Each file in Godot has had multiple contributors who co-authored it over the
years, and the information of who was the original person to create that file
is not very relevant, especially when used so inconsistently.
`git blame` is a much better way to know who initially authored or later
modified a given chunk of code, and most IDEs now have good integration to
show this information.
Always build with the GUI subsystem.
Redirect stdout and stderr output to the parent process console.
Use CreateProcessW for blocking `execute` calls with piped stdout and stderr (prevent console windows for popping up when used with the GUI subsystem build, and have more consistent behavior with `create_process`).
Add `open_console` argument to the `execute` and `create_process` to open a new console window.
Remove `interface/editor/hide_console_window` editor setting.
Remove `Toggle System Console` menu option.
Remove `set_console_visible` and `is_console_visible` functions.
Only Vulkan is fully implemented for now, so OpenGL isn't available
in the project manager yet.
This also makes the rendering driver checks use lowercase names
everywhere for consistency.
- Rename OpenGL to GLES3 in the source code per community feedback.
- The renderer is still exposed as "OpenGL 3" to the user.
- Hide renderer selection dropdown until OpenGL support is more mature.
- The renderer can still be changed in the Project Settings or using
the `--rendering-driver opengl` command line argument.
- Remove commented out exporter code.
- Remove some OpenGL/DisplayServer-related debugging prints.
First implementation with Linux display manager.
- Add single-threaded mode for EditorResourcePreview (needed for OpenGL).
Co-authored-by: clayjohn <claynjohn@gmail.com>
Co-authored-by: Fabio Alessandrelli <fabio.alessandrelli@gmail.com>
Sets `AlignOperands` to `DontAlign`.
`clang-format` developers seem to mostly care about space-based indentation and
every other version of clang-format breaks the bad mismatch of tabs and spaces
that it seems to use for operand alignment. So it's better without, so that it
respects our two-tabs `ContinuationIndentWidth`.
This will allow adding developer checks which will be fully compiled out in
user builds, unlike `DEBUG_ENABLED` which is included in debug tempates and
the editor builds.
This define is not used yet, but we'll soon add code that uses it, and change
some existing `DEBUG_ENABLED` checks to be performed only in dev builds.
Related to godotengine/godot-proposals#3371.
All Android devices that support Vulkan support 64-bit ARM.
This also removes NEON opt-out code for ARMv7 as pretty much all
ARMv7 devices also support NEON.
This only adds support for a subset of Play Asset Delivery: this causes a single install-time asset pack to always be present, but doesn't add support for dynamically downloaded asset packs.
Doesn't change the default behavior, but allows plugins to add their
view behind the main view, which gives more control over what happens
with inputs and can be useful along with transparent rendering.
This is done by providing API access to app specific directories which don't have any limitations and allows us to bump the target sdk version to 30.
In addition, we're also bumping the min sdk version to 19 as version 18 is no longer supported by Google Play Services and only account of 0.3% of Android devices.
Key, touch and joystick events will be passed directly from the UI thread to Godot, so they can benefit from agile input flushing.
As another consequence of this new way of passing events, less Java object are created at runtime (`Runnable`), which is good since the garbage collector needs to run less.
`AndroidInputHandler` is introduced to have a smaller cross-thread surface. `main_loop_request_go_back()` is removed in favor just inline calling `send_window_event()` at the most caller's convenience (i.e., leveraging the new `p_deferred`` parameter as appropriate).
Lastly, `get_mouse_position()` and `get_mouse_button_state()` now just call through `Input` to avoid the need of sync of mouse data tracked on the UI thread.
Input buffering is implicitly used by event accumulation, but this commit makes it more generic so it can be enabled for other uses.
For desktop OSs it's currently not feasible given main and UI threads are the same).
- API has been simplified: all events now go through `parse_input_event()`. Whether they are accumulated or not depends on the `use_accumulated_input` flag.
- Event accumulation is now thread-safe (it was not needed so far, but it prepares the ground for the following changes).
- Touch drag events now support accumulation.
This was caused by the fact that a new instance of Godot was created at resume while a previous instance already existed.
The previous instance would then go through its cleanup lifecycle, and would thus attempt to close the entire app, leading to the system to restart the app, thus starting the cycle anew.
The fix involves reusing the previous instance of Godot if one is available instead of creating a new one, as well as giving control to the host activity for how the process should be terminated.
Found via `codespell -q 3 -S ./thirdparty,*.po,./DONORS.md -L ackward,ang,ans,ba,beng,cas,childs,childrens,dof,doubleclick,fave,findn,hist,inout,leapyear,lod,nd,numer,ois,ony,paket,seeked,sinc,switchs,te,uint`
* Added a new macro SNAME() that constructs and caches a local stringname.
* Subsequent usages use the cached version.
* Since these use a global static variable, a second refcounter of static usages need to be kept for cleanup time.
* Replaced all theme usages by this new macro.
* Replace all signal emission usages by this new macro.
* Replace all call_deferred usages by this new macro.
This is part of ongoing work to optimize GUI and the editor.
* If not present, the dialog asks to load build sources from a file.
* The export templates check now also verifies that build sources are installed and skips the template check.
This makes Android development easier.
* This PR adds the ability to disable classes when building.
