49226e085 FileAccess::open no longer returns ERR_CANT_OPEN if the file cannot be found/opened.
Instead check against ERR_FILE_NOT_FOUND or ERR_FILE_CANT_OPEN.
EditorNode was not correctly setting the class memeber when creating the
theme, using a local variable instead.
Theme is now created before registering exporters (as they might need it).
This fades out messages originating from the editor to make messages
printed by the project stand out more.
This also tweaks wording in some editor messages for consistency.
There is a new setting for Default ColorPicker color mode in Editor Settings->Interface->Inspector. Initially this setting will be RGB. Editor ColorPicker will always start with mode defined in this settiing.
Fixes#30755 and #30754
The fade animation tended to give the editor a "sluggish" feel
when running at lower FPS (which is common in heavy 3D scenes),
so it's probably a good idea to remove it.
This also makes dimming less intense (50% instead of 60%).
The language didn't make it clear that it's installing a *source* template
to the project folder, for later use when compiling custom APKs.
Fixes#28736.
Condensed some if and ERR statements. Added dots to end of error messages
Couldn't figure out EXPLAINC. These files gave me trouble: core/error_macros.h, core/io/file_access_buffered_fa.h (where is it?),
core/os/memory.cpp,
drivers/png/png_driver_common.cpp,
drivers/xaudio2/audio_driver_xaudio2.cpp (where is it?)
- Clean up the recent scripts dialog to match the recent scenes dialog
- Add "..." at the end of shortcuts that cause a modal dialog to appear
This closes#31148.
I believe many calls to the said function was mistakenly left out leading to InspectorDock having a pointer to deleted values.
As such, this commit introduces many such calls to inspector_dock where I believe is appropriate...
This will be used for communicating between the Godot editor and external IDEs/editors, for things like opening files, triggering hot-reload and running the game with a debugger attached.
Only a single checkbox is now exposed to control whether the editor
window should be dimmed when opening a popup. The main use case
for disabling it is picking colors from the editor window while
a popup is open.
Also allow lifting the decimal step formatting with a hint range step
of 0. A new `range_step_decimals()` is added for this to avoid breaking
compatibility on the general purpose `step_decimals()` (which still
returns 0 for an input step of 0).
Supersedes #25470.
Partial fix for #18251.
This makes it clearer that the editor window is busy while it's quitting
(which can take a while on slower PCs).
This also makes it feel more responsive to user input.
Note that the effect is only visible if
"Interface > Editor > Quit Confirmation" is disabled in the
Editor Settings, as the quit confirmation already makes
the editor window dim while quitting.
The fix for EditorNode is a bit hacky, but the handling of the buttons
and features there is hacky too (based on enums that might not reflect
the actual state).
- Make visibility of the spinner and "update always" option editor-wide,
rather than per-project metadata.
- Add options "Show Update Spinner" and "Update Continuously" under
Editor Settings > Interface > Editor. Both options are false by
default.
- Rename some variables and constants to be more consistent and clearer:
"update always" -> "update continuously", "update changes" -> "update
when changed", "update menu" -> "update spinner", "circle" -> "update
spinner".
Fixes#23738.
This is an editor setting and its value can also be toggled
using an entry in the Editor toolbar. The console will still
appear briefly when starting the project manager or editor,
as it's still compiled as console application.
Does not impact exported games, which will still run without
console in release and with console in debug mode.
A project setting or export option could be added to disable
it in debug mode if there's demand for it, but that would
greatly reduce the usefulness of debug builds if Windows users
can no longer report error and crash messages.
Fixes#17889.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
It's not necessary, but the vast majority of calls of error macros
do have an ending semicolon, so it's best to be consistent.
Most WARN_DEPRECATED calls did *not* have a semicolon, but there's
no reason for them to be treated differently.
This commit fixes several issues related to moving scenes and resources
in an open project.
* Don't try to reload scenes while not all scenes are updated yet.
* Don't use the UndoRedo system to update non-user initiated editor
state.
