The underscore prefix was used to avoid the conflict between the `RID` class
name and the matching enum value in `Variant::Type`.
This can be fixed differently by prefixing uses of the `RID` class in `Variant`
with the scope resolution operator, as done already for `AABB`.
`debug_symbols=yes` will now behave like `debug_symbols=full` did
before. The difference in compressed file sizes is not that large,
which means there isn't much point in having two different values.
This helps make the buildsystem easier to understand.
We want debug builds to have a console and easy stdout redirection by default.
Windows makes reading the stdout/stderr stream from gui applications too cumbersome
(and most users don't know about it, and just wonder why they don't see a thing).
On Windows, WINDOW_EVENT_FOCUS_IN was never sent by the display server
for popups, because WM_ACTIVATE events are received during the call to
_update_window_style, which happened before the callbacks were set.
This was causing some issues with the way Popup is now handling closing on
parent focus.
Now _update_window_style is only called during show_window, after Window
initialized callbacks.
This code currently isn't compiled (and cannot compile).
We plan to re-add OpenGL ES-based renderer(s) in Godot 4.0 alongside Vulkan
(probably ES 3.0, possibly also a low-end ES 2.0), but the code will be quite
different so it's not relevant to keep this old Godot 3.2 code.
The `drivers/gles2` code from the `3.2` branch can be used as a reference for
a potential new implementation.
Previously `joypad_count` was used as the index into the d_joypads array when initializing a new gamepad.
This caused the accidental override of an already connected device when a gamepad with a lower id was disconnected and connected again.
fixes#17566
It's too hard to get compatibility between GNU and BSD sed,
so let's just use perl oneliners.
And improve it to also remove trailing tabs, not just spaces.
Until https://github.com/psf/black/pull/1328 makes it in a stable release,
we have to use the latest from Git.
Apply new style fixes done by latest black.
Implements exit codes into the engine so tests can return their statuses.
Ideally we don't do this, and we use FIXUP logic to 'begin' and 'end' the engine execution for tests specifically.
Since realistically we're initialising the engine here we don't want to do that, since String should not require an engine startup to test a single header.
This lowers the complexity of running the unit tests and even for
physics should be possible to implement such a fix.
Its last use was removed in Godot 3.0, so it no longer makes sense to define.
Also removed `D3D_DEBUG_INFO` for Windows as it's likely a left over from a
long time ago pre-opensourcing when Godot had some form of Direct3D 9 support?
When creating a window, Godot would first register it to the WM(show it) and then set its flags.
This works fine on a floating WM, but on tiling WMs as soon as a window gets registered
the WM immediately acts on the window by scaling it up and treating it as a generic window,
being registered without any special flags.
This commit separates the showing of the window into another function and calls it after the most important flags are set,
making windows with special flags(eg. all popups) work again on tiling WMs.
Fixes#37930
Detecting the case where WM_SIZE is received during the window creation.
There's no need to call window_resize on the Vulkan context.
Also creating a WindowData entry early enough to avoid storing a
separate WindowData wrongly associated to INVALID_WINDOW_ID.
Fixes#39199
The previous code for OS_Windows::get_ticks_usec() multiplied the tick count by 1000000 before dividing by ticks_per_second. The ticks is counted in a 64 bit integer and is susceptible to overflow when a machine has been running for a long period of time (days) with a high frequency timer.
This PR separates the overall calculation into one for seconds and one for the remainder, removing the possibility of overflow due to the multiplier.
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
Using `clang-tidy`'s `modernize-use-default-member-init` check and
manual review of the changes, and some extra manual changes that
`clang-tidy` failed to do.
Also went manually through all of `core` to find occurrences that
`clang-tidy` couldn't handle, especially all initializations done
in a constructor without using initializer lists.
Part of #33027, also discussed in #29848.
Enforcing the use of brackets even on single line statements would be
preferred, but `clang-format` doesn't have this functionality yet.
It changed name as part of the DisplayServer and input refactoring
in #37317, with the rationale that input no longer goes through the
main loop, so the previous Input singleton now only does filtering.
But the gains in consistency are quite limited in the renaming, and
it breaks compatibility for all scripts and tutorials that access
the Input singleton via the scripting language. A temporary option
was suggested to keep the scripting singleton named `Input` even if
its type is `InputFilter`, but that adds inconsistency and breaks C#.
Fixesgodotengine/godot-proposals#639.
Fixes#37319.
Fixes#37690.
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
For us, it practically only changes the fact that `A<A<int>>` is now
used instead of the C++03 compatible `A<A<int> >`.
Note: clang-format 10+ changed the `Standard` arguments to fully
specified `c++11`, `c++14`, etc. versions, but we can't use `c++17`
now if we want to preserve compatibility with clang-format 8 and 9.
`Cpp11` is still supported as deprecated alias for `Latest`.
EngineDebugger is the new interface to access the debugger.
It tries to be as agnostic as possible on the data that various
subsystems can expose.
It allows 2 types of interactions:
- Profilers:
A subsystem can register a profiler, assigning it a unique name.
That name can be used to activate the profiler or add data to it.
The registered profiler can be composed of up to 3 functions:
- Toggle: called when the profiler is activated/deactivated.
- Add: called whenever data is added to the debugger
(via `EngineDebugger::profiler_add_frame_data`)
- Tick: called every frame (during idle), receives frame times.
- Captures: (Only relevant in remote debugger for now)
A subsystem can register a capture, assigning it a unique name.
When receiving a message, the remote debugger will check if it starts
with `[prefix]:` and call the associated capture with name `prefix`.
Port MultiplayerAPI, Servers, Scripts, Visual, Performance to the new
profiler system.
Port SceneDebugger and RemoteDebugger to the new capture system.
The LocalDebugger also uses the new profiler system for scripts
profiling.
- Removed platform-specific implementations.
- Now all semaphores are in-object, unless they need to be conditionally created.
- Similarly to `Mutex`, provided a dummy implementation for when `NO_THREADS` is defined.
- Similarly to `Mutex`, methods are made `const` for easy use in such contexts.
- Language bindings updated: `wait()` and `post()` are now `void`.
- Language bindings updated: `try_wait()` added.
Bonus:
- Rewritten the `#ifdef` in `mutex.h` to meet the code style.
Main:
- It's now implemented thanks to `<mutex>`. No more platform-specific implementations.
- `BinaryMutex` (non-recursive) is added, as an alternative for special cases.
- Doesn't need allocation/deallocation anymore. It can live in the stack and be part of other classes.
- Because of that, it's methods are now `const` and the inner mutex is `mutable` so it can be easily used in `const` contexts.
- A no-op implementation is provided if `NO_THREADS` is defined. No more need to add `#ifdef NO_THREADS` just for this.
- `MutexLock` now takes a reference. At this point the cases of null `Mutex`es are rare. If you ever need that, just don't use `MutexLock`.