* For now it's only possible to do this via command like:
`scons disable_classes=RayCast2D,Area3D`
* Eventually, a proper UI will be implemented to create a build config file to do this at large scale, as well as detect what is used in the project.
It can be turned off in the export preset with `package/classify_as_game`.
Upstream definition: https://developer.android.com/guide/topics/manifest/application-element#isGame
> `android:isGame`
>
> Whether or not the application is a game. The system may group together
> applications classifed as games or display them separately from other
> applications.
Also fixes replacing `android:allowBackup` in custom builds.
* Shader compilation is now cached. Subsequent loads take less than a millisecond.
* Improved game, editor and project manager startup time.
* Editor uses .godot/shader_cache to store shaders.
* Game uses user://shader_cache
* Project manager uses $config_dir/shader_cache
* Options to tweak shader caching in project settings.
* Editor path configuration moved from EditorSettings to new class, EditorPaths, so it can be available early on (before shaders are compiled).
* Reworked ShaderCompilerRD to ensure deterministic shader code creation (else shader may change and cache will be invalidated).
* Added shader compression with SMOLV: https://github.com/aras-p/smol-v
- Tweak the setting property hint to be more informative.
- Make the setting a "basic" setting so it appears when Advanced Settings
is disabled.
- Remove redundant orientation setting in the iOS export preset.
The project setting is now used (like on Android).
Projects upgrading from a previous version will have to set the
screen orientation again in the Project Settings if it wasn't set
to the default value ("landscape").
We found that this flag causes this error on PR #48812 which does not add any
fancy inline assembly:
```
/tmp/tile_set-ce236a.s: Assembler messages:
/tmp/tile_set-ce236a.s:34676: Error: selected processor does not support `bfc x0,#32,#32'
clang++: error: assembler command failed with exit code 1 (use -v to see invocation)
```
That flag is mentioned in various errors related to assembler failures on
arm64v8 with Clang from the Android NDK.
It was added in Godot in #6958 when migrating from GCC to Clang, and is indeed
referenced in the NDK's Clang migration guide:
https://android.googlesource.com/platform/ndk/+/master/docs/ClangMigration.md
> Especially for ARM and ARM64, Clang is much stricter about assembler rules
> than GCC/GAS. Use `-fno-integrated-as` if Clang reports errors in inline
> assembly or assembly files that you don't wish to modernize.
We don't get those errors nowadays so it seems the flag is no longer needed.
This changes the types of a big number of variables.
General rules:
- Using `uint64_t` in general. We also considered `int64_t` but eventually
settled on keeping it unsigned, which is also closer to what one would expect
with `size_t`/`off_t`.
- We only keep `int64_t` for `seek_end` (takes a negative offset from the end)
and for the `Variant` bindings, since `Variant::INT` is `int64_t`. This means
we only need to guard against passing negative values in `core_bind.cpp`.
- Using `uint32_t` integers for concepts not needing such a huge range, like
pages, blocks, etc.
In addition:
- Improve usage of integer types in some related places; namely, `DirAccess`,
core binds.
Note:
- On Windows, `_ftelli64` reports invalid values when using 32-bit MinGW with
version < 8.0. This was an upstream bug fixed in 8.0. It breaks support for
big files on 32-bit Windows builds made with that toolchain. We might add a
workaround.
Fixes#44363.
Fixesgodotengine/godot-proposals#400.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
See discussion in #43811, it was only implemented on iOS and even that
implementation was fairly limited. This would best be provided as plugins
for Android and iOS without cluttering the shared OS API.
We've been using standard C library functions `memcpy`/`memset` for these since
2016 with 67f65f6639.
There was still the possibility for third-party platform ports to override the
definitions with a custom header, but this doesn't seem useful anymore.
- Based on C++11's `atomic`
- Reworked `SafeRefCount` (based on the rewrite by @hpvb)
- Replaced free atomic functions by the new `SafeNumeric<T>`
- Replaced wrong cases of `volatile bool` by the new `SafeFlag`
- Platform-specific implementations no longer needed
Co-authored-by: Hein-Pieter van Braam-Stewart <hp@tmm.cx>
-Advanced Settings toggle also hides advanced properties when disabled
-Simplified Advanced Bar (errors were just plain redundant)
-Reorganized rendering quality settings.
-Reorganized miscelaneous settings for clean up.
In addition, add support for scaling and applying filter to the splash screen on Android.
One limitation of the api being used is that the splash screen aspect ratio is not maintained when it's scaled up.
This is what GitHub Actions now provide and they removed the previous 21.3.6528147.
A bit annoying to have our hand forced this way but it's still 21.x so should be good
to upgrade.
Issues addressed:
a) Axis mappings were including virtual mouse axes on NVIDIA Shield TV.
The virtual mouse axes have the same axis numbers as the normal analog stick numbers. This was completely breaking joypad support on NVIDIA Shield TV.
b) Joypads were being tracked in a List with the index in the list being treated as the Godot device id.
If a device were to be removed, any device later in the list would be shifted, potentially causing future events with the shifted joypads to have incorrect IDs according to the Godot engine.
c) Unnecessary events were being sent to the Godot engine.
A check was added (per Joystick) that will prevent sending events for all axes when only a single axis value changed.