* Resave scenes after moving files and updating resource path(s).
This decreases CPU/GPU usage when the window is unfocused, which can
be beneficial to laptop users.
This also makes the low-processor mode sleep project setting no longer
affect the editor. Instead, two new editor settings now define the
duration of sleeping when the editor is focused and unfocused.
This closes#24209 and partially addresses #29257.
This dialog searches every Resource-derived file in the project, making
it extremely useful for searching everything from audio files to scripts.
Unlike the Quick Open Script and Quick Open Scene dialogs, you don't need
to think about the type of file you're opening, just its name.
Shift + Alt + O was chosen to match the existing shortcuts for
Quick Open Scene and Quick Open Script.
It seems to stay compatible with formatting done by clang-format 6.0 and 7.0,
so contributors can keep using those versions for now (they will not undo those
changes).
Adds `FALLTHROUGH` macro to specify when a fallthrough is intentional.
Can be replaced by `[[fallthrough]]` if/when we switch to C++17.
The warning is now enabled by default for GCC on `extra` warnings level
(part of GCC's `-Wextra`). It's not enabled in Clang's `-Wextra` yet,
but we could enable it manually once we switch to C++11. There's no
equivalent feature in MSVC for now.
Fixes#26135.
-Made relationship lines appear based on theme settings, not previous hack
-Fix drawing of relationship lines (was broken)
-Fix double initialization of theme settings
If a scene is instanced in another scene, any changes to the first
triggers _clear_undo_history in EditorNode::set_current_scene, which
increments the version in UndoRedo::clear_history. This results in a
modified status. Passing false to clear_history fixes this issue.
Fixes#25942
This reverts commit 2ae2735a7a.
It also closes panels like the shader text editor when trying to
discard code completion tooltips. It could be readded with extra
care that modals like tooltips will take precedence and mark the
event as handled.
Fixes#17159, fixes#20738, closes#22727.
Fixes the following Clang 7 warnings:
```
editor/editor_help.h:123:7: warning: 'EditorHelpIndex::popup' hides overloaded virtual function [-Woverloaded-virtual]
editor/editor_help.h:95:7: warning: 'EditorHelpSearch::popup' hides overloaded virtual function [-Woverloaded-virtual]
editor/editor_help.h:96:7: warning: 'EditorHelpSearch::popup' hides overloaded virtual function [-Woverloaded-virtual]
editor/plugins/curve_editor_plugin.h:141:15: warning: 'CurvePreviewGenerator::generate' hides overloaded virtual function [-Woverloaded-virtual]
editor/plugins/script_editor_plugin.h:70:7: warning: 'ScriptEditorQuickOpen::popup' hides overloaded virtual function [-Woverloaded-virtual]
editor/quick_open.h:69:7: warning: 'EditorQuickOpen::popup' hides overloaded virtual function [-Woverloaded-virtual]
main/tests/test_io.cpp:53:15: warning: 'TestIO::TestMainLoop::input_event' hides overloaded virtual function [-Woverloaded-virtual]
servers/audio/effects/audio_effect_record.h:69:15: warning: 'AudioEffectRecordInstance::process_silence' hides overloaded virtual function [-Woverloaded-virtual]
core/os/memory.h:119:2: warning: destructor called on non-final 'ContextGL_X11' that has virtual functions but non-virtual destructor [-Wdelete-non-virtual-dtor]
core/os/memory.h:119:2: warning: destructor called on non-final 'EditorScriptCodeCompletionCache' that has virtual functions but non-virtual destructor [-Wdelete-non-virtual-dtor]
core/os/memory.h:119:2: warning: destructor called on non-final 'Engine' that has virtual functions but non-virtual destructor [-Wdelete-non-virtual-dtor]
