This change allows StyleBox preview to take shadows and content margins into account to display how a whole panel would be rendered.
The preview control clips contents so that in any case it doesn't bleed on controls around.
Fixes#33801
Causes unnecessary computations and drawing, and a division by zero when calculating uv coordinates.
This case happened with ScriptEditor's member overview (ItemList), initialized with a minimum width of 0.
Fixes#33634
- Move GDScript-exposed function definitions from header to source file
- Add null check to functions taking list pointers as parameters
- Call clear() in copy_theme() if null is passed
- No reduced Rect in march square algorithm, it was causing inconsistent cases near the borders and made the outline less accurate
- Ignore invalid generated polygons (under 3 points) to avoid unnecessary errors and crashes
- Error popup only when no polygon could be generated at all
- Added option to shrink pixels (to get rid of small separate islands)
- Fixed polygon preview (lines were sometimes not showing along the borders)
Fixes#32564, #29267
Modified Sprite to use "changed" signal instead of _changed_callback to make it work when tool is disabled (change receptors are editor only).
Fixes#32349
The DynamicFont implementation currently in use is based on
FreeType, which provides much better visual quality.
This old implementation wasn't exposed anywhere, so this shouldn't
break compatibility.
This decreases binary sizes by a few kilobytes.
The previous value (0) was a special case in the fog shader.
It made the shader use the Camera's `far` value as the fog depth end
value, which led to an inconsistency in the fog rendering between
the editor and a running project. This is because the editor camera
uses a `far` property of 500 by default, whereas the Camera node's
`far` property is set to 100 by default.
The new fixed value is equal to the default `far` property in Camera,
which leads to a consistent appearance between the editor and a running
project.
This closes#31686.
The custom color introduced in be8d569744
had the same name as the "folder" icon, which could cause conflicts
in the generated documentation.
The new name is also more self-explanatory.
This makes them easier to distinguish from files for quick
visual grepping.
This can also be used in projects by setting the FileDialog "folder"
color. The default value (`Color(1, 1, 1)`) has no visual impact,
for compatibility with existing projects.
The last remaining ERR_EXPLAIN call is in FreeType code and makes sense as is
(conditionally defines the error message).
There are a few ERR_EXPLAINC calls for C-strings where String is not included
which can stay as is to avoid adding additional _MSGC macros just for that.
Part of #31244.
This makes height fog appear at the bottom of the scene
(instead of the top), which is generally the expected result.
This also tweaks the fog height setting hint to be more flexible.
This closes#30709.
Closes#30994
When modifying the properties of a tileset in the editor, some properties only apply to the first tile (such as the shape offset).
This change resolves that issue by traversing the changes to all of the shapes in the tileset instead of the first one.
For clarity, assign-to-release idiom for PoolVector::Read/Write
replaced with a function call.
Existing uses replaced (or removed if already handled by scope)
Previously there was some transparency hard coded into TextEdit when in read only mode.
This change adds a custom color for adjusting the font in read only mode.
It also applies when syntax highlighting is on.
By default the LineEdit's text when editable is unchecked had some transparency hardcoded.
This change adds a custom color to LineEdit for adjusting the font when editable is off.
Addresses issue 29814
Partial revert of 02319dceb2,
previous code handled this cases without errors and the TileSet and
TileSetEditorPlugin are written with the expectation that those will
not error out.
This is a bit wonky and these classes should likely be refactored,
but until then it's best to keep things as they were.
Fixes#29962.
The setters are called when the property is first initialized, and before
that its default min and max are 0.0 and 1.0 respectively.
If you configured min_value to 1.0 and max_value to e.g. 3.0, since the
min_value setter can be called before that of max_value (which thus still
defaults to 1.0), the min will be set to 0.99.
Same conflict could happen with a configured max_value of 0 if its setter
is called before that of a valid, negative min value.
ResourceFormatLoader and ResourceFormatSaver are meant to be overridden
to add support for different formats in ResourceLoader and ResourceSaver.
Those should be exposed as they can be overridden in plugins.
On the other hand, all predefined subclasses of those two base classes
are only meant to register support for new file and resource types, but
should not and cannot be used directly from script, so they should not
be exposed.
Also unexposed ResourceImporterOGGVorbis (and thus its base class
ResourceImporter) which are editor-only.
This is a new singleton where camera sources such as webcams or cameras on a mobile phone can register themselves with the Server.
Other parts of Godot can interact with this to obtain images from the camera as textures.
This work includes additions to the Visual Server to use this functionality to present the camera image in the background. This is specifically targetted at AR applications.
It's not necessary, but the vast majority of calls of error macros
do have an ending semicolon, so it's best to be consistent.
Most WARN_DEPRECATED calls did *not* have a semicolon, but there's
no reason for them to be treated differently.
This decreases the number of samples significantly, leading to a
notable performance increase with only a very slight loss in
visual quality.
This also tweaks the default SSAO settings to use 3×3 blurring,
which makes noise patterns much less visible.
If a non-imported texture resource file (e.g. DDS) gets updated the editor
doesn't reload it. The cause of the problem is two-fold:
First, the code of ImageTexture assumes that textures are always imported
from an image, but that's not the case for e.g. DDS. This change thus adds
code to issue a resource reload in case an image reload is not possible
(which is the case for non-imported texture resources).
Second, the code is filled with bogus calls to Image::get_image_data_size()
to determine the mipmap offset when that should be done using
Image::get_image_mipmap_offset(). Previous code literally passed the integer
mip level value to Image::get_image_data_size() where that actually expects
a boolean. Thus this part of the change might actually solve some other
issues as well.
To be pedantic, the texture_get_data() funciton of the rasterizer drivers is
still quite a mess, as it only ever returns the whole mipchain when
GLES_OVER_GL is set (practically only on desktop builds) but this change does
not attempt to resolve that.
If bake interval is a multiple of the curve length, the curve would return NaN for some offset values (when `frac == 0.0`, it matches the start and end of the curve segment so `fmod == 0.0`, `frac` becomes NaN)
```
# Godot 3.1.1
var c = Curve3D.new()
c.add_point(Vector3())
c.add_point(Vector3(0.5,0,0))
c.add_point(Vector3(1,0,0))
c.bake_interval = 0.5
c.interpolate_baked(0.5) == Vector3(NAN, NAN, NAN)
```
It seems to stay compatible with formatting done by clang-format 6.0 and 7.0,
so contributors can keep using those versions for now (they will not undo those
changes).
Was getting this error when using a saturate node. This change fixes it.
```
:39 - Invalid arguments for built-in function: max(float,int)
drivers\gles3\rasterizer_storage_gles3.cpp:2150 - Condition ' err != OK ' is true.
```
To follow the glTF 2.0 specification in all cases (including outside
of imported glTF scenes), the blue channel is now used for metallic
and the green channel is now used for roughness.
-Changed Animation to have a special signal when tracks are changed, to avoid unnecesary track cache rebuilds in AnimationPlayer
-Added missing emit_changed whe modifying keys to Animation
-Changed AnimationPlayer to use the new refcounted connections instead of the previous hacky way to keep references
-Changed AnimationEditor to update the current track when keys are edited
-Fixed bug where undo/redo did not work with AnimationKeyEdit (was not being updated)
-Made sure UndoRedo does not mind deleted objects in undo/redo history, this would corrupt the history or clear it without need.
- From now materials assigned to the MeshInstance (not the Mesh) get exported
into the MeshLibrary when such materials exist. This enables workflows where
the MeshLibrary is exported from an imported scene (e.g. GLTF) where the
materials assigned to the Mesh (not the MeshInstance) get overwritten on
re-import, thus can't use editor set materials in the exported MeshLibrary
unless they are assigned to the MeshInstance whose materials get saved with
the inherited scene thus persist across re-imports.
- When appending to an existing MeshLibrary only generate previews for newly
added or modified meshes.
- During preview generation transform camera and lights instead of the mesh
and use the source MeshInstance's transform for the mesh to avoid weird
previews being generated for meshes with a position dependent material
(e.g. when using triplanar mapping).
- Adjust the camera angle and light directions used in mesh preview generation
for better results.
This allows most demos to run without any ubsan or asan errors. There
are still some things in thirdpart/ and some things in AudioServer that
needs a look but this fixes a lot of issues. This should help debug less
obvious issues, hopefully.
This fixes#25217 and fixes#25218
Regression from cd0b82fd56, it must be hidden from docs
(PROPERTY_USAGE_INTERNAL) but not from the editor.
Supersedes and fixes#24880.
Co-authored-by: QbieShay <cislaghi.ilaria@gmail.com>
Fix#24456
The character->rect.size is properly update at DynamicFontAtSize::_bitmap_to_character
so no need to multiply scale again.
It was changed with 5cd12f6649
Fixes the following warnings in `p=server target=release_debug` builds
on Travis CI:
```
./core/os/memory.h: In function 'MainLoop* TestOAHashMap::test()':
./core/os/memory.h:108:111: warning: 'dummy' may be used uninitialized in this function [-Wmaybe-uninitialized]
#define memnew_placement(m_placement, m_class) _post_initialize(new (m_placement, sizeof(m_class), "") m_class)
^
main/tests/test_oa_hash_map.cpp:98:7: note: 'dummy' was declared here
int dummy;
^
scene/resources/bit_mask.cpp:447:3: warning: 'next_i' may be used uninitialized in this function [-Wmaybe-uninitialized]
scene/resources/bit_mask.cpp:448:4: warning: 'next_j' may be used uninitialized in this function [-Wmaybe-uninitialized]
```
- Editor font anti-aliasing can now be disabled in the Editor Settings.