- Thread-safe utilities are therefore simpler now.
Misc.:
- `ScopedMutexLock` is dropped and replaced by `MutexLock`, because they were pretty much the same.
- Every case of lock, do-something, unlock is replaced by `MutexLock` (complex cases where it's not straightfoward are kept as as explicit lock and unlock).
- `ShaderRD` contained an `std::mutex`, which has been replaced by `Mutex`.
This attribute is now part of the standard we target so we no longer
need compiler-specific hacks.
Also enables -Wimplicit-fallthrough for Clang now that we can properly
support it. It's already on by default for GCC's -Wextra.
Fixes new warnings raised by Clang's -Wimplicit-fallthrough.
It was initially implemented in #5871 for Godot 3.0, but never really
completed or thoroughly tested for most platforms. It then stayed in
limbo and nobody seems really keen to finish it, so it's better to
remove it in 4.0, and re-add eventually (possibly with a different API)
if there's demand and an implementation confirmed working on all
platforms.
Closes#8770.
Due to the port to Vulkan and complete redesign of the rendering backend,
the `drivers/gles3` code is no longer usable in this state and is not
planned to be ported to the new architecture.
The GLES2 backend is kept (while still disabled and non-working) as it
will eventually be ported to serve as the low-end renderer for Godot 4.0.
Some GLES3 features might be selectively ported to the updated GLES2
backend if there's a need for them, and extensions we can use for that.
So long, OpenGL driver bugs!
- Renamed option to `builtin_vulkan`, since that's the name of the
library and if we were to add new components, we'd likely use that
same option.
- Merge `vulkan_loader/SCsub` in `vulkan/SCsub`.
- Accordingly, don't use built-in Vulkan headers when not building
against the built-in loader library.
- Drop Vulkan registry which we don't appear to need currently.
- Style and permission fixes.
-Texture renamed to Texture2D
-TextureLayered as base now inherits 2Darray, cubemap and cubemap array
-Removed all references to flags in textures (they will go in the shader)
-Texture3D gone for now (will come back later done properly)
-Create base rasterizer for RenderDevice, RasterizerRD
Add check to prevent compositor sync if the graphics driver is forcing vsync.
Fixes#35038.
(Addendum: this PR does not negatively impact users unaffected by #35038.)
Unify pack file version and magic to avoid hardcoded literals.
`version.py` now always includes `patch` even for the first release in
a new stable branch (e.g. 3.2). The public name stays without the patch
number, but `Engine.get_version_info()` already included `patch == 0`,
and we can remove some extra handling of undefined `VERSION_PATCH` this
way.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
The new 'split_libmodules=yes' option is useful to work around linker
command line size limitations when linking a huge number of objects.
We're currently over 64k chars when linking libmodules.a on Windows
with MinGW, which triggers issues as seen in #30892.
Even on Linux, we can also reach linker command line size limitations
by adding more custom modules.
We force this option to True for MinGW on Windows, which fixes#30892.
Additional changes to lib splitting:
- Fix linking of the split module libs with interdependent symbols,
hacking our way into LINKCOM and SHLINKCOM to set the `--start-group`
and `--end-group` flags.
- Fix Python 3 compatibility in `methods.split_lib()`.
- Drop seemingly obsolete condition for 'msys' on 'posix'.
- Drop the unnecessary 'split_drivers' as the drivers lib is no longer
too big since we moved all thirdparty builds to modules.
Co-authored-by: Hein-Pieter van Braam-Stewart <hp@tmm.cx>
This makes it possible to know whether the window is focused
at a given time, without having to track the focus state manually
using `NOTIFICATION_WM_FOCUS_IN` and `NOTIFICATION_WM_FOCUS_OUT`.
This partially addresses #33928.
WM_MOUSEWHEEL and WM_MOUSEHWHEEL report mouse coordinates relative to
the screen (see lParam in [1]), rather than to the window like the rest
of the mouse events.
The current code already makes adjustments to take that into account.
However, it only makes the adjustments if the mouse is not captured, and
the coordinates are always relative to the screen regardless of whether
the mouse is captured or not, so let's fix the code to always
consistently apply the adjustments.
This fixes#29559.
[1] - https://docs.microsoft.com/en-us/windows/win32/inputdev/wm-mousewheel
Currently, the console appears when running OS.execute in an exported project,
but not in the editor. This change prevents it from appearing in either.
Only affects console applications.
The basic point is as in 2.1 (appending the PCK into the executable), but this implementation also patches a dedicated section in the ELF/PE executable so that it matches the appended data perfectly.
The usage of integer types is simplified in existing code; namely, using plain `int` for small quantities.
It's the recommended way to set those, and is more portable
(automatically prepends -D for GCC/Clang and /D for MSVC).
We still use CPPFLAGS for some pre-processor flags which are not
defines.
This is an editor setting and its value can also be toggled
using an entry in the Editor toolbar. The console will still
appear briefly when starting the project manager or editor,
as it's still compiled as console application.
Does not impact exported games, which will still run without
console in release and with console in debug mode.
A project setting or export option could be added to disable
it in debug mode if there's demand for it, but that would
greatly reduce the usefulness of debug builds if Windows users
can no longer report error and crash messages.
Fixes#17889.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
Warnings raised by Emscripten 1.38.0 and MinGW64 5.0.4 / GCC 8.3.0.
JS can now build with `werror=yes warnings=extra`.
MinGW64 still has a few warnings to resolve with `warnings=extra`,
and only one with `warnings=all`.
Part of #29033 and #29801.
This is a new singleton where camera sources such as webcams or cameras on a mobile phone can register themselves with the Server.
Other parts of Godot can interact with this to obtain images from the camera as textures.
This work includes additions to the Visual Server to use this functionality to present the camera image in the background. This is specifically targetted at AR applications.
In x11, windows and osx crash handlers, check project settings exists
before looking up the crash handler message setting.
Avoids crashing the crash handler when handling a crash outside project
settings lifetime. Instead omitting the configurable message and
continuing with trace dump.
Include paths are processed from left to right, so we use Prepend to
ensure that paths to bundled thirdparty files will have precedence over
system paths (e.g. `/usr/include` should have lowest priority).
Many contributors (me included) did not fully understand what CCFLAGS,
CXXFLAGS and CPPFLAGS refer to exactly, and were thus not using them
in the way they are intended to be.
As per the SCons manual: https://www.scons.org/doc/HTML/scons-user/apa.html
- CCFLAGS: General options that are passed to the C and C++ compilers.
- CFLAGS: General options that are passed to the C compiler (C only;
not C++).
- CXXFLAGS: General options that are passed to the C++ compiler. By
default, this includes the value of $CCFLAGS, so that setting
$CCFLAGS affects both C and C++ compilation.
