Spatial Material¶
Introduction¶
SpatialMaterial is a default 3D material that aims to provide most of the features
artists look for in a material, without the need for writing shader code. However,
it can be converted to shader code if additional functionality is needed.
This tutorial explains most parameters present in SpatialMaterial.
There are 4 ways to add a SpatialMaterial to an object. It can be added in
the Material property of the mesh. It can be added in the Material property of
the node using the mesh (such as a MeshInstance node), the Material Override property
of the node using the mesh, and the Material Overlay.
If you add a material to the mesh itself, every time that mesh is used it will have that material. If you add a material to the node using the mesh, the material will only be used by that node, it will also override the material property of the mesh. If a material is added in the Material Override property of the node, it will only be used by that node. It will also override the regular material property of the node and the material property of the mesh.
The Material Overlay property will render a material over the current one being used by the mesh. As an example, this can be used to put a transparent shield effect on a mesh.
Flags¶
Spatial materials have many flags determining the general usage of a material.
Transparent¶
In Godot, materials are not transparent unless specifically configured to be. The main reason behind this is that transparent materials are rendered using a different technique (sorted from back to front and rendered in order).
This technique is less efficient (many state changes happen) and makes the materials unusable with many mid- and post-processing effects (such as SSAO, SSR, etc.) that require perfectly opaque geometry.
For this reason, materials in Godot are assumed opaque unless specified otherwise. The main settings that enable transparency are:
Transparent flag (this one)
Blend mode set to other than "Mix"
Enabling distance or proximity fade
Use Shadow to Opacity¶
Lighting modifies the alpha so shadowed areas are opaque and non-shadowed areas are transparent. Useful for overlaying shadows onto a camera feed in AR.
Unshaded¶
In most cases it is common for materials to be affected by lighting (shaded).
However, in some cases you might want to show just the albedo (color) and ignore the rest. Toggling this flag on will remove all shading and display pure, unlit color.
Vertex Lighting¶
Godot has a more or less uniform cost per pixel thanks to depth pre-pass. All lighting calculations are made by running the lighting shader on every pixel.
As these calculations are costly, performance can be brought down considerably in some corner cases such as drawing several layers of transparency (which is common in particle systems). Switching to per-vertex lighting may help in these cases.
Additionally, on low-end or mobile devices, switching to vertex lighting can considerably increase rendering performance.
Keep in mind that when vertex lighting is enabled, only directional lighting can produce shadows (for performance reasons).
No Depth Test¶
In order for close objects to appear over far away objects, depth testing is performed. Disabling it has the result of objects appearing over (or under) everything else.
Disabling this makes the most sense for drawing indicators in world space, and works very well with the Render Priority property of Material (see the bottom of this page).
Use Point Size¶
This option is only effective when the geometry rendered is made of points (generally it's made of triangles when imported from 3D DCCs). If so, then those points can be resized (see below).
World Triplanar¶
When using triplanar mapping (see below, in the UV1 and UV2 settings), triplanar is computed in object local space. This option makes triplanar work in world space.
Fixed Size¶
This causes the object to be rendered at the same size no matter the distance. This is useful mostly for indicators (no depth test and high render priority) and some types of billboards.
Do Not Receive Shadows¶
Makes the object not receive any kind of shadow that would otherwise be cast onto it.
Disable Ambient Light¶
Makes the object not receive any kind of ambient lighting that would otherwise light it.
Ensure Correct Normals¶
Fixes normals when non-uniform scaling is used.
Vertex Color¶
This setting allows choosing what is done by default to vertex colors that come from your 3D modelling application. By default, they are ignored.
Use as Albedo¶
Choosing this option means vertex color is used as albedo color.
Is sRGB¶
Most 3D DCCs will likely export vertex colors as sRGB, so toggling this option on will help them look correct.
Parameters¶
SpatialMaterial also has several configurable parameters to tweak
many aspects of the rendering:
Diffuse Mode¶
Specifies the algorithm used by diffuse scattering of light when hitting the object. The default is Burley. Other modes are also available:
Burley: Default mode, the original Disney Principled PBS diffuse algorithm.
Lambert: Is not affected by roughness.
Lambert Wrap: Extends Lambert to cover more than 90 degrees when roughness increases. Works great for hair and simulating cheap subsurface scattering. This implementation is energy conserving.
Oren Nayar: This implementation aims to take microsurfacing into account (via roughness). Works well for clay-like materials and some types of cloth.
Toon: Provides a hard cut for lighting, with smoothing affected by roughness. It is recommended you disable sky contribution from your environment's ambient light settings or disable ambient light in the spatial material to achieve a better effect.
Specular Mode¶
Specifies how the specular blob will be rendered. The specular blob represents the shape of a light source reflected in the object.
ShlickGGX: The most common blob used by PBR 3D engines nowadays.
Blinn: Common in previous-generation engines. Not worth using nowadays, but left here for the sake of compatibility.
Phong: Same as above.
Toon: Creates a toon blob, which changes size depending on roughness.
Disabled: Sometimes the blob gets in the way. Begone!