- DynamicFonts used in projects can now have their anti-aliasing
disabled in their DynamicFontData child. Changes will be visible
upon reloading the scene in the editor.
Remove animation loop from ParticlesMaterial and move it to
SpatialMaterial for 3D particles and Particles2D for the 2D case.
Added animation to CPUParticles2D as well as the "Convert to
CPUParticles2D" to the PAarticles2D menu.
Means the list is destroyed before the OS object, allowing it the
opportunity to print an error if there are still dynamic font objects
hanging around.
Disabled signed/unsigned warnings like for GCC/Clang
(warning C4018: '>=': signed/unsigned mismatch).
Fixes the following MSVC 2017 warnings:
```
core\image.cpp(999): warning C4804: '>': unsafe use of type 'bool' in operation
core\io\compression.cpp(178): warning C4334: '<<': result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?)
editor\doc\doc_dump.cpp(226): warning C4334: '<<': result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?)
scene/resources/material.h(289): warning C4334: '<<': result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?)
scene/resources/material.h(298): warning C4334: '<<': result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?)
editor\editor_themes.cpp(379): warning C4805: '==': unsafe mix of type 'int' and type 'bool' in operation
```
Namely:
[-Wunneeded-internal-declaration]
[-Wunused-comparison]
[-Wunused-const-variable]
[-Wunused-function]
[-Wunused-private-fields]
Fixes the following Clang 7 warnings:
```
editor/plugins/script_editor_plugin.cpp:1417:20: warning: function '_find_node_with_script' is not needed and will not be emitted [-Wunneeded-internal-declaration]
editor/scene_tree_dock.cpp:1859:14: warning: function '_find_last_visible' is not needed and will not be emitted [-Wunneeded-internal-declaration]
modules/gdscript/gdscript_parser.cpp:7838:19: warning: equality comparison result unused [-Wunused-comparison]
scene/resources/mesh.cpp:549:35: warning: unused variable '_array_types' [-Wunused-const-variable]
scene/resources/mesh.cpp:563:18: warning: unused variable '_format_translate' [-Wunused-const-variable]
drivers/gles3/rasterizer_scene_gles3.cpp:54:28: warning: unused function 'store_transform2d' [-Wunused-function]
core/io/file_access_network.h:50:6: warning: private field 'ml' is not used [-Wunused-private-field]
core/io/file_access_zip.h:93:14: warning: private field 'archive' is not used [-Wunused-private-field]
core/io/resource_format_binary.h:122:6: warning: private field 'bin_meta_idx' is not used [-Wunused-private-field]
core/message_queue.h:47:9: warning: private field 'mutex' is not used [-Wunused-private-field]
main/tests/test_gui.cpp:63:11: warning: private field 'control' is not used [-Wunused-private-field]
modules/gdscript/gdscript_parser.h:558:7: warning: private field 'completion_static' is not used [-Wunused-private-field]
platform/x11/os_x11.h:148:11: warning: private field 'ip_unix' is not used [-Wunused-private-field]
platform/x11/os_x11.h:180:7: warning: private field 'net_wm_icon' is not used [-Wunused-private-field]
platform/x11/os_x11.h:189:6: warning: private field 'audio_driver_index' is not used [-Wunused-private-field]
platform/x11/os_x11.h:190:15: warning: private field 'capture_idle' is not used [-Wunused-private-field]
servers/physics/body_pair_sw.h:79:6: warning: private field 'cc' is not used [-Wunused-private-field]
servers/visual/visual_server_raster.h:62:7: warning: private field 'draw_extra_frame' is not used [-Wunused-private-field]
```
Fixes the following Clang 7 warnings:
```
core/object.cpp:44:1: warning: '_ObjectDebugLock' defined as a struct here but previously declared as a class [-Wmismatched-tags]
core/variant_call.cpp:43:1: warning: '_VariantCall' defined as a struct here but previously declared as a class [-Wmismatched-tags]
drivers/gles3/rasterizer_storage_gles3.h:765:2: warning: 'MultiMesh' defined as a struct here but previously declared as a class [-Wmismatched-tags]
editor/editor_node.h:794:1: warning: 'EditorProgress' defined as a struct here but previously declared as a class [-Wmismatched-tags]
modules/bullet/rigid_body_bullet.h:230:17: warning: class 'KinematicUtilities' was previously declared as a struct [-Wmismatched-tags]
modules/bullet/space_bullet.h:60:1: warning: class 'btSoftBodyWorldInfo' was previously declared as a struct [-Wmismatched-tags]
scene/resources/world_2d.cpp:40:1: warning: 'SpatialIndexer2D' defined as a struct here but previously declared as a class [-Wmismatched-tags]
scene/resources/world.cpp:39:1: warning: 'SpatialIndexer' defined as a struct here but previously declared as a class [-Wmismatched-tags]
servers/audio/reverb_sw.cpp:60:1: warning: 'ReverbParamsSW' defined as a struct here but previously declared as a class [-Wmismatched-tags]
thirdparty/bullet/BulletSoftBody/btSoftBody.h:43:1: warning: 'btSoftBodyWorldInfo' defined as a struct here but previously declared as a class [-Wmismatched-tags]
```
Fix for incorrect types used in MeshDataTool for bones and weights.
If your mesh contains these memory accesses get OOB and might crash
the application
Closes#21713
Fixes the following GCC 5 warnings:
```
core/io/zip_io.h:128:26: warning: 'zlib_filefunc_def zipio_create_io_from_file(FileAccess**)' defined but not used [-Wunused-function]
core/script_debugger_remote.cpp:110:17: warning: 'ObjectID safe_get_instance_id(const Variant&)' defined but not used [-Wunused-function]
drivers/unix/socket_helpers.h:103:12: warning: 'int _socket_create(IP::Type&, int, int)' defined but not used [-Wunused-function]
drivers/unix/socket_helpers.h:45:15: warning: 'size_t _set_sockaddr(sockaddr_storage*, const IP_Address&, int, IP::Type)' defined but not used [-Wunused-function]
drivers/unix/socket_helpers.h:76:15: warning: 'size_t _set_listen_sockaddr(sockaddr_storage*, int, IP::Type, IP_Address)' defined but not used [-Wunused-function]
editor/editor_fonts.cpp:40:24: warning: 'Ref<BitmapFont> make_font(int, int, int, int, const int*, const Ref<Texture>&)' defined but not used [-Wunused-function]
editor/editor_themes.cpp:85:26: warning: 'Ref<StyleBoxFlat> change_border_color(Ref<StyleBoxFlat>, Color)' defined but not used [-Wunused-function]
editor/import/editor_import_collada.cpp:493:13: warning: 'void _generate_normals(const PoolVector<int>&, const PoolVector<Vector3>&, PoolVector<Vector3>&)' defined but not used [-Wunused-function]
editor/import/editor_import_collada.cpp:524:13: warning: 'void _generate_tangents_and_binormals(const PoolVector<int>&, const PoolVector<Vector3>&, const PoolVector<Vector3>&, const PoolVector<Vector3>&, PoolVector<float>&)' defined but not used [-Wunused-function]
editor/pvrtc_compress.cpp:118:13: warning: 'void _compress_etc(Image*)' defined but not used [-Wunused-function]
modules/etc/image_etc.cpp:89:13: warning: 'void _decompress_etc1(Image*)' defined but not used [-Wunused-function]
modules/etc/image_etc.cpp:93:13: warning: 'void _decompress_etc2(Image*)' defined but not used [-Wunused-function]
modules/gdscript/editor/gdscript_highlighter.cpp:46:13: warning: 'bool _is_whitespace(CharType)' defined but not used [-Wunused-function]
scene/2d/cpu_particles_2d.cpp:510:14: warning: 'float rand_from_seed_m1_p1(uint32_t&)' defined but not used [-Wunused-function]
scene/3d/cpu_particles.cpp:474:14: warning: 'float rand_from_seed_m1_p1(uint32_t&)' defined but not used [-Wunused-function]
scene/resources/default_theme/default_theme.cpp:123:20: warning: 'Ref<Shader> make_shader(const char*, const char*, const char*)' defined but not used [-Wunused-function]
scene/resources/default_theme/default_theme.cpp:130:24: warning: 'Ref<BitmapFont> make_font(int, int, int, int, const int*, const Ref<Texture>&)' defined but not used [-Wunused-function]
```
Had to split `core/io/zip_io.h` into header and .cpp file without 'static' keyword.
Not fixed yet (static definition in header used in some files but not all):
```
modules/websocket/lws_helper.h:111:13: warning: 'void _lws_make_protocols(void*, int (*)(lws*, lws_callback_reasons, void*, void*, size_t), PoolVector<String>, _LWSRef**)' defined but not used [-Wunused-function]
```
Also fixed a couple other warnings missed in previous commits.
Made Debugger's Video Memory tab show correct resource paths.
The Icons are still missing but that is due to the get_icon(type, "EditorIcons") for type = "Texture" being missing. Adding that icon would fix it.
