* Safe and unsafe motion are calculated by dichotomy with a limited
number of steps. It's good for performance, but on long motions that
either collide near the beginning or near the end, the result can be
very imprecise.
* Now a factor 0.25 or 0.75 is used to converge faster when this case
happens, which allows longer motions to get more accurate collision
detection.
* Makes snap collision more precise, and helps with cases where diagonal collision on the border of a platform can lead to the character being stuck.
Additional improvements to move_and_slide:
* Handle slide canceling in move_and_collide with 0 velocity instead of
not applying it.
* Better handling of snap with custom logic to cancel sliding.
* Remove small jittering when using stop on slope, by canceling the
motion completely when the resulting motion is less than margin instead
of always projecting to the up direction (in both body motion and snap).
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
Make sure the direction of the motion is preserved, unless the depth is
higher than the margin, which means the body needs depenetration in any
direction.
Also changed move_and_slide to avoid sliding on the first motion, in
order to avoid issues with unstable position on ground when jumping.
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
- Specular can now be set above 1.0.
- Some properties now allow more precise values.
- The Bake Mode property hint was changed to be more descriptive.
- The maximum shadow bias values were adjusted to follow the property
hints in `master`.
It turned out the new autolinking feature was linking portals AFTER the static meshes had been added to rooms in the PortalRenderer. This meant that large meshes weren't being sprawled across these portals. The fix involves doing the autolinking BEFORE adding the static meshes.
Fixes a bug in the warning for portals being in the wrong direction, they should have only been checkout for outgoing portals. This was resulting in erroneous warnings.
Also the room conversion logs are refined to be more compact and informative.
A warning icon is also added in the gizmo for portals where autolink fails.
Fixing by applying the movement in two steps, first the platform
movement, and then the body movement. Plus, add the platform movement
when we are on_wall.
When BlendSpace2D switches animations, it will now correctly
calculate the previous animation position and length and
apply is to the new animation.
(cherry picked from commit bcb1e2b79f)
This prevents setting too large values and crashing the editor.
Very low values are also no longer allowed since they are generally
not detailed enough to represent complex gradients, leading to confusion.
(cherry picked from commit 2c7813385d)
When appending text (either via `set_text()` or by pasting from clipboard),
if the input would make the `LineEdit` exceed its configured `max_length`,
the input text is truncated to fit. The discard part is passed as a parameter
in the `text_change_rejected` signal.
Fixes#33321.
Fixes#41278.
Also cleaned up unimplemented `max_chars` property in `TextEdit`.
Co-authored-by: Tony-Goat <70238376+Tony-Goat@users.noreply.github.com>
(cherry picked from commit 9a1ce8e6c3)
Clean: remove duplicate and interior vertices (uses Bullet algorithm)
Simplify: modify the geometry for further simplification (uses VHACD
algorithm)
In the editor, single convex hull now uses the clean option.
Added a new editor entry to create a simplified convex hull, can be
useful for creating convex hull from highly tessellated triangle meshes.
Specific change for 3.x:
Add support for Vector<Vector3> and PoolVector<Vector3> in the convex hull generator.
The situation when multiple current Camera2Ds were in the scene was not dealt with. This could leave several cameras with their current bool set, and each competing to update the viewport scroll, in a random / accidental fashion.
This PR standardises the rule that the most recent current Camera2D added to the scene tree takes over the current status, and sets all other current cameras in the scene tree to non-current. This makes the bools correct, and also prevents the competition over viewport scroll.
The CylinderMesh generation code handles this special case and
avoids generating the top and bottom faces if their radius is equal
to 0. This improves performance by reducing the number of vertices
to draw.
If both values are set to 0, nothing will be visible but the mesh
generation will still succeed.
This also improves the CylinderMesh class documentation.
(cherry picked from commit b4ed84ba2b)
Regression fix: update_exports is tool only and should be used only in
the editor, otherwise it can cause export variable overrides from
instances to be discarded in favor of the parent's value.
(cherry picked from commit f1587c8a7d)
This is an older, easier to implement variant of CAS as a pure
fragment shader. It doesn't support upscaling, but we won't make
use of it (at least for now).
The sharpening intensity can be adjusted on a per-Viewport basis.
For the root viewport, it can be adjusted in the Project Settings.
Since `textureLodOffset()` isn't available in GLES2, there is no
way to support contrast-adaptive sharpening in GLES2.
A value of 0 rings is valid and results in a non-subdivided cylinder.
Compared to the previous lowest allowed value (1), a value of 0 halves
the triangle count in any cylinder.