Blend Mode¶
Controls the blend mode for the material. Keep in mind that any mode other than Mix forces the object to go through the transparent pipeline.
Mix: Default blend mode, alpha controls how much the object is visible.
Add: Object is blended additively, nice for flares or some fire-like effects.
Sub: Object is subtracted.
Mul: Object is multiplied.
Cull Mode¶
Determines which side of the object is not drawn when backfaces are rendered:
Back: The back of the object is culled when not visible (default).
Front: The front of the object is culled when not visible.
Disabled: Used for objects that are double-sided (no culling is performed).
Note
By default, Blender has backface culling disabled on materials and will export materials to match how they render in Blender. This means that materials in Godot will have their cull mode set to Disabled. This can decrease performance since backfaces will be rendered, even when they are being culled by other faces. To resolve this, enable Backface Culling in Blender's Materials tab, then export the scene to glTF again.
Depth Draw Mode¶
Specifies when depth rendering must take place.
Opaque Only (default): Depth is only drawn for opaque objects.
Always: Depth draw is drawn for both opaque and transparent objects.
Never: No depth draw takes place (do not confuse this with the No Depth Test option above).
Depth Pre-Pass: For transparent objects, an opaque pass is made first with the opaque parts, then transparency is drawn above. Use this option with transparent grass or tree foliage.
Line Width¶
When drawing lines, specify the width of the lines being drawn. This option is not available on most modern hardware.
Point Size¶
When drawing points, specify the point size in pixels.
Billboard Mode¶
Enables billboard mode for drawing materials. This controls how the object faces the camera:
Disabled: Billboard mode is disabled.
Enabled: Billboard mode is enabled, the object's -Z axis will always face the camera.
Y-Billboard: The object's X axis will always be aligned with the camera.
Particles: Most suited for particle systems, because it allows specifying animation options.
The above options are only enabled for Particle Billboard.
Billboard Keep Scale¶
Enables scaling a mesh in billboard mode.
Grow¶
Grows the object vertices in the direction pointed by their normals:
This is commonly used to create cheap outlines. Add a second material pass, make it black and unshaded, reverse culling (Cull Front), and add some grow:
Use Alpha Scissor¶
When transparency other than 0 or 1 is not needed, it's possible to
set a threshold to prevent the object from rendering semi-transparent pixels.
This renders the object via the opaque pipeline, which is faster and allows it to use mid- and post-process effects such as SSAO, SSR, etc.
Material colors, maps and channels¶
Besides the parameters, what defines materials themselves are the colors, textures, and channels. Godot supports an extensive list of them. They are described in detail below:
Albedo¶
Albedo is the base color for the material, on which all the other settings operate. When set to Unshaded, this is the only color that is visible. In previous versions of Godot, this channel was named Diffuse. The change of name mainly happened because, in PBR (Physically Based Rendering), this color affects many more calculations than just the diffuse lighting path.
Albedo color and texture can be used together as they are multiplied.
Alpha channel in albedo color and texture is also used for the object transparency. If you use a color or texture with alpha channel, make sure to either enable transparency or alpha scissoring for it to work.
Metallic¶
Godot uses a metallic model over competing models due to its simplicity. This parameter defines how reflective the material is. The more reflective, the less diffuse/ambient light affects the material and the more light is reflected. This model is called "energy-conserving".
The Specular parameter is a general amount for the reflectivity (unlike
Metallic, this is not energy-conserving, so leave it at 0.5 and don't touch
it unless you need to).
The minimum internal reflectivity is 0.04, so it's impossible to make a
material completely unreflective, just like in real life.
Roughness¶
Roughness affects the way reflection happens. A value of 0 makes it a
perfect mirror while a value of 1 completely blurs the reflection (simulating
natural microsurfacing). Most common types of materials can be achieved with
the right combination of Metallic and Roughness.
Emission¶
Emission specifies how much light is emitted by the material (keep in mind this does not include light surrounding geometry unless Using GIProbe are used). This value is added to the resulting final image and is not affected by other lighting in the scene.
Normal map¶
Normal mapping allows you to set a texture that represents finer shape detail. This does not modify geometry, only the incident angle for light. In Godot, only the red and green channels of normal maps are used for better compression and wider compatibility.
Note
Godot requires the normal map to use the X+, Y+ and Z+ coordinates, this is known as OpenGL style. If you've imported a material made to be used with another engine it may be DirectX style, in which case the normal map needs to be converted so its Y axis is flipped.
More information about normal maps (including a coordinate order table for popular engines) can be found here.
Rim¶
Some fabrics have small micro-fur that causes light to scatter around it. Godot emulates this with the Rim parameter. Unlike other rim lighting implementations, which just use the emission channel, this one actually takes light into account (no light means no rim). This makes the effect considerably more believable.
Rim size depends on roughness, and there is a special parameter to specify how
it must be colored. If Tint is 0, the color of the light is used for the
rim. If Tint is 1, then the albedo of the material is used. Using
intermediate values generally works best.
Clearcoat¶
This feature is only available when using the GLES3 backend.