A similar check was added for "HATs".
See #45712
- Based on C++11's `thread` and `thread_local`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed (except for the few cases of non-portable functions)
- Simpler for `NO_THREADS`
- Thread ids are now the same across platforms (main is 1; others follow)
The previously used tool, `jarsigner` has been deprecated in favor of `apksigner` which is bundled with the Android SDK.
The logic is refactored accordingly and a few editor settings have been deprecated in the process as they're no longer necessary.
Note: As a side effect, specifying the Android SDK path is now required. The docs will be updated to reflect that change.
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
Since we clone the environments to build thirdparty code, we don't get an
explicit dependency on the build objects produced by that environment.
So when we update thirdparty code, Godot code using it is not necessarily
rebuilt (I think it is for changed headers, but not for changed .c/.cpp files),
which can lead to an invalid compilation output (linking old Godot .o files
with a newer, potentially ABI breaking version of thirdparty code).
This was only seen as really problematic with bullet updates (leading to
crashes when rebuilding Godot after a bullet update without cleaning .o files),
but it's safer to fix it everywhere, even if it's a LOT of hacky boilerplate.
They're now disabled by default, and can be enabled with the command line
argument `--vk-layers`.
When enabled, the errors about them being missing are now warnings, as
users were confused and thought this meant Vulkan is broken for them.
Fix crash in `~VulkanContext` when validation layers are disabled (exposed by
this PR since before they could not be disabled without source modification).
Also moved VulkanContext member initializations to header.
Fixes#37102.
minizip documentation describes tm_mon as expecting the number of months
since January - [0, 11], but the month returned by OS.get_date() is in
the range of [1, 12].
This code currently isn't compiled (and cannot compile).
We plan to re-add OpenGL ES-based renderer(s) in Godot 4.0 alongside Vulkan
(probably ES 3.0, possibly also a low-end ES 2.0), but the code will be quite
different so it's not relevant to keep this old Godot 3.2 code.
The `drivers/gles2` code from the `3.2` branch can be used as a reference for
a potential new implementation.
It's too hard to get compatibility between GNU and BSD sed,
so let's just use perl oneliners.
And improve it to also remove trailing tabs, not just spaces.
Depending on the device implementation, editor actions could be
received with different action ids or not at all for multi-line.
Added a parameter to virtual keyboards to properly handle single-line
and multi-line cases in all situations.
Single-line:
Input type set to text without multiline to make sure actions are sent.
IME options are set to DONE action to force action id consistency.
Multi-line:
Input type set to text and multiline to make sure enter triggers new lines.
Actions are disabled by the multiline flag, so '\n' characters are
handled in text changed callbacks.
Until https://github.com/psf/black/pull/1328 makes it in a stable release,
we have to use the latest from Git.
Apply new style fixes done by latest black.
Disabling virtual keyboard focus adjustement caused get_keyboard_height
to always return 0 because it was calculated when the view is resized.
In order to fix it, a PopupWindow is now created on top of the main view
and is set for focus adjustments so the keyboard size can be calculated
based on this popup without affecting the main view.
Its last use was removed in Godot 3.0, so it no longer makes sense to define.
Also removed `D3D_DEBUG_INFO` for Windows as it's likely a left over from a
long time ago pre-opensourcing when Godot had some form of Direct3D 9 support?
Each driver used to define the (same) project settings values
`audio/mix_rate` and `audio/output_latency`, but the setting names are
not driver specific.
Overriding is still possible via platform tags.
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
Using `clang-tidy`'s `modernize-use-default-member-init` check and
manual review of the changes, and some extra manual changes that
`clang-tidy` failed to do.
Also went manually through all of `core` to find occurrences that
`clang-tidy` couldn't handle, especially all initializations done
in a constructor without using initializer lists.
Part of #33027, also discussed in #29848.
Enforcing the use of brackets even on single line statements would be
preferred, but `clang-format` doesn't have this functionality yet.
It changed name as part of the DisplayServer and input refactoring
in #37317, with the rationale that input no longer goes through the
main loop, so the previous Input singleton now only does filtering.
But the gains in consistency are quite limited in the renaming, and
it breaks compatibility for all scripts and tutorials that access
the Input singleton via the scripting language. A temporary option
was suggested to keep the scripting singleton named `Input` even if
its type is `InputFilter`, but that adds inconsistency and breaks C#.
Fixesgodotengine/godot-proposals#639.
Fixes#37319.
Fixes#37690.
The previous logic used the 'tools' directory within the Android sdk to validate it. That directory was recently deprecated and removed from the Android sdk folder (https://developer.android.com/studio/releases/sdk-tools)
The issue was caused by PR #36906 which changes prevented the generated shared libraries from being stripped.
Since the change is only needed for development (debugging) purposes, it's commented out by default.
With the NDK installed locally, gradle plugin 3.6.0 seems to enforce
a specific older NDK version, and will fail building if you don't have
it installed with:
```
No version of NDK matched the requested version 20.0.5594570.
Versions available locally: 21.0.6113669
```
Upstream issue: https://github.com/gradle/gradle/issues/12440
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
For us, it practically only changes the fact that `A<A<int>>` is now
used instead of the C++03 compatible `A<A<int> >`.