Fixes the following GCC 5 warnings:
```
core/object.h:193:11: warning: 'MethodInfo::flags' will be initialized after [-Wreorder]
core/object.h:192:15: warning: 'PropertyInfo MethodInfo::return_val' [-Wreorder]
core/object.cpp:278:1: warning: when initialized here [-Wreorder]
core/script_debugger_remote.h:97:6: warning: 'ScriptDebuggerRemote::max_cps' will be initialized after [-Wreorder]
core/script_debugger_remote.h:91:6: warning: 'int ScriptDebuggerRemote::max_messages_per_frame' [-Wreorder]
core/script_debugger_remote.cpp:1086:1: warning: when initialized here [-Wreorder]
core/script_debugger_remote.h:98:6: warning: 'ScriptDebuggerRemote::char_count' will be initialized after [-Wreorder]
core/script_debugger_remote.h:92:6: warning: 'int ScriptDebuggerRemote::n_messages_dropped' [-Wreorder]
core/script_debugger_remote.cpp:1086:1: warning: when initialized here [-Wreorder]
modules/bullet/area_bullet.h:102:7: warning: 'AreaBullet::isScratched' will be initialized after [-Wreorder]
modules/bullet/area_bullet.h:92:39: warning: 'PhysicsServer::AreaSpaceOverrideMode AreaBullet::spOv_mode' [-Wreorder]
modules/bullet/area_bullet.cpp:46:1: warning: when initialized here [-Wreorder]
modules/bullet/collision_object_bullet.h:127:15: warning: 'CollisionObjectBullet::space' will be initialized after [-Wreorder]
modules/bullet/collision_object_bullet.h:117:7: warning: 'CollisionObjectBullet::Type CollisionObjectBullet::type' [-Wreorder]
modules/bullet/collision_object_bullet.cpp:67:1: warning: when initialized here [-Wreorder]
modules/bullet/godot_ray_world_algorithm.h:48:7: warning: 'GodotRayWorldAlgorithm::m_ownManifol1d' will be initialized after [-Wreorder]
modules/bullet/godot_ray_world_algorithm.h:46:33: warning: 'const btDiscreteDynamicsWorld* GodotRayWorldAlgorithm::m_world' [-Wreorder]
modules/bullet/godot_ray_world_algorithm.cpp:50:1: warning: when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:91:18: warning: 'GodotAllConvexResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:89:6: warning: 'int GodotAllConvexResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:93:2: warning: when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:142:18: warning: 'GodotAllContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:140:6: warning: 'int GodotAllContactResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:147:2: warning: when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:168:18: warning: 'GodotContactPairContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:166:6: warning: 'int GodotContactPairContactResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:173:2: warning: when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:195:18: warning: 'GodotRestInfoContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:191:7: warning: 'bool GodotRestInfoContactResultCallback::m_collided' [-Wreorder]
modules/bullet/godot_result_callbacks.h:199:2: warning: when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:200:9: warning: 'RigidBodyBullet::gravity_scale' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:199:9: warning: 'real_t RigidBodyBullet::mass' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning: when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:222:28: warning: 'RigidBodyBullet::force_integration_callback' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:219:7: warning: 'bool RigidBodyBullet::isTransformChanged' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning: when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:220:7: warning: 'RigidBodyBullet::previousActiveState' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:208:6: warning: 'int RigidBodyBullet::maxCollisionsDetection' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning: when initialized here [-Wreorder]
modules/bullet/soft_body_bullet.h:69:9: warning: 'SoftBodyBullet::total_mass' will be initialized after [-Wreorder]
modules/bullet/soft_body_bullet.h:68:6: warning: 'int SoftBodyBullet::simulation_precision' [-Wreorder]
modules/bullet/soft_body_bullet.cpp:38:1: warning: when initialized here [-Wreorder]
modules/bullet/soft_body_bullet.h:76:9: warning: 'SoftBodyBullet::drag_coefficient' will be initialized after [-Wreorder]
modules/bullet/soft_body_bullet.h:61:14: warning: 'btSoftBody* SoftBodyBullet::bt_soft_body' [-Wreorder]
modules/bullet/soft_body_bullet.cpp:38:1: warning: when initialized here [-Wreorder]
modules/bullet/space_bullet.h:97:22: warning: 'SpaceBullet::solver' will be initialized after [-Wreorder]
modules/bullet/space_bullet.h:95:35: warning: 'btDefaultCollisionConfiguration* SpaceBullet::collisionConfiguration' [-Wreorder]
modules/bullet/space_bullet.cpp:333:1: warning: when initialized here [-Wreorder]
modules/bullet/space_bullet.h:101:23: warning: 'SpaceBullet::soft_body_world_info' will be initialized after [-Wreorder]
modules/bullet/space_bullet.h:99:23: warning: 'btGhostPairCallback* SpaceBullet::ghostPairCallback' [-Wreorder]
modules/bullet/space_bullet.cpp:333:1: warning: when initialized here [-Wreorder]
modules/gdnative/nativescript/nativescript.h:79:13: warning: 'NativeScriptDesc::base_native_type' will be initialized after [-Wreorder]
modules/gdnative/nativescript/nativescript.h:73:9: warning: 'String NativeScriptDesc::documentation' [-Wreorder]
modules/gdnative/nativescript/nativescript.h:88:9: warning: when initialized here [-Wreorder]
modules/gdscript/gdscript.h:296:6: warning: 'GDScriptWarning::line' will be initialized after [-Wreorder]
modules/gdscript/gdscript.h:294:4: warning: 'GDScriptWarning::Code GDScriptWarning::code' [-Wreorder]
modules/gdscript/gdscript.h:303:2: warning: when initialized here [-Wreorder]
scene/3d/physics_body.h:544:7: warning: 'PhysicalBone::simulate_physics' will be initialized after [-Wreorder]
scene/3d/physics_body.h:543:7: warning: 'bool PhysicalBone::_internal_static_body' [-Wreorder]
scene/3d/physics_body.cpp:2502:1: warning: when initialized here [-Wreorder]
scene/3d/physics_body.h:546:6: warning: 'PhysicalBone::bone_id' will be initialized after [-Wreorder]
scene/3d/physics_body.h:539:12: warning: 'Skeleton* PhysicalBone::parent_skeleton' [-Wreorder]
scene/3d/physics_body.cpp:2502:1: warning: when initialized here [-Wreorder]
scene/3d/spring_arm.h:44:11: warning: 'SpringArm::mask' will be initialized after [-Wreorder]
scene/3d/spring_arm.h:43:8: warning: 'float SpringArm::current_spring_length' [-Wreorder]
scene/3d/spring_arm.cpp:37:1: warning: when initialized here [-Wreorder]
scene/animation/skeleton_ik.h:159:11: warning: 'SkeletonIK::target_node_override' will be initialized after [-Wreorder]
scene/animation/skeleton_ik.h:152:7: warning: 'bool SkeletonIK::use_magnet' [-Wreorder]
scene/animation/skeleton_ik.cpp:418:1: warning: when initialized here [-Wreorder]
scene/resources/tile_set.h:84:9: warning: 'TileSet::AutotileData::size' will be initialized after [-Wreorder]
scene/resources/tile_set.h:83:7: warning: 'int TileSet::AutotileData::spacing' [-Wreorder]
scene/resources/tile_set.h:92:12: warning: when initialized here [-Wreorder]
scene/resources/tile_set.h:115:12: warning: 'TileSet::TileData::tile_mode' will be initialized after [-Wreorder]
scene/resources/tile_set.h:114:9: warning: 'Color TileSet::TileData::modulate' [-Wreorder]
scene/resources/tile_set.h:120:12: warning: when initialized here [-Wreorder]
servers/physics/body_sw.h:84:19: warning: 'BodySW::direct_state_query_list' will be initialized after [-Wreorder]
servers/physics/body_sw.h:57:11: warning: 'uint16_t BodySW::locked_axis' [-Wreorder]
servers/physics/body_sw.cpp:756:1: warning: when initialized here [-Wreorder]
```
Nothing really relevant for us, but it's not a bad consistency
improvement anyway so worth taking.
Fixes GCC 5 warnings of the form:
core/io/http_client.cpp:288:9: warning: enumeration value 'STATUS_SSL_HANDSHAKE_ERROR' not handled in switch [-Wswitch]
core/io/marshalls.cpp:806:9: warning: enumeration value 'AABB' not handled in switch [-Wswitch]
Those can be trivial cases where adding a default fallback is the solution,
or more complex issues/hidden bugs where missed values are actually meant
to be handled.