The Clearcoat parameter is used to add a secondary pass of transparent coat to the material. This is common in car paint and toys. In practice, it's a smaller specular blob added on top of the existing material.
The effect is extremely subtle in Godot 3 releases, and may require specific lighting or looking at a material a specific way to notice a difference. This can be seen in the image below where clearcoat is turned on in the right.
Note
The effect will be more noticeable in Godot 4.
Anisotropy¶
This feature is only available when using the GLES3 backend.
This changes the shape of the specular blob and aligns it to tangent space. Anisotropy is commonly used with hair, or to make materials such as brushed aluminum more realistic. It works especially well when combined with flowmaps.
Ambient Occlusion¶
It is possible to specify a baked ambient occlusion map. This map affects how much ambient light reaches each surface of the object (it does not affect direct light by default). While it is possible to use Screen-Space Ambient Occlusion (SSAO) to generate ambient occlusion, nothing beats the quality of a well-baked AO map. It is recommended to bake ambient occlusion whenever possible.
Depth¶
This feature is only available when using the GLES3 backend.
Setting a depth map on a material produces a ray-marched search to emulate the proper displacement of cavities along the view direction. This is not real added geometry, but an illusion of depth. It may not work for complex objects, but it produces a realistic depth effect for textures. For best results, Depth should be used together with normal mapping.
Subsurface Scattering¶
This feature is only available when using the GLES3 backend.
This effect emulates light that penetrates an object's surface, is scattered, and then comes out. It is useful to create realistic skin, marble, colored liquids, etc.
Transmission¶
This controls how much light from the lit side (visible to light) is transferred to the dark side (opposite from the light). This works well for thin objects such as plant leaves, grass, human ears, etc.
Refraction¶
This feature is only available when using the GLES3 backend.
When refraction is enabled, it supersedes alpha blending, and Godot attempts to fetch information from behind the object being rendered instead. This allows distorting the transparency in a way similar to refraction in real life.
Remember to use a transparent albedo texture (or reduce the albedo color's alpha channel) to make refraction visible, as refraction relies on transparency to have a visible effect.
A normal map can optionally be specified in the Refraction Texture property to allow distorting the refraction's direction on a per-pixel basis.
Note
Refraction is implemented as a screen-space effect and forces the material to be transparent. This makes the effect relatively fast, but this results in some limitations:
Transparency sorting issues may occur.
The refractive material cannot refract onto itself, or onto other transparent materials. A refractive material behind another transparent material will be invisible.
Off-screen objects cannot appear in the refraction. This is most noticeable with high refraction strength values.
Opaque materials in front of the refractive material will appear to have "refracted" edges, even though they shouldn't.
Detail¶
Godot allows using secondary albedo and normal maps to generate a detail texture, which can be blended in many ways. By combining this with secondary UV or triplanar modes, many interesting textures can be achieved.
There are several settings that control how detail is used.
Mask: The detail mask is a black and white image used to control where the blending takes place on a texture. White is for the detail textures, Black is for the regular material textures, different shades of gray are for partial blending of the material textures and detail textures.
Blend Mode: These four modes control how the textures are blended together.
Mix: Combines pixel values of both textures. At black, only show the material texture, at white, only show the detail texture. Values of gray create a smooth blend between the two.
Add: Adds pixel values of one Texture with the other. Unlike mix mode both textures are completely mixed at white parts of a mask and not at gray parts. The original texture is mostly unchanged at black
Sub: Subtracts pixel values of one texture with the other. The second texture is completely subtracted at white parts of a mask with only a little subtraction in black parts, gray parts being different levels of subtraction based on the exact texture.
Mul: Multiplies the RGB channel numbers for each pixel from the top texture with the values for the corresponding pixel from the bottom texture.
Albedo: This is where you put an albedo texture you want to blend. If nothing is in this slot it will be interpreted as white by default.
Normal: This is where you put a normal texture you want to blend. If nothing is in this slot it will be interpreted as a flat normal map. This can still be used even if the material does not have normal map enabled.
UV1 and UV2¶
Godot supports two UV channels per material. Secondary UV is often useful for ambient occlusion or emission (baked light). UVs can be scaled and offset, which is useful when using repeating textures.
Triplanar Mapping¶
Triplanar mapping is supported for both UV1 and UV2. This is an alternative way to obtain texture coordinates, sometimes called "Autotexture". Textures are sampled in X, Y and Z and blended by the normal. Triplanar mapping can be performed in either world space or object space.
In the image below, you can see how all primitives share the same material with world triplanar, so the brick texture continues smoothly between them.
Proximity and distance fade¶
Godot allows materials to fade by proximity to each other as well as depending on the distance from the viewer. Proximity fade is useful for effects such as soft particles or a mass of water with a smooth blending to the shores. Distance fade is useful for light shafts or indicators that are only present after a given distance.
Keep in mind enabling these enables alpha blending, so abusing them for an entire scene is usually not a good idea.
Render priority¶
The rendering order of objects can be changed, although this is mostly useful for transparent objects (or opaque objects that perform depth draw but no color draw, such as cracks on the floor).