Note: clang-format 10+ changed the `Standard` arguments to fully
specified `c++11`, `c++14`, etc. versions, but we can't use `c++17`
now if we want to preserve compatibility with clang-format 8 and 9.
`Cpp11` is still supported as deprecated alias for `Latest`.
- update gradle plugins versions
- add formatting rules for AndroidManifest and gradle build files
- cleanup java_godot_lib_jni
Note: logic was mostly moved around and no new logic/functionality was added.
Namely, move the drive dropdown to just the left of the path text box and don't include the former
in the latter.
This improves the UX on Windows.
In the UNIX case, since its concept of drives is (ab)used to provide shortcuts to useful paths, its
dropdown is kept at the original location.
Main:
- It's now implemented thanks to `<mutex>`. No more platform-specific implementations.
- `BinaryMutex` (non-recursive) is added, as an alternative for special cases.
- Doesn't need allocation/deallocation anymore. It can live in the stack and be part of other classes.
- Because of that, it's methods are now `const` and the inner mutex is `mutable` so it can be easily used in `const` contexts.
- A no-op implementation is provided if `NO_THREADS` is defined. No more need to add `#ifdef NO_THREADS` just for this.
- `MutexLock` now takes a reference. At this point the cases of null `Mutex`es are rare. If you ever need that, just don't use `MutexLock`.
- Thread-safe utilities are therefore simpler now.
Misc.:
- `ScopedMutexLock` is dropped and replaced by `MutexLock`, because they were pretty much the same.
- Every case of lock, do-something, unlock is replaced by `MutexLock` (complex cases where it's not straightfoward are kept as as explicit lock and unlock).
- `ShaderRD` contained an `std::mutex`, which has been replaced by `Mutex`.
- Renames PackedIntArray to PackedInt32Array.
- Renames PackedFloatArray to PackedFloat32Array.
- Adds PackedInt64Array and PackedFloat64Array.
- Renames Variant::REAL to Variant::FLOAT for consistency.
Packed arrays are for storing large amount of data and creating stuff like
meshes, buffers. textures, etc. Forcing them to be 64 is a huge waste of
memory. That said, many users requested the ability to have 64 bits packed
arrays for their games, so this is just an optional added type.
For Variant, the float datatype is always 64 bits, and exposed as `float`.
We still have `real_t` which is the datatype that can change from 32 to 64
bits depending on a compile flag (not entirely working right now, but that's
the idea). It affects math related datatypes and code only.
Neither Variant nor PackedArray make use of real_t, which is only intended
for math precision, so the term is removed from there to keep only float.
It was initially implemented in #5871 for Godot 3.0, but never really
completed or thoroughly tested for most platforms. It then stayed in
limbo and nobody seems really keen to finish it, so it's better to
remove it in 4.0, and re-add eventually (possibly with a different API)
if there's demand and an implementation confirmed working on all
platforms.
Closes#8770.
Due to the port to Vulkan and complete redesign of the rendering backend,
the `drivers/gles3` code is no longer usable in this state and is not
planned to be ported to the new architecture.
The GLES2 backend is kept (while still disabled and non-working) as it
will eventually be ported to serve as the low-end renderer for Godot 4.0.
Some GLES3 features might be selectively ported to the updated GLES2
backend if there's a need for them, and extensions we can use for that.
So long, OpenGL driver bugs!
-Texture renamed to Texture2D
-TextureLayered as base now inherits 2Darray, cubemap and cubemap array
-Removed all references to flags in textures (they will go in the shader)
-Texture3D gone for now (will come back later done properly)
-Create base rasterizer for RenderDevice, RasterizerRD
Calling `step()` on EditorProgress too often will slow down the
rest of the editor, so it's best avoided. This is also more consistent
with other exporters, as most of them don't report per-file progress
either.
Exporting a 2D project with ~1,100 files to Android now takes
about 10 seconds from a debug editor build instead of 65 seconds.
This closes#30850.
Changed the condition to add a length filter to make it consistent with the documentation (0 means no character limit). Otherwise the default value in LineEdit causes the virtual keyboard to be non-fonctional on Android.
Reverts the following commits:
- c81ec6f26d:
"Exposes capture methods to AudioServer, variable renames for
consistency, added documentation."
- 47c558b98a:
"Expose audio callbacks as signals."
- dabaa11b3c:
"Fix to make sure the capture buffers are deallocated at shutdown.
Silences warnings."
Some documentation improvements were kept for pre-existing methods.
See rationale for reverting these changes in #30468.
- `EditorNavigationMeshGenerator` was being registered as part of the Core API,
even after d3f48f88bb. We must make sure to
set Editor as the current ClassDB API type before creating an instance.
- The `VisualScriptEngineSingleton.constant` property has a property hint string
that's different between tools and non-tools builds. This commit makes the
hint string to no longer be set in `_bind_methods`, and to instead set it in
`_validate_property`. This way it's ignored when calculating the API hash.
- `JavaClassWrapper` is now registered in ClassDB on all platforms,
using a dummy implementation on platforms other than Android.
This fixes API portability between Android and other platforms.
- Updated `--class-db-json` command to ignore non-virtual methods that start
with an underscore (see: 4be87c6016).
