High-level multiplayer

High-level vs low-level API

The following explains the differences of high- and low-level networking in Godot as well as some fundamentals. If you want to jump in head-first and add networking to your first nodes, skip to Initializing the network below. But make sure to read the rest later on!

Godot always supported standard low-level networking via UDP, TCP and some higher level protocols such as SSL and HTTP. These protocols are flexible and can be used for almost anything. However, using them to synchronize game state manually can be a large amount of work. Sometimes that work can't be avoided or is worth it, for example when working with a custom server implementation on the backend. But in most cases, it's worthwhile to consider Godot's high-level networking API, which sacrifices some of the fine-grained control of low-level networking for greater ease of use.

This is due to the inherent limitations of the low-level protocols:

• TCP ensures packets will always arrive reliably and in order, but latency is generally higher due to error correction. It's also quite a complex protocol because it understands what a "connection" is, and optimizes for goals that often don't suit applications like multiplayer games. Packets are buffered to be sent in larger batches, trading less per-packet overhead for higher latency. This can be useful for things like HTTP, but generally not for games. Some of this can be configured and disabled (e.g. by disabling "Nagle's algorithm" for the TCP connection).

• UDP is a simpler protocol, which only sends packets (and has no concept of a "connection"). No error correction makes it pretty quick (low latency), but packets may be lost along the way or received in the wrong order. Added to that, the MTU (maximum packet size) for UDP is generally low (only a few hundred bytes), so transmitting larger packets means splitting them, reorganizing them and retrying if a part fails.

In general, TCP can be thought of as reliable, ordered, and slow; UDP as unreliable, unordered and fast. Because of the large difference in performance, it often makes sense to re-build the parts of TCP wanted for games (optional reliability and packet order), while avoiding the unwanted parts (congestion/traffic control features, Nagle's algorithm, etc). Due to this, most game engines come with such an implementation, and Godot is no exception.

In summary, you can use the low-level networking API for maximum control and implement everything on top of bare network protocols or use the high-level API based on SceneTree that does most of the heavy lifting behind the scenes in a generally optimized way.

Note

Most of Godot's supported platforms offer all or most of the mentioned high- and low-level networking features. As networking is always largely hardware and operating system dependent, however, some features may change or not be available on some target platforms. Most notably, the HTML5 platform currently offers WebSockets and WebRTC support but lacks some of the higher-level features, as well as raw access to low-level protocols like TCP and UDP.

Note

More about TCP/IP, UDP, and networking: https://gafferongames.com/post/udp_vs_tcp/

Gaffer On Games has a lot of useful articles about networking in Games (here), including the comprehensive introduction to networking models in games.

If you want to use your low-level networking library of choice instead of Godot's built-in networking, see here for an example: https://github.com/PerduGames/gdnet3

Warning

Adding networking to your game comes with some responsibility. It can make your application vulnerable if done wrong and may lead to cheats or exploits. It may even allow an attacker to compromise the machines your application runs on and use your servers to send spam, attack others or steal your users data if they play your game.

This is always the case when networking is involved and has nothing to do with Godot. You can of course experiment, but when you release a networked application, always take care of any possible security concerns.

Mid level abstraction

Before going into how we would like to synchronize a game across the network, it can be helpful to understand how the base network API for synchronization works.

Godot uses a mid-level object NetworkedMultiplayerPeer. This object is not meant to be created directly, but is designed so that several C++ implementations can provide it.

This object extends from PacketPeer, so it inherits all the useful methods for serializing, sending and receiving data. On top of that, it adds methods to set a peer, transfer mode, etc. It also includes signals that will let you know when peers connect or disconnect.

This class interface can abstract most types of network layers, topologies and libraries. By default, Godot provides an implementation based on ENet (NetworkedMultiplayerEnet), one based on WebRTC (WebRTCMultiplayer), and one based on WebSocket (WebSocketMultiplayerPeer), but this could be used to implement mobile APIs (for ad hoc WiFi, Bluetooth) or custom device/console-specific networking APIs.

For most common cases, using this object directly is discouraged, as Godot provides even higher level networking facilities. Yet it is made available in case a game has specific needs for a lower level API.

Initializing the network

The object that controls networking in Godot is the same one that controls everything tree-related: SceneTree.

To initialize high-level networking, the SceneTree must be provided a NetworkedMultiplayerPeer object.

To create that object, it first has to be initialized as a server or client.