core/os/memory.h:119:2: warning: destructor called on non-final 'PhysicalBone::JointData' that has virtual functions but non-virtual destructor [-Wdelete-non-virtual-dtor]
core/os/memory.h:119:2: warning: destructor called on non-final 'VisualServerScene' that has virtual functions but non-virtual destructor [-Wdelete-non-virtual-dtor]
core/os/memory.h:119:2: warning: destructor called on non-final 'VisualServerViewport' that has virtual functions but non-virtual destructor [-Wdelete-non-virtual-dtor]
```
Fixes the following GCC 5 warnings:
```
core/io/zip_io.h:128:26: warning: 'zlib_filefunc_def zipio_create_io_from_file(FileAccess**)' defined but not used [-Wunused-function]
core/script_debugger_remote.cpp:110:17: warning: 'ObjectID safe_get_instance_id(const Variant&)' defined but not used [-Wunused-function]
drivers/unix/socket_helpers.h:103:12: warning: 'int _socket_create(IP::Type&, int, int)' defined but not used [-Wunused-function]
drivers/unix/socket_helpers.h:45:15: warning: 'size_t _set_sockaddr(sockaddr_storage*, const IP_Address&, int, IP::Type)' defined but not used [-Wunused-function]
drivers/unix/socket_helpers.h:76:15: warning: 'size_t _set_listen_sockaddr(sockaddr_storage*, int, IP::Type, IP_Address)' defined but not used [-Wunused-function]
editor/editor_fonts.cpp:40:24: warning: 'Ref<BitmapFont> make_font(int, int, int, int, const int*, const Ref<Texture>&)' defined but not used [-Wunused-function]
editor/editor_themes.cpp:85:26: warning: 'Ref<StyleBoxFlat> change_border_color(Ref<StyleBoxFlat>, Color)' defined but not used [-Wunused-function]
editor/import/editor_import_collada.cpp:493:13: warning: 'void _generate_normals(const PoolVector<int>&, const PoolVector<Vector3>&, PoolVector<Vector3>&)' defined but not used [-Wunused-function]
editor/import/editor_import_collada.cpp:524:13: warning: 'void _generate_tangents_and_binormals(const PoolVector<int>&, const PoolVector<Vector3>&, const PoolVector<Vector3>&, const PoolVector<Vector3>&, PoolVector<float>&)' defined but not used [-Wunused-function]
editor/pvrtc_compress.cpp:118:13: warning: 'void _compress_etc(Image*)' defined but not used [-Wunused-function]
modules/etc/image_etc.cpp:89:13: warning: 'void _decompress_etc1(Image*)' defined but not used [-Wunused-function]
modules/etc/image_etc.cpp:93:13: warning: 'void _decompress_etc2(Image*)' defined but not used [-Wunused-function]
modules/gdscript/editor/gdscript_highlighter.cpp:46:13: warning: 'bool _is_whitespace(CharType)' defined but not used [-Wunused-function]
scene/2d/cpu_particles_2d.cpp:510:14: warning: 'float rand_from_seed_m1_p1(uint32_t&)' defined but not used [-Wunused-function]
scene/3d/cpu_particles.cpp:474:14: warning: 'float rand_from_seed_m1_p1(uint32_t&)' defined but not used [-Wunused-function]
scene/resources/default_theme/default_theme.cpp:123:20: warning: 'Ref<Shader> make_shader(const char*, const char*, const char*)' defined but not used [-Wunused-function]
scene/resources/default_theme/default_theme.cpp:130:24: warning: 'Ref<BitmapFont> make_font(int, int, int, int, const int*, const Ref<Texture>&)' defined but not used [-Wunused-function]
```
Had to split `core/io/zip_io.h` into header and .cpp file without 'static' keyword.
Not fixed yet (static definition in header used in some files but not all):
```
modules/websocket/lws_helper.h:111:13: warning: 'void _lws_make_protocols(void*, int (*)(lws*, lws_callback_reasons, void*, void*, size_t), PoolVector<String>, _LWSRef**)' defined but not used [-Wunused-function]
```
Also fixed a couple other warnings missed in previous commits.