- Go up was not working, simplify was used one time too much
- Added GestureHandler
- Added doubleTap to recognize open dir
- Fixed scroll where sometimes the scroll jumped between start and end when pointer was outside or on the edge of the scroll area
I'm barely scratching the surface of the changes needed to make the
--export command line interface easy to use, but this should already
improve things somewhat.
- Streamline `can_export()` templates check in all platforms, checking
first for the presence of official templates, then of any defined
custom template, and reporting on the absence of any.
Shouldn't change the actual return value much which is still true if
either release or debug is usable - we might want to change that
eventually and better validate against the requested target.
- Fix discrepancy between platforms using `custom_package/debug` and
`custom_template/debug` (resp. `release`).
All now use `custom_template`, which will break compatibility for
`export_presets.cfg` with earlier projects (but is easy to fix).
- Use `can_export()` when attempting a command line export and report
the same errors that would be shown in the editor.
- Improve error reporting after a failed export attempt, handling
missing template and invalid path more gracefully.
- Cleanup of unused stuff in EditorNode around the export workflow.
- Improve --export documentation in --help a bit.
Fixes#16949 (at least many of the misunderstandings listed there).
Fixes#18470.
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
Provides access to a MulticastLock.
As specified by the Android API, broadcast/multicast packets may be
filtered on some phones unless the application explicitly acquires
a "MulticastLock".
The description appears when hovering over the one-click-deploy button (top-right). This information helps the user distinguish between their devices if multiple are connected or if the same device is connected by both usb and tcpip (two entries in the list for the same device).
Avoid using adb reverse if deploying with adb tcpip.
This still can fail if the user is attempting to debug over usb and has connected their device over BOTH usb and tcpip. I'm not sure how we would detect that problem in advance though.
A better fix would be to make Godot's export code properly parse the
tag over multiple lines (and maybe even use XMLParser instead of doing
it ad-hoc?).
As for the APK names, we could alternatively pick the first .apk found
in the `debug` and `release` folders without expecting a specific name.
Fixes#32414.
Example: To generate for the `release` build target and for the `armv7`, `arm64v8` and `x86` architectures, run the commands:
```
cd godot
scons -j4 platform=android target=release android_arch=armv7
scons -j4 platform=android target=release android_arch=arm64v8
scons -j4 platform=android target=release android_arch=x86
cd platform/android/java
./gradlew generateGodotTemplates
```
Notes:
- The generated build templates will be located in the `godot/bin` directory (i.e: `android_debug.apk`, `android_release.apk`, `android_source.zip`).
- The gradle command will only generate templates for the target(s) with available native shared libraries. For example, running the commands above will only generate the `android_release.apk` and `android_source.zip` files.
To delete the generated artifacts, the following commands can be used:
```
cd platform/android/java
./gradlew cleanGodotTemplates
```
Fixes#32168.
Previously we were returning all key up and key down messages as unhandled to the OS. This was resulting in crashes on certain keypresses (left cursor), for undetermined reason.
This PR defaults all key up and keydown messages to be returned as handled by Godot, except those explicitly coded as exceptions (currently volume keys only).
This fades out messages originating from the editor to make messages
printed by the project stand out more.
This also tweaks wording in some editor messages for consistency.
The application module `app` serves double duties of providing the prebuilt Godot binaries ('android_debug.apk', 'android_release.apk') and the Godot custom build template ('android_source.zip').
The language didn't make it clear that it's installing a *source* template
to the project folder, for later use when compiling custom APKs.
Fixes#28736.
It does check its permission every `vibrate_handheld()` calls.
Vibrate permission is added by checking it on export settings.
And there are some changes for deprecated method.
It had been synced with style changes (spaces -> tabs), not sure why
I accepted to merge it this way back then...
Synced with eb57657f66,
same as before.
Custom-changes will be reapplied in the next commit, if relevant.
So far we left most temporary files lying around, so this attempts to
fix that.
I added a helper method to DirAccess to factor out the boilerplate of
creating a DirAccess, checking if the file exists, remove it or print
an error on failure.
As of 3.1 and later, we have too many thirdparty C++ dependencies
and some internal uses of `new` and `delete` too for it to make
sense to build without the STL on Android.
The option has been broken since 3.0, and the "System STL" that we
relied on for basic support of `new` and `delete` is likely to be
dropped from the NDK:
https://android.googlesource.com/platform/ndk/+/ndk-release-r20/docs/BuildSystemMaintainers.md#System-STL
For clarity, assign-to-release idiom for PoolVector::Read/Write
replaced with a function call.
Existing uses replaced (or removed if already handled by scope)
It's the recommended way to set those, and is more portable
(automatically prepends -D for GCC/Clang and /D for MSVC).
We still use CPPFLAGS for some pre-processor flags which are not
defines.
Fixes#17004
Currently the keydown and keyup messages are handled with method like this:
if ((source & InputDevice.SOURCE_JOYSTICK) == InputDevice.SOURCE_JOYSTICK
|| (source & InputDevice.SOURCE_DPAD) == InputDevice.SOURCE_DPAD
|| (source & InputDevice.SOURCE_GAMEPAD) == InputDevice.SOURCE_GAMEPAD) {
// joystick input
}
else
{
// keyboard input
}
The constant for SOURCE_DPAD is 513
10 0000 0001
and the constant for SOURCE_KEYBOARD is 257
1 0000 0001
However, rather confusingly, for many keyboards the source sent by android is 769
11 0000 0001
Thus the keyboard is passing the check as being a DPAD and being processed as a joystick rather than keyboard. This PR handles the specific case of 769, allowing input from physical keyboards.