Initializing as a server, listening on the given port, with a given maximum number of peers:

var peer = NetworkedMultiplayerENet.new()
peer.create_server(SERVER_PORT, MAX_PLAYERS)
get_tree().network_peer = peer

Initializing as a client, connecting to a given IP and port:

var peer = NetworkedMultiplayerENet.new()
peer.create_client(SERVER_IP, SERVER_PORT)
get_tree().network_peer = peer

Get the previously set network peer:

get_tree().get_network_peer()

Checking whether the tree is initialized as a server or client:

get_tree().is_network_server()

Terminating the networking feature:

get_tree().network_peer = null

(Although it may make sense to send a message first to let the other peers know you're going away instead of letting the connection close or timeout, depending on your game.)

Warning

When exporting to Android, make sure to enable the INTERNET permission in the Android export preset before exporting the project or using one-click deploy. Otherwise, network communication of any kind will be blocked by Android.

Managing connections

Some games accept connections at any time, others during the lobby phase. Godot can be requested to no longer accept connections at any point (see set_refuse_new_network_connections(bool) and related methods on SceneTree). To manage who connects, Godot provides the following signals in SceneTree:

Server and Clients:

• network_peer_connected(int id)

• network_peer_disconnected(int id)

The above signals are called on every peer connected to the server (including on the server) when a new peer connects or disconnects. Clients will connect with a unique ID greater than 1, while network peer ID 1 is always the server. Anything below 1 should be handled as invalid. You can retrieve the ID for the local system via SceneTree.get_network_unique_id(). These IDs will be useful mostly for lobby management and should generally be stored, as they identify connected peers and thus players. You can also use IDs to send messages only to certain peers.

Clients:

• connected_to_server

• connection_failed

• server_disconnected

Again, all these functions are mainly useful for lobby management or for adding/removing players on the fly. For these tasks, the server clearly has to work as a server and you have to perform tasks manually such as sending a newly connected player information about other already connected players (e.g. their names, stats, etc).

Lobbies can be implemented any way you want, but the most common way is to use a node with the same name across scenes in all peers. Generally, an autoloaded node/singleton is a great fit for this, to always have access to, e.g. "/root/lobby".

RPC

To communicate between peers, the easiest way is to use RPCs (remote procedure calls). This is implemented as a set of functions in Node:

• rpc("function_name", <optional_args>)

• rpc_id(<peer_id>,"function_name", <optional_args>)

• rpc_unreliable("function_name", <optional_args>)

• rpc_unreliable_id(<peer_id>, "function_name", <optional_args>)

Synchronizing member variables is also possible:

• rset("variable", value)

• rset_id(<peer_id>, "variable", value)

• rset_unreliable("variable", value)

• rset_unreliable_id(<peer_id>, "variable", value)

Functions can be called in two fashions:

• Reliable: when the function call arrives, an acknowledgement will be sent back; if the acknowledgement isn't received after a certain amount of time, the function call will be re-transmitted.

• Unreliable: the function call is sent only once, without checking to see if it arrived or not, but also without any extra overhead.

In most cases, reliable is desired. Unreliable is mostly useful when synchronizing object positions (sync must happen constantly, and if a packet is lost, it's not that bad because a new one will eventually arrive and it would likely be outdated because the object moved further in the meantime, even if it was resent reliably).

There is also SceneTree.get_rpc_sender_id(), which can be used to check which peer (or peer ID) sent an RPC.

Back to lobby

Let's get back to the lobby. Imagine that each player that connects to the server will tell everyone about it.

# Typical lobby implementation; imagine this being in /root/lobby.

extends Node

# Connect all functions

func _ready():
    get_tree().connect("network_peer_connected", self, "_player_connected")
    get_tree().connect("network_peer_disconnected", self, "_player_disconnected")
    get_tree().connect("connected_to_server", self, "_connected_ok")
    get_tree().connect("connection_failed", self, "_connected_fail")
    get_tree().connect("server_disconnected", self, "_server_disconnected")

# Player info, associate ID to data
var player_info = {}
# Info we send to other players
var my_info = { name = "Johnson Magenta", favorite_color = Color8(255, 0, 255) }

func _player_connected(id):
    # Called on both clients and server when a peer connects. Send my info to it.
    rpc_id(id, "register_player", my_info)

func _player_disconnected(id):
    player_info.erase(id) # Erase player from info.

func _connected_ok():
    pass # Only called on clients, not server. Will go unused; not useful here.

func _server_disconnected():
    pass # Server kicked us; show error and abort.

func _connected_fail():
    pass # Could not even connect to server; abort.

remote func register_player(info):
    # Get the id of the RPC sender.
    var id = get_tree().get_rpc_sender_id()
    # Store the info
    player_info[id] = info

    # Call function to update lobby UI here

You might have already noticed something different, which is the usage of the remote keyword on the register_player function:

remote func register_player(info):

This keyword is one of many that allow a function to be called by a remote procedure call (RPC). There are six of them total:

• remote

• remotesync

• puppet

• puppetsync

• master

• mastersync

Each of them designate who can call the rpc, and optionally sync if the RPC can be called locally.