As discussed with @reduz, now that the FileSystem dock is getting
files display in tree view (#21426), we can change the docks layout
again to give more height to the new inspector.
The new layout is thus:
- Top left: Scene and Import docks
- Bottom left: FileSystem
- Right (full height): Inspector and Node docks
The 2nd left (LEFT_R) and 1st right (RIGHT_L) VSplitContainers (the
ones in use) also get an additional 40px of width compared to their
previous size (which was the minimum size).
Fixes#21480.
If this is undesired it can be avoided by specifying builtin_certs=no .
Bundled SSL certs will be used unless you specify an override in:
Project Settings -> SSL -> Certificates .
This commit makes operator[] on Vector const and adds a write proxy to it. From
now on writes to Vectors need to happen through the .write proxy. So for
instance:
Vector<int> vec;
vec.push_back(10);
std::cout << vec[0] << std::endl;
vec.write[0] = 20;
Failing to use the .write proxy will cause a compilation error.
In addition COWable datatypes can now embed a CowData pointer to their data.
This means that String, CharString, and VMap no longer use or derive from
Vector.
_ALWAYS_INLINE_ and _FORCE_INLINE_ are now equivalent for debug and non-debug
builds. This is a lot faster for Vector in the editor and while running tests.
The reason why this difference used to exist is because force-inlined methods
used to give a bad debugging experience. After extensive testing with modern
compilers this is no longer the case.
-Project/Editor settings now show tooltips properly
-Settings thar require restart now will show a restart warning
-Video driver is now visible all the time, can be changed easily
-Added function to request current video driver
Fixes#20119 where newly installed templates were not detected.
Also fix a bug with preset deletion where it would attempt to
edit an already removed preset. For this I made it so that
ItemList::deselect_all() also resets `current` to -1, as a manual
ItemList::deselect(idx) already does.
This reverts commits 28ab60422d
and 7821b70a00.
Fixes#19576, and likely the fact that subresources are no
longer saved when saving scenes with no change.
KEY_MASK_CMD is automatically replaced by KEY_MASK_CTRL on non-OSX
and KEY_MASK_META (Command key) on OSX, so it should be used for all
Ctrl/Cmd + key shortcuts.
Also de-hacked the macOS shortcut replacements with proper conditional
definition. Not tested on macOS, cannot judge if they are good shortcuts.
Fixes#10761.
Modules can register their own editor plugins (like GridMap does),
so no need to put module-specific classes in the `editor/` folder.
Also cleans up the previous SCons env pollution from the Recast
module, integrating its code into libmodules as other modules.
This reverts commit 00c689d625.
Reason: "Missing template" is just one possible explanation for
`err` being != OK here, it does not make sense to hardcode it in
the generic error message (and break translations doing so).
Now generating mouse events from touch is optional (on by default) and it's performed by `InputDefault` instead of having each OS abstraction doing it. (*)
The translation algorithm waits for a touch index to be pressed and tracks it translating its events to mouse events until it is raised, while ignoring other pointers.
Furthermore, to avoid an stuck "touch mouse", since not all platforms may report touches raised when the window is unfocused, it checks if touches are still down by the time it's focused again and if so it resets the state of the emulated mouse.
*: In the case of Windows, since it already provides touch-to-mouse translation by itself, "echo" mouse events are filtered out to have it working like the rest.
On X11 a little hack has been needed to avoid a case of a spurious mouse motion event that is generated during touch interaction.
Plus: Improve/fix tracking of current mouse position.
** Summary of changes to settings: **
- `display/window/handheld/emulate_touchscreen` becomes `input/pointing_devices/emulate_touch_from_mouse`
- New setting: `input/pointing_devices/emulate_mouse_from_touch`
-Missing Icons
-Missing freezing option (for baking light and faster load)
-Missing a way to export from Godot (GLTF2?)
-Probably buggy (may freeze editor, can be worked around easily, but let me know if this happens so it's easier to catch bugs)
Happy testing!