Fixes the following GCC 5 warnings:
```
core/os/file_access.cpp:49:19: warning: the address of 'FileAccess::create_func' will always evaluate as 'true' [-Waddress]
servers/audio_server.cpp:192:70: warning: comparison with string literal results in unspecified behaviour [-Waddress]
drivers/gles2/rasterizer_storage_gles2.cpp:4095:90: warning: NULL used in arithmetic [-Wpointer-arith]
modules/gdnative/register_types.cpp:237:3: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
platform/android/export/export.cpp:207:1: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
modules/gdscript/gdscript.h:150:67: warning: returning reference to temporary [-Wreturn-local-addr]
servers/physics_2d/collision_object_2d_sw.h:119:56: warning: returning reference to temporary [-Wreturn-local-addr]
servers/physics_2d/collision_object_2d_sw.h:123:56: warning: returning reference to temporary [-Wreturn-local-addr]
servers/physics_2d/collision_object_2d_sw.h:127:50: warning: returning reference to temporary [-Wreturn-local-addr]
servers/physics_2d/collision_object_2d_sw.h:131:52: warning: returning reference to temporary [-Wreturn-local-addr]
editor/plugins/skeleton_editor_plugin.cpp:34:36: warning: extra tokens at end of #include directive
modules/bullet/bullet_types_converter.cpp:31:9: warning: #pragma once in main file
editor/import/editor_scene_importer_gltf.cpp:1996:51: warning: name lookup of 'i' changed
modules/visual_script/visual_script_property_selector.cpp:402:45: warning: name lookup of 'E' changed
scene/gui/tree.cpp:1268:25: warning: name lookup of 'i' changed
scene/resources/visual_shader.cpp:808:32: warning: name lookup of 'i' changed
```
Fixes the following GCC 5 warnings:
```
drivers/gles2/rasterizer_canvas_gles2.cpp:814:8: warning: variable 'rt_size' set but not used [-Wunused-but-set-variable]
drivers/gles2/rasterizer_scene_gles2.cpp:2270:11: warning: variable 'vp_height' set but not used [-Wunused-but-set-variable]
drivers/gles2/rasterizer_scene_gles2.cpp:2673:22: warning: variable 'e' set but not used [-Wunused-but-set-variable]
drivers/gles2/rasterizer_scene_gles2.cpp:715:7: warning: variable 'no_cull' set but not used [-Wunused-but-set-variable]
drivers/gles2/shader_gles2.cpp:693:14: warning: variable 'cc' set but not used [-Wunused-but-set-variable]
drivers/gles3/rasterizer_canvas_gles3.cpp:1226:8: warning: variable 'rt_size' set but not used [-Wunused-but-set-variable]
drivers/gles3/rasterizer_scene_gles3.cpp:3039:10: warning: variable 'contrib' set but not used [-Wunused-but-set-variable]
drivers/gles3/rasterizer_scene_gles3.cpp:4504:32: warning: variable 'vp_height' set but not used [-Wunused-but-set-variable]
editor/editor_inspector.cpp:272:9: warning: variable 'guide_color' set but not used [-Wunused-but-set-variable]
editor/editor_themes.cpp:1067:14: warning: variable 'alpha3' set but not used [-Wunused-but-set-variable]
editor/editor_themes.cpp:263:8: warning: variable 'script_bg_color' set but not used [-Wunused-but-set-variable]
editor/plugins/collision_shape_2d_editor_plugin.cpp:326:11: warning: variable 'cpoint' set but not used [-Wunused-but-set-variable]
editor/plugins/mesh_editor_plugin.cpp:72:9: warning: variable 'size' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:471:12: warning: variable 'mpos' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:89:8: warning: variable 'basetype_color' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:90:8: warning: variable 'type_color' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:92:8: warning: variable 'string_color' set but not used [-Wunused-but-set-variable]
modules/visual_script/visual_script_editor.cpp:2521:7: warning: variable 'seq_connect' set but not used [-Wunused-but-set-variable]
platform/android/export/export.cpp:580:12: warning: variable 'styles_count' set but not used [-Wunused-but-set-variable]
platform/android/export/export.cpp:584:12: warning: variable 'styles_offset' set but not used [-Wunused-but-set-variable]
platform/osx/export/export.cpp:464:9: warning: variable 'zerr' set but not used [-Wunused-but-set-variable]
scene/2d/tile_map.cpp:260:10: warning: variable 'tcenter' set but not used [-Wunused-but-set-variable]
scene/3d/light.cpp:166:7: warning: variable 'editor_ok' set but not used [-Wunused-but-set-variable]
scene/3d/navigation.cpp:566:11: warning: variable 'closest_navmesh' set but not used [-Wunused-but-set-variable]
scene/gui/rich_text_label.cpp:869:8: warning: variable 'size' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:705:14: warning: variable 'xform' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:706:8: warning: variable 'ss' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:726:14: warning: variable 'xform' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:727:8: warning: variable 'ss' set but not used [-Wunused-but-set-variable]
scene/resources/material.cpp:430:7: warning: variable 'using_world' set but not used [-Wunused-but-set-variable]
servers/visual/shader_language.cpp:2026:7: warning: variable 'all_const' set but not used [-Wunused-but-set-variable]
servers/visual/visual_server_scene.cpp:1383:28: warning: variable 'z_max_cam' set but not used [-Wunused-but-set-variable]
```
Also fixes two [-Wunused-value] warnings:
```
scene/gui/text_edit.cpp:4405:20: warning: statement has no effect [-Wunused-value]
servers/visual/visual_server_scene.cpp:905:48: warning: value computed is not used [-Wunused-value]
```
Some of those are bugs and need further work, they are identified with
`// FIXME` comments.
Also turn off -Wsign-compare warnings in the future, we do not consider them important.
Fixes the following GCC 5 warnings:
```
core/node_path.cpp:279:24: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
core/oa_hash_map.h:169:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
core/oa_hash_map.h:314:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/gles2/shader_gles2.cpp:985:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/gles3/rasterizer_storage_gles3.cpp:1075:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/pulseaudio/audio_driver_pulseaudio.cpp:343:34: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/editor_plugin.cpp:525:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/editor_properties_array_dict.cpp:747:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/plugins/spatial_editor_plugin.cpp:2078:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/plugins/spatial_editor_plugin.cpp:4096:27: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/plugins/sprite_editor_plugin.cpp💯20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/cvtt/image_compress_cvtt.cpp:122:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/cvtt/image_compress_cvtt.cpp:134:77: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/cvtt/image_compress_cvtt.cpp:339:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/etc/image_etc.cpp:222:34: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/gdnative/register_types.cpp:242:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/gdnative/register_types.cpp:258:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/opensimplex/simplex_noise.cpp:200:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/opensimplex/simplex_noise.cpp:222:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/opensimplex/simplex_noise.cpp:246:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/android/export/export.cpp:1085:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/android/export/export.cpp:1489:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/android/export/export.cpp:1623:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/iphone/export/export.cpp:206:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/iphone/export/export.cpp:356:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/iphone/export/export.cpp:406:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/iphone/export/export.cpp:493:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/audio_stream_player_3d.cpp:420:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/resources/audio_stream_sample.cpp:565:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/resources/audio_stream_sample.cpp:571:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio/audio_rb_resampler.cpp:156:36: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
```
The following warnings were not fixed, as they implied casting for no gain:
```
core/io/packet_peer.cpp:228:38: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
core/io/resource_format_binary.cpp:109:11: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/gles2/rasterizer_scene_gles2.cpp:144:57: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/unix/file_access_unix.cpp:249:46: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/voxel_light_baker.cpp:889:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/voxel_light_baker.cpp:1020:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/voxel_light_baker.cpp:1154:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/voxel_light_baker.cpp:2255:38: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/resources/bit_mask.cpp:336:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio/audio_stream.cpp:141:49: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio/audio_stream.cpp:150:19: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio/audio_stream.cpp:154:19: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio_server.cpp:86:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio_server.cpp:89:17: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
```
SimplexNoise can be used to generate parameterized fractal noise based on Open Simplex.
NoiseTexture uses SimplexNoise to generate noise textures for using in
shaders/visual effects.
This allows more consistency in the manner we include core headers,
where previously there would be a mix of absolute, relative and
include path-dependent includes.
It's shared by both 2D and 3D particles (+ CPU ones), so it makes sense
to have as a common resource. It also allowed to disable compilation of
Particles (3D) when using 'disable_3d'.
Also cleaned up includes in SpatialEditorGizmos and some other places,
as well as dropped dead code in material_editor_plugin.cpp.
Since this class is editor-oriented, this set_get is necessary to full implement tool, importer, etc... for tiles. (No other way to know a real tile size in autotile mode)
This is to prevent crashes for code like:
...
void Material::set_next_pass(const Ref<Material> &p_pass) {
ERR_FAIL_COND(p_pass == this);
...
that's been fixed in 031f763d4f
The margin value is exposed into the UI for shape ressource.
This value can be modified through set_margin and get from get_margin
or by using the property margin. Each time the margin is modified
the associated collision shape is recreated and the margin value is
used in ShapeBullet::prepare.
- Add pressed state to clear button
- Enable clear button on all inputs with search icon
- Remove duplicate clear buttons
- Fix rendering of icon for center and right alignments
- Add clear button to more search fields
- Add clear icon to default theme
- Add method to control enabled state of clear button
- Add property to enable clear button from inspector
Roughness is now set to 1 by default and albedo is now white,
even on meshes that do not have any materials defined.
This means there is no longer a visual difference between a
mesh with no materials defined and a mesh with a default
SpatialMaterial defined.
Implements an Audio bus effect that outputs the audio from the bus into a wav file
Now channels audio recording into an AudioStreamSample instead of saving to wav
This commit makes operator[] on Vector const and adds a write proxy to it. From
now on writes to Vectors need to happen through the .write proxy. So for
instance:
Vector<int> vec;
vec.push_back(10);
std::cout << vec[0] << std::endl;
vec.write[0] = 20;
Failing to use the .write proxy will cause a compilation error.
In addition COWable datatypes can now embed a CowData pointer to their data.
This means that String, CharString, and VMap no longer use or derive from
Vector.
_ALWAYS_INLINE_ and _FORCE_INLINE_ are now equivalent for debug and non-debug
builds. This is a lot faster for Vector in the editor and while running tests.
The reason why this difference used to exist is because force-inlined methods
used to give a bad debugging experience. After extensive testing with modern
compilers this is no longer the case.
* Prototype faster function call ux.
* Work on general search ux.
* Able to create nodes from search.
* Show class for variables but not methods.
* Get actions search working.
* Descriptions now show for both methods and properties.
* Enable zooming on mouse wheel up and down.
* Make the drag trigger on right mouse button.
* Search now shows for action visual script nodes.
* Able to search visual node names.
* Search works better.
* Change zooming scale to hide artifacts better.
* Remove zoom changes
* Select from base should check properties too like the other functions.
* Seq_connect flag is needed to set sequence lines correctly.
* Remove comment
* Code cleanup with function names and arguments.
* Use brief description for search descriptions.
* Clean and fix bug with input nodes connecting with sequence lines.
* Add a warning and fix some edge conditions with sequence into data lines and vice versa.
* Don't search functions when pulling from a sequence node.
* Don't show actions when pulling from a data line.
* Set set and get properties.
* Convert visual script operators to the correct type
* Create a function preset finds only functions.
* Singletons can now find functions.
* Add shift-a for generic search.
* Add brief descriptions for Visual Script nodes.
* Search boxes can now filter names.
* Add bigger hit zones to node connect.
* For the drop zones, make all the rect2 areas the same size.
* Function names in visual script node should be lower case so that search works better.
* Use the convention of capitalize() for set, set, visual script nodes and methods.
* Make search more general. Ignore "_" and make case-insensitive. Also made the search window smaller and remove extra info from search
* Make type_cast use the connecting node's type and remove use of found variable.
* Fix case where you call an instance's call function where it becomes an invalid call.
* Make get_visual_node_names use a set of filters, move action creations and fix bug with sequence node connections.
* Make the window bigger.
* Make connect_data and connect_seq more robust.
* Add icons to search items.
* Add vs constructors in shift-a menu.
* Operators, builtins and constructors show type name. Fix several problems with port connections.
* In shift-a mode search everything.
* Code cleanup
* Work on autocompleting the type.
* Use type guess in action creation.
* Check if type hint string exists in object variables when generating the visual script search.
* Add the hint to SceneTree.
* Add original type detection.
* Make type casting great again. This puts the type casted base type as the data output type string hint.
* Pass the type in a VisualScriptFunctionCall too.
* Set the base type correctly in VisualScriptFunctionGet and VisualScriptFunctionSet using hint string.
* Make sure the instance is passed in VisualScriptPropertySet.
* Restore search on the node's type.
* Remove dependencies from graph_edit.
* Remove dependencies from property_selector and name the class visual_script_property_selector.
* Extract hot zones into a function.
* Move hot_zones constants into default theme.
* Bigger capture zones.
* Clean messy port_grab_distance variables.
* Remove RMB functionality.
* Remove memory leak on showing visual script descriptions.
* Read the port_grab_distance constants on enter tree and theme changed.
Some classes use Font::get_char_size directly and not only for
autowrapping. RichTextLabel is one such example. So this commit
reverts aa8561d (PR #17504) and instead ceils character width within
Label. This makes sure Label autowraps correctly while not affecting
other Font clients.
Fixes#18835.
Fixes#15787.
The issue occurred when two (or more) separate DynamicFont instances
used the same DynamicFontAtSize instance due to having equal
properties. The first instance updated its data_at_size and emitted
"changed" signal, but the second did not because it considered the
data_at_size to be up to date, even though it has just been updated.
- Implement outlines based on FreeType Stroker API. This allows
artifact-free results, similar to what you will see in Web or any text
editing tools. Outline is a part of DynamicFont rather than Label,
because outlines have to be baked into the font's atlas. Font has a
default outline_color and a Label can specify font_outline_modulator
that will be multiplied with the Font's color to get the final result.
- draw_char now has to be called twice to fully render a text - first
with p_outline == true for each character and then with
p_outline == false for each character.
- Number of draw-calls is reduced from 5 to 2 per outlined character.
- Overall cleanup of DynamicFont code, extracted duplicated code pieces
into separate methods.
- The change is backward-compatible - Labels still have outline
properties that work exactly as they worked before.
Closes#16279.
-Missing Icons
-Missing freezing option (for baking light and faster load)
-Missing a way to export from Godot (GLTF2?)
-Probably buggy (may freeze editor, can be worked around easily, but let me know if this happens so it's easier to catch bugs)
Happy testing!
Since create_outline can only make outline for PRIMITIVE_TRIANGLES,
when QuadMesh (which is PRIMITIVE_TRIANGLE_FAN) is used to create
outline, will leave `arrays` empty, and crash when it is being indexed
for "indices" subarray.
This PR shows error when there's only one surface and it is not
TRIANGLES. Also prevent the crash if it has more than one surface
and none of them are TRIANGLES (and any other cases that could leave
`arrays` empty) by checking the size of `arrays` == 8 before indexing
it, since the method seems to expect `arrays` to be of that size.
ProgressBar used the center size of the stylebox to calculate its minimum size, thus disallowing certain setups.
If the old behaviour is wanted, it can be forced by providing a custom minimum size, or by giving proper margins to the stylebox.
Fixes#17779.
They work exactly the same as current checkbox-decorated items, but in order to preserve compatibility, separate methods are used, like `add_radio_check_item()`. The other option would have been to add a new parameter at the end of `add_check_item()` and the like, but that would have forced callers to provide the defaults manually.
`is_item_checkable()`, `is_item_checked()` and `set_item_checked()` are used regardless the item is set to look as check box or radio button.
Keeping check in the name adds an additional clue about these facts.
Closes#13055.
Fixes#15459. When oversampling is enabled, glyphs may have fractional
size, but they are still rendered into integral pixels, which results in
them taking more space than was anticiped by autowrapping algorithm. The
solution here is to return ceiled width, which makes autowrapper
consider characters a bit larger than they are, but it doesn't hurt the
actual rendering and ensures there is enough space for the characters.
- Editor font hinting can now be tweaked in the Editor Settings.
- DynamicFonts used in projects now have tweakable hinting settings
in their DynamicFontData child. Changes will be visible upon
reloading the scene in the editor.
The previous logic with VERSION_MKSTRING was a bit unwieldy, so there were
several places hardcoding their own variant of the version string, potentially
with bugs (e.g. forgetting the patch number when defined).
The new logic defines:
- VERSION_BRANCH, the main 'major.minor' version (e.g. 3.1)
- VERSION_NUMBER, which can be 'major.minor' or 'major.minor.patch',
depending on whether the latter is defined (e.g. 3.1.4)
- VERSION_FULL_CONFIG, which contains the version status (e.g. stable)
and the module-specific suffix (e.g. mono)
- VERSION_FULL_BUILD, same as above but with build/reference name
(e.g. official, custom_build, mageia, etc.)
Note: Slight change here, as the previous format had the build name
*before* the module-specific suffix; now it's after
- VERSION_FULL_NAME, same as before, so VERSION_FULL_BUILD prefixed
with "Godot v" for readability
Bugs fixed thanks to that:
- Export templates version matching now properly takes VERSION_PATCH
into account by relying on VERSION_FULL_CONFIG.
- ClassDB hash no longer takes the build name into account, but limits
itself to VERSION_FULL_CONFIG (build name is cosmetic, not relevant
for the API hash).
- Docs XML no longer hardcode the VERSION_STATUS, this was annoying.
- Small cleanup in Windows .rc file thanks to new macros.
Found via `codespell -q 3 --skip="./thirdparty,./editor/translations" -I ../godot-word-whitelist.txt`
Whitelist consists of:
```
ang
doubleclick
lod
nd
que
te
unselect
```
Notable potentially breaking changes:
- PROPERTY_USAGE_NOEDITOR is now PROPERTY_USAGE_STORAGE | PROPERTY_USAGE_NETWORK, without PROPERTY_USAGE_INTERNAL
- Some properties were renamed, and sometimes even shadowed by new ones
- New getter methods (some virtual) were added
Using `misc/scripts/fix_headers.py` on all Godot files.
Some missing header guards were added, and the header inclusion order
was fixed in the Bullet module.
remove code that will never run
make definition and declaration names for parameters match
change floats that were being set to bool values
remove pointer that is never used
-Fixes to unwrapper (remove degenerates), makes Thekla not crash
-Added optional cancel button in EditorProgress
-Added function to force processing of events (needed for cancel button)
The bug generated a "blue circle" at the bottom end of the y axis,
and probably one too at the other end.
This is caused by a normalization of a vector which results in its y component
to be sometimes > 1.0 or < -1.0 in Clang.
This value is then used with acos(), which returns NaN.
Fixes#11247
-Added unwrap functionality to Mesh
-Ability to display and debug mesh UVs
-Added multiline draw, so it's easier and faster to draw UVs
-Many fixes to SurfaceTool
-Fixes to Thekla Unwrap, but it's a piece of ass and it keeps crashing. Will have to go away
It had been missed in d09160a8b6 and broke compilation
for those platforms.
Took the opportunity to run clang-format on the code base to fix some corner cases
that went through our static tests/were overlooked recently.
Schlick's approximation and GGX are orthogonal concepts.
Furthermore, it's usage so far has been inconsistent: we don't even use it with anisotropic SchlickGGX, and Burley (Disney) diffuse does use it while its name doesn't indicate it.
The use of Schlick's approximation in Burley and GGX is an implementation detail and doesn't need to be reflected to the namig.
Prior to this, the value assumed for the interval between the start of the track and the first frame would be the one of the first key if
- *seeking/playing a continuous track*;
- *seeking a discrete track*.
And the first key would be ignored until reached -thus not modifying the target property/transform- in the remaining case; namely, *playing a discrete track*.
In other words, the inner workings of the animation system considered the unreached first key for interpolation but not for a query of every key inside a time range.
With this changes, the first key is only considered is the animation is looped and ignored otherwise. That way, in order to have a start value, you'll need an explicit key at the very beginning of the track, while having the flexibility of the animation player not touching the target value until the first key is reached.
This corresponds to the point 1) of #10752.
I am fixing the issue by adding DATA_PAD to the return pointer as
suggested by hi-ogawa
When using set_data in AudioStreamSample in PoolByteArray, the data is set
using a DATA_PAD to pad the pointer to the correct place as such
uint8_t *dataptr = (uint8_t *)data;
copymem(dataptr + DATA_PAD, r.ptr(), datalen);
data_bytes = datalen;
godot/scene/resources/audio_stream_sample.cpp#L473
All I am doing is adding a DATA_PAD to the return pointer to
get_data() in AudioStreamSample to change
godot/scene/resources/audio_stream_sample.cpp#L48
PoolVector<uint8_t>::Write w = pv.write();
copymem(w.ptr(), data, data_bytes);
to
PoolVector<uint8_t>::Write w = pv.write();
uint8_t *dataptr = (uint8_t *)data;
copymem(w.ptr(), dataptr + DATA_PAD, data_bytes);
Please review whether or not set or get is correct.
Because this issue seems to be fixable by removing DATA_PAD in set_data()
instead of adding DATA_PAD to get_data(). I have not tested the latter
fix
Fixes #issue, 11873
Added proper label sizing
Improved text editor status bar
Fixed some issues with ItemList and also some style fixes
Added background to color picker samples (the mrcdk fix)
Fixed slider ticks.
Added VS breakpoint and error styleboxes.
Rename user facing methods and variables as well as the corresponding
C++ methods according to the folloming changes:
* pos -> position
* rot -> rotation
* loc -> location
C++ variables are left as is.
- simplefied it with using the new rtl.
- removed ("ScriptPanel", "EditorStyles") for since rtl now can be used
- unified backgrounds when script editor color is set to transparent => option to set background color adapt to theme is deprecated.
-Make sure handles are always visible (on top)
-Fixed instanced scene selection (should work properly now)
-Added interpolated camera
-Customizable gizmo colors in editor settings
Currently we rely on some undefined behavior when Object->cast_to() gets
called with a Null pointer. This used to work fine with GCC < 6 but
newer versions of GCC remove all codepaths in which the this pointer is
Null. However, the non-static cast_to() was supposed to be null safe.
This patch makes cast_to() Null safe and removes the now redundant Null
checks where they existed.
It is explained in this article: https://www.viva64.com/en/b/0226/
The 'pos' variable passed to get_color() and get_offset() can be
negative if the color ramp itself is empty. This causes a lookup in an
empty position in the color Vector which leads to a crash.
We add a check so we never do a lookup in the color Vector if the
gradient is empty.
This fixes#10501
- added a normal stylebox to label. default is StyleBoxEmpty
- changed drawing so that it draws correct with styleboxes with margins
- changed the LineEdit in the import to use a label with the lineEdit
stylebox
- removed only the bindings because the drawing code is not done yet
- kept c++ functions for setting individual border color for future implementation
- corner and border are decreased if necassary to achoieve clean stylboxes
- prohibits wired drawing artifacts when using wrong values
- corner radius are relative to the partner corner when they would result in glitches
These include:
* generate_tangents()
* add_to_format()
* create_from()
* append_from()
Reordered and grouped the bindings to match the header for improved readability.
Removed commented out `generate_flat_normals()` method which wasn't present
in the header.
Fixes#9946
-Added new 3D stream player node
-Added ability for Area to capture sound from streams
-Added small features in physics to be able to properly guess distance to areas for sound
-Fixed 3D CollisionObject so shapes are added the same as in 2D, directly from children
-Fixed KinematicBody API to make it the same as 2D.
-Added ability to set/get a field in GetSet, as well as assignment ops
-Added a Select node
-Fixed update bugs related to variable list and exported properties, closes#9458
Fix bad return type in CollisionObject2D, Shape -> Shape2D. Was causing unintended null when casting. (9409)
Fix a misplaced ++ operator. (9370)
Fix merging with exiting tileset duplicating shapes. (9370)
- Removed atlas_changed signal for AtlasTexture
- Changes are now handled by _notify_change
- Removed unneccesary signal connections
- Texture preview now updates in real-time
Fixed TextureRegionEditor constantly regenerating
-Fixed referencing of world_transform in fragment shader not working
-Fixed unsycn bug related to getting shader param list from the server
-Fixed getting all textures from shader properly, fixes#8353
Adds the following resources:
- CapsuleMesh: a capsule object
- CubeMesh: a cube that can be subdivided
- CylinderMesh: a cylinder
- PlaneMesh: a horizontal plane that can be subdivided
- PrismMesh: a prism shape
- SphereMesh: a sphere
- QuadMesh: reintroduction of the original quadmesh
Removes the old Quad and TestCube nodes
-Added default environment editor setting
-Added environment created by default in new projects
-Removed default light and ambient from spatial editor, to make the editor more PBR compliant
Fixes a bunch of the most spammy console errors introduced by recent refactorings:
- `AudioServerState` does not exist, this was the reference to it in the source. The surrounding code made it clear that `AudioServerLayout` was meant to be used instead.
- `StreamCSVTranslation` same here, it's the only reference. I went with `Translation` here, but I'm not 100% sure on this one.
- Some methods have been moved from `Texture` to `Image`, but the old bindings were still there.
- A few `name == ""` errors related to duplicating nodes.
"ALL IS GOOD" was a lie.
In particular, removes verbose "path not recognized" false positive.
The actual logic is to (somewhat naively) check all ResourceFormatLoaders
and to pick the first good match, so no need to warn about the formats
that do not match the type hint.
Added set_scale, set_rotation_euler, set_rotation_axis_angle. Addresses #2565 directly.
Added an euler angle constructor for Basis in GDScript and also exposed is_normalized for vectors and quaternions.
Various other changes mostly cosmetic in nature.
I can show you the code
Pretty, with proper whitespace
Tell me, coder, now when did
You last write readable code?
I can open your eyes
Make you see your bad indent
Force you to respect the style
The core devs agreed upon
A whole new world
A new fantastic code format
A de facto standard
With some sugar
Enforced with clang-format
A whole new world
A dazzling style we all dreamed of
And when we read it through
It's crystal clear
That now we're in a whole new world of code
- Add FIXME tags comments to some unfixed potential bugs
- Remove some checks (always false: unsigned never < 0)
- Fix some if statements based on reviews.
- Bunch of missing `else` statements
This fixes HashMap where a key or part of a key is a floating point
number. To fix this the following has been done:
* HashMap now takes an extra template argument Comparator. This class
gets used to compare keys. The default Comperator now works correctly
for common types and floating point numbets.
* Variant implements ::hash_compare() now. This function implements
nan-safe comparison for all types with components that contain floating
point numbers.
* Variant now has a VariantComparator which uses Variant::hash_compare()
safely compare floating point components of variant's types.
* The hash functions for floating point numbers will now normalize NaN
values so that all floating point numbers that are NaN hash to the same
value.
C++ module writers that want to use HashMap internally in their modules
can now also safeguard against this crash by defining their on
Comperator class that safely compares their types.
GDScript users, or writers of modules that don't use HashMap internally
in their modules don't need to do anything.
This fixes#7354 and fixes#6947.
Serialize dictionaries adding newlines between key-value pairs
Serialize group lists also with newlines in between
Serialize string properties escaping only " and \ (needed for a good diff experience with built-in scripts and shaders)
Bonus:
Make AnimationPlayer serialize its blend times always sorted so their order is predictable in the .tscn file.
This PR is back-compat; won't break the load of existing files.
clang-format does not handle that well *at all*.
For the reference, found the relevant pieces of code with:
`ag "=[ "$'\t'"]?"$'\n'"[ "$'\t'"]?{" --ignore=thirdparty`
It supports unlimited width, color gradient, texture and some geometry
options for joints and caps. Also transparency without artifacts
(provided that line joints aren't too sharp).
This means that each time this scene is instanced, the resource will be unique!
As such, thanks to this, the following features were implemented:
-ButtonGroup is no longer a control, it's now a resource local to the scene
-ViewportTexture can be created from the editor and set to any object, making ViewportSprite and other kind of nodes obsolete!
-Changed SectionedPropertyEditor to support this
-Renamed Globals singleton to GlobalConfig, makes more sense.
-Changed the logic behind persisten global settings, instead of the persist checkbox, a revert button is now available
That year should bring the long-awaited OpenGL ES 3.0 compatible renderer
with state-of-the-art rendering techniques tuned to work as low as middle
end handheld devices - without compromising with the possibilities given
for higher end desktop games of course. Great times ahead for the Godot
community and the gamers that will play our games!
Done with `autopep8 --select=E7`, fixes:
- E701 - Put colon-separated compound statement on separate lines.
- E702 - Put semicolon-separated compound statement on separate lines.
- E703 - Put semicolon-separated compound statement on separate lines.
- E711 - Fix comparison with None.
- E712 - Fix (trivial case of) comparison with boolean.
- E713 - Fix (trivial case of) non-membership check.
- E721 - Fix various deprecated code (via lib2to3).
-Most 2D drawing is implemented
-Missing shaders
-Missing all 3D
-Editor needs to be set on update always to be used, otherwise it does not refresh
-Large parts of editor not working
-Block switches to 2d/3d editor if editing visual script
-Added cast node in flow control
-Added ability to do RPC in visual script
-Comment nodes
-Fix bug with inverted cable in connecting backwards
-Copy and paste nodes, including from different scripts
The text format definition needs to stay in `scene/` as it relies
on other scene components, and `core/` must stay self-contained.
This reverts commits a5e27503fd
and 1492fd8460.
This reverts commits 8884b8f519bd5c8f2aa0
and 5cb31f6d5b.
<reduz> Akien, I understand the need for the second loop mode, but I think
the current UI is pretty confusing. I think this should be changed for an
enum, both there and in the animation.. otherwise we should revert it
[...]
<reduz> alternatively this could be added per track, which I think should
make it a little less confusing
Reopens #959..
-Made it possible to change the editor theme
-Added two options to theme editor plugin to create empty template themes and editor themes
-Make sure that saved themes to .tres keep the null theme fields, to make it easier to keep those when saving/loading the theme
Add texture region support for StyleBoxTexture.
Quick region(texture region and scale region) selection for StyleBoxTexture with TextureRegionEditorPlugin.
-Rearrange favorites in fs dock with drag and drop
-Removed import -> sub-scene, moved to scenetree contextual menu
-Removed import -> re-import , moved and integrated to FS dock
-Added ability in FS dock to re-import more than one resource
simultaneously
-Added ability to drag from native filesystem explorer to Godot, only
works on Windows though
-Removed scene reimport merge options, never worked well. Eventually
merging materials should be re-added
-Added ability to set custom root node type when importing scenes
-Re-Import is now automatic, can be configured back to manual in editor
settings
-Added resource previews in property list for many resource types
-Made asset sharing support https
-Many fixes to HTTPRequest
-Added an asset installer dialog
-Visual cleanups to asset sharing tab
-Fixed some issues in ScrollContainer, hope it does not break things
-Asset sharing tab is not visible (hidden on purpose) for now.
-Scene edit state is saved outside the scene now, to avoid changes .tscn files when nothing really changed
-Created a VariantWriter helper to unify all variant to text writing
-Moved SceneFormatText writing to VariantWriter
-Moved ConfigFile to use VariantWriter and VariantParser, added compatibility mode for old .cfg files that use engine.cfg format
All classes were reviewed apart from VisualServer for which no argument name is documented at all.
While doing this review, I found quite a few bugs that were fixed either in earlier commits or this one (mostly documentation bugs though, i.e. some arguments were listed at the wrong place).
-Visible 2D and 3D Shapes, Polygons, Tile collisions, etc.
-Visible Navmesh and Navpoly
-Visible collision contacts for 2D and 3D as a red point
-Customizable colors in project settings
-Fixes long-standing issues regarding to playing a single stream multiple times simultanteously
-Fixes wrong-looping, starting, caching, etc. Issues resulting from bad original design
-Allows more interesting kinds of streams (stream graphs with streams inside streams!) in the future
This push changes the binary and XML formats and bumps the major version to 2.0. As such, files saved in this version WILL NO LONGER WORK IN PREVIOUS VERSIONS. This compatibility breakage with older versions was required in order to properly provide project refactoring tools.
If I were you, unless you are brave, I would wait a week or two before pulling, in case of bugs :)
Summary of Changes
-New Filesystem dock, with filesystem & tree view modes.
-New refactoring tools, to change or fix dependencies.
-Quick search dialog, to quickly search any file
A general speedup should be apparent, with even more peformance increase when compiling optimized.
WARNING: Tested and it seems to work, but if something breaks, please report.
-ability to edit multiple scenes at the same time
-resource internal IDs are now persistent, this makes multiple scene
editing possible but maaaaay result in file corruption bugs (tested and
could not find anything but possibility exists because core code
changed, report immediately if you find this).
-properly save settings, layout, etc when edited
-script editing is independent from scene editing now
-show a yellow box when a script belongs to the scene
-ItemList control for easier lists/thumbnails
-New file dialog, with support for thumbnails, favorites, recent places,
etc
-Moved .fscache out of the project, no more bugs due to committed/pulled
.fscache!
-Dir dialog now sorts directories
-=-==-=-=-=-=-=-
-Small fixes in canvas item light shader
-Fixed compilation in server target
-Export for Android makes 32 bits display as default
-changed version to 1.1beta1
-input now correctly works when using viewport scaling
-added function to get areas/bodies in given point
-added function to get space state directly from world
-=-=-=-=-=-=-=-=-=-
-Moved drawing code to a single function that takes linked list (should make it easier to optimize in the future).
-Implemented Z ordering of 2D nodes. Node2D and those that inherit have a visibility/Z property that affects drawing order (besides the tree order)
-Removed OpenGL ES 1.x support. Good riddance!
this fixes the cubemap ressource editor bug described in issue #908.
some other littles fixes will be required to allow the Environment
ressource to create and load Cubemap Ressources more easily
-Working area is bigger now, solves #1148
-Using Position now works, fixes#1141
-RGB ops now work, fixes#1139
-Missing bindings to GraphEdit and GraphNode added
-Shader Graph Editor Shows errors on cyclic links and missing connections
-=-=-=-=-=-=-=-=-=-=-=-=-=-=
-Removed "density" property
-Added instead more flexible "angular damp" and "linear damp"
-Added ability to override angular and linear damp in rigidbody
-Added gravity scale option rigidbody
Test well and iron out bugs, when it works the same will be moved to 3D
-work in progress new graph system (will replace current one)
-crash fix in s3m loader (out of bounds acess)
-fixed vbox overriding of separation (fixes empty line between section tabs)
-=-=-=-=-=-=-=-=-=-
-Massive improvement to code completion
-Argument hinting for functions
If you manage to out-smart the code-completion in a situation where completion
should be possible to guess, let me know.
Please enter the commit message for your changes. Lines starting
-=-=-=-=-
-Fixed problem with scaling shapes (#827), related to not taking scale in consideration for calculating the moment of inertia
-Added support for multiline strings (or comments) using """
-Save subscene bug, properties not being saved in root node (#806)
-Fix Crash in CollisionPolygon2DEditor (#814)
-Restored Ability to compile without 3D (#795)
-Fix InterpolatedCamera (#803)
-Fix UV Import for OBJ Meshes (#771)
-Fixed issue with modifier gizmos (#794)
-Fixed CapsuleShape gizmo handle (#50)
-Fixed Import Button (not properly working in 3D) (#733)
-Many misc fixes (though no new features)
-Fixed many bugs in stretch mode
-Fixes to camera project and unproject as consequence of the above
-added setget to script (documented in script doc)
-more fixes to collada exporter for blender
-=-=-=-
-Fixed some DAE import & export bugs
-Changed Collada exporter to use the mesh loops API
-Added tangent export to Collada exporter
-Added triangulation option to Collada exporter
-Changed a little how normalmaps are handled in shader. Not sure if it's working properly, be careful.
-Fixed some strange bug with kinematic bodies #776
-Fix release compilaiton issues #782
-=-=-=-=-=-
-fix duplicate function bug when creating script callback in editor
-fix bug where hiding lights does not work
-fix 2D audio listener bug (romulox_x reported)
-fix exported properties with inheritance bug
-fix timer autostart (make it not work on editor)
-reactivate first camara found if viewport runs out of active camera
-option to hide gizmos in viewport
-changed skeleton gizmo because it sucks
-Make convex shapes using CollisionShape visible (use quickhull class)
-fix up menu when editing a mesh, to export collision, navmesh, convex, etc. from it.
-make a menu option to show SRGB in 3D editor views by default
-make option to edit default light direction in viewport settings
-make option to edit default ambient light in viewport settings
-make software conversion of linear->RGB if hardware support not found
-=-=-=-=-=-=-=-=-=-=
Build System:
-Big clean up of SCons, changed how builds are done to a much cleaner method (check the Github Wiki for instructions).
-Deactivated BlackBerry10 (sorry), if no mantainer found (or BlackBerry does not send us a Passort ;), platform will be removed as we have no longer devices to test.