Note

If no rpc keywords are added, Godot will block any attempts to call functions remotely. This makes security work a lot easier (so a client can't call a function to delete a file on another client's system).

The remote keyword can be called by any peer, including the server and all clients. The puppet keyword means a call can be made from the network master to any network puppet. The master keyword means a call can be made from any network puppet to the network master.

If sync is included, the call can also be made locally. For example, to allow the network master to change the player's position on all peers:

puppetsync func update_position(new_position):
    position = new_position

Tip

You can also use SceneTree.get_rpc_sender_id() to have more advanced rules on how an rpc can be called.

These keywords are further explained in Synchronizing the game.

With this, lobby management should be more or less explained. Once you have your game going, you will most likely want to add some extra security to make sure clients don't do anything funny (just validate the info they send from time to time, or before game start). For the sake of simplicity and because each game will share different information, this is not shown here.

Starting the game

Once enough players have gathered in the lobby, the server should probably start the game. This is nothing special in itself, but we'll explain a few nice tricks that can be done at this point to make your life much easier.

Player scenes

In most games, each player will likely have its own scene. Remember that this is a multiplayer game, so in every peer you need to instance one scene for each player connected to it. For a 4 player game, each peer needs to instance 4 player nodes.

So, how to name such nodes? In Godot, nodes need to have a unique name. It must also be relatively easy for a player to tell which node represents each player ID.

The solution is to simply name the root nodes of the instanced player scenes as their network ID. This way, they will be the same in every peer and RPC will work great! Here is an example:

remote func pre_configure_game():
    var selfPeerID = get_tree().get_network_unique_id()

    # Load world
    var world = load(which_level).instance()
    get_node("/root").add_child(world)

    # Load my player
    var my_player = preload("res://player.tscn").instance()
    my_player.set_name(str(selfPeerID))
    my_player.set_network_master(selfPeerID) # Will be explained later
    get_node("/root/world/players").add_child(my_player)

    # Load other players
    for p in player_info:
        var player = preload("res://player.tscn").instance()
        player.set_name(str(p))
        player.set_network_master(p) # Will be explained later
        get_node("/root/world/players").add_child(player)

    # Tell server (remember, server is always ID=1) that this peer is done pre-configuring.
    # The server can call get_tree().get_rpc_sender_id() to find out who said they were done.
    rpc_id(1, "done_preconfiguring")

Note

Depending on when you execute pre_configure_game(), you may need to change any calls to add_child() to be deferred via call_deferred(), as the SceneTree is locked while the scene is being created (e.g. when _ready() is being called).

Synchronizing game start

Setting up players might take different amounts of time for every peer due to lag, different hardware, or other reasons. To make sure the game will actually start when everyone is ready, pausing the game until all players are ready can be useful:

remote func pre_configure_game():
    get_tree().set_pause(true) # Pre-pause
    # The rest is the same as in the code in the previous section (look above)

When the server gets the OK from all the peers, it can tell them to start, as for example:

var players_done = []
remote func done_preconfiguring():
    var who = get_tree().get_rpc_sender_id()
    # Here are some checks you can do, for example
    assert(get_tree().is_network_server())
    assert(who in player_info) # Exists
    assert(not who in players_done) # Was not added yet

    players_done.append(who)

    if players_done.size() == player_info.size():
        rpc("post_configure_game")

remote func post_configure_game():
    # Only the server is allowed to tell a client to unpause
    if 1 == get_tree().get_rpc_sender_id():
        get_tree().set_pause(false)
        # Game starts now!

Synchronizing the game

In most games, the goal of multiplayer networking is that the game runs synchronized on all the peers playing it. Besides supplying an RPC and remote member variable set implementation, Godot adds the concept of network masters.

Network master

The network master of a node is the peer that has the ultimate authority over it.

When not explicitly set, the network master is inherited from the parent node, which if not changed, is always going to be the server (ID 1). Thus the server has authority over all nodes by default.