Add debug flag to the 'Export PCK/ZIP' option
Make 'Export PCK/ZIP' notify when the export process begins. This is necessary to receive the 'EditorExportPlugin::_export_begin' callback
Fixes most current reports on Coverity Scan of uninitialized scalar
variable (CWE-457): https://cwe.mitre.org/data/definitions/457.html
These happen most of the time (in our code) when instanciating structs
without a constructor (or with an incomplete one), and later returning
the instance. This is sometimes intended though, as some parameters are
only used in some situations and should not be double-initialized for
performance reasons (e.g. `constant` in ShaderLanguage::Token).
Fixes#16923. I'm not a fan of the special case for scripts in editor_node.cpp, but in any case,
I made it so it wouldn't make the external editor to re-open just because we switched scenes.
When `_save_all_scenes` or `save_resource_in_path` was called, they
always saved all the scenes and the resource no matter if they were
modified or not. For example, when `saving before run` option was
checked, it always overwrote the current scene and the default
environment simply by opening and runing the project.
This PR adds checks for unsaved scenes (using the same `unsave` check
others method used) and modified resources (comparing last modified
time and last import time).
Fix#6025.
As `KEY_F3` was used both for changing to script editor window and, in
the script editor, for finding the next result in the last search, and
the key event is **not** consumed, the resulting behaviour was similar
to press `F3` twice, first to change to script editor and second to
find the next result of a previous search.
This PR sets the `key_pressed` status of `InputEvent` to `false` if
this event is responsible of an editor change, simulating the
consumption of the event.
Fix#17334
Found via `codespell -q 3 --skip="./thirdparty,./editor/translations" -I ../godot-word-whitelist.txt`
Whitelist consists of:
```
ang
doubleclick
lod
nd
que
te
unselect
```
Using `misc/scripts/fix_headers.py` on all Godot files.
Some missing header guards were added, and the header inclusion order
was fixed in the Bullet module.
As spotted by @robfram, closes#15288.
Also reviewed other uses of `if (String.find(.*))` for potential similar mistakes, found a wrong (and useless) one in ScriptEditorDialog.
Previously command line export would go simultaneously with reimport,
which caused final package to either miss something or contain
outdated assets or perhaps even broken ones.
-Fixes to unwrapper (remove degenerates), makes Thekla not crash
-Added optional cancel button in EditorProgress
-Added function to force processing of events (needed for cancel button)
- Now it is usable from both `CanvasItem` and `Spatial` editors.
- `EditorPlugin` API changes:
- `forward_draw_over_canvas()` becomes `forward_draw_over_viewport()`.
- `update_canvas()` becomes `update_overlays()`, which now triggers the update of every overlay on top of any 2D or 3D viewports present. Also now it returns the number of such viewports, which is useful whenever you need to know the number of draw-over calls you'll get.
- New: `[set/is]_force_draw_over_forwarding_enabled()` to force overlaying regardless it handles the current object type, in a similar fashion as `[set/is]_input_event_forwarding_always_enabled`. This kind of overlay is also on top of those for regular handled node types.
- New: `forward_force_draw_over_canvas()`, which is the callback that gets called for plugins that enable forced overlaying.
Removes the need for _MKSTR all over the place which has the drawback of
converting _MKSTR(UNKNOWN_DEFINE) to "UKNOWN_DEFINE" instead of throwing
a compilation error.
Added icons for files/folders in drag preview
Fixed folders getting an empty string label
Don't show "1 more file(s)" label instead of the file
Added "more folders" case if moving folders exclusively
Merged drag_files and drag_files_and_dirs to reduce code duplication
Simplified get_drag_data_fw and removed commented out code
EditorProgress calls Main::iteration which calls MessageQueue::flush
which may result in _fs_changed being called again. This fixes the loop
Godot enters in such case.
Fixes#11189
Fixes inconsistent behaviour where clicking on the "Interface"
in the Editor Settings wouldn't collapse the category as is the
case for all the other categories.