- CPPFLAGS: User-specified C preprocessor options. These will be
included in any command that uses the C preprocessor, including not
just compilation of C and C++ source files [...], but also [...]
Fortran [...] and [...] assembly language source file[s].
TL;DR: Compiler options go to CCFLAGS, unless they must be restricted
to either C (CFLAGS) or C++ (CXXFLAGS). Preprocessor defines go to
CPPFLAGS.
When getting system directories for Windows, we currently use
SHGetFolderPathW. This is a deprecated function and doesn't support
"Downloads" folders.
As a replacement, this commit uses the newer SHGetKnownFolderPath
function, which is supported since Windows Vista. Godot 3.0 only
supports Windows 7+, so we don't need to use SHGetFolderPathW for
backwards compatibility.
Fixes#26876
On Windows, when "Language for non-Unicode programs" were set to "Japanese (Japan)", MSVC would by default use Shift JIS (code page 932) to interpret source files, which would result in test_string failing to compile because of characters in `test_34()`. Forcing utf-8 for MSVC fixes the issue
It seems to stay compatible with formatting done by clang-format 6.0 and 7.0,
so contributors can keep using those versions for now (they will not undo those
changes).
GLES2 is not designed to be a drop-in replacement for the GLES3 backend,
so the fallback mode has to be used knowingly. It *can* make sense for
simple projects which make sure to handle the differences between both
rendering backends, but most users should stick to one supported backend.
By making it opt-in, we can now use this parameter to define whether to
export ETC textures to Android and iOS when using GLES3 + Fallback.
When using GLES3 without Fallback on Android, set the proper min GLES
version in the AndroidManifest.
Also made the option boolean and renamed it for clarity and to avoid
conflict with the previous String option (which would always evaluate as
"true" otherwise).
Fixes#26569.
We've been defaulting to WASAPI since 3.0 and it's superior to RtAudio
in all aspects.
Obsoletes and closes#25503.
Also enable WINMIDI on MinGW, this had been missed initially.
Fix os_windows.cpp and crash_handler_windows.cpp which had weird
dependencies on RtAudio.h's includes (ugh).
Also drop some unused files.
Renamed:
- `platform/iphone/sem_iphone.h` -> `semaphore_iphone.h`
(same for `osx`)
- `platform/uwp/gl_context_egl.h` -> `context_egl_uwp.h`
- in `platform/windows`: `context_gl_win.h`, `crash_handler_win.h`,
`godot_win.cpp`, `joypad.h` and `key_mapping_win.h` all renamed to
use `windows`. Some classes renamed accordingly too.
- `EditorExportAndroid` and `EditorExportUWP` renamed to
`EditorExportPlatformAndroid` and `EditorExportPlatformUWP`
- `power_android` and `power_osx` renamed to `PowerAndroid` and
`PowerOSX`
- `OSUWP` renamed to `OS_UWP`
Dropped:
- `platform/windows/ctxgl_procaddr.h`
While looking into a different issue, I've noticed that Visual Studio Intellisense does not work well for Godot project when using Windows Vista+ APIs (e.g. CreateThreadpool), i.e. it does not recognise the APIs because they are defined in Windows header files for Vista+ only.
This is because the WINVER and _WIN32_WINNT symbols don't have their values set in the generated Godot project file. This fixes the problem by setting the values when generating the project file.
Contrarily to what #23434 assumed, this is not a memory leak,
the VisualServerRaster instance is passed as a parameter to
VisualServerWrapMT's constructor.
Fixes#23437.
At least the ones I got when I compiled it using Mingw64 POSIX on Xubuntu 18.04. Plus use the Size2 of get_window_size() directly, rather than reconstructing it.
Fixes the following Clang 7 warnings:
```
editor/editor_help.h:123:7: warning: 'EditorHelpIndex::popup' hides overloaded virtual function [-Woverloaded-virtual]
editor/editor_help.h:95:7: warning: 'EditorHelpSearch::popup' hides overloaded virtual function [-Woverloaded-virtual]
editor/editor_help.h:96:7: warning: 'EditorHelpSearch::popup' hides overloaded virtual function [-Woverloaded-virtual]
editor/plugins/curve_editor_plugin.h:141:15: warning: 'CurvePreviewGenerator::generate' hides overloaded virtual function [-Woverloaded-virtual]
editor/plugins/script_editor_plugin.h:70:7: warning: 'ScriptEditorQuickOpen::popup' hides overloaded virtual function [-Woverloaded-virtual]
editor/quick_open.h:69:7: warning: 'EditorQuickOpen::popup' hides overloaded virtual function [-Woverloaded-virtual]
main/tests/test_io.cpp:53:15: warning: 'TestIO::TestMainLoop::input_event' hides overloaded virtual function [-Woverloaded-virtual]
servers/audio/effects/audio_effect_record.h:69:15: warning: 'AudioEffectRecordInstance::process_silence' hides overloaded virtual function [-Woverloaded-virtual]
core/os/memory.h:119:2: warning: destructor called on non-final 'ContextGL_X11' that has virtual functions but non-virtual destructor [-Wdelete-non-virtual-dtor]
core/os/memory.h:119:2: warning: destructor called on non-final 'EditorScriptCodeCompletionCache' that has virtual functions but non-virtual destructor [-Wdelete-non-virtual-dtor]
core/os/memory.h:119:2: warning: destructor called on non-final 'Engine' that has virtual functions but non-virtual destructor [-Wdelete-non-virtual-dtor]
core/os/memory.h:119:2: warning: destructor called on non-final 'PhysicalBone::JointData' that has virtual functions but non-virtual destructor [-Wdelete-non-virtual-dtor]
core/os/memory.h:119:2: warning: destructor called on non-final 'VisualServerScene' that has virtual functions but non-virtual destructor [-Wdelete-non-virtual-dtor]
core/os/memory.h:119:2: warning: destructor called on non-final 'VisualServerViewport' that has virtual functions but non-virtual destructor [-Wdelete-non-virtual-dtor]
```
Also finally move freetype to its own env and disable warnings for it.
Still needs some work to fix the awkward situation of the freetype and
svg modules used in scene/ and editor/ respectively.
This allows more consistency in the manner we include core headers,
where previously there would be a mix of absolute, relative and
include path-dependent includes.
This adds a static is_viable() method to all rasterizers which has to be
called before initializing the rasterizer. This allows us to check what
rasterizer to use in OS::initialize together with the GL context
initialization.
This commit also adds a new project setting
"rendering/quality/driver/driver_fallback" which allows the creator of a
project to specify whether or not fallback to GLES2 is allowed. This
setting is ignored for the editor so the editor will always open even if
the project itself cannot run. This will hopefully reduce confusion for
users downloading projects from the internet.
We also no longer crash when GLES3 is not functioning on a platform.