The network master can be set with the function Node.set_network_master(id, recursive) (recursive is true by default and means the network master is recursively set on all child nodes of the node as well).

Checking that a specific node instance on a peer is the network master for this node for all connected peers is done by calling Node.is_network_master(). This will return true when executed on the server and false on all client peers.

If you have paid attention to the previous example, it's possible you noticed that each peer was set to have network master authority for their own player (Node) instead of the server:

[...]
# Load my player
var my_player = preload("res://player.tscn").instance()
my_player.set_name(str(selfPeerID))
my_player.set_network_master(selfPeerID) # The player belongs to this peer; it has the authority.
get_node("/root/world/players").add_child(my_player)

# Load other players
for p in player_info:
    var player = preload("res://player.tscn").instance()
    player.set_name(str(p))
    player.set_network_master(p) # Each other connected peer has authority over their own player.
    get_node("/root/world/players").add_child(player)
[...]

Each time this piece of code is executed on each peer, the peer makes itself master on the node it controls, and all other nodes remain as puppets with the server being their network master.

To clarify, here is an example of how this looks in the bomber demo:

Master and puppet keywords

The real advantage of this model is when used with the master/puppet keywords in GDScript (or their equivalent in C# and Visual Script). Similarly to the remote keyword, functions can also be tagged with them:

Example bomb code:

for p in bodies_in_area:
    if p.has_method("exploded"):
        p.rpc("exploded", bomb_owner)

Example player code:

puppet func stun():
    stunned = true

master func exploded(by_who):
    if stunned:
        return # Already stunned

    rpc("stun")

    # Stun this player instance for myself as well; could instead have used
    # the remotesync keyword above (in place of puppet) to achieve this.
    stun()

In the above example, a bomb explodes somewhere (likely managed by whoever is the master of this bomb-node, e.g. the host). The bomb knows the bodies (player nodes) in the area, so it checks that they contain an exploded method before calling it.

Recall that each peer has a complete set of instances of player nodes, one instance for each peer (including itself and the host). Each peer has set itself as the master of the instance corresponding to itself, and it has set a different peer as the master for each of the other instances.

Now, going back to the call to the exploded method, the bomb on the host has called it remotely on all bodies in the area that have the method. However, this method is in a player node and has a master keyword.

The master keyword on the exploded method in the player node means two things for how this call is made. Firstly, from the perspective of the calling peer (the host), the calling peer will only attempt to remotely call the method on the peer that it has set as the network master of the player node in question. Secondly, from the perspective of the peer the host is sending the call to, the peer will only accept the call if it set itself as the network master of the player node with the method being called (which has the master keyword). This works well as long as all peers agree on who is the master of what.

The above setup means that only the peer who owns the affected body will be responsible for telling all the other peers that its body was stunned, after being remotely instructed to do so by the host's bomb. The owning peer therefore (still in the exploded method) tells all the other peers that its player node was stunned. The peer does this by remotely calling the stun method on all instances of that player node (on the other peers). Because the stun method has the puppet keyword, only peers who did not set themselves as the network master of the node will call it (in other words, those peers are set as puppets for that node by virtue of not being the network master of it).

The result of this call to stun is to make the player look stunned on the screen of all the peers, including the current network master peer (due to the local call to stun after rpc("stun")).

The master of the bomb (the host) repeats the above steps for each of the bodies in the area, such that all the instances of any player in the bomb area get stunned on the screens of all the peers.

Note that you could also send the stun() message only to a specific player by using rpc_id(<id>, "exploded", bomb_owner). This may not make much sense for an area-of-effect case like the bomb, but might in other cases, like single target damage.

rpc_id(TARGET_PEER_ID, "stun") # Only stun the target peer

Exporting for dedicated servers

Once you've made a multiplayer game, you may want to export it to run it on a dedicated server with no GPU available. See Exporting for dedicated servers for more information.

Note

The code samples on this page aren't designed to run on a dedicated server. You'll have to modify them so the server isn't considered to be a player. You'll also have to modify the game starting mechanism so that the first player who joins can start the game.

Note

The bomberman example here is largely for illustrational purposes, and does not do anything on the host-side to handle the case where a peer uses a custom client to cheat by for example refusing to stun itself. In the current implementation such cheating is perfectly possible because each client is the network master of its own player, and the network master of a player is the one which decides whether to call the I-was-stunned method (stun) on all of the other peers and itself.