This is a new singleton where camera sources such as webcams or cameras on a mobile phone can register themselves with the Server.
Other parts of Godot can interact with this to obtain images from the camera as textures.
This work includes additions to the Visual Server to use this functionality to present the camera image in the background. This is specifically targetted at AR applications.
It's not necessary, but the vast majority of calls of error macros
do have an ending semicolon, so it's best to be consistent.
Most WARN_DEPRECATED calls did *not* have a semicolon, but there's
no reason for them to be treated differently.
text=auto works well in Git 2.10+ but it's broken in previous versions,
which are still used in production on e.g. Ubuntu 16.04 LTS.
Also fix a couple missed text files with CRLF terminators.
.bat files likely require it to be processed properly on Windows,
but core.autocrlf should take care of converting them on the fly
when checking out on Windows.
Those were disable to keep size small, and on Android avoid the dependency on the STL,
but for tools build (editor) this is not really a concern.
Note: as of today it's not possible to build tools=yes for those platforms, but this
change is one of the necessary steps to enable it.
Fixes#25262.
Reasoning: ID is not an acronym, it is simply short for identification, so it logically should not be capitalized. But even if it was an acronym, other acronyms in Godot are not capitalized, like p_rid, p_ip, and p_json.
Include paths are processed from left to right, so we use Prepend to
ensure that paths to bundled thirdparty files will have precedence over
system paths (e.g. `/usr/include` should have lowest priority).
Many contributors (me included) did not fully understand what CCFLAGS,
CXXFLAGS and CPPFLAGS refer to exactly, and were thus not using them
in the way they are intended to be.
As per the SCons manual: https://www.scons.org/doc/HTML/scons-user/apa.html
- CCFLAGS: General options that are passed to the C and C++ compilers.
- CFLAGS: General options that are passed to the C compiler (C only;
not C++).
- CXXFLAGS: General options that are passed to the C++ compiler. By
default, this includes the value of $CCFLAGS, so that setting
$CCFLAGS affects both C and C++ compilation.
- CPPFLAGS: User-specified C preprocessor options. These will be
included in any command that uses the C preprocessor, including not
just compilation of C and C++ source files [...], but also [...]
Fortran [...] and [...] assembly language source file[s].
TL;DR: Compiler options go to CCFLAGS, unless they must be restricted
to either C (CFLAGS) or C++ (CXXFLAGS). Preprocessor defines go to
CPPFLAGS.
It seems to stay compatible with formatting done by clang-format 6.0 and 7.0,
so contributors can keep using those versions for now (they will not undo those
changes).
GLES2 is not designed to be a drop-in replacement for the GLES3 backend,
so the fallback mode has to be used knowingly. It *can* make sense for
simple projects which make sure to handle the differences between both
rendering backends, but most users should stick to one supported backend.
By making it opt-in, we can now use this parameter to define whether to
export ETC textures to Android and iOS when using GLES3 + Fallback.
When using GLES3 without Fallback on Android, set the proper min GLES
version in the AndroidManifest.
Also made the option boolean and renamed it for clarity and to avoid
conflict with the previous String option (which would always evaluate as
"true" otherwise).
Fixes#26569.
For HTML5, we need to support S3TC if running on desktop,
and ETC or ETC2 for mobile, so make this explicit.
Add logic to check for ETC2 support on GLES3,
and remove incorrect ETC feature for GLES3 on Android.
Fix ETC check invalidating templates on HTML5.
Fixes#26476.
Also drop some unused files.
Renamed:
- `platform/iphone/sem_iphone.h` -> `semaphore_iphone.h`
(same for `osx`)
- `platform/uwp/gl_context_egl.h` -> `context_egl_uwp.h`
- in `platform/windows`: `context_gl_win.h`, `crash_handler_win.h`,
`godot_win.cpp`, `joypad.h` and `key_mapping_win.h` all renamed to
use `windows`. Some classes renamed accordingly too.
- `EditorExportAndroid` and `EditorExportUWP` renamed to
`EditorExportPlatformAndroid` and `EditorExportPlatformUWP`
- `power_android` and `power_osx` renamed to `PowerAndroid` and
`PowerOSX`
- `OSUWP` renamed to `OS_UWP`
Dropped:
- `platform/windows/ctxgl_procaddr.h`
From August 1, 2019, Google Play requires that all new apps and app updates
include 64-bit versions, so we enable ARM64 by default.
IINM support for x86 and x86_64 is still be optional, so not enabling them
out of the box.
Part of #25030.
Godot supports many different compilers and for production releases we
have to support 3 currently: GCC8, Clang6, and MSVC2017. These compilers
all do slightly different things with -ffast-math and it is causing
issues now. See #24841, #24540, #10758, #10070. And probably other
complaints about physics differences between release and release_debug
builds.