This fixes#15324
Also increase AppVeyor cache size to 1024,
should match what is available for us in the free plan:
https://www.appveyor.com/docs/build-cache/#cache-size-beta
And drop obsolete debug_release option for Windows, superseded
by target=release and debug_symbols=yes.
Use a Microsoft recommended way of process termination for the project
process run from the editor. This allows loaded DLLs to receive and handle
DLL_PROCESS_DETACH notification and cleanup any global state before the
process actually exits.
This commit adds support for unicode strings in OS_Windows::move_to_trash.
Also reverts commit 6188388c5a as it did not add extra null character to the path string (SHFILEOPSTRUCTA and SHFILEOPSTRUCTW require path to be double null-terminated).
Fixes thread and process handles leak when running and killing project
from editor (caused by a missing CloseHandle call) plus a potential leak
when calling OS_Windows::execute with p_blocking and !r_pipe.
The leak could be easily observed with a Handles counter in Task Manager
(or Performance Monitor) for the Godot editor process.
- Refactored all builder (make_*) functions into separate Python modules along to the build tree
- Introduced utility function to wrap all invocations on Windows, but does not change it elsewhere
- Introduced stub to use the builders module as a stand alone script and invoke a selected function
There is a problem with file handles related to writing generated content (*.gen.h and *.gen.cpp)
on Windows, which randomly causes a SHARING VIOLATION error to the compiler resulting in flaky
builds. Running all such content generators in a new subprocess instead of directly inside the
build script works around the issue.
Yes, I tried the multiprocessing module. It did not work due to conflict with SCons on cPickle.
Suggested workaround did not fully work either.
Using the run_in_subprocess wrapper on osx and x11 platforms as well for consistency. In case of
running a cross-compilation on Windows they would still be used, but likely it will not happen
in practice. What counts is that the build itself is running on which platform, not the target
platform.
Some generated files are written directly in an SConstruct or SCsub file, before the parallel build starts. They don't need to be written in a subprocess, apparently, so I left them as is.
This commit makes operator[] on Vector const and adds a write proxy to it. From
now on writes to Vectors need to happen through the .write proxy. So for
instance:
Vector<int> vec;
vec.push_back(10);
std::cout << vec[0] << std::endl;
vec.write[0] = 20;
Failing to use the .write proxy will cause a compilation error.
In addition COWable datatypes can now embed a CowData pointer to their data.
This means that String, CharString, and VMap no longer use or derive from
Vector.
_ALWAYS_INLINE_ and _FORCE_INLINE_ are now equivalent for debug and non-debug
builds. This is a lot faster for Vector in the editor and while running tests.
The reason why this difference used to exist is because force-inlined methods
used to give a bad debugging experience. After extensive testing with modern
compilers this is no longer the case.
-Project/Editor settings now show tooltips properly
-Settings thar require restart now will show a restart warning
-Video driver is now visible all the time, can be changed easily
-Added function to request current video driver
Initialized the PID to -2, which will be the value returns in blocking-
mode where the PID is not available. (-1 was already taken to signify an
execution failure).
OS::execute will now properly return a non-OK error code when it fails
to execute the target file.
The documentation was rewritten to be very clear about the differences
between blocking and non-blocking mode.
Fixes#19056.
[x11] Preserve window size when calling this method.
[osx] Make sure it don't make the window resizable if it's not needed.
[windows] clean up the code.
- Fix a bug when mouse is confined don't update the cursor shape.
- Don't let the mouse leave the window when resizing to a smaller
resolution when MOUSE_MODE_CONFINED.
- Fix set_borderless_window to preserve the actual video_mode.widht/height.
- Adds q/quit option to console debugging
- Adds options (variable_prefix)
- Breaks into debugger with Ctrl-C in local debug mode (Unix/Windows)
- Added option to list all breakpoints
- Fixes add/remove breakpoint bug (invalid path parsing)
- Minor cleanup
Now generating mouse events from touch is optional (on by default) and it's performed by `InputDefault` instead of having each OS abstraction doing it. (*)
The translation algorithm waits for a touch index to be pressed and tracks it translating its events to mouse events until it is raised, while ignoring other pointers.
Furthermore, to avoid an stuck "touch mouse", since not all platforms may report touches raised when the window is unfocused, it checks if touches are still down by the time it's focused again and if so it resets the state of the emulated mouse.
*: In the case of Windows, since it already provides touch-to-mouse translation by itself, "echo" mouse events are filtered out to have it working like the rest.
On X11 a little hack has been needed to avoid a case of a spurious mouse motion event that is generated during touch interaction.
Plus: Improve/fix tracking of current mouse position.
** Summary of changes to settings: **
- `display/window/handheld/emulate_touchscreen` becomes `input/pointing_devices/emulate_touch_from_mouse`
- New setting: `input/pointing_devices/emulate_mouse_from_touch`
[Linux] Ensures that the custom cursor will be used when changing to
MOUSE_MODE_VISIBLE. Fix#3086
[Windows] Fix cursor flickering when MOUSE_MODE_HIDDEN.
[Mac] Fix possible cursor flicker when MOUSE_MODE_HIDDEN.
SCons has good compiler detection logic for MSVC compilers. Up to now,
Godot hasn't used it; it depends on passed-in OS environment vars from
a specific Visual Studio cmd.exe windows. This makes it harder to
build from a msys or cygwin shell.
This change allows SCons to autodetect Visual Studio unless it sees
VCINSTALLDIR in the os.environ. It also adds a 'msvc_version' arg for
manual specification of compiler version, and uses the existing 'bits'
arg to specify the target architecture. More detail could be added as
desired. It also adds 'use_mingw' to always use mingw, even if Visual
Studio is installed. That uses the existing mingw setup logic.
If people are used to building Godot in a Visual Studio cmd window,
this should not change the behavior in that case, since VCINSTALLDIR
will be set in those windows. (However, note that you could now unset
that var and build with any other MSVC version or target arch, even in
that window.)
I refactored much of platform/windows/detect.py during this, to
simplify and clarify the logic. I also cleaned up a bunch of env var
settings in windows/detect.py and SConstruct to use modern SCons
idioms and simplify things.
I suspect this will also enable using the Intel compiler on Windows,
though that hasn't been tested.
This commit adds a new rendering backend, GLES2, and adds a
project setting to enable it.
Currently this backend can only be used on the X11 platform,
but integrating into other platforms is planned.
The previous logic with VERSION_MKSTRING was a bit unwieldy, so there were
several places hardcoding their own variant of the version string, potentially
with bugs (e.g. forgetting the patch number when defined).
The new logic defines:
- VERSION_BRANCH, the main 'major.minor' version (e.g. 3.1)
- VERSION_NUMBER, which can be 'major.minor' or 'major.minor.patch',
depending on whether the latter is defined (e.g. 3.1.4)
- VERSION_FULL_CONFIG, which contains the version status (e.g. stable)
and the module-specific suffix (e.g. mono)
- VERSION_FULL_BUILD, same as above but with build/reference name
(e.g. official, custom_build, mageia, etc.)
Note: Slight change here, as the previous format had the build name
*before* the module-specific suffix; now it's after
- VERSION_FULL_NAME, same as before, so VERSION_FULL_BUILD prefixed
with "Godot v" for readability
Bugs fixed thanks to that:
- Export templates version matching now properly takes VERSION_PATCH
into account by relying on VERSION_FULL_CONFIG.
- ClassDB hash no longer takes the build name into account, but limits
itself to VERSION_FULL_CONFIG (build name is cosmetic, not relevant
for the API hash).
- Docs XML no longer hardcode the VERSION_STATUS, this was annoying.
- Small cleanup in Windows .rc file thanks to new macros.
Found via `codespell -q 3 --skip="./thirdparty,./editor/translations" -I ../godot-word-whitelist.txt`
Whitelist consists of:
```
ang
doubleclick
lod
nd
que
te
unselect
```
Current this is hardcoded as '1' for any platform except Unix. The
little is_wow64() dance is required to get correct output on a 32bit
compiled godot running on 64bit Windows according to MSDN.
This code should be UWP safe but I have no way to test that so it's not
implemented for UWP yet.
This adds a separate_debug_symbols option to the x11, windows, and osx
targets. This will default to adding normal debugging symbols to the
artifacts and only splits them when separate_debug_symbols=yes on the
Scons command line.
Also made LINK and CXXFLAGS configurable as command line options.
Note that LINK currently expects the *compiler* that will be used
for linking and will call its configured linker behind the scenes
(so g++, clang++, etc., not ld.gold). See #15364 for details.
Using `misc/scripts/fix_headers.py` on all Godot files.
Some missing header guards were added, and the header inclusion order
was fixed in the Bullet module.
They are NOT constant methods, as state by the comment message,
they fetch the last packet and then forget about it, actively
changing the state of the object.
-Fixes to unwrapper (remove degenerates), makes Thekla not crash
-Added optional cancel button in EditorProgress
-Added function to force processing of events (needed for cancel button)
- Add an editor setting to read the rcedit path.
- Add settings to the export preset with icon and other exe information
(version, name, copyright, etc.)
Setting the vsync in the main thread, after the rendering thread starts
and takes the OpenGL context fails, so we need to do that before.
Also, for some reason, the main thread cannot make current the context
anymore.
Fixes#13447
This allows to specify any valid folder name (including with subfolders) to use
as user:// on all platforms. The folder is constrained to the platform-specific
OS::get_data_path() (typically what `XDG_DATA_HOME` resolves to).
Fixes#13236.
That "revision" was inherited from SVN days but had been since then
used to give information about the build: "custom_build", "official",
"<some distro's build>".
It can now be overridden with the BUILD_NAME environment variable.
Removes the need for _MKSTR all over the place which has the drawback of
converting _MKSTR(UNKNOWN_DEFINE) to "UKNOWN_DEFINE" instead of throwing
a compilation error.
Spec version 0.7 from https://standards.freedesktop.org/basedir-spec/basedir-spec-0.7.html
(latest as of this commit).
Three virtual methods are added to OS for the various XDG paths we will use:
- OS::get_data_path gives XDG_DATA_HOME, or if missing:
~/.local/share on X11, ~/Library/Application Support/ on macOS and %APPDATA% on Windows
- OS::get_config_path gives XDG_CONFIG_HOME, or if missing:
~/.config on X11, ~/Library/Application Support/ on macOS and %APPDATA% on Windows
- OS::get_cache_path gives XDG_CACHE_HOME, or if missing:
~/.cache on X11, ~/Library/Caches on macOS and %APPDATA% on Windows
So for Windows there are no changes, for Linux we follow the full split spec
and for macOS stuff will move from ~/.godot to ~/Library/Application Support/Godot.
Support for system-wide installation of templates on Unix was removed for now,
as it's a bit hackish and I don't think anyone uses it.
user:// will still be OS::get_data_path() + "/godot/app_userdata/$name" by
default, but when using the application/config/use_shared_user_dir option
it will now use XDG_DATA_HOME/$name, e.g. ~/.local/share/MyGame.
For now everything still goes in EditorSettings::get_settings_dir(), but
this will be changed in a later commit to make use of the new splitting
where relevant.
Part of #3513.
There are still some left in the Android Java code, even stuff to swap between
GLES1 and GLES2 support from early Godot days... would be good to see some cleanup
there too one day.
The "graphics/api" option for Android exports is removed, as only GLES 3.0 is supported.
It can be readded when GLES 2.0 support comes back. Fixes#13004.
Previously logging logic was scattered over OS class implementations
with plenty of duplication. Major changes in this commit:
- Extracted logging logic into a separate Logger hierarchy. It allows
easy configuration of logging mechanism depending on compile-time or
run-time configuration.
- Implemented RotatedFileLogger which is usually used with StdLogger,
providing persistency of logs. It is often important to be able to
obtain logs of the game even in production to be able to understand
what happened prior to some problem. On mobile there previously was
no way to obtain the logs aside from having the device connected to
your machine.
- flush() is not performed in release mode for every logged line. It
is only performed for errors.
Rename user facing methods and variables as well as the corresponding
C++ methods according to the folloming changes:
* pos -> position
* rot -> rotation
* loc -> location
C++ variables are left as is.
Now that we have a built-in stacktrace on a segfault it would be useful
to have debug information on debug_release builds so that bugreports can
include this information. Without this debug info we will still get
function names in the backtrace but not file location.
This commit will by default build all targets with minimal debug info
and then strip the information into separate files. On MacOS this is a
.dSYM file, on Linux/MingW this is a .debug file. MacOSX will
automatically load a dSYM file if it exists in its debugger. On
Linux/MingW we create a 'gnu debuglink' meaning that gdb and friends
will automatically find the debug symbols if they exist.
Existing workflow for developers does not change at all, except that we
now create two instead of one build artifact by default.
This commit also adds a 'debug_symbols' option to X11, MacOS, and MingW
targets. The default is 'yes' which corresponds to -g1. The alternatives
are 'no' (don't generate debug infos at all) or 'full' which runs with
-g2. A target=debug build will now build with -g3.
After discussing with @reduz and @akien-mga it was decided that we do
not allow assignments or declarations in if statements. This PR removes
the instances of this I could find by automated means.
We need the efficient SRWLock methods which are not supported on Vista,
and loading them dynamically while providing fallbacks is not worth the
effort. Closes#10243.
Sorry Vista users... As you are running a supported which is no longer
supported by Microsoft (https://support.microsoft.com/en-us/help/13853/windows-lifecycle-fact-sheet),
we can only encourage you to upgrade to a more recent version if you can,
or switch to Linux, which should give your old hardware a new youth.
When looking up a symbol from a library, previously an error was
shown when the symbol did not exist. That caused confusion when the
lookup was completely optional.
This adds a new parameter to that method so that those errors can
be handled manually if needed.
Tried to organize the configure(env) calls in sections, using the same order
for all platforms whenever possible.
Apart from cosmetic changes, the following issues were fixed:
- Android: cleanup linkage, remove GLESv1_CM and GLESv2
- iPhone: Remove obsolete "ios_gles22_override" option
- OSX:
* Fix bits detection (default to 64) and remove obsolete "force_64_bits" option
(closes#9449)
* Make "fat" bits argument explicit
- Server: sync with X11
- Windows: clean up old DirectX 9 stuff
- X11:
* Do not require system OpenSSL for building (closes#9443)
* Fix typo'ed use_leak_sanitizer option
* Fix .llvm suffix overriding custom extra_suffix
This module was written by bojidar-bg and me, with the help of ClikCode and touilleMan.
This adds a module to Godot that enables the use of dynamic libraries as a source for scripts.
That also allows third party libraries to be linked to Godot more easily and without creating modules.
For a readme see https://github.com/GodotNativeTools/godot_headers/blob/master/README.md
All the warnings are factored out of the platform-specific files and moved to
SConstruct. Will have to check that it does not introduce regressions on some
platforms/compilers.
(cherry picked from commit 31107daa1a)
The ID property for InputEvents is set by `SceneTree` when sending the event down the tree.
So there's no need for the platform specific code to set this value when it will later be overriden anyway...
I can show you the code
Pretty, with proper whitespace
Tell me, coder, now when did
You last write readable code?
I can open your eyes
Make you see your bad indent
Force you to respect the style
The core devs agreed upon
A whole new world
A new fantastic code format
A de facto standard
With some sugar
Enforced with clang-format
A whole new world
A dazzling style we all dreamed of
And when we read it through
It's crystal clear
That now we're in a whole new world of code
The other subfolders of tools/ had already been moved to either
editor/, misc/ or thirdparty/, so the hiding the editor code that
deep was no longer meaningful.
Done:
- X11, server (tested)
- Windows (developed, would be nice to retest)
- OSX (not tested)
Prepared (not developed):
- Android (code is here, but may not compile)
- iphone
- winrt
- bb10
- haiku
- javascript
Now InputDefault is responsible for giving out joypad device IDs to the platform, instead of each platform handling this itself.
This makes it possible for c++ modules to add their own "custom" gamepad devices, without the risk of messing up events in case the user also has regular gamepads attached (using the OS code).
For now, it's implemented for the main desktop platforms.
Possible targets for future work: android, uwp, javascript
In #7839 I see the same error that was fixed in #7833 occuring on the
Windows platform. This moves the audio driver closing to the same place
in OS_Windows::finalize() as it is in OS_X11::finalize()
This fixes#7839
This doesn't seem to be needed anymore and the code to free the unused
rasterizer was throwing a memory violation since it was getting set to a
value somehow.
We should probably create a specific function for setting the
recv buffer anyway. UDP sockets does not need to bind (listen)
to be able to call recvfrom. This is especially useful for clients
who just call set_send_address and start communicating with a server.
- TCP:
- `listen` bind to wildcard "*" -> dual stack socket
- `listen` bind to address -> socket from address type
- `connect` -> resolve using best protocol (UNSPEC), socket from address type
- UDP:
- `listen` bind to wildcard "*" -> dual stack socket
- `listen` bind to address -> socket from address type
- `put_packet`/`put_var` -> resolve using TYPE_ANY (UNSPEC), socket from address type
(to change socket type you must first call `close` it)
Windows did not compile anymore because DI8DEVTYPE_JOYPAD obviously isn't defined in the directx headers ^^
I also did the same renaming as in #7473 for the windows platform and reverted the changes in the gamepad
mappings.
Passed as a compiler define to be sure it is always define before windows.h
is loaded. This means that Godot officially requires Vista API or later, it will
not work on Windows XP or earlier.
Also fix a bogus check for Windows 7 API.
-Changed SectionedPropertyEditor to support this
-Renamed Globals singleton to GlobalConfig, makes more sense.
-Changed the logic behind persisten global settings, instead of the persist checkbox, a revert button is now available
That year should bring the long-awaited OpenGL ES 3.0 compatible renderer
with state-of-the-art rendering techniques tuned to work as low as middle
end handheld devices - without compromising with the possibilities given
for higher end desktop games of course. Great times ahead for the Godot
community and the gamers that will play our games!
IP_Address changes:
- Converts to and from String transparently while handling IPv4 as IPv6
mapped (::ffff:[IP]) address internally.
- Completely remove AddrType enum.
- Setting/Getting of ip array is now only possible through dedicated functions
(ie. set_ipv4, get_ipv4, set_ipv6, get_ipv6)
- Add function to know if the address is a valid IPv4 (for IP implementation and enet)
PacketPeerUDP/StreamPeerTCP/TCP_Server now uses an instance variable
to store the selected ip_type (IPv4/IPv6/ANY, where ANY = dual stack).
All calls to resolve addresses, sending/receving data, connecting/listening
will use that socket type.
Done with `autopep8 --select=E7`, fixes:
- E701 - Put colon-separated compound statement on separate lines.
- E702 - Put semicolon-separated compound statement on separate lines.
- E703 - Put semicolon-separated compound statement on separate lines.
- E711 - Fix comparison with None.
- E712 - Fix (trivial case of) comparison with boolean.
- E713 - Fix (trivial case of) non-membership check.
- E721 - Fix various deprecated code (via lib2to3).
( @Akien : this PR is for current HEAD only, not to be cherry-picked for 2.1.1 )
this is manual revertion of #6501 which introduced a bug that prevented
scons from detecting Mingw under Windows when MSVC was installed.
(thanks to @vnen for finding this)
AND
it fixes the actual bug that prevented scons from detecting MSVC standalone
compiler ( a confusions between ``VSINSTALLDIR`` and ``VCINSTALLDIR`` )
The freeware Standalone MSVC C++ Build Tools are available here :
http://landinghub.visualstudio.com/visual-cpp-build-tools
Not fully happy about the way this one interacts with the various
platforms. Maybe the platform_config.h should be generated by the
SCsub instead of passing a define just to know where is the header.
-Most 2D drawing is implemented
-Missing shaders
-Missing all 3D
-Editor needs to be set on update always to be used, otherwise it does not refresh
-Large parts of editor not working
Under Windows, Scons is now capable of detecting and compiling with
standalone MSVC compilers (aka "Visual C++ Build Tools").
http://landinghub.visualstudio.com/visual-cpp-build-tools
Tried with version 2015, and native x86 and x64 compilers under
Windows 10 pro 64 and Windows 8.1 64, with the default Win8 SDK
provided by the "Visual C++ Build Tools" web-installer.