This changes the order of creating some of the dialogs that may appear
during project import/startup. It is possible for the 'accept' dialog to
be required before it is initialized.
This moves all of these dialogs to earlier in the constructor so this
can't happen.
- Build callbacks now return bool to determine if the build was successful. If the build fails, the editor won't run the game.
- Makes sure build callbacks are called after saving the scene ("Save Before Running" option).
Currently we rely on some undefined behavior when Object->cast_to() gets
called with a Null pointer. This used to work fine with GCC < 6 but
newer versions of GCC remove all codepaths in which the this pointer is
Null. However, the non-static cast_to() was supposed to be null safe.
This patch makes cast_to() Null safe and removes the now redundant Null
checks where they existed.
It is explained in this article: https://www.viva64.com/en/b/0226/
- Fixes some single-dash leftovers that were missed in the previous commit
- Reorder the help output for clarity, and document missing options
- Drop obsolete options: --noop, --pack, --editor-scene, --level, --import, --import-script, --no-quit
- Improve error message on malformed arguments and do not display help on error
- Always use long form of arguments when starting a new Godot process from C++, for clarity and easy grepping
- Cleanup obsolete code here and there
- Fixes some single-dash leftovers that were missed in the previous commit
- Reorder the help output for clarity, and document missing options
- Drop obsolete options: --noop, --pack, --editor-scene, --level, --import, --import-script, --no-quit
- Improve error message on malformed arguments and do not display help on error
- Cleanup obsolete code here and there
When save_each_scene is false, only scenes that have been saved at
least once are saved. But EditorNode tries to save scenes with no
filename too (they're never saved), so it crashes.
Add set/has_auto_height for ItemList to automatically set minimum
size by content.
Add hash to About dialog.
Resize About dialog so that dev list appears in 3 columns.
-Added new 3D stream player node
-Added ability for Area to capture sound from streams
-Added small features in physics to be able to properly guess distance to areas for sound
-Fixed 3D CollisionObject so shapes are added the same as in 2D, directly from children
-Fixed KinematicBody API to make it the same as 2D.
- show scene thumbnail on hover
- resize if has many tabs
- show full scene file name with current edited scene
- can be customized EditorSettings > Interface > Scene Tab
- close scene with mouse middle button
-Added default environment editor setting
-Added environment created by default in new projects
-Removed default light and ambient from spatial editor, to make the editor more PBR compliant
Adapted the plugin to recent changes in input classes and pool arrays.
Fixed an out-of-bounds bug in the process.
Doesn't display anything for a single point (existing issue).
This adds a new implementation of the EditorImportPlugin class, allowing to leverage the new importing system via tool scripts.
Will be especially useful when used together with GDNative, to support formats like fbx :)
"ALL IS GOOD" was a lie.
In particular, removes verbose "path not recognized" false positive.
The actual logic is to (somewhat naively) check all ResourceFormatLoaders
and to pick the first good match, so no need to warn about the formats
that do not match the type hint.
Darkens the editor on WindowDialog popup.
This adds the following new Editor settings:
- interface/dim_editor_on_dialog_popup (true) # Enable/Disable editor dimming
- interface/dim_amount (0.6) # Percentage of how much the editor will be darkened (0-1)
- interface/dim_transition_time # The duration (in seconds) of the color blending effect (0-1), 0 is instant.
Please test this thoroughly, I haven't yet seen a case where it fails to work properly but I'm sure I didn't test all
windows of the editor :P
I can show you the code
Pretty, with proper whitespace
Tell me, coder, now when did
You last write readable code?
I can open your eyes
Make you see your bad indent
Force you to respect the style
The core devs agreed upon
A whole new world
A new fantastic code format
A de facto standard
With some sugar
Enforced with clang-format
A whole new world
A dazzling style we all dreamed of
And when we read it through
It's crystal clear
That now we're in a whole new world of code
The other subfolders of tools/ had already been moved to either
editor/, misc/ or thirdparty/, so the hiding the editor code that
deep was no longer meaningful.