I've done some performance comparisons on Linux x86_64. All tests are
ran 20 times.
Bunnymark: (higher is better)
(bunnies) min max stdev average
fast-math 7332 7597 71 7432
this pr 7379 7779 108 7621 (102%)
FPBench (gdscript port http://fpbench.org/) (lower is better)
(ms)
fast-math 15441 16127 192 15764
this pr 15671 16855 326 16001 (99%)
Float_add (adding floats in a tight loop) (lower is better)
(sec)
fast-math 5.49 5.78 0.07 5.65
this pr 5.65 5.90 0.06 5.76 (98%)
Float_div (dividing floats in a tight loop) (lower is better)
(sec)
fast-math 11.70 12.36 0.18 11.99
this pr 11.92 12.32 0.12 12.12 (99%)
Float_mul (multiplying floats in a tight loop) (lower is better)
(sec)
fast-math 11.72 12.17 0.12 11.93
this pr 12.01 12.62 0.17 12.26 (97%)
I have also looked at FPS numbers for tps-demo, 3d platformer, 2d
platformer, and sponza and could not find any measurable difference.
I believe that given the issues and oft-reported (physics) glitches on
release builds I believe that the couple of percent of tight-loop
floating point performance regression is well worth it.
This fixes#24540 and fixes#24841
- The `cpu-features.{c,h}` code was only used by chance by the webm
(libvpx) code, so I moved it there. It was actually introduced before
that and wasn't in use, and libvpx just happened to be able to
compile thanks to it being bundled.
It could potentially be compiled on the fly from the Android NDK, but
since we plan to replace the webm module by a GDNative plugin in the
near future, I went the bundling route.
- `ifaddrs_android.h` is already provided in the Android NDK as
`ifaddrs.h`, same as on other Unixes. Yet we cannot use it until we
up the min API level to 24, where `getifaddrs` is first defined.
I moved the files to `thirdparty/misc` and synced them with upstream
WebRTC (only indentation changes and removal of `static` qualifiers).
Also removes dropped thirdparty files from COPYRIGHT.txt after changes
in #24105 and #24145.
Contrarily to what #23434 assumed, this is not a memory leak,
the VisualServerRaster instance is passed as a parameter to
VisualServerWrapMT's constructor.
Fixes#23437.
Fixes the following GCC 5 warnings:
```
core/os/file_access.cpp:49:19: warning: the address of 'FileAccess::create_func' will always evaluate as 'true' [-Waddress]
servers/audio_server.cpp:192:70: warning: comparison with string literal results in unspecified behaviour [-Waddress]
drivers/gles2/rasterizer_storage_gles2.cpp:4095:90: warning: NULL used in arithmetic [-Wpointer-arith]
modules/gdnative/register_types.cpp:237:3: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
platform/android/export/export.cpp:207:1: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
modules/gdscript/gdscript.h:150:67: warning: returning reference to temporary [-Wreturn-local-addr]
servers/physics_2d/collision_object_2d_sw.h:119:56: warning: returning reference to temporary [-Wreturn-local-addr]
servers/physics_2d/collision_object_2d_sw.h:123:56: warning: returning reference to temporary [-Wreturn-local-addr]
servers/physics_2d/collision_object_2d_sw.h:127:50: warning: returning reference to temporary [-Wreturn-local-addr]
servers/physics_2d/collision_object_2d_sw.h:131:52: warning: returning reference to temporary [-Wreturn-local-addr]
editor/plugins/skeleton_editor_plugin.cpp:34:36: warning: extra tokens at end of #include directive
modules/bullet/bullet_types_converter.cpp:31:9: warning: #pragma once in main file
editor/import/editor_scene_importer_gltf.cpp:1996:51: warning: name lookup of 'i' changed
modules/visual_script/visual_script_property_selector.cpp:402:45: warning: name lookup of 'E' changed
scene/gui/tree.cpp:1268:25: warning: name lookup of 'i' changed
scene/resources/visual_shader.cpp:808:32: warning: name lookup of 'i' changed
```
Fixes the following GCC 5 warnings:
```
drivers/gles2/rasterizer_canvas_gles2.cpp:814:8: warning: variable 'rt_size' set but not used [-Wunused-but-set-variable]
drivers/gles2/rasterizer_scene_gles2.cpp:2270:11: warning: variable 'vp_height' set but not used [-Wunused-but-set-variable]
drivers/gles2/rasterizer_scene_gles2.cpp:2673:22: warning: variable 'e' set but not used [-Wunused-but-set-variable]
drivers/gles2/rasterizer_scene_gles2.cpp:715:7: warning: variable 'no_cull' set but not used [-Wunused-but-set-variable]
drivers/gles2/shader_gles2.cpp:693:14: warning: variable 'cc' set but not used [-Wunused-but-set-variable]
drivers/gles3/rasterizer_canvas_gles3.cpp:1226:8: warning: variable 'rt_size' set but not used [-Wunused-but-set-variable]
drivers/gles3/rasterizer_scene_gles3.cpp:3039:10: warning: variable 'contrib' set but not used [-Wunused-but-set-variable]
drivers/gles3/rasterizer_scene_gles3.cpp:4504:32: warning: variable 'vp_height' set but not used [-Wunused-but-set-variable]
editor/editor_inspector.cpp:272:9: warning: variable 'guide_color' set but not used [-Wunused-but-set-variable]
editor/editor_themes.cpp:1067:14: warning: variable 'alpha3' set but not used [-Wunused-but-set-variable]
editor/editor_themes.cpp:263:8: warning: variable 'script_bg_color' set but not used [-Wunused-but-set-variable]
editor/plugins/collision_shape_2d_editor_plugin.cpp:326:11: warning: variable 'cpoint' set but not used [-Wunused-but-set-variable]
editor/plugins/mesh_editor_plugin.cpp:72:9: warning: variable 'size' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:471:12: warning: variable 'mpos' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:89:8: warning: variable 'basetype_color' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:90:8: warning: variable 'type_color' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:92:8: warning: variable 'string_color' set but not used [-Wunused-but-set-variable]
modules/visual_script/visual_script_editor.cpp:2521:7: warning: variable 'seq_connect' set but not used [-Wunused-but-set-variable]
platform/android/export/export.cpp:580:12: warning: variable 'styles_count' set but not used [-Wunused-but-set-variable]