Follow the same compiling instructions than for compiling with Visual
Studio, except that Visual Studio is no more required.
KNOWN ISSUES :
- ``methods.detect_visual_c_compiler_version()`` will emit a warning message
on computers where the ``VSINSTALLDIR`` environement variable is not present.
But it should compile just fine and still automatically detects the 32 or
64 bits according to the compiler you picked.
TODO :
- eventually, update ``platform/winrt/dectet.py`` with function
``methods.msvc_is_detected()`` and try to compile winrt/UWP with
these standalone compilers (if you did not select Win10 SDK when
installing the standalone tools, you can run it again).
- update doc to make users aware of "Visual C++ Build Tools" aka
"stadalone MSVC".
- eventually, update ``methods.detect_visual_c_compiler_version()``
- Fix buildsystem for WinRT/UWP platform.
- Add audio driver and joystick mapping for WinRT.
- Enable thread class for WinRT.
- Refactor MSVC compiler architecture detection to methods.py, so it can
be used by Windows and WinRT.
For reference, when you include a Windows header (be it directly windows.h or something that includes it)
put it at the end of the includes. it seems I forgot.
This reverts commit 85a5290ee8.
The patch itself is good and it could maybe be readded in the future,
but right now Microsoft forced its Windows 10 "update" on people with older
Intel HD Graphics 3000 IGP without ensuring that they can ship proper drivers,
and such users seem to get Godot crashing due to this patch. Sorry :(
Closes#5452.
When moving or resizing the window, Windows spins up a seperate event-loop, effectively blocking the normal one.
To work around this, we're starting a timer that will continue sending WM_TIMER messages which we can use to keep the mainloop running.
fixes#4695
This allows us not to have to hack our definitions in the upstream files,
making it easier to upgrade to newer versions in the future.
For the include paths to work, the headers are moved to a GL subfolder to
match their upstream location.
Can't create user data folder when project name has ``\ / : * ? " < > |`` characters on OS_Windows & OS_Unix.
So, change it to ``-`` to be able to make folder.
fixes#4928 and it's altanative to #4986.
-Rearrange favorites in fs dock with drag and drop
-Removed import -> sub-scene, moved to scenetree contextual menu
-Removed import -> re-import , moved and integrated to FS dock
-Added ability in FS dock to re-import more than one resource
simultaneously
-Added ability to drag from native filesystem explorer to Godot, only
works on Windows though
-Removed scene reimport merge options, never worked well. Eventually
merging materials should be re-added
-Added ability to set custom root node type when importing scenes
-Re-Import is now automatic, can be configured back to manual in editor
settings
-Added resource previews in property list for many resource types
Also Enables automatic detection of architecture for the MSVC compilers.
Builds without assembly optimisations for x64
Closes issue #3098
Signed-off-by: Aleksandar Danilovic <greatgames.alexandar@gmail.com>
According to MSDN's
documentation (https://msdn.microsoft.com/en-us/library/windows/desktop/bb762181(v=vs.85).aspx),
CSIDL_PERSONAL represents the default path to Windows Document's folder:
"Previous to Version 6.0. The file system directory used to physically
store a user's common repository of documents. A typical path is
C:\Documents and Settings\username\My Documents. This should be
distinguished from the virtual My Documents folder in the namespace. To
access that virtual folder, use SHGetFolderLocation, which returns the
ITEMIDLIST for the virtual location, or refer to the technique described
in Managing the File System."
1) it didn't print the error to the console, only this:
build_res_file(["platform/windows/godot_res.windows.tools.32.o"], ["platform/windows/godot_res.rc"])
scons: *** [platform/windows/godot_res.windows.tools.32.o] Error 1
I had to print the actual command and run it on a console to see the error. The builder should be able to print the command it's running and the error, like it does with compiler invocations, etc.
2) The actual error was a syntax error on line 11 of godot_res.rc. I looked up "FILEVERSION" and "PRODUCTVERSION" (here https://msdn.microsoft.com/en-us/library/windows/desktop/aa381058(v=vs.85).aspx), it says they take 4 numbers as parameters, so I added those 0s, but I'm not sure if they're in the right order.
@masoudbh3 can you check it out? thanks
It builds on msvc just fine with (and without) these changes.
This is achieved using the "no specific formatting" \E[0m tag.
Fixes#2566.
Also remove the hardcoded black background colour and use default bolded terminal font for error message.
Error logs should now look good both on terminals with a dark and light background colour.
Previously all types of errors would be shown as ERROR, thus making for example warnings (WARN_PRINT) somewhat aggressive.
ERROR is displayed in red, WARNING in yellow and SCRIPT ERROR in magenta (though the latter does not seem used so far).
Fixes#1127.
add version_info and icon sections in "export to windows platform".
add version_info and icon to godot exe file (editor & template exe).
fix an problem in image class.
change all default icons to android export icon (a little more rounded).
create an python script for convert file to cpp byte array for use in
'splash.h'.
Added support for 2D shadow casters.
*DANGER* Shaders in CanvasItem CHANGED, if you are using shader in a
CanvasItem and pull this, you will lose them. Shaders now work through a
2D material system similar to 3D. If you don't want to lose the 2D
shader code, save the shader as a .shd, then create a material in
CanvasItem and re-assign the shader.
- fixes issue #1298 : under windows, too long `ar` command lines are split into several smaller command lines.
- fixes issue #1285 : under linux, cross compiling with Mingw-w64 now generates actual 64bits EXE.
- `MINGW32_PREFIX` and `MINGW64_PREFIX` environment variables are also available for Windows.
- started to clean-up the remains of previous hacks and workarounds.
- added some documentation into the script.
-can warp now from viewport and control, in their respective coordinate
systems
-warp is now local to the window on Windows and OSX.
IF YOU RUN OSX, PLEASE TEST THIS! And make sure it works!, new code is
in OS_OSX::warp_mouse_pos. I don't have OSX so i can't test!
This patch removes modifiers when processing key events for the
particular modifier key. For example, previously a Shift keypress
would register as a Shift + Shift modifier event.
This would cause issues when a modifier key as the action key in
the input map, because unpresses of the modifier key don't match as
matching inputs for that action. E.g. if Shift is used as an action,
the stored action event is Shift + Shift modifier (as indicated
in the editor as "Shift + Shift". The unpress event does not have the
Shift modifier set, so the event of unpressing Shift + no modifier
doesn't match the action which has the modifier set.
This patch removes the shift modifier on just pressing the Shift
key down, so the action event is registered as just Shift with
no modifier (as indicated in the editor as "Shift"), which matches
the unpress event.
-=-=-=-=-=-=-=-=-=-
-Moved drawing code to a single function that takes linked list (should make it easier to optimize in the future).
-Implemented Z ordering of 2D nodes. Node2D and those that inherit have a visibility/Z property that affects drawing order (besides the tree order)
-Removed OpenGL ES 1.x support. Good riddance!
-=-=-=-=-=-=-=-=-=-
-Massive improvement to code completion
-Argument hinting for functions
If you manage to out-smart the code-completion in a situation where completion
should be possible to guess, let me know.
Please enter the commit message for your changes. Lines starting
-=-=-=-=-
Curse the day I decided to port UDP code, as it ended up
being two nights of work. At least It's done now (I hope).
-Fixed UDP Support, API seems stable
-Added UDP Chat demo (chat that can lose your packets, heh)
-Added helpers to areas and bodies to get list of collided bodies and contained bodies.
-Sped up screen/viewport capture code.
-Added code to save an image as PNG
-Small fix so scripts register their singletons after modules did.
-=-=-=-=-
-Fixed problem with scaling shapes (#827), related to not taking scale in consideration for calculating the moment of inertia
-Added support for multiline strings (or comments) using """
-Save subscene bug, properties not being saved in root node (#806)
-Fix Crash in CollisionPolygon2DEditor (#814)
-Restored Ability to compile without 3D (#795)
-Fix InterpolatedCamera (#803)
-Fix UV Import for OBJ Meshes (#771)
-Fixed issue with modifier gizmos (#794)
-Fixed CapsuleShape gizmo handle (#50)
-Fixed Import Button (not properly working in 3D) (#733)
-Many misc fixes (though no new features)
-Fixed many bugs in stretch mode
-Fixes to camera project and unproject as consequence of the above
-added setget to script (documented in script doc)
-more fixes to collada exporter for blender
-=-=-=-=-=-=-=-=-=-=
Build System:
-Big clean up of SCons, changed how builds are done to a much cleaner method (check the Github Wiki for instructions).
-Deactivated BlackBerry10 (sorry), if no mantainer found (or BlackBerry does not send us a Passort ;), platform will be removed as we have no longer devices to test.
Engine:
-Removed deprecated object and scene format (was in there just for compatibility, not in use since a long time).
-Added ability to open scenes even if a node type was removed (will try to guess the closest type).
-Removed deprecated node types.
-WorldEnvironment cleanup issues fixed (#563)
-Text Editor improvement to shift-mouse selection (#648)
-(Hopefully) fixed rare (but horrible) indexing bug in GDScript compiler (#652)
-Some changes to PhysicsBody API, renamed property "active" to "sleeping", which makes more sense
-Added add_collision_exception() API in PhysicsBody (more accessible)
-ability to select and copy in the output messages panel
- added #660, but need help on osx, help please I don't have a mac!
- fixed#667 and #668 (eol detection in comments)
- added #670 (hint when using method without () )
- #672 (default user:// in $HOME/.godot/app_userdata (linux/osx) and $APPDATA/Godot/app_userdata (Windows)
- #676 (draw both tiles and octants in order from top to bottom, left to right )
- #686 (unicode escape sequences work now)
- #702 (was not a bug, but a test was added to see if bodies went too far away)
-=-=-=-=-=-=-=-=-=-=-=-=-=-
3D Physics:
-Fixed "Bounce" parameter in 3D
-Fixed bug affecting Area (sometims it would not detect properly)
-Vehicle Body has seen heavy work
-Added Query API for doing space queries in 3D. Needs some docs though.
-Added JOINTS! Adapted Bullet Joints: and created easy gizmos for setting them up:
-PinJoint
-HingeJoint (with motor)
-SliderJoint
-ConeTwistJoint
-Generic6DOFJoint
-Added OBJECT PICKING! based on the new query API. Any physics object now (Area or Body) has the following signals and virtual functions:
-input_event (mouse or multitouch input over the body)
-mouse_enter (mouse entered the body area)
-mouse_exit (mouse exited body area)
For Area it needs to be activated manually, as it isn't by default (ray goes thru).
Other:
-Begun working on Windows 8 (RT) port. Compiles but does not work yet.
-Added TheoraPlayer library for improved to-texture and portable video support.
-Fixed a few bugs in the renderer, collada importer, collada exporter, etc.
-=-=-=-=-=-=-=-=-=-=-=-=-=
-New Vehicle (Based on Bullet's RaycastVehicle) - Vehiclebody/VehicleWheel. Demo will come soon, old vehicle (CarBody) will go away soon too.
-A lot of fixes to the 3D physics engine
-Added KinematicBody with demo
-Fixed the space query API for 2D (demo will come soon). 3D is WIP.
-Fixed long-standing bug with body_enter/body_exit for Area and Area2D
-Performance variables now includes physics (active bodies, collision pairs and islands)
-Ability to see what's inside of instanced scenes!
-Fixed Blend Shapes (no bs+skeleton yet)
-Added an Android JavaClassWrapper singleton for using Android native classes directly from GDScript. This is very Alpha!
-=-=-=-=-=-=-=-=-=-=-=-=-=
-Begin work on Navigation Meshes (simple pathfinding for now, will improve soon)
-More doc on theme overriding
-Upgraded OpenSSL to version without bugs
-Misc bugfixes
-=-=-=-=-=-=-=-=-=-=-=-=-=-=
-Auto indenter in code editor, this makes it much easier to paste external code.
-Zoom in 2D viewport now uses the mouse pointer as reference.
-Obscure hack to see where code/line of GDScript in C++ backtrace.
-Fixed a bug where keys would get stuck on X11 if pressed simultaneously
-Added Api on IP singleton to request local IPs.
-Premultiplied alpha support when importing texture, editing PNGs and as a blend mode.
Previously builds for 64 Bit targets on the x64 Native Tools Command
Prompt failed while trying to link the 64Bit build godot objects with
32Bit vc libraries. This was due to wrong library directories.
Since there are the environment variables INCLUDE and LIB which are
containing the correct paths this patch uses those now to fix the linking
issue.
Signed-off-by: Vinzenz Feenstra <evilissimo@gmail.com>
-made GUI Theme editor usable
-editor does not allow to export or create .pck in the same path as a project
-changed .pck format (lacked support for versioning so couldn't change it), previous was causing crashes and is now incompatible, just re-export.
-will not look for .pck files recursively, was causing unexpected behaviors
-fixed execution of Godot in paths with non unicode characters in Windows, OSX and Linux.
-fixed TouchScreenButton with stretch2d
-fixed(?) OSX crash on startup (test!!)
-compilation fixes on windows
-CollisionPolygon editor works again
-find buttons en find dialog
-TileMap editor cleanup (removed "error", made nicer)
-viewport flicker fixed
-make .scn default extension for saving scenes
-export the rest of the network classes to gdscript