Engine:
-Removed deprecated object and scene format (was in there just for compatibility, not in use since a long time).
-Added ability to open scenes even if a node type was removed (will try to guess the closest type).
-Removed deprecated node types.
-=-=-=-=-=-=-=-=-=-=-
-Fixes to Collada Exporter (avoid crash situtions)
-Fixed to Collada Importer (Fixed Animation Optimizer Bugs)
-Fixes to RigidBody/RigidBody2D body_enter/body_exit, was buggy
-Fixed ability for RigidBody/RigidBody2D to get contacts reported and bodyin/out in Kinematic mode.
-Added proper trigger support for 3D Physics shapes
-Changed proper value for Z-Offset in OmniLight
-Fixed spot attenuation bug in SpotLight
-Fixed some 3D and 2D spatial soudn bugs related to distance attenuation.
-Fixed bugs in EventPlayer (channels were muted by default)
-Fix in ButtonGroup (get nodes in group are now returned in order)
-Fixed Linear->SRGB Conversion, previous algo sucked, new algo works OK
-Changed SRGB->Linear conversion to use hardware if supported, improves texture quality a lot
-Fixed options for Y-Fov and X-Fov in camera, should be more intuitive.
-Fixed bugs related to viewports and transparency
Huge Amount of New Stuff:
-=-=-=-=-=-=-=-==-=-=-=-
-Ability to manually advance an AnimationPlayer that is inactive (with advance() function)
-More work in WinRT platform
-Added XY normalmap support, imports on this format by default. Reduces normlmap size and enables much nice compression using LATC
-Added Anisotropic filter support to textures, can be specified on import
-Added support for Non-Square, Isometric and Hexagonal tilemaps in TileMap.
-Added Isometric Dungeon demo.
-Added simple hexagonal map demo.
-Added Truck-Town demo. Shows how most types of joints and vehicles are used. Please somebody make a nicer town, this one is too hardcore.
-Added an Object-Picking API to both RigidBody and Area! (and relevant demo)
- #672 (default user:// in $HOME/.godot/app_userdata (linux/osx) and $APPDATA/Godot/app_userdata (Windows)
- #676 (draw both tiles and octants in order from top to bottom, left to right )
- #686 (unicode escape sequences work now)
- #702 (was not a bug, but a test was added to see if bodies went too far away)
-=-=-=-=-=-=-
-Fixed a few bugs in Mixer, now playback of chiptunes works great :)
-Changed how visibility AABB generation from skeletons work, it's fully automatic and real-time now, generated from current skeleton pose for the frame.
-Fixed camera in 3D kinematic character demo.
-=-=-=-=-=-=-=-=-=-=-=-=-=-
3D Physics:
-Fixed "Bounce" parameter in 3D
-Fixed bug affecting Area (sometims it would not detect properly)
-Vehicle Body has seen heavy work
-Added Query API for doing space queries in 3D. Needs some docs though.
-Added JOINTS! Adapted Bullet Joints: and created easy gizmos for setting them up:
-PinJoint
-HingeJoint (with motor)
-SliderJoint
-ConeTwistJoint
-Generic6DOFJoint
-Added OBJECT PICKING! based on the new query API. Any physics object now (Area or Body) has the following signals and virtual functions:
-input_event (mouse or multitouch input over the body)
-mouse_enter (mouse entered the body area)
-mouse_exit (mouse exited body area)
For Area it needs to be activated manually, as it isn't by default (ray goes thru).
Other:
-Begun working on Windows 8 (RT) port. Compiles but does not work yet.
-Added TheoraPlayer library for improved to-texture and portable video support.
-Fixed a few bugs in the renderer, collada importer, collada exporter, etc.
-=-=-=-=-=-
-Fixed small bugs all around
-Added ability to show/hide entire sections of the spatial (3D) tree
-WIP new vehicle (not ready yet) based on Bullet
-=-=-=-=-=-=-=-=-=-=-=-=-=
-Begin work on Navigation Meshes (simple pathfinding for now, will improve soon)
-More doc on theme overriding
-Upgraded OpenSSL to version without bugs
-Misc bugfixes
-=-=-=-=-=-=-=-=-=--=-=-=
-Ability to set 2D nodes as bones
-Abity to set 2D nodes as IK chains
-2D IK Solver
-Improvements in the UI for adding keyframes (separate loc,rot,scale buttons)
==========
-NOTIFICATION_WM_QUIT fixed on android (seems tha way this is reported changed in newer sdk)
-WIP implementation of APK Expansion APIs for publishing games larger than 50mb in Play Store
-Feaures in the new tutorials are all present in the sourcecode
-This (hopefully) should get rid of the animation list order getting corrupted
-Improved 3D Scene Importer (Skeletons, Animations and other stuff were not being merged). Anything missing?
-In code editor, the automatic syntax checker will only use file_exists() to check preload() else it might freeze the editor too much while typing if the preload is a big resource
-Fixed bugs in PolygonPathFinder, stil pending to do a node and a demo
-=-=-=-=-=-=-=-=-=-=-=-=-=-
-More parameters to ESM shadows
-LightMap Octree now can bake to "hdr" (use HDR8 for now)
-New resource PolygonPathFinder, polygon based pathfinder using A-star algorithm. (will add nodes to use it more easily soon)
-=-=-=-=-=-
-ESM Shadow Mapping for softer and less glitchy shadows
-HDR Pipeline (convert to Linear on texture import, convert to SRGB at the end)
-Fix to xml parse bug
-=-=-=-=-=-=-=-=-=-=
-Sprite3D and AnimatedSprite3D support.
-Opaque pre-pass works, is compatible with shadows
-Improved shadow map rendering (can differentiate between plain opaque and opaque with shaders/discard/etc)
-Added option to use alpha discard in FixedMaterial
-Improved Glow FX, many more options (three modes, Additive, Screen and SoftLight), strength and scale
-Ability for Background (image or cubemap) to send to glow buffer
-Dumb Deploy of clients now actually works in Android
-Many Many rendering fixes, 3D is much more usable now.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=
-Auto indenter in code editor, this makes it much easier to paste external code.
-Zoom in 2D viewport now uses the mouse pointer as reference.
-Obscure hack to see where code/line of GDScript in C++ backtrace.
-Fixed a bug where keys would get stuck on X11 if pressed simultaneously
-Added Api on IP singleton to request local IPs.
-Premultiplied alpha support when importing texture, editing PNGs and as a blend mode.
-IMA-ADPCM support for samples, this means that sound effects can be compressed and use 4 timess less RAM.
-New 3D import workflow based on Wavefront OBJ. Import single objects as mesh resources instead of full scenes. Many people prefers to work this way. Just like the rest of the imported resources, these are updated in realtime if modified externally.
-Mesh resources now support naming surfaces. This helps reimporting to identify which user-created materials must be kept.
-Several fixes and improvements to SurfaceTool.
-Anti Aliasing added to WorldEnvironment effects (using FXAA)
-2D Physics bodies (RigidBody, KinematicBody, etc), Raycasts, Tilemap, etc support collision layers. This makes easy to group which objects collide against which.
-2D Trigger shapes can now also trigger collision reporting in other 2D bodies (it used to be in Area2D before)
-Viewport render target textures can now be filtered.
-Few fixes in GDscript make it easier to work with static functions and class members.
-Several and many bugfixes.
-Object Manipulator Gizmo keeps proper scale in all windows and projections, (configurable on settings too).
-Manipulator gizmos for other objects (camera, shapes, etc) massively improved and bug-fixed.
-Manipulator gizmos are different for edited object and other objects.
-Properly highlight manipulator gizmo handles when hovered.
-Fixed bugs in fragment program when using more than 1 light together.
-Reload png/jpg files automatically in editor if edited externally.
-Added 4-stages Parallel Split Shadow Mapping, to improve shadow quality in large scenarios
-Added PCF13 to improve smoothness of shadow borders
-General optimization of directional light shadow mapping for Orthogonal,PSM and PSSM.
-Fixed normal mapping when importing DAE files, works nicely now.
-fix some menus
-fixed bug in out transition curves
-detect and remove file:/// in collada
-remove multiscript for now
-remove dependencies on mouse in OS, moved to Input
-avoid fscache from screwing up (fix might make it slower, but it works)
-funcref was missing, it's there now
-load() was in the GDScript docs but missing in the scripting-different music for platformer 2D and 3D
-fix how documentation is generated, built in doc browser should be always up to date
-copypaste, scrolling, etc in builtin doc
-built-in scripts get saved now (though debugger may not always work on them)
-Theme can be set to controls as a property
-made GUI Theme editor usable
-editor does not allow to export or create .pck in the same path as a project
-changed .pck format (lacked support for versioning so couldn't change it), previous was causing crashes and is now incompatible, just re-export.
-will not look for .pck files recursively, was causing unexpected behaviors
-fixed execution of Godot in paths with non unicode characters in Windows, OSX and Linux.
-fixed TouchScreenButton with stretch2d
-fixed(?) OSX crash on startup (test!!)
-compilation fixes on windows
-CollisionPolygon editor works again
-find buttons en find dialog
-TileMap editor cleanup (removed "error", made nicer)
-viewport flicker fixed
-make .scn default extension for saving scenes
-export the rest of the network classes to gdscript