platform/android/export/export.cpp:584:12: warning: variable 'styles_offset' set but not used [-Wunused-but-set-variable]
platform/osx/export/export.cpp:464:9: warning: variable 'zerr' set but not used [-Wunused-but-set-variable]
scene/2d/tile_map.cpp:260:10: warning: variable 'tcenter' set but not used [-Wunused-but-set-variable]
scene/3d/light.cpp:166:7: warning: variable 'editor_ok' set but not used [-Wunused-but-set-variable]
scene/3d/navigation.cpp:566:11: warning: variable 'closest_navmesh' set but not used [-Wunused-but-set-variable]
scene/gui/rich_text_label.cpp:869:8: warning: variable 'size' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:705:14: warning: variable 'xform' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:706:8: warning: variable 'ss' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:726:14: warning: variable 'xform' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:727:8: warning: variable 'ss' set but not used [-Wunused-but-set-variable]
scene/resources/material.cpp:430:7: warning: variable 'using_world' set but not used [-Wunused-but-set-variable]
servers/visual/shader_language.cpp:2026:7: warning: variable 'all_const' set but not used [-Wunused-but-set-variable]
servers/visual/visual_server_scene.cpp:1383:28: warning: variable 'z_max_cam' set but not used [-Wunused-but-set-variable]
```
Also fixes two [-Wunused-value] warnings:
```
scene/gui/text_edit.cpp:4405:20: warning: statement has no effect [-Wunused-value]
servers/visual/visual_server_scene.cpp:905:48: warning: value computed is not used [-Wunused-value]
```
Some of those are bugs and need further work, they are identified with
`// FIXME` comments.
Also turn off -Wsign-compare warnings in the future, we do not consider them important.
Fixes the following GCC 5 warnings:
```
core/node_path.cpp:279:24: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
core/oa_hash_map.h:169:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
core/oa_hash_map.h:314:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/gles2/shader_gles2.cpp:985:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/gles3/rasterizer_storage_gles3.cpp:1075:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/pulseaudio/audio_driver_pulseaudio.cpp:343:34: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/editor_plugin.cpp:525:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/editor_properties_array_dict.cpp:747:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/plugins/spatial_editor_plugin.cpp:2078:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/plugins/spatial_editor_plugin.cpp:4096:27: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/plugins/sprite_editor_plugin.cpp💯20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/cvtt/image_compress_cvtt.cpp:122:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/cvtt/image_compress_cvtt.cpp:134:77: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/cvtt/image_compress_cvtt.cpp:339:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/etc/image_etc.cpp:222:34: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/gdnative/register_types.cpp:242:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/gdnative/register_types.cpp:258:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/opensimplex/simplex_noise.cpp:200:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/opensimplex/simplex_noise.cpp:222:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/opensimplex/simplex_noise.cpp:246:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/android/export/export.cpp:1085:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/android/export/export.cpp:1489:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/android/export/export.cpp:1623:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/iphone/export/export.cpp:206:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/iphone/export/export.cpp:356:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/iphone/export/export.cpp:406:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/iphone/export/export.cpp:493:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/audio_stream_player_3d.cpp:420:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/resources/audio_stream_sample.cpp:565:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/resources/audio_stream_sample.cpp:571:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio/audio_rb_resampler.cpp:156:36: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
```
The following warnings were not fixed, as they implied casting for no gain:
```
core/io/packet_peer.cpp:228:38: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
core/io/resource_format_binary.cpp:109:11: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/gles2/rasterizer_scene_gles2.cpp:144:57: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/unix/file_access_unix.cpp:249:46: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/voxel_light_baker.cpp:889:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/voxel_light_baker.cpp:1020:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/voxel_light_baker.cpp:1154:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/voxel_light_baker.cpp:2255:38: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/resources/bit_mask.cpp:336:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio/audio_stream.cpp:141:49: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio/audio_stream.cpp:150:19: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio/audio_stream.cpp:154:19: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio_server.cpp:86:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio_server.cpp:89:17: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
```
This allows more consistency in the manner we include core headers,
where previously there would be a mix of absolute, relative and
include path-dependent includes.