This backports the improved RayCast debug drawing functionality
from the `master` branch.
`ArrayMesh.clear_surfaces()` was also backported from the `master`
branch and exposed because the new debug drawing code requires it.
Low zoom values result in unreadable text, but it can still be
useful for previewing purposes.
Eventually, characters could be replaced by rectangles at very low
zoom levels to improve the visual appearance.
(cherry picked from commit 74c584472c)
The default value is 80. The hard line length guideline's default column
has been moved to 100 to account for the new soft line length guideline.
It can be disabled by setting its value to the same column as the
hard line length guideline.
1. Backport sub-resource cache fixes from master.
Uses a cache by index to keep sub resource indices consistent.
2. The subindex within Resource wasn't synchronized with the path stored in cache when saving a packed scene. It could cause
sub-resources to be swapped when loading the same packed scene in
the same session.
Now the subindex in Resource reflects the sub-resource path in cache,
making saving and loading sub-resources consistent.
Co-authored-by: latorril <latorril@gmail.com>
Calculating the width for 100 items takes a millisecond in
a debug build on an i7-6700K. It's likely that the editor can remain
smooth even with 1,000 items, especially in a release build.
Although the visibility enabler worked to turn on and off AnimationPlayer as it enters and exits the view frustum, this was of little use as bones animation and especially software skinning still take place driven by the AnimationTree node.
This PR adds the ability to turn on and off AnimationTree, and AnimationTreePlayer nodes as they enter or exit the view frustum, which achieves the intention of switching off expensive animation processing.
DynamicFont kerning was removed in
a9b7843dca.
This readds kerning support and fixes it at the same time.
Co-authored-by: follower <follower@rancidbacon.com>
The new color for screen drawing was chosen to be easier to distinguish
from the 2D viewport limits.
This also makes lines less opaque when the Camera2D has the Current
property enabled. The increased line width is enough to spot the
camera easily, and the increased opacity on top of that felt obnoxious.
(cherry picked from commit 8e2a7fff1d)
The code is based on the current version of thirdparty/vhacd and modified to use Godot's types and code style.
Additional changes:
- backported and extended PagedAllocator to allow leaked objects
- applied patch from https://github.com/bulletphysics/bullet3/pull/3037
This changes the types of a big number of variables.
General rules:
- Using `uint64_t` in general. We also considered `int64_t` but eventually
settled on keeping it unsigned, which is also closer to what one would expect
with `size_t`/`off_t`.
- We only keep `int64_t` for `seek_end` (takes a negative offset from the end)
and for the `Variant` bindings, since `Variant::INT` is `int64_t`. This means
we only need to guard against passing negative values in `core_bind.cpp`.
- Using `uint32_t` integers for concepts not needing such a huge range, like
pages, blocks, etc.
In addition:
- Improve usage of integer types in some related places; namely, `DirAccess`,
core binds.
Note:
- On Windows, `_ftelli64` reports invalid values when using 32-bit MinGW with
version < 8.0. This was an upstream bug fixed in 8.0. It breaks support for
big files on 32-bit Windows builds made with that toolchain. We might add a
workaround.
Fixes#44363.
Fixesgodotengine/godot-proposals#400.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
Fix a bug that occour when there are hidden tabs in tab_container.
The visualization isn't correct due to missing values in tab_widths array.
(cherry picked from commit e7e7aa7d12)
Decide whether half offset should be added based on the value used for calculating the return value of this method.
(cherry picked from commit f1420c7cbf)
This commits adds a new emitter type for particles material
and 3D CPU particles. The new emitter is called "ring"
and it can emit either in a ring or cylinder fashion.
This adds the following properties for the emitter:
1. ring_emitter_axis: the axis along which the ring/cylinder
will be constructed
2. ring_emitter_radius: outer radius of the ring/cylinder
3. ring_emitter_inner_radius: inner radius of the cylinder.
when set to zero, particles will emit in the full volume.
4. ring_emitter_height: height of the ring/cylinder emitter.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
As a bonus, to have consistency between use Beziers and create insert tracks, use Beziers also gets a default via editor settings that is used when the confirmation dialog is disabled, instead of just falling back to creating non-Bezier tracks.
Splits the URL into (scheme, host, port, path).
Supports both literal IPv4 and IPv6.
Strip credentials when present (e.g. http://user:pass@example.com/).
Use that function in both HTTPRequest and WebSocketClient.
(cherry picked from commit 3bb40669d5)
Since we clone the environments to build thirdparty code, we don't get an
explicit dependency on the build objects produced by that environment.
So when we update thirdparty code, Godot code using it is not necessarily
rebuilt (I think it is for changed headers, but not for changed .c/.cpp files),
which can lead to an invalid compilation output (linking old Godot .o files
with a newer, potentially ABI breaking version of thirdparty code).
This was only seen as really problematic with bullet updates (leading to
crashes when rebuilding Godot after a bullet update without cleaning .o files),
but it's safer to fix it everywhere, even if it's a LOT of hacky boilerplate.
(cherry picked from commit c7b53c03ae)
We've been using standard C library functions `memcpy`/`memset` for these since
2016 with 67f65f6639.
There was still the possibility for third-party platform ports to override the
definitions with a custom header, but this doesn't seem useful anymore.
Backport of #48239.
Fix for a regression from software skinning support:
instance_attach_skeleton wasn't called in set_mesh before, and it's
causing issues when the mesh instance is loaded from a thread.
1. Call from a thread queues instance_attach_skeleton with RID() in the
visual server.
2. Call from the main thread when entering tree calls
instance_attach_skeleton immediately with a valid skeleton
3. Queued instance_attach_skeleton resets the attached skeleton
This change prevents that to happen by making sure
instance_attach_skeleton is not called on set_mesh as it was doing
before, but there might be a more general problem to solve in how
visual server commands are executed when resources are loaded from
a different thread.
* Better handling of the scene's environment energy in the lightmapper
bakes.
* Fixed a bug where ProceduralSky::get_panorama() returned a reference
instead of a copy.
* Removed includes to Embree's internal header files.
MeshInstance added as child nodes for CollisionObject debug shapes can
be invalidated while deleting the collision object (child nodes are
deleted first), which caused accesses to invalid memory in
shape_owner_remove_shape that lead to random crashes.
Also optimized accesses to shapes to avoid copy-on-write on each
iteration.
Minimap size couldn't be resized back after been resized bigger than GraphEdit cause the grabber was out of GraphEdit.
This commit prevents resizing minimap bigger than GraphEdit and fix this issue.
(cherry picked from commit 045f55ec00)
There was a specific case where the node path wasn't checked for
validity before trying to access the attachment node.
It could cause lots of error log noise in both editor and game.
When AnimatedSprite2D::play() was called before SpriteFrames has been initialized, a crach occurred (issue #46013).
Modification : An error message on null check test has been added to prevent crash.
Fix#46013.
(cherry picked from commit 324ab63844)
If the editor was started with --debug-collisions, 3d shapes were
displayed twice, both with the gizmo and debug shapes. Some shapes could
also persist after being removed due to the usage of queue_free() to
destroy the debug shapes.
When creating a Windows folder via a Godot's dialog, the extra spaces are not removed which causes problems with Windows. We now remove leading and trailing whitespace when creating a dir.
(cherry picked from commit c8538153b0)
My mistake when cherry-picking #46699 with f8ee8b1b73,
I forgot to amend the cherry-pick to change 'offsets' back to 'margins' for the 3.2
branch.
Fixes#46979.
- Fix objects with no material being considered as fully transparent by the lightmapper.
- Added "environment_min_light" property: gives artistic control over the shadow color.
- Fixed "Custom Color" environment mode, it was ignored before.
- Added "interior" property to BakedLightmapData: controls whether dynamic capture objects receive environment light or not.
- Automatically update dynamic capture objects when the capture data changes (also works for "energy" which used to require object movement to trigger the update).
- Added "use_in_baked_light" property to GridMap: controls whether the GridMap will be included in BakedLightmap bakes.
- Set "flush zero" and "denormal zero" mode for SSE2 instructions in the Embree raycaster. According to Embree docs it should give a performance improvement.
* Removed the pointers to PhysicalBone in the code, as they were unused.
* Forward ported the SkeletonIK bone scaling fix I made from Godot 3.2 to Godot 4.0.
* Fixed issue where the root bone in the IK chain would not rotate correctly.
* The issue turned out to be the update_chain function being called in solve. This would override the root bone transform incorrectly and that would cause it not to rotate after just a single solve. Removing the update_chain function fixes the issue and based on my testing there are no adverse effects.
* While the old fix on this PR (prior to a force push) required a hack fix, this new fix does not!
* Removed the update_chain function. This change doesn't appear to have any adverse effects in any of the projects I tested (including with animations, Skeleton3D or otherwise, from AnimationPlayer nodes!)
* Fixed issue where the scale of the Skeleton node would change the position of the target, causing it not to work with skeletons that have a global scale of anything but 1.
(cherry picked from commit a622